SPECIAL REPAIRS TO BUILDING NO P-77, P-78 AND P-79 AT AF STATION PHALODI

Amount

Taking down cement plaster of any description on brick or cement concrete or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.complete all as specified and directed.

M&L for rendering 15 mm thick in two layers on stone masonry surfaces or on other than fair faces of brick/PCC block masonry of walls (first layer 10mm thick in cement mortar 1:6 and second layer 5mm thick in CM 1:4 mixed with WPC 3% by wt of cement) and finishing the surface even and smooth without using extra cement complete all as specified and directed. Note :- Supply only WPC shall be measured and paid separately under respective item and complete all as specified and directed.

Supply only integral water proofing compound ISI marked as approved complete all as specified and directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces of walls in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and directed.

M&L for plastering 5mm thick on concrete surface of ceiling in CM 1:3, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing newly plastered walls surfaces and applying two coats of cement base paint over one coat of alkali-resistant priming paint complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying two coats of oil bound distemper (OBD) over and including one coat of chalk whiting preparatory to distempering complete all as specified and directed.

M&L for preparing newly plastered surfaces and applying three coats of white wash on ceiling/soffits of chajjas complete all as specified and directed.

M&L for preparing old surfaces plastered or unplastered surfaces of ceilings and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old plaster surfaces of walls and applying one coat of oil emulsion distemper (OBD) complete all as specified and directed.

M&L for preparation of old plaster surfaces of walls and applying one coat of cement based paint complete all as specified and directed.

M&L for preparation of new or previously untreated wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old painted wooden surfaces and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted steel surfaces and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Taking down wooden/steel chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.50 Sqm each including hardware/iron mongery complete all as specified and directed.

Taking down wooden/steel chowkats or frames with shutters (without taking off shutters from the frame) exc.1.50 Sqm but not exc. 4.00 Sqm each including hardware/iron mongery complete all as specified and directed.

Taking down shutters of any description exc 1.0 sqm and n exc 2.0 sqm each including hardware/iron mongery complete all as specified and directed.

S&F 300 mm long aluminum alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts or extruded section or cast aluminum alloy and fix complete all as specified and directed.

----ditto---- but 200mm long

S&F aluminium anodised barrel tower bolts of extruded section 200mm long complete all as specified and directed.

S&F 100mm size butt hinges, heavy weight, cold rolled mild steel complete all as specified and directed.

S&F 100mm size extruded aluminium anodised handles fabricated type of extruded section fixed with screws to shutters complete all as specified and directed.

S&F 150mm size extruded aluminium anodised handles fabricated type of extruded section fixed with screws to shutters complete all as specified and directed.

S&F 150mm long (over all length of cover plate) floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring etc. complete all as specified and directed.

S&F 35mm thick factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles(Hollock), prepared to receive glass/gauge etc without sash bars, edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass/gauge etc. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed. Note :- Glass/gauge required shall be measured and paid separately.

S&f stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 35mm thick factory made second class hard wood (Hollock) plain framed, paneled door shutters (two panel) with lock rail and panel of 9 mm B.W.P. marine grade plywood bonded with high quality liquid phenol formaldehyde synthetic resin adhesive conforming to IS-710 or 12 mm thick particle board veneered with commercial veneering on both faces. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed.

S&F pressed steel frames of size 125X60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete complete all as specified and directed.

S&F MS holdfast, hook and pintle hinges, large hasp and staples, clamps, hooks for hanging fans and similar small articles conforming to Fe-290 Gde E-165 including necessary welding etc. and fixed in position. all as specified and directed.

M&L for PCC 1:2:4, type B-1 (using 20mm graded stone aggregate) as in bed blocks for hold fasts including mould/form work and finishing the surface even and smooth without using extra cement complete all as specifies and directed.

Cutting holes in stone / brick walls built in cement mortar for inserting hold fast & making good dismantled portion in CM (1:3) depth of embedded portion of holdfast exc half brick but n exc one brick complete all as specified and directed.

S&F 300mm mild steel ordinary rat tail rod pattern springs, including rollers and roller plate complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as specified and shown on serial pages No. 142, 143, 144 , 145 & 146 of SSR 2010 (Part-II) and Particular specification & as directed by Engineer-in-charge. Note :- (i) Doors shall be of make :- Rajshri Plastiwood / Sintex /Rotomould / Rotomatic.(ii) The PVC doors shall be fixed as per manufacturer's instructions and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, supplying & fixing in opening as per specification & drawing.

M&L for 18/19mm thick particle board, medium density, flat pressed, single line layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work in repairs complete all as specified and directed.

S&F in repairs continuous (piano) hinges,40mm width of flaps (when open), mild steel, bright finish or elecrogalvanised complete all as specified and directed.

S&F 75mm size hasp and staple, safety type, aluminium anodised including bold to hinge plate and fixed with screws complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handles and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel ventilators with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

Dismantling floor, hearth/wall tiling including cement mortar bedding (but not backing coat), pointed in any mortar, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement sand mortar 1:6 for laying floor finished complete all as specified and directed.

----ditto---- but as in skirtings including 10mm thick rendering with cement mortar 1:4.

M&L for coloured glazed ceramic tiles 300 mm x 200mm x 7mm thick, on vertical surfaces such as skirting. dados & risers to steps etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including rendering coat of 10 mm thick in cement sand mortar 1:4 complete all as specified and directed.

M&L for light shade vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles n. exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement sand mortar 1:6 for laying floor finished complete all as specified and directed.

M&L for light shade vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as on vertical surfaces such as skirting or dado etc set and jointed in neat cement slurry & pointed in cement with admixture to match the shade of tiles over and including 10 mm thick rendering layer in CM 1:4 complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over and including 20mm thick cement screed base of cement mortar 1:6 laid and jointed with grey cement slurry and mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for 15mm thick kota stone slab in risers of steps, skirting, dado and pillar laid over 10mm thick cement rendering in cement mortar 1:4 and jointed with grey cement slurry and mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for 20mm thick granite flooring ( of any type) machine cut, including 20mm thick screed bed of cement mortar 1:6 ,bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

M&L for 20mm thick granite ( of any type) machine cut, in risers of steps, skirting/ dados including 10mm thick rendering cement mortar 1:4 ,bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps and similar situations

Taking down existing cast iron soil/waste pipe of any length size fixed on wall/laid in floor with fittings including cutting of holes and making good surface to match with existing complete all as specified and directed.

S&F 100 mm bore cast iron (spun) pipes soil, waste and vent pipes, in any length with or without ears, with cement joints fixed to walls wherever required complete all as specified & directed.

S&F 100mm bore CI bends (any radius), diminishing pieces fitted with oval access doors etc complete all as specified and directed.

S&F 100 mm bore cast iron sanitary connections - short connection pipe of length up to 300 mm with cement joints complete all as specified and directed.

S&F 100 mm bore cast iron cowls complete all as specified and directed.

S&F 75 mm bore cast iron (spun) pipes soil, waste and vent pipes in any length with or without ears, with cement joints fixed to walls complete all as specified and directed.

S&F 75 mm bore cast iron bends (any radius) fitted with oval access doors etc complete all as specified and directed.

S&F 75 mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) complete all as specified and directed.

S&F 75 mm bore cast iron cowls complete all as specified and as directed.

S&F 100mm dia of out let cast iron nahani trap, with grating including joining to waste pipe fixed in cement concrete type B1 ( 1:2:4) complete as specified and directed.

S&F in repairs standard size, vitreous china, white wash down water closet pan (Pedestal pattern) (EWC) white/colour with seat cover including flush pipe, fixing bolts and connecting to drain and to flushing cistern complete all as specified and directed.

S&F in repairs vitreous china wash basin white, flat back of size (550 x 400 mm) of standard quality including brackets, cutting for and pinning in ends of brackets and connecting to supply and waste pipe fixed with existing complete all as specified and directed. Note :- supply only pillar tap, waste pipe & waste coupling will be measured and paid separately.

----ditto---- but fixing only in repairs

S&F in repairs chromium plated cast copper alloy shower rose 125mm size with swivel joint fixed to 15mm bore pipe complete all as specified and directed.

S&F in repairs bib taps suitable for 15mm bore dia of pipe, chromium plated, cast copper alloy with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and directed.

S&F in repairs stop valves, cast copper alloy, chromium plated, fancy type, screwed down, high pressure with crutch or butterfly handle screwed with suitable for 15mm bore GI pipe complete all as specified and directed.

S&F in repairs 25mm bore dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F 15mm bore brass chromium plated fancy type wall mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.

S&F 15mm bore brass chromium plated fancy type wash hand basin mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.

S&F in repairs 32mm bore waste coupling, brass, chromium plated for glazed ware basin with long screwed shanks and fly-nuts, flanged end bedded in red lead cement and other end fixed to discharge pipe (half or full threaded) complete all as specified and directed.

Supply only 32mm bore waste coupling, brass, chromium plated for glazed ware basin with long screwed shanks and fly-nuts, flanged end bedded in red lead cement and other end fixed to discharge pipe (half or full threaded) complete all as specified and directed.

S&F in repairs 40mm bore waste coupling, brass, chromium plated for kitchen sink with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed to discharge pipe (half or full threaded) complete all as specified and directed.

Supply only 40mm bore waste coupling, brass, chromium plated for kitchen sink with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed to discharge pipe (half or full threaded) complete all as specified and directed.

S&F in repairs sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm

----ditto---- but fixing only in repairs

S&F 15mm bore UPVC pipes of pressure rating 10 kgf/sqcm fixed complete to walls, ceiling or in floors, etc all as specified and directed.

----ditto---- but 25mm bore pipe

S&F in repairs 10 liter capacity PVC valve less syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

----ditto---- but fixing only in repairs

S&F in repairs PVC connections 15mm size of length 600mm high density polyethylene pipe with two brass unions complete all as specified and directed.

Taking up or down existing GI tubing and connections with all fittings fixed to wall / ceiling / laid in floor of size 15 mm bore complete all as specified and directed.

Taking up or down existing GI tubing and connections with all fittings fixed to wall / ceiling / laid in floor of size 25 mm bore complete all as specified and directed.

S&F rotational moulded high density poly-ethylene water storage tanks ( cylindrical vertical with closed top) of capacity 500 liter and conforming to IS, hoisted and fixed in position incl dismantling existing water tank or removing to store complete all as specified and directed.

,----ditto---- but 1000 Lit capacity

Disconnecting existing tanks n exc 500 lit capacity, setting aside ( or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and refixing in position complete all as specified and directed.

,----ditto---- but n exc 1000 Lit capacity

S&F in repairs ball valves suitable for 25 mm bore iron pipe high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball, screwed for iron pipe and fixed (minimum weight 455 gms) complete all as specified and directed.

-dotto- but fixed as in new water tank.

Hacking out old broken glass (any size, thickness, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.50sqm in each pane complete all as specified and directed.

S&F 3 mm thick figured glass, pin headed type and glazing with oil putty in square n.exc 0.50sqm in each pane complete all as specified and directed.

Taking down eaves gutter or rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks etc including cleaning for refixing or removal complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F in repairs brass chromium plated, tubular towel rail, 20mm dia; D type, 600mm long between flanges fixed to plug with chromium plated brass screws including wooden or plastic cleat complete all as specified and directed.

S&F in repairs grating square/round 100 mm dia of PTMT (minimum weight 25 grams) complete all as specified and directed.

Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15cm thickness (below or above ground level) of any description and in any position complete all as specified and directed.

M&L for 60mm thick precast concrete interlocking paving blocks factory casted using grey cement with pigment, machine pressed and of shape hexagon/ triangular/ zigzag/ I-shaped etc as directed of M-35 grade conforming to IS-15658-2006 laid over sand layer including filling the interstices complete all as specified and directed.

M&L for sand filling 25mm thick under floors below paver block including water and consolidation complete all as specified and directed.

M&L for 75mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base to flooring and finishing surfaces of concrete even & fair to receive the topping layer complete all as specified and directed.

M&L for cleaning / preparation of plastered surfaces of roof and applying evenly bitumen primer @ 0.25 kg per sqm complete all as specified and directed.

M&L for APP based polymeric membrane minimum weighing 3 kg/ sqm and minimum 3mm thick reinforced with polyester non woven fabric ( wt. not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified and directed.

M&L for cleaning / preparation of surfaces of roof membrane and applying evenly bitumen primer @ 1.2 kg per sqm over APP membrane complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-0 (using 20mm graded aggregates) as in roof padding over APP membrane finishing surface even and smooth without using extra cement complete all as specified and directed.

M&L for PCC 1:3:6 type C-1(using 20mm graded aggregates) as in copings and the like including weathering, slightly rounded or chambered on edge and throating complete all as specified and directed.

Demolition of brickwork , PCC solid block or stone/ boulder masonry, built in cement mortar or cement lime mortar complete all as specified and directed.

M&L for precast cement concrete block of PCC 1:3:6 Type C1 masonry with solid blocks , exc 10cm in width and setting in cement mortar 1:6 complete all as specified and directed.

S&F in repairs 4mm dia plain galvanised mild steel wire, class 3 in drying string including straining and fixing to steel posts and/ or to straining bolts, including securing with and provision of galvanised tying wire, galvanised iron staples or steel pins, etc. as directed ( each line of wire to be measured) complete all as specified and directed.

Taking down carefully existing copper/aluminium point wiring (light/fan/sockets) complete with all accessories such as switches sockets ceiling rose, wall bracket etc and removing dismantled material and making good disturbed surface of walls/floors etc matching with existing surface etc complete all as specified and directed by Engineer-in-Charge.

M&L point wiring for one light point /ceiling fan point controlled by one switch with 1.5 Sqmm (nominal area) PVC insulated, unsheathed multi strand copper conductor cable FR-LSH in and including concealed PVC conduit 20 mm dia, medium duty, ISI marked including new steel terminal sunken boxes suitable for modular switch/socket flush to surface (including modular frame and cover plate) for one light point, fan point , controlled by one switch on the same board with other switch or independent including PVC insulated unsheathed 1.5 Sqmm multi stranded copper conductor cable FR-LSH connected to common earth dolly complete including cutting, chasing the surface and then making good the same in CM (1:3) and finishing the surface to match with existing surface etc complete all as specified and directed by Engineer-in-charge. Note :- Switches, sockets etc shall be measured and paid for separately under appropriate items of Sch 'A'

All as per item No 113 (here-in-before) but for but one light point controlled by two switches two way.

All as per srl item No. 113 (here-in-before) but for one 3 pin socket out let 5 Amp on same board.

All as per srl item No. 113 (here-in-before) but for one 3 pin socket out let 5 Amp on independent board.

All as per srl item No. 113 (here-in-before) but for 15 Amp socket out let by using 2.5 Sqmm PVC insulated unsheathed copper conductor cable FR-LSH multi strand on independent board including provn of 1.5 Sqmm unsheathed, multi stranded copper conductor cable FR-LSH continues as earth wire connected to earth dolly etc complete all as specified and directed.

All as per srl item No. 113 (here-in-before) but for call bell point.

S& F modular type piano switch in replacement of unserviceable flush type piano switch, 6 Amp 240 Volt AC,1 module (ISI Marked) one way etc complete all as specified and directed.

S& F modular type piano switch in replacement of unserviceable flush type piano switch, 6 Amp 240 Volt, AC ,1 module (ISI Marked) two way etc complete all as specified and directed.

S&F modular type piano bell push in replacement of unserviceable flush type piano bell push, 5 Amp, 230 V, AC,1 module including cover plate etc complete all as specified and directed.

S&F modular socket,2 module, outlet 5 Pin 5 Amp 230 volts AC in replacement of unserviceable flush type 5 amp socket including decorative frame cover etc complete all as specified.

S&F modular switch 1 module in replacement of unserviceable 15 Amp switch flush type, outlet multipurpose 3 Pin 5 Amp and 6 Pin 15 Amp 230 volts AC including decorative frame cover etc complete all as specified.

S&F modular socket , 2 module in replacement of unserviceable 15 Amp socket flush type, outlet multipurpose 3 Pin 5 Amp and 6 Pin 15 Amp 230 volts AC including decorative frame cover etc complete all as specified.

S&F plug and socket in sheet metal enclosures with two pin and earth plug and socket complete with and including MCB SP 20 Amps 240 volts heavy duty etc complete all as specified and as directed.

S&F Lamp holder of PVC / Polycarbonate type surface for CFL / bulb etc including 9/10 W LED Bulb complete all as specified and directed.

Supply and Fixing LED batton fitting 1 x18/20 Watt, 6000K, 4" complete fitting connection with 2 core flexible cable 23/0.00076 from ceiling rose to tube fitting connection etc complete all as specified and directed.

S&F mini LED light fitting 9 W ,6000K indoor domestic mirror light luminarire with poly carbonate cover complete with all acessories and driver including connections with with twin core wire of suitable size all as specified.

S&F Decorative wall mounting fixture, in double plastic body &designer mesh in gold finish suitable for 14 W refrofit LED Lamp complete all as specified and directed. Cat Part No LHOECE1TZ1B014 OF Havells or equivalent in Bajaj/Philips/Crompton

S&F modular Ceiling fan regulator electronic step type, 2module in repalcement of unserviceable flush type fan regulator of suitable wattage, 230V suitable for 1200/1400 mm ceiling fan etc complete all as specified and directed.

S&F ceiling rose surface bakelite 65mm x 50mm, 2 to 3 terminals with back plate etc complete all as specified and directed.

S&F LED light fitting, 1X25 watt,5700 K complete with tuff net glass protection IP:66, fixed to walls with GI bracket made out of suitable size of light grade pipe 32 mm dia tubing upto 1.2 mtr length bent to shape with 02 sets of MS clamps made out of 25x3 mm MS flat iron with suitable bolt and nuts and testing etc complete all as specified and directed.

S&F Sub main wiring with two single core cable PVC insulated unsheathed of copper multi strandard conductor FR-LSH cable of size 6 sqmm, 1100 votls grade drawing through and including concealed conduit 20 mm dia medium duty including acessories such as Tee, bend, Elbow etc, ISI marked with and including PVC insulated 4 sqmm unsheathed multistranded FR-LSH copper conductor cable for earth continuity and connected to common earth dolly including cutting chasing of wall, if required and making good disturbed surface in CM (1:3) and finishig the surface to match with existing surface, etc complete all as specified and directed by Engineer-in-charge including taking down old unserviceable wiring. (Note:- Two lengths of 6 Sqmm cable and one length of 4 Sqmm cable will be measured as one length)

S&F Sub main wiring with two single core cable PVC insulated unsheathed of copper multi strandard conductor FR-LSH cable of size 4 sqmm, 1100 votls grade drawing through and including concealed conduit 20 mm dia medium duty including acessories such as Tee, bend, Elbow etc, ISI marked with and including PVC insulated 4 sqmm unsheathed multistranded FR-LSH copper conductor cable for earth continuity and connected to common earth dolly including cutting chasing of wall, if required and making good disturbed surface in CM (1:3) and finishig the surface to match with existing surface, etc complete all as specified and directed by Engineer-in-charge including taking down old unserviceable wiring. (Note:- Two lengths of 4 Sqmm cable and one length of 2.5 Sqmm cable will be measured as one length).

Supply and fixing double door sheet metal enclosure made out of CRCA mild steel sheet concealed surface mounting TPN, 4 way, 230 Volt, with 200 Amp rated bus bar suitable for fixing MCBs, isolators etc including taking down old complete all as specified and directed.

Supply and fixing double door sheet metal enclosure made out of CRCA mild steel sheet concealed surface mounting SPN, 8 way, 230 Volt, with 200 Amp rated bus bar suitable for fixing MCBs, isolators etc including taking down old complete all as specified and directed.

Supply and fixing double door sheet metal enclosure made out of CRCA mild steel sheet concealed surface mounting SPN, 2 way, 230 Volt, with 200 Amp rated bus bar suitable for fixing MCBs, isolators etc including taking down old complete all as specified and directed. Make:-Havells/Anchor/Legrand/ABB

S&F MCB TPN 63 Amps C curves MCB repturing capacity 10 KA etc complete all as specified and directed.

S&F MCB SPN 40 amp C curves MCB repturing capacity 10 KA etc complete all as specified and directed.

S&F MCB SPN 32 amp C curves MCB repturing capacity 10 KA etc complete all as specified and directed.

S&F MCB 6 Amp to 32 Amp SP capacities 'C' series 10KA rupturing capacaity complete all as specified and directed.

Fixing only MCB TPN 63 Amp,10 kA complete all as specified and directed.

Fixing only MCB SPN 40 Amp,10 kA complete all as specified and directed.

Fixing only MCB SPN 32 Amp,10 kA complete all as specified and directed.

Fixing only MCB SP 32 Amp,10 kA complete all as specified and directed.

M & L in repairs for earthing with galvanized steel plate electrode 600 x 600 mm x 6 mm size directly burred in ground vertically earth pit not less than 2.25 meter deep below normal ground level with top edge of the earth plate not less than 1.5 m below normal ground level surrounded with coal dust and common salt filling in alternative layers of 15 cm thick each connected to and including GI earth wire 4 mm dia by means of GI nuts, bolts, check nuts & washers etc connecting to earthing test point, main switch board and including 15 mm dia GI pipe light grade for protection of earth lead from earth plate upto 5 mtr and 20 mm dia GI pipe medium grade connected with funnel having wire mess for watering purpose including necessary excavation and earth work, PCC (1:2:4) type B-1 (using stone aggregates) for earthing pit, 10mm thick cast iron cover with angle iron frame all as specified and shown in electrical plate No 3 of SSR Part-I and testing on completion.

S&F in repairs call bell ding dong type, AC, 230 V etc complete all as specicied and directed.

KRISHNA CONSTRUCTION COMPANY

Aggarwal brothers and company

LADDOS BUILDCON

M/S SOLANKI GENERAL SUPPLIERS

Habib Traders