SPL REPAIR TO INTERNAL ROAD AT 331 MED REGT UNDER GE DEHRADEUN

Amount

Scarifying and picking graveled macadam or bituminous macadam surfaces in area exc.400 sqm and depth exc 50mm but n exc. 100mm and removel of aggregate complete all as specified and directed.

M&L for providing 75 mm thick WBM in with coarse aggregate lime stone/sand stone of grading 2 spread rolled and consolidated to gradient and chamber with 8 to 10 Ton power rolled complete all as specified and directed.

M&L for preparing of un surfaced water bound macadam by brushing with wire brushes for removing caked mud etc. and sweeping with mechanical broomers and finally fanning the cleaned surface with air compressors to removed all loose dirt and applying evenly priming tack coat with bituminous primer @ 10Kg/10 sqm using viscosity grade Bitumen VG-10 complete all as specified and directed.

M&L for premix bituminous macadam consolidated thickness (50mm or less) thick with 4% binder content by weight of total mix using viscosity grade Bitumen VG-30 any penetration laid/rolled to required gradient and camber using power road roller complete all as specified and directed. Note:- Preparing surface and priming coat on bituminious macadem shall be measured and paid seperately.

M&L for providing bituminous premix semi dense asphaltic concrete 30 mm consolidated thickness with 5.5% binder content by weight of total mix, using viscosity grade Bitumen VG-30 rolled with 8 to 10 tonne power roller and compacted to required camber and gradient complete all as specified and directed.

M&L for preparing of black top surface by brushing with mechanical boomer for removing caked mud etc. and sweeping with mechanical boomer and finally with air compressor to remove all loose dirt etc and finally fanning the cleaned surfaces with gunny bags to removed all loose dirt etc and applying evenly a priming/tack coat with bituminous primer at 5 kg per 10 sqm using viscosity grade Bitumen VG-10 over black top surface complete all as specified and directed.

M&L for providing bituminous premix semi dense asphaltic concrete 40 mm consolidated thickness with 5.5% binder content by weight of total mix, using viscosity grade Bitumen VG-30 rolled with 8 to 10 tonne power roller and compacted to required camber and gradient complete all as specified and directed.

M&L for preparation of road surfaces and applying thermoplastic reflective paint in marking of minimum 2.5mm thick single coat as in centre line and edge line road marking of 150/100 mm width using 'HOT MARK' thermoplastic paint (hot application) white/ yellow by indigenous modern propelled road marking machine as directed including all ingredients such as blinder, glass beads Titanium dioxide calcium carbonate inter fillers, thermoplastic requirement for glass beads shall be the table No 800.4 of MORTH specification including spraying of glass beads etc all as per manufacture instructions complete all as specified and directed.

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed.

Sharda Enterprises

M/S Hind Constructions

M/s Himanshu Tyagi

doon infrastructure

M/S BRIJPAL SINGH MALIK