Construction of Pathway along side of Motijheel at Motihari, Bihar.

Supply and installing of 12.5M high mast system with its accessories Mast shaft shall be in two sections, hot dip galvanized and suitable for wind velocity as per IS 875 part 3.It shall also include accessories foe high mast including head frame steel wire rope 6 mm (7/19 construction) double drum winch, Galvanized lantern carriage arrangement suitable for 8 luminaries symmetrically & its control gear boxex and lighting finial system. Luminaries wiring materials not included in the mast supply price. Light fixture 8 nos. 250W mount on high mast. complete with all respect and as per direction of Engineer Incharge. Pathway

MAYFAIR Lighting Pole Or Post And Hardware- Tubular Street Light Poles Rev 1, Length 7 Meter MF HD 230 7mtrs with Double Arm MF 82 & 90w Lights (V Coating on the tubular steel poles - Galvanised min. Mass of Zinc coating 360 Gms. sq. Mtr., Designation of Tubular steel poles as per table 2 of IS 2713/80 Part-2 with amdt No 1 - 410SP-5, rade of steel tube, as per IS:1161/1998 - YST 240, Type of steel poles - Swaged (SP) (Product ID 5116877- 31743627858)

Total Amount =

Add GST 18%

Total of Part B

T.S. FOR PROPOSED CONSTRUCTION OF BUS STAND,NARKATIYAGANJ,BIHAR

Civil works (Scheduled Items)

Boundary Wall

EARTH WORK

For Boundary Wall (Plinth Beam)

MASONRY WORK

Boundary Wall

Below Tie Beam

CEMENT CONCRETE WORK

REINFORCED CEMENT CONCRETE WORK

All work upto plinth level

Columns till plinth

plinth

Columns

1:1.5:3(1 Cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size)

For Plinth Beam of Boundary Wall

Foundations,footings, bases Columns

Reinforcement for R.C.C work including straighting,cutting bending,Placing in position and binding all complets.

Boundary Wall

On Column

FINISHING WORK

WOOD & ALUMINIUM WORK

35 mm thick

STONE WORK

Granite black

Area of slab upto 0.50 sqm

FLOORING WORK

20 to 25mm thick

Two or more coat on new surface.

WATER PROOFING WORK

For Boundary Wall

Total Length Of Boundary Wall

Septic Tank & Soak pit

Boring work

RWH Work

Campus development and Approached road Work

Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401.

Campus light

Lightning conducter

SUB-HEAD-I: CIRCUIT CUM POINT WIRING

PVC/ METAL BOXES

COVER PLATE

PVC INSULATED COPPER CONDUCTOR WIRES

Supplying and fixing 6 amps. To 32 amps ratings, SP MCB, "C" curve testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

SUB-HEAD - IV :- CONDUITING WIRING AND CABLING FOR TELEPHONE / TV NETWORK SYSTEM

Supplying and fixing of following sizes of medium class PVC conduit

Supply, fixing, connecting and testing of telephone/computer/TV modular sockets connectionetc as required.

Providing, fixing connecting and testing of solder less Television Junction Box of following capacity ties as required in suitable size of m.s. hinged lockable cover box duly painted etc. as required of Krone type.

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and fixing metal box for tele tag box

The Transformer shall be subjected to routine factory tests (as per IS:2026 and IS:1180) including testing from CTL of discom before charging of transformer & complete installaion must be certified from Electrical Inspectorate office as per Indian Electricity rule, (CTL testing charges and Electrical Inspection charges shall be reimbursed by the department to the contractor). All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

Subhead:- I - Sanitary Fixtures

Providing and fixing PTMT Bottle Trap for Wash basin and sink.testing and commissioning etc. as required.

Subhead:- II - Internal Drainage (Rainwater, Soil, Waste & Fittings)

Providing & fixing PTMT grating of approved quality and colour

Subhead:- III - Internal Water Supply

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps,including cutting and making good the walls etc.(in Terrace)

G.I. pipes 50 mm dia

Providing & fixing ball valve ( brass) of approved quality,High or low pressure, with plastic floats complete:-

50 mm dia pipes

Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required :

G.I. Union 50 mm nominal bore

Providing and fixing enclosed type water meter

80 mm dia nominal bore

MATERIAL

Extra Cost of Materials

Total Civil cost Amount =

Add GST 6%

Grand Total Amount of BOQ In Rs =

Civil works (Scheduled Items)

Boundary Wall

EARTH WORK

Filling available excavated earth (exclude rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth consolidating each oeposited layer by ramming and watering lead.Ali kinds of soil

Boundary Wall

Below Tie Beam

CEMENT CONCRETE WORK

REINFORCED CEMENT CONCRETE WORK

Columns, Beam, Slab

For Plinth Beam of Boundary Wall

1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20 mm nominal size)

Plinth Beam (Boundary Wall)

Column (Boundary Wall)

Reinforcement for R.C.C work including straighting,cutting bending,Placing in position and binding all complets.

12 mm cement plaster 1:3( 1 cement: 3 coarse sand) finished with a floating coat of near cement

Boundary Wall

On Column

WOOD & ALUMINIUM WORK

Granite black

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacture) of approved make in all colours, shades except begundy, bottle green,black of any size as approved by Engineer-in-chage in skirting, risers of steps and dados over 12mm thick bed of Cement Mortar 1:3 (1 Cement:3 Coarse sand ) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Along external wall where the apron is not provided using chemical imulsion @ 7.5 liters / sqm of the vertical surface of the substructure to a depth of 300 mm including excavation channel along the wall & rodding etc. complete:

PROPOSED CONSTRUCTION OF BUS STAND,NARKATIYAGANJ,BIHAR

Civil works (Scheduled Items)

Boundary Wall

EARTH WORK

For Boundary Wall (Plinth Beam)

MASONRY WORK

Boundary Wall

Below Tie Beam

CEMENT CONCRETE WORK

REINFORCED CEMENT CONCRETE WORK

Columns till plinth

plinth

Columns till plinth

plinth

Columns

Columns

For Plinth Beam of Boundary Wall

1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20 mm nominal size)

Plinth Beam (Boundary Wall)

Column (Boundary Wall)

Columns, Pillars, Piers, Abutments, Post and struts

Column (Boundary Wall)

Boundary Wall

On Column

Boring, providing and installing bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring, with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. all complete, including removal of excavated earth with all lifts and leads (Length of pile for payment shall be measured upto bottom of pile cap). 300 mm dia piles

For Boundary Wall

Total Length Of Boundary Wall

Septic Tank & Soak pit

Boring work

RWH Work

Campus development and Approached road Work

Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401.

Campus light

Lightning conducter

SUB-HEAD-I: CIRCUIT CUM POINT WIRING

PVC/ METAL BOXES

COVER PLATE

SUB-HEAD - IV :- CONDUITING WIRING AND CABLING FOR TELEPHONE / TV NETWORK SYSTEM

The Transformer shall be subjected to routine factory tests (as per IS:2026 and IS:1180) including testing from CTL of discom before charging of transformer & complete installaion must be certified from Electrical Inspectorate office as per Indian Electricity rule, (CTL testing charges and Electrical Inspection charges shall be reimbursed by the department to the contractor). All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

Subhead:- I - Sanitary Fixtures

Subhead:- III - Internal Water Supply

MATERIAL

i) Local Sand

(ii) Coarse Sand

(iii)Stone Chips

iv) Bricks

v) Cement

vi) Paver Block

vii) GSB

Extra Cost of Materials

a) Bricks

b)Cement

Total Amount