Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.8 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹2.0 L+₹18,729.20 (10.3%)Rejected-AOC 0701 DISTRICT TREASURY CHENGANNUR | ALAPPUZHA | KERALA | 686534 | L2 | Rejected-AOC L2 |
| Sl No | Description | Qty | Unit | ANIYAN PILLAI A S L1 | DINU CHACKO L2 |
|---|---|---|---|---|---|
| 1.00Detailed Estimate | |||||
| 1.00 | 18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | 500 | Litre | 12.15 ₹6,075 Lowest | 15 ₹7,500 |
| 1.00 | OD89885/2025-2026:Supplying and fixing 1 H.P Motor Pump including all fittings and labour charges etc. complete | 1 | each | 9,684.98 ₹9,684.98 Lowest | 25,000 ₹25,000 |
| 1.00 | 50.9.12.1:Providing and fixing Thomson Multi wood board or equivalent make, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately) as per the direction of site Engineer-in-charge. | 45.16 | sqm | 2,551.04 ₹1,15,204.97 | 2,000 ₹90,320 Lowest |
| 1.00 | OD89891/2025-2026:Providing and fixing 12 mm thick frameless toughened glass for cubicles top (based on spec. 21.18) | 2.4 | sqm | 4,488.45 ₹10,772.28 | 200 ₹480 Lowest |
| 1.00 | 9.65.1:Providing and fixing ISi marked oxidised M.S. door latches conforming to IS:5930
with screws etc. complete : (Copper oxidized as per IS : 1378).300x20x6 mm | 9 | no | 103.33 ₹929.97 Lowest | 200 ₹1,800 |
| 1.01 | 9.165.1:Providing and fixing bright /matt finished Stainless Steel handles of approved
quality & make with necessary screws etc all complete.125 mm | 17 | no | 125.99 ₹2,141.83 Lowest | 200 ₹3,400 |
| 1.01 | 9.115:providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer -in-charge. | 12 | set | 445.21 ₹5,342.52 | 200 ₹2,400 Lowest |
| 1.01 | 9.114.2:Providing and fixing magnetic catcher of approved quality in cupboard/ward robe shutters, including fixing with necessary screws etc. complete.Double strip (horizontal type) | 6 | no | 42.81 ₹256.86 Lowest | 200 ₹1,200 |
| 1.01 | 26.11:Providing and fixing concealed hinge of approved quality for 19-20mm thick door with stainless steel screws complete : | 12 | no | 144.93 ₹1,739.16 Lowest | 200 ₹2,400 |
Tender Value
₹1.8 L
EMD Value
₹4,546
Closing Date
22 Aug 2025, 3:00 pmClosed
Assistant Executive Engineer
PWD Buildings Subdivision Thiruvalla
DEPOSIT Construction of Smart Village Office Niranam Providing Furniture cubicle and other connected works to Smart Village Office Niranam using Tender Savings work General Civil Work
2025_PWD_787316_1
PWD/BLDG/TR/12246/2025_5_1_1/1
Open Tender
Civil Works - Buildings
Item Rate
90 days
Thiruvalla
Please refer tender documents
10 documents required · 10 mandatory
₹555
₹4,546
13 Oct 2025
16 Aug 2025
25 Aug 2025
16 Aug 2025
22 Aug 2025
16 Aug 2025
Amount
Detailed Estimate
18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
OD89885/2025-2026:Supplying and fixing 1 H.P Motor Pump including all fittings and labour charges etc. complete
50.9.12.1:Providing and fixing Thomson Multi wood board or equivalent make, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately) as per the direction of site Engineer-in-charge.
OD89891/2025-2026:Providing and fixing 12 mm thick frameless toughened glass for cubicles top (based on spec. 21.18)
9.65.1:Providing and fixing ISi marked oxidised M.S. door latches conforming to IS:5930 with screws etc. complete : (Copper oxidized as per IS : 1378).300x20x6 mm
9.165.1:Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.125 mm
9.115:providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer -in-charge.
9.114.2:Providing and fixing magnetic catcher of approved quality in cupboard/ward robe shutters, including fixing with necessary screws etc. complete.Double strip (horizontal type)
26.11:Providing and fixing concealed hinge of approved quality for 19-20mm thick door with stainless steel screws complete :
50.6.1.4:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete
4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
13.4.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)
2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil
50.18.9.12.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 20 mm dia 10Kgf/cm2 External work- Exposed on wall
50.18.9.14.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10 Kgf/cm2 - External work- Exposed on wall
21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)
18.53.1:Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore
18.18.3:Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:25 mm nominal bore
DINU CHACKO (BID ID -2297844)
Bidder Name
ANIYAN PILLAI A S
DINU CHACKO
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1294810.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .