WBPWDAENEESDeNIQ2024252ndcall

Amount

Taken down the existing fan from its original position i.e, Ceiling / Wall and re-fixing the same after overhauling and repairing: 48'' sweep Ceiling Fan

9 "/ 12''/ 16" / 24" sweep Exhaust fan

12'' / 16" sweep Wall bracket fan

Washing and cleaning different fan blade,cover/ net with soap and water.

Overhauling Cleaning ,washing, greasing,heat varnishing the 48'' sweep ceiling fans, 9" / 12'' / 24" sweep Exhaust fans 12'' / 16" sweep Wall bracket fan including testing.

Opening the fans, cutting burnt out coil from stator, cleaning the stator, testing, rewinding by supplying super enamelled copper wire of appropriate gauge, minilex paper mica sheet, changing the loops overhauling ,greasing ,backing ,heat varnishing and refitting the same & testing. 48’’ sweep AC ceiling fans

9 "/ 12'' / 24" sweep Exhaust fan

12'' / 16" sweep Wall bracket fan

S&F of split pin. (Good Quality)

S&F set screw. (Good Quality)

S&F Jam nut. (Good Quality)

S & F rubber insulator. (Good Quality)

Supply & fixing of condenser carrier in place of damaged one including screw etc.

Supply & fixing of new bush bearing against defective one as and where it will be neccessary.

Supply & changing suitable size new bush bearing set for wall fan, Exhaust fan, Stand fan etc .(Make approved by E.I.C)

S & F 2.5 MFD Metal body Condenser(oil filled) Make- TIBCON

S & F 4.0 MFD Metal body Condenser(oil filled) Make- TIBCON

S & F Ball Bearing Set (TATA/SKF) 6200 / 6201 / 6202 / 6203

Patch repairing of the ceiling fan / wall fan / exhaust / pedestal fan

Supply and fixing of new shaft in place of old shaft on lathe/ other arrangement with necessary machining and processing

Fan stator Shaft welding,lathe cutting and polishing.

Making proper curving, straightening of defective fan blade and its sang to original finish at Co.’s Workshop.

Changing the starting and running coil loop including the side connection wire and also heat varnishing complete as per E.I.C.

S & F 16 SWG GI Safety Wire with necy.Nut- bolt - Washers etc. as approved by PWD as per direction of EIC.

S/Drawing of 2X1.0sq.mm.downrod wire from ceiling rose to connector.(Make approved by EIC)

Painting the existing down rod with approved paint and making necessary connection as required.

Painting the existing Exhaust fan( Frame, full body, blades, canopy etc.) with approved paint and making necessary connection

Loading, Unloading & Carrying charges from site to Co's workshop with to & fro.

(Note: Buy back amounting Rs. 1500/- for unservicble fan parts)

(Rates provided here inclusive of all taxes and duties)

NITYA ELECTRIC (BID ID -6134215)

J AND N ENTERPRISE (BID ID -6139891)