Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.6 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹46.4 L+₹98,400 (2.17%)Rejected-Finance SURJANAGAR ALIPURDUAR | ALIPURDUAR | ALIPURDUAR | WEST BENGAL | 736121 | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹48.0 L+₹2.6 L (5.65%)Rejected-Finance MES CHOWPATTI HASIMARA DIST JALPAIGURI WB PIN 735215 | HASIMARA | JALPAIGURI | WEST BENGAL | 735215 | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 4 | L4₹48.4 L+₹3.0 L (6.54%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 5 | L5₹48.4 L+₹3.0 L (6.68%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
19 Jul 2023, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (SOUTH) BINNAGURI
GE (SOUTH) BINNAGURI, PO - BINNAGURI, DISTT - JALPAIGURI, PIN - 735232
PERIODICAL SERVICE ( INTERNAL AND EXTERNAL ) TO CERTAIN BLDGS AND OTHER MISC WORKS AT HASIMARA MIL STN AND IMTRAT AREA UNDER GE (SOUTH) BINNAGUR
2023_MES_606700_1
8589/E8
Open Tender
Civil Works
Item Rate
180 days
GE (SOUTH) BINNAGURI
AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE (SOUTH) BINNAGURI
₹90,000
Yes
19 Aug 2023
28 Jun 2023
21 Jul 2023
28 Jun 2023
19 Jul 2023
12 Jul 2023
Amount
M & L for preparing old decorated surface of walls by brooming down or by steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil & greasy spots and applying one coat of white wash to walls including cornices all as specified and dircted.
M & L for preparing old decorated surface of walls by brooming down or by steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil & greasy spots and applying one coat of white wash to ceiling all as specified and dircted.
M & L for preparing old decorated surface of walls by brooming down or by steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil & greasy spots and applying one coat of distemper oil emulsion all as specified and dircted.
M & L for preparing old decorated surface of wall/chajja by brooming down or by steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and applying one coat of cement base paint on surface of wall/chajja all as specified and dircted.
M & L for preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint all as specified and dircted.
M & L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) all as specified and dircted.
M & L for preparing old decorated surface of walls and applying one coat of weather proof exterior emulsion paint of approved colour and shade all as specified and as directed by the Engineer - in - Charge.
M & L for Complete removal of existing treatment of any type from walls and applying one coat or more coats of wall care putty on walls/ ceilings to obtain a smooth surface including making good any undulations on the surfaces complete all as directed by Engineer in Charge.
M & L for writing letters or figures (Block, Roman, Italic or Indian) not exceeding 30 cm high with synthetic enamel paint all as specified and dircted.
Taking down cement plaster on brick or concrete wall surface including racking out joints, hacking for key, scrubbing down with water, etc.all as specified and dircted.
M & L for rendering 15 mm thick in two coats (10mm+5mm each) on fair faces of brick work or concrete surfaces in cement mortar 1:4, mixed with integral water proofing compound with weight of cement in top layer as per manufacturer's instructions and fin
Supply only integral water proofing compound. (Make : SIKA / CICCO No. 1/ACCOPROOF)
M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) and finished even and smooth without using extra cement all as specified and dircted.
M & L for preparing newly applied surface of wall care putty on walls by sand paper , remove spots etc. and applying Two coat of distemper oil emulsion all as specified and dircted.
M & L for preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer all as specified and dircted.
M & L for preparing newly plastered surfaces of walls and applying three coats of white wash.on wall all as specified and dircted.
Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs/ blankets any thickness including cover fillets complete all as specified and directed.
M&L for non Asbestos ,fibre reinforced standard cement board as in celiling ,4mm thick designer board (610mm x 610mm ) & Anodised aluminium snap grid frame work for false ceiling complete all as specified and as directed
Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.
M&L Brick work using Fly Ash bricks with sub class 'B' bricks curved on plan with mean radius not exc 6m with bricks roughly cut to radius or bricks with wedge shaped joints built in cement mortar 1:6 complete all as specified and directed.
Hacking out old broken glass of any thickness size,quality or description from metal frames and S&F 3mm thick sheet glass with glazing clips and oil putty complete as directed by EIC.
Hacking out old broken glass of any thickness size,quality or description from wooden frames and S&F 3mm thick sheet glass with servieable wooden beads complete as directed by EIC.
Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed.
M&L for non skid ceramic coloured tiles of design as approved by GE 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed.
M&L for non skid ceramic coloured tiles of design as approved by GE 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in vertical surface /skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including rendering 10 mm thick in cement mortor 1:4 complete all as specified and directed.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed.
M&L for point wiring complete with 1.5 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LS cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit not less that 20mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LS (ISI marked) as earth continuity conductor connected to common earth dolly, fabricated sundn terminal box made out of GI sheet steel not less than 1.22 mm thick for boxes upto a size of 200 x 300mm and above this size not less than 1.63 mm thick duly painted with aluminum inside and anticorrosive paint outside, concealed in walls, with 3mm thick bakelite/plastic laminated sheet top cover fixed with cadmium plated iron screws for housing switches, socket outlets, fan regulators etc duly earthed including cutting chases of existing wall for conduits and sinking for boxes and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCBs or bus bar shall be done through proper size copper/brass thimbles. Where concealing of conduit is not feasible ie on surface of roof etc, conduit shall be fixed on surface with necessary saddles at no extra cost all as specified and as directed for the following :- (a) One light point controlled by one way switch 5/6 amps.
(b) One ceiling fan/Exhaut fan point controlled by one way switch 5/6 amps.
(d) One socket out let 5/6 amps point on the independent board
(e) One bell/buzzer point controlled by one bell push button
All as per item No 27 above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board complete all as specified and directed.
M&L point wiring with FRLSH PVC insulated unsheathed multistranded copper conductor,conforming to IS-694 of size 1.50 sqmm nominal cross sectional area single core drawn in and including 20/25mm size 'medium grade' PVC doubled lock Casing-Capping and fittings, including, pressed steel concealed terminal switch boxes not less than 1.2mm thick of reqd size factory made duly painted inside and outside with two coats of black bituminous paint over one coat red oxide primer, 3mm thick plastic laminated sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed. (a) One light point controlled by one way switch 5/6 amps.
(b) One ceiling fan/Exhaut fan point controlled by one way switch 5/6 amps.
(c) One Socket out let 5/6 amps point on the independent board
(e) One bell/buzzer point controlled by one bell push button
All as per item No 32 above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board complete all as specified and directed.
S&F switch piano flush type 5/6 amps single pole one way complete all as specified and directed.
S&F in repair switch piano flush type 5/6 amps single pole one way complete all as specified and directed.
S&F socket 2 in 1, 5 Pin, 5/6 amps, white ivory finish flash type complete all as specified and directed.
S&F in repair socket 2 in 1, 5 Pin, 5/6 amps, white ivory finish flash type complete all as specified and directed.
S&F of socket outlet 2 in 1, 5 Pin, 5/15 amp, multipurpose 230 volt flash type complete all as specified and directed by Engr-in-Charge.
S&F in repair socket outlet 2 in 1, 5 Pin, 5/15 amp, multipurpose 230 volt flash type complete all as specified and directed by Engr-in-Charge.
S&F Switch socket combination 2 in 1, 5A, multipin, flush type
S&F in repair Switch socket combination 2 in 1, 5A, multipin, flush type
S&F Switch socket combination 3 pin 16A, multi pin, flush type
S&F in repair Switch socket combination 3 pin 16A, multi pin, flush type
S&F switch piano flush type 15/16 amps single pole one way complete all as specified and directed.
S&F in repair switch piano flush type 15/16 amps single pole one way complete all as specified and directed.
S&F bell/buzzer push 5/6 amps flush type white/ivory finish complete all as specified and directed.
S&F of call bell ding dong type AC Single pole 220/240 Volts, surface type complete all as specified and directed.
S&F Ceiling rose, surface type with back plate, three terminal /PVC/ polycarbonate, isolated body complete all as specified and directed.
S & F lamp holder, isolated body, with back plate suitable for batten/angle fittings complete all as specified and directed.
S & F deluxe fan electronic regulator 230 volts AC 50 Hzs rotary step white/ivory finish complete all as specified and directed.
S&F, IP 20, class I, LED tube light fittings 20W (or nearest next higher wattage) (4feet), wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up with and including necessary taking down the old unserviceable fitting complete all as specified.
S&f LED recessed mounted light (2'×2'),36 w suitable for indoor space including provision of three core PVC cable of copper conductor of size 23/.0076 and making connection complete all as specified and directed Make :Philips Cat No.RC380B LED 36S - 6500 G5 L60W60PSU OD SG, Havells,Bajaj or equivalent.
S & F LED bldg security light fittings 35 Watt ,230 VAC outdoor type with high pressure die cast aluminium housing, heat resistant, toughned glass cover with IP66 protection complete all as spedified and as directed.
S&F IP 20, Class I, LED Mirror light fitting10 W, (or nearest next higher wattage) wall /Surface mounted with aluminium housing 2 feet long, integrated type, with high efficiency PMMA diffuser, integrated high efficiency electronic driver & surge suppressor of 2 KV or more, luminaire efficacy > 95 lumens/Watt, power factor >/ 0.90, operating range – 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/square blocks, screws etc with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size including necessary taking down the old unserviceable fitting complete all as specified.
S&F Sheet metal enclosure for 8 way Distribution Boards (DB’s), double door, single pole & neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB"S/lsolators complete including taking down the old one complete all as specified and directed by Engr-in-Charge.
S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), IP-43 double door, Tripple pole & neutral with 200 amps rated bus bar, IP-20 protection, including four pole MCCB 63 Amps with blanking plates complete all as specified and directed.
S&F MCB, Triple pole & neutral, 32 amps, 415 volts, ‘C’ curve, 10 KA all complete including taking down the old one complete all as specified and directed by Engr-in-Charge.
S&F MCB, Single pole & neutral 6 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete including taking down the old one complete all as specified and directed by Engr-in-Charge.
S&F MCB, Single pole, 6 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete including taking down the old one complete all as specified and directed by Engr-in-Charge.
Supply and fixing MCCB 100 amps 4 pole adjustable thermal & fixed magmetic setting four pole 415 volt 50 Hz with breaking capacity 10 KA including taking down the old one complete all as specified and directed by Engr-in-Charge.
Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. all as pecified and as directed
M &L for Earthing complete with GI earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25M deep below normal ground level) with top edge of the plate not less than 1.5m below normal GL. Connected to galvanized earth lead wire 4mm dia by means of nut, bolt, check nut and washers including necessary excavation and earth work in soft/loose soil, GI protection pipe light grade 15mm bore for protecting the GI wire mesh funnel alternate layer of charcoal dust, and salt PCC pit 1:3:6 type C1 using 20mm graded stone aggregate and 50mm thick RCC 1:2:4 type BO using 20mm graded stone aggregate cover re-inforced with 8 mm dia MS TMT bars 80mm C/C both ways complete all as specified and shown in Electrical plate No.3 SSR part-1 and connected to the earth point and testing complete including taking out the old one complete all as specified and directed by Engr-in-Charge.
M&L for street light bracket made out of GI pipe light grade 25 MM dia 1.2 mtr length bent to shape and reduced to required size at top upto 1.2 mtr length by cutting, welding and well finishing including MS clamp of flat iron of size 25 x 5 mm suitable length 2 Nos complete with drilling hole, fixing with runts bolts and washers including painted with two coats aluminium paint over a coat of red oxide primer.
Taking down ceiling fan/exhaust fan sealing cable end, dismantling blades and removing fan and blades to store complete all as specified by Engr in charge
M & L for painting of ceilling fan of any make/model and size complete with one coat of 1st grade quality of synthetic white enamelled paint by spraying including preparation of old paianted surface to remove all dust, oil mark etc and filling cavaties with filler materials, before painting , complete writing the MES numbers on ceiling fan with flack synthetic enamel paint of 1st grade quality by stenciling with uniform size of letters/of figures n.exc 20 mm in height letters/figures to be written in each fan complete all as spedified and directed.
M & L for rewinding of coils of ceiling fans of sweep 1200/1400 mm of any make by using super enamelled copper wire as per existing gauge and approved quality including heat varnishing drying up overhauling and testing complete all as specified and as directed.
All as per item ser No 69.00 here-in -above but of exhaust fan of sweep 300mm to 380mm
Supply only parts /components of ceiling fan as per existing make and size complete all as specifed and as directed (Note : Parts and components supplied under this item shall be fixed under item No 69 and 70 here in before). (a) Gun metal bush metal bush of any size.
(b )Ball bearing . Make : NBC/ABC/SKF
(c) Paper condenser 2.5 MFD (Make: USHA/SHARITTA/KEITRON/UNIVERSAL
(d) Connector bakelite two terminal each end
(e) Rubber bush with MS bolt and nut
(f) PVC canopy for ceiling fan of Make: USHA/GEC/POLAR/HIMADRI/CROMPTON/KASSELS as applicable.
Supply only parts /components of exhaust fan as per existing make and size complete all as specifed and as directed (Note : Parts and components supplied under this item shall be fixed under item No 71 here in before). (a) Gun metal bush bearing
(b) Ball bearing (Make: NBC/SKF/ARC/ANT)
(c) Paper condenser 4 MFD (Make: USHA/SHARITTA/KEITRON/UNIVERSAL
(d) Set of exhaust fan blades with screws (Set of three blades) (Make: GEC/UNIVERSAL)
M & L in replacement for down rod of 30 cm height fabricated out of MS pipe 12mm dia heavy duty duly painted with white paint suitable to ceiling fan of any description , make , brand and model after taking down old existing unserviceable down rod complete all as directed at site.
M & L in replacement for MS louvers with nuts, bolts and washers suitable to exhaust fan 300/450 mm sweep of any description make and model after taking down old existing unserviceable PVC MS louvers complete all as directed.
M&L in replacement for suitable frames of 300/450 mm sweep exhaust fan of any description make and model after taking down old existing unserviceable frames complete all as directed.
M & L in replacement for standard MS clamps with rubber shoe with bolts suitable to exhaust fan of any description, make and model after taking down old existing unserviceable clamps complete all as directed.
Supply fix in repairs blade set (set of three blades) 1200/1400 mm sweep as per existing make and size all as specified and directed.
Hanging only ceiling fan and connecting up including provision of flexible cable from ceiling rose or connector to fan complete all as specified and directed
Taking out Sheet metal enclosure of 12/8/6/4/2 way Distribution Boards from its original position and refixing after the B/R work /or any directions by engr-in-charge at the same place complete all as specified and as directed.
M & L Sub main wiring casing caping type with two run single core cable PVC insulated cable with 6.0 Sqmm (Nominal area) multi stranded copper conductor FRLS cable 1100 volts gde incl earth continuity conductor using PVC insulated cable of stranded copper conductor of size 6.0 Sqmm connected to common earth dolly and drawing into rigid PVC casing caping of size 32 mm medium grade size, making good the disturbed surfaces complete including taking down old submain wiring.(NOTE : Two run of submain wiring cable alongwith one run of earth wire shall be measured as one length. Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ
SHRI SURAJIT SIKDER
BHARAT ELECTRIC
M/S. JOGINDER KUMAR GOYAL
M/S RATHIN ENTERPRISES
M/S. KUMAR CONSTRUCTION CO.
M/S ROY ENTERPRISE
M/S ANIL KUMAR BAUL
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .