Carriage and Replacement of Defective 220KV Line Distance Protection Panel at 220KV Pantnagar Bay alongwith other associated works at 400KV S/S Bareilly under Electy. 400KV Substation Division, Bareilly

Amount

Following works are required to be carried out for carriage of DPP from 400KV S/S Muzaffarnagar to 400KV S/S, Bareilly and for its erection at 220KV Panthanagar Bay at 400KV S/S Bareilly required for Satisfactory Completion of the Work as per Technical Specifications & Direction of the Supervising Engineer :

Shifting of 220KV Line Distance Protection Panel from store to loading point and safely Loading of 01 No. Panel with the help of Hydra at 400KV S/S Muzaffarnagar along with other associated works with all cost of men, materials and T&P etc. Required for satisfactorily completion of the work.

Safe Carriage of 01 No. 220KV Line Distance Protection Panel on suitable capacity/size vehicle arranged by the contactor from 400KV S/S Muzaffarnagar to 400KV S/S Bareilly “Including Toll Charges” (Approx. Distance 250Km).

Un-Loading and proper stacking of 01 No 220KV Line Distance Protection Panel from vehicle to control room with the help of Hydra at 400KV S/S Bareilly along with other accessories works with all cost of men, materials and T&P etc. Required for satisfactory completion of the work.

Modification of foundation base Chequered Plate according to new 220KV Control and Line Distance Protection Panel matching with Existing C & R Panels in control room including cutting, bending and welding of Chequered Plate safely as per requirement along with other accessories works with all cost of men, materials and T&P etc. Required for satisfactory completion of the work.

Installation & Erection of New 220 KV Control Panel and Line Distance Protection Panel along with earthing and all other associated works to complete the job satisfactorily.

Laying of Following sizes Armoured Control Cables in Cable Trenches from Control & Relay Panels in Control Room to various Equipments, Junctions Boxes etc. in Switchyard as per Cable Schedule in 01 No. 220KV Feeder Bays including its Saddling with 25×3 mm size Aluminium Strips at suitable equal Distance along with Shifting of Cables in Drums from Storage Place at the Sub Station to Erection Site & Shifting Back the Balance Cables to Stores at the Sub Station :

(a) 2C x 2.5 mm2

(b) 4C x 2.5 mm2

(c) 7C x 2.5 mm2

(d) 10C x 2.5 mm2

(e) 14C x 2.5 mm2

Interconnection & Termination of various sizes above Laid Control Cables between 220KV Feeder Control & Relay Panel to various Equipments & Equipments to Equipments in 01 No. 220KV Feeder Bays including Extending D.C. Supply from DCDB and A.C. Supply from ACDB to C&R Panels and various Equipments including Making necessary Holes in Gland Plates, wherever Required along with Providing & Fixing of Appropriate sizes Cable Glands, Providing of Ferrules for each Core of the Cables, then Termination with Crimping type Copper Lugs along with Preparation of Inter-Connection Drawing and Commissioning of the Panel / Feeders in Co-ordination with T&C Wing including Providing of 2 Sets of Hard Copies of as Executed Inter-Connection Drawing.

Ashu air conditiong service

M/s S.S. Refregeration