DEVELOPMENT OF CHANDKHEDA LAKE & CREMATORIUM AT TP NO-76/B FP NO-367 CHANDKHEDA GAAM IN CHANDKHEDA WARD,CHANDHEDA,WEST ZONE,AHMEDABAD.

Excavation for foundation up to 1.5 mt depth in soft and loose soil including sorting out

1.1 and stacking of useful materials and disposing of the excavated stuff up to 50mt lead. A 115.92 Cu-mt 316.74 36,716.38 1,329.31 154,093.93 245.58 28,467.56 382.07

Loose ar soft soil.

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 04001A ,PG NO -46 - -

Excavation for foundation For depth 1.5mt to 3.0mt including sorting out and stacking of

1.2 useful materials and disposing of the excavated stuff up to 50mt lead. A Loose ar soft soil 128.52 Cu-mt 316.74 40,707.29 1,337.18 171,854.75 245.58 31,561.86 382.07

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 04002A ,PG NO -46 - - -

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful

1.2.1 materials and disposing off the excavated stuff upto 50 Meter lead.(C) Hard Murrum 253.58 Cu.mt 19,352.93

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 04001C ,PG NO -46

Conveyance charge of earth, lime, murrum, building rubbish, manual

1.2.2 garbage, sludge, excavated rock, fly ash, aggregate of any kind etc. complete.

upto 50 m to 0.5 Km 303.69 Cu.mt 500.00

Lead upt 1 Km 320.20 Cu.mt 100.00

Lead upto 1.5 Km 335.15 Cu.mt 150.00

Lead upto 2 Km 347.73 Cu.mt 150.00

Lead upto 2.5 Km 359.33 Cu.mt 150.00

Lead upto 3 Km 370.53 Cu.mt 100.00

Lead upto 3.5 Km 379.80 Cu.mt 50.00

Lead upto 4 Km 390.56 Cu.mt 50.00

Lead upto 4.5 Km 399.58 Cu.mt 50.00

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 030201A2,PG NO -06

Excavation for foundation for depth from 3.0m to 5.0 m including sorting out and stacking

2.0 of useful materials and disposing off the excavated stuff upto 50 Meter lead.(B) Dense or 141.11 Cu-mt 316.74 44,695.03 1,354.40 191,119.42 369.66 52,163.34 369.66

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 04003A,PG NO -47 - -

Extra for additional depth more than 5.0m for excavation for foundation including sorting

out and stacking of useful materials and disposing of the excavated stuff upto 50 m

lead.(C) Hard Murrum

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 04003C+04004C, PG NO -47

Boring holes 3.5 m deep in ordinary soil (for cast in situ piles) and getting out the soil and

disposal of the surplus excavated soil as directed within a lead of 50 Meter for following

diameter of pipes.(iii) 300 mm

3.1 Boring holes 3.5 m deep in ordinary soil (for cast in situ piles) and getting out the soil and 1,509.00 RMT 250.00 377,250.00 - - - 357.00 538,713.00 2,296.00

disposal of the surplus excavated soil as directed within a lead of 50 Meter for following

diameter of pipes.(iii) 300 mm

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO 4.27– 04010C PG NO -49 - -

Extra for under reaming inside the bore Holes for under reamed piles of following

Diameter.(iii) 300 mm

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO 4.28– 04011C PG NO -49 - -

Add to or deduct from the rate for Bore Holes of 3.5 m Depth, if bore holes are made

deeper or shallower than 3.5M. for Piles of following diameter.(iii) 300 mm

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO 4.29– 04012C PG NO -49 - -

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations

4.00 etc. in layers not exceeding 20cm in depth consolidating each deposited layer by 129.10 Cu-mt 413.59 53,394.80 819.21 105,759.66 190.46 24,588.25 280.30

ramming & watering.

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 4006/4.12,PG NO -48 - - -

Filling foundation and plinth with murmur or selected soil in layers of 20 cm. thickness

including watering, ramming and consolidation etc. complete..

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 04008A ,PG NO -48 - - -

Filling in plinth with sand under floors including watering, ramming, consolidating and

dressing etc. completed to 10 ton

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 04007A,PG NO -48 - - -

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone

7.0 aggregate 40 mm nominal size derived from natural sources) - For Foundation PCC 2,653.67 Cu-mt 15.94 42,292.87 72.90 193,452.54 8.40 22,290.83 7.20 19,106.42 57.75

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 05004A ,PG NO -52 - - -

Providing and laying cement concrete1:3:6 (1-Cement:3-coarses and:6-hand broken

7.1 stone aggregates 40mm nominal size) and curing complete excluding cost of formwork in 2,976.00 Cu-mt 0.00 - 50.00 148,800.00 10.00 29,760.00 10.00

(A) Foundation and Plinth

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 05003A ,PG NO -52 - - -

Providing and laying in position ready mixed or site batched design mix cement concrete

M250 for reinforced cement concrete work; using coarse aggregate and fine aggregate

8.00 derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag - - -

Providing and laying controlled cement concrete M.25 and curing complete excluding the

8.1 cost of formwork and reinforcement for reinforced concrete work in (A) Foundations, 4238.04 Cu-mt 45.69 193,622.27 314.16 1,331,429.00 59.39 251,688.85 52.49

footings, Base of columns and Mass concrete.

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO 5.8.3 – 05025AA ,PG NO -57 - - -

Providing and laying controlled cement concrete M.25 and curing complete excluding the

8.2.1 cost of formwork and reinforcement for reinforced concrete work in (B) Walls, from top of 4519.88 Cu-mt 0.00 - - - - -

foundation level upto floor two level

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO 5.8.3 – 05025BA ,PG NO -57 - - -

(C) Slabs,landing,shelves,Balconies, Lintels, Beams, Girders and Cantilever upto floor

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO 5.8.3 – 05025CA ,PG NO -57 - - -

Providing and casting in situ C.C. in grade M-15 (approx. corresp.

to prop. 1:2:4) (proportions as per mix design or as per Table 9 of 18456 2000 in masses

by weigh batching ) using granite, quartzite trap metal of size 6 mm to 20 mm for PCC

8.2.3 work, including scaffolding cente ring, form work, needle vibrated consolidation, curing 4,906.00 Cu-mt 150.00 735,900.00 1,148.00

comp. up to 6 meter depth or height (excluding cost of reinforcement and neat finishing)

with centering and shuttering/deshuttering etc. comp. for structure for other than water

Tender Notice No-2024-2025 Tender No- 03 page No-5

Providing and laying controlled cement concrete M-25 for R.C.C. bored piles of 0.300 Mt.

diameter rincluding ramming, vibrating and finishing complete

Tender Notice No-2024-2025 Tender No- 03 page No-5

Providing formwork of ordinary timber planking so as to give a rough finish including

centering shuttering strutting and propping etc. Height of propping and centering below

8.3 supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ 171.68 Sq.mt. 150.71 25,873.03 578.50 99,317.22 64.72 11,111.47 55.48

reinforced concrete and plain concrete work in. (A) Foundations Footings Bases of

Columns etc. and Mass concrete.

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 09001AA ,PG NO -78 - - -

(B) Providing formwork of ordinary timber planking so as to give a rough finish including

centering shuttering strutting and propping etc. height of propping and centering below

supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ

8.4 reinforced concrete and plain concrete work in. (C) Vertical surface such as walls 229.95 Sq.mt. 0.00 - - - - 852.90 196,124.36

(any thickness) partitions and the like including attached buttresses & string course & the

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO 9.1 – 09001CA ,PG NO -78 - - -

(G) Columns PillarsPosts and struts. (1) Square Rectangular Polygonal in plan.

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 09001G1A ,PG NO -79 - - -

(H) (1) Sides and soffits of Beams Beam Haunchings cantilevers Girders Bressumers

and Lintels not exceeding 1 M. in Depth.

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 09001H1A ,PG NO -79 - - -

Providing formwork of ordinary timber planking so as to give a rough finish including

centering shuttering strutting and propping etc. Height of propping and centering below

supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ

8.7 reinforced concrete and plain concrete work in. (B) Flat surfaces such as soffits of 252.00 Sq.mt. 98.33 24,778.61 771.00 194,292.00 86.55 21,810.70 20.13

supspened floors slabs Landings and the like. (1) Floors etc. upto 200 mm in thickness.

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 09001B1A ,PG NO -78 - - -

(M) Staircase with sloping or stepped soffits including risers and stringers

excluding landing.(M) Staircase with sloping or stepped soffits including risers and

excluding landing.(M) Staircase with sloping or stepped soffits including risers and

excluding landing.

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 09001MA ,PG NO -80 - - -

Carring out plinth treatment to post construction / existing structure by spraying chemical

solution for termite control treatment including labour and material consistment with

I.S.Ispecification.Using Chlordeneand Chiorpurfiles 20EC.As Per6131_paret-

9.00 IIConsentration Weight one percent is recommendedi.eone litre 20ECchemical emulsion 104.90 Sq-Mt 128.78 13,508.95 916.59 96,149.89 50.00 5,245.00 153.79

with 19liter give1%concrentration inclusive of one litre chemical emulsion appication atthe

rate of 5Litre chemical/Sqm of surface is recommended as per I.S

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 22007 ,PG NO -157 - - -

(i)Uncoursed Rubble Masonry with hard stone of approved quality in foundations and

plinth in Cement Mortar1:6 (1-cement:6-coarse sand including levelling up etc. complete

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 07001AA ,PG NO -76 - - -

Brick work using common burnt clay building bricks having crushing strength not less

than 35kg./Sq.Cm.in foundation and plinth in Cement Mortar 1:6.(1-Cement: 6 -fine sand)

(B) Conventional

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 06002BA ,PG NO -70 - - -

Brick work using common burnt clay building bricks having crushing strength not less

than 35kg./Sq.Cm.in foundation and plinth in Cement Mortar 1:5.(1-Cement: 5 -fine sand)

12.00 (B) Conventional + Extra for brick work insuperstructure above plinth level upto floor two 4,283.91 Cu-mt 56.28 241,112.59 118.38 507,133.06 44.13 189,055.29 38.32 164,170.57 139.50 597,605.45 234.60

level (B) Conventional

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 06001BA+6006B ,PG NO -70,71

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 in superstructure above plinth level up to floor V level. 6.13.2 Cement

13.00 mortar 1:4 (1 cement :4 coarse sand) + Extra for half brick masonry in superstructure 633.99 Sq-mt. 31.19 19,774.78 - - - - 50.00

above plinth level upto floor two level. (B) Conventional

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 06008A2A + 06008E2A, PG NO -

Masonary work using Aerated light weightc oncrete block having crushing strength not

less than 35kg/sqcm for super structure above plinth level upto floor two level in cement

14.00 mortar 1:5(1cement:5finesand) complete as per Technical Specification 4,483.73 Cu-mt 5.00 22,418.65 5.00 22,418.65 5.00 22,418.65 5.00 22,418.65 20.00

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 6014 ,PG NO -74 - - -

Providing 20mm thick cement plaster in single coat on single or half brick walls for interior

15.00 plastering up to floor two level and finished even and smooth in (ii) Cement mortar 1:4 (1- 190.58 SQ.M 368.66 70,258.84 658.27 125,452.68 162.29 30,928.66 112.32

cement :4-sand)

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 17003B ,PG NO -129 - - -

Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior

16.00 plastering upto floor two level and finished even and smooth in (i) Cement mortar 1:3 (1- 127.58 SQ.M 114.32 14,585.25 924.49 117,946.94 92.37 11,784.56 153.84

10 mm cement plaster ( Internal ceiling plaster ) - - -

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 17001A ,PG NO -129 - - -

20 mm thick send face cement plaster on wall up to height 10meters above ground level

finishing coat of c.m 1:1 ( 1 cement :1 sand etc. Complete.

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 17009 ,PG NO -130 - - -

Providing and fixing window having extruded aluminum Colour anodized section frame

main outer size 95mmx24mmx1.17mm@ wt.of0.738Kg/mt,horizontal Three track

member size 92mmx31.75mmx1.30mm,@ Wt.1.07Kg/mt,vertica lmember of size

92mmx31.75mmx1.50mm @Wt.1.06Kg/mt with sliding shutters of horizontal member

18.00 size 40mmx18mmx1.29mm @wt.of0.456Kg/mt,vertical member of size 1,568.27 Sq-mt. 5.00 7,841.35 5.00 7,841.35 - - - -

40mmx18mmx1.29mm @wt.of0.456Kg/mt/ with 5mm thick transparent bronze colour

tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon

sealant glass fixing to frame as per detail

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 11027 ,PG NO -108 - - -

Providing and fixing window having extruded aluminum Colour anodized section frame

main outer size 63.50x38.10x1.95mm,@Wt1.094Kg/Rmt,horizontal two track member

size [email protected] 0.695Kg/mt,vertical member of size

61.85mmx31.75mmx1.30mm@ wt. of 0.659Kg/mt with sliding shutters of horizontal

19.00 member size 40mmx18mmx1.29mm @wt. of 0.456Kg/mt,vertical member of size 1,696.73 Sq-mt. 10.01 16,980.87 3.60 6,108.23 5.44 9,223.42 -

40mmx18mmx1.29mm @ wt.of 0.456Kg/mt,@Wt.0.457Kg/mt with 5mm thick

transparent bronze colour tinted float glass with powder coated aluminum fitting sand

fixtures and transparent silicon sealant glass fixing to frame as per details etc complete

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 11028 ,PG NO -108 - - -

Providing and fixing standared extruded of alluminium section of size

20.00 63mmx38.10mmx1.2mm @Wt.0.643 Kg/mt with colour anodized alluminium frame for 1,163.92 Sq-mt 1.49 1,728.42 1.49 1,728.42 1.49 1,728.42 -

ventilation with 5mm thick frosted glass as details etc complete for Ventilation

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 11030 ,PG NO -108 - - -

Providing wood work in frames of Doors, windows cleare story windows and other similar

works wrought, framed and fixed in position. (A) Indian Teak Wood

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 10001A ,PG NO -83 - - -

Providing and fixing 35 mm thick shutters for Doors, windows and clerestory windows

including Indian teak wood frames 10 cm x 7 cm. size including anodized alluminium

22.00 fixtures and fastenings including primer coat of approved quality and two coats of oil 5,285.45 sq.mt 5.73 30,301.48 3.82 20,200.99 2.18 11,543.42 -

painting etc, complete. (ii) Fully Panelled.

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 10030B ,PG NO -87 - - -

Providing and fixing FRP frame size 125x65 mm and 35mm thick FRP shutter having

extra reinforcement on sides & edges in polish finish. The core of the shutter & frame is

to be filed up with injected polyurethene foam done in situ alongwith embedded wooden

23.00 pieces for stiffening & also taking hinges & fintures. The whole FRP frame & shutter is to 1,999.98 Sq-mt 21.82 43,637.56 - - -

be water proof weather proof, termite proof & resistance to mild acid/alkali. Rates are to

be inclusive of S.S hinges with necessary screws & alluminium S.S fixtures & fastenings

& fastener sleeve.

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 10036 ,PG NO -90 - - -

Providing and laying Ceramic tiles 6mm thick in flooring treads of steps and landing laid

24.00 on a bed of 12mm thick cement mortar 1:3 (1-cement : 3- coarse sand ) finishing with 960.47 Sq-mt 49.66 47,698.86 - - -

flush pointing in white cement.

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO–14.29(B) 14008BA ,PG NO -120 - - -

Providing and laying Kota stone slab flooring over 20 mm (average) thick base of cement

mortar 1 : 6 (1 cement : 6 course sand) or L.M. 1 : 1.5 laid over and jointed with Grey

25.00 cement slurry mixed with pigment to match the shade of slab including rubbing and 982.83 Sq-mt 10.00 9,828.30 713.68 701,421.20 99.92 98,204.77 162.34

polishing etc. complete (A) 25 mm thick.

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 14012AA ,PG NO – 121 - - -

Providing and laying one sided polished granite slab of thickness (15 to 18mm) for door

and windows jambs with approved shade and size,colour,texture laid over 15mm thick

base cement mortar 1:3 (1Cement :3 fiine sand) joint treated with cement mixed with

26.00 matching pigment inlcuding rubbing,curing, moulding and polish to edge to give high 3,006.60 Sq-mt 49.66 149,313.77 12.00 36,079.20 - 210.00

gloss finish etc complete at all levels. As per technical specification of the tender,etc

complete, as per drawings and design supplied by architect and instructions given by

authority and EIC.

Rate ANALISYS-1 - - -

Providing and laying marble stone slab flooring over 20mm (average) base of cement

mortar 1:6(1-cement : 6coarse sand) or L.M.1:1.5 (1-lime putty:1.5-coarse sand)laid and

27.00 jointed with gray cement slurry including rubbing and polishing complete.(A)Marble 2,194.63 Sq-mt 0.00 - - - 50.00

slab25mm thick Sqm

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 14011A ,PG NO -121 - - -

Providing and laying Vitrified tiles 8 to10mm thick, 24''x24'' in skrting risers of steps and

dedo on10mm thick cement plaster 1:3(1-cement:3-coarsesand)and jointed with white

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 14009CA-C1 ,PG NO -121 - - -

Providing and laying coloured glazed tiles of the size 300 mm x 200 mm x 8 mm /

29.00 mm x 450 mm x 8 mm in skirting, risers of steps and dido on 10 mm. thick cement 1,426.95 Sq-mt 159.25 227,240.36 - - -

plaster 1:3 (1 cement :3 coarse sand) & jointed with white cement slurry.

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 14036 ,PG NO -124 - - -

Steel Work welded, in build up sections, framed work including cutting, hoisting fixing in

position and applying a priming coat of red lead paint (A) In beams and joints channels,

30.00 angles tees , flats with connecting plates of angle cleats as main and cross beams. Hip 8,330.18 Quint 15.00 124,952.70 15.00 124,952.70 5.00 41,650.90 75.00 624,763.50 75.00

and jack rafters, purlins conneted to common rafters and the like

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 11002AA ,PG NO -105 - - -

Providing and fixing M.S. Grills of required pattern to wooden frames of window etc. with

31.00 m.s plate at required spacing and frame around square or round bars with round headed 100.17 Kg 219.02 21,939.63 714.74 71,595.91 395.28 39,595.20 - 1,000.00

bolts and nuts of by screws (A) Plain grill

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 10025AA ,PG NO -87 - - -

Providing TMT Bar FE 500D reinforcement for R.C.C. Work including bending, binding

and placing in position complete upto floor two level

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 05014C ,PG NO -54 - - -

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture

on undecorated wall surfaces to give an even shade including thoroughly brushing the

surface free from mortar droppings and other foreign matter and sand papered smooth

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 18031 ,PG NO -135 - - -

Ceiling Paint (two coats) with plastic emulsion paint of approved brand and manufacture

on wall surfaces to give an even shade including thoroughly brushing the surface free

from mortar droppings and other foreign matter and sand papered smooth.

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 18031+18033 ,PG NO -135 - - -

Extra over item 37 for every subsequent coat of wall painting with plastic emulsion paint

of approved brand

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 18032 ,PG NO -135 - - -

Applying priming coat over new steel and other metel surface after and including

preparing the surface by throughly cleaning, oil, grease, dirt and other foreign matter and

scoured with brushes fine steel wood, scrapers and sand paper with ready mixed priming

paint brushing red lead.

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 19001 ,PG NO -136 - - -

Painting two coats(excluding priming coat)on new steel and other metal surface with

37.0 enamel paint,brushing,interior to give an even shade including cleaning the surface an 86.94 Sq-mt 58.00 5,042.52 58.00 5,042.52 58.00 5,042.52 - - 500.00 43,470.00 500.00

even shade including clean icn the surface of all dirt, dust and other foreign matter.

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 19002 ,PG NO -136 - - -

Finishing wall with weather proof (Apex ultimo of Asian, Jo-tun or equivalent) exterior

emulsion paint on wall surface (two Coats) to give of an required shade after thoroughly

brushing the surface to remove all dirt, and remains of loose powdered mate

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 19031 ,PG NO -139 - - -

Applying two coats of putty & two coats of primer of approved brand and manufacture on

39.00 new wall surface to give an even shade including thoroughly brushing the surface free 40.19 Sq-mt 460.82 18,520.46 822.83 33,069.73 202.86 8,152.89 140.40

from mortar dropping and other foreign matter and sand papered smooth.

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 19032 ,PG NO -139 - - -

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels,

plates etc., including welding, grinding, buffing, polishing and making curvature (wherever

required) and fitting the same with necessary stainless steel nuts and bolts.As per

technical specification of the tender,etc complete, as per drawings and design supplied

by architect and instructions given by authority and EIC.

Rate Analysis – 2 - - -

Providing and fixing in position collapsible steel shutters with vertical channels 20 x 10 x

mm braced with flat iron diagonals 20 x 5 mm size with top and bottom rails of T_tin 40x Quintal

41.00 40 x 6 mm with 38mm dia, steel pulleys complete with bolts, nuts, lock locking 5,391.23 3.50 18,869.31 - 3.50 18,869.31 - -

arrangements, stoppers, handles including applying a priming coat of red lead paint.

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 11003A ,PG NO -105 - - -

Providing and fixing 1mm thick M.S. sheet sliding shutters with frame and diagonal

braces of 40 x 40 x 6 mm angle iron, 3.15 mm M.S. gusset plates at Junctions and

42.00 corners 25 mm dia. pulley, 40 x 40 x 6mm angle and T-iron guide rail at top and bottom 3,652.12 Sq-Mt 0.00 - - - - 21.00

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 11004A ,PG NO -105 - - -

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE

having National Sanitation Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making good the wall, ceiling and floor

etc. complete.[A] 15 mm.

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 23055 ,PG NO -169 - - -

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE

having National Sanitation Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making good the wall, ceiling and floor

etc. complete.[B] 20 mm

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 23056 ,PG NO -169 - - -

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE

having National Sanitation Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making good the wall, ceiling and floor

etc. complete.[C] 25 mm

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 23057 ,PG NO -169 - - -

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE

having National Sanitation Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making good the wall, ceiling and floor

etc. complete.[D] 32 mm

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 23058 ,PG NO -169 - - -

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE

having National Sanitation Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making good the wall, ceiling and floor

etc. complete.[E] 40 mm

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 23059 ,PG NO -169 - - -

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE

having National Sanitation Foundation (NSF) seal for potable water of following dia.

48.00 nominal bore tube fittings and clamps including making good the wall, ceiling and floor 647.30 rmt 50.00 32,365.00 - - -

etc. complete.[E] 50 mm

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 23060 ,PG NO -169 - - -

Providing and fixing Gun metal check or non-return fullway wheel valve.(E) 40mm dia.

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 23031E ,PG NO -167 - - -

50.00 Providing and fixing Gun meta check or non-return full way wheel valve.(C) 25mm dia. 416.47 each 10.00 4,164.70 - - - 5.00

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 23031C ,PG NO -167 - - -

51.00 Providing and fixing Gun meta check or non-return full way wheel valve.(C) 32mm dia. 311.61 Each 5.00 1,558.05 - - - 5.00

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 23031D ,PG NO -167 - - -

Providing and fixing chromium plated brass half trun flush cock of approved quality

including fixing in pipe line etc. complete.(ii) 25mm dia.

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 23032B ,PG NO -168 - - -

Providing and fixing pillar tap, capstan head screw down high pressure with screws

shanks and back nuts.(20 mm dia)

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 23029B ,PG NO -167 - - -

Providing and fixing wash down water closet European type W.C. pan with integral “P” or

“S” trap including jointing the trap with soil pipe in cement mortar 1 : 1 (1 cement : 1 find

sand) (seat and cover to be measured and paid for separately) (A) Vitreous China

Pattern:(i) in white colour

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 23010 ,PG NO -165 - - -

Providing and fixing12.5 Litres low level flushing cistern with a pair,of C.I.or Mild

brackets,complete with fittings such as lead valve less syphon,15mm nom.nal size brass

ball valve with polythene float,C.P brass handle unions and couplings for connections,with

55.00 inlet,outlet and over flow pipes,40mm dia.porcelain enamelled flush bend including cutting 2,321.21 each 5.00 11,606.05 - - -

holes in walls and making good the same connecting the flush bend with cistern and

closet(over flow pipe to be measured and paid for separately)(A) Vitreous China (I) In

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 23013 ,PG NO -165 - - -

Providing and fixing plastic seat and cover for wash down water closer with C.P.brass

hinges and rubber buffers. (B) Black plastic seal and cover.

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 23017 ,PG NO -166 - - -

Providing and fixing in position with clamps etc.32mm nominal internal dia meter

57.0 galvanised steel tube flush pipe for high level flushing cistern including connecting the 338.46 RMT 50.00 16,923.00 - - -

flush pipe with cistern and closet and making good the walls and floors.

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 23015 ,PG NO -166 - - -

Providing and fixing water closet squatting Pan (Indian type W.C. Pan) size 580mm

58.00 (Earthwork, bed concrete, foot reste and trap Rate included ) (A) Vitreous China.(I) Long 926.10 each 1.00 926.10 - - -

pattern = White colour

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 23009 ,PG NO -165 - - -

Providing and fixing white Wash basin with single hole for pillar tap,with C.I. Or M.S.

bracket painted white including cutting holes and making good the same but excluding

fittings (A) vitreous china Flat back washbasin 550mm x 400mm size in white col

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 23018 ,PG NO -166 - - -

60.00 Providing and fixing C.P.brass waste for wash basin or sink. (A) 32mm dia. 67.24 each 6.00 403.44 - - -

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 23020A ,PG NO -166 - - -

61.00 Providing and fixing M.I. fisher union for wash basin or sink. (A) 32mm dia. 77.97 each 6.00 467.82 - - -

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 23021A ,PG NO -166 - - -

Providing and fixing Urinal of approved quality including conecting the Urinal with waste

62.00 pipe,tap etc.complete.(A) White earthenware flat back or corner type size 430mm x 1,026.01 each 5.00 5,130.05 - - -

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 23033 ,PG NO -168 - - -

Providing and fixing Urinal of approved quality including connection with trap and with

63.00 integral longitudinal flush pipe.(A) Squating plate pattern white earthenware 550mm x 1,535.63 Each 0.00 - - - -

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 23034 ,PG NO -168 - - -

GRANITE PARTITIONS FOR URINALS -Providing and fixing of double side

polished approved granite urinal partition of size 600mmx 900mm H formed out

of 19mm th approved shade granite fixed as per detailed drawing. Granite

partition to be ground on the edges As per technical specification of the

tender,etc complete, as per drawings and design supplied by architect and

instructions given by authority and EIC.

Rate Analysis – 3 - - -

Providing and fixing approved company made Providing and fixing toilet paper holder (A)

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 23027 ,PG NO -167 - - -

Providing and fixing chromium plated, bottle trap with necessary couplings of approved

quality for wash basin, Urinal

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 23036 ,PG NO -168 - - -

67.00 Providing and fixing brass screw down stop tap.(A) 15mm dia. 203.79 Each 8.00 1,630.32 - - -

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 23030A ,PG NO -167 - - -

Providing and fixing PVC SWR Nahni trap IS 14735 for

drain - 100 mm diameter with jali of the following nominal diameter of self

cleansing design with C.I scread down or hinged grating including the cost of

cutting and making good the walls.Providing and fixing PVC SWR Nahni trap IS

drain - 100 mm diameter with jali of the following nominal diameter of self

cleansing design with C.I scread down or hinged grating including the cost of

cutting and making good the walls.Providing and fixing PVC SWR Nahni trap IS

drain - 100 mm diameter with jali of the following nominal diameter of self

cleansing design with C.I scread down or hinged grating including the cost of

cutting and making good the walls.Providing and fixing PVC SWR Nahni trap IS

drain - 100 mm diameter with jali of the following nominal diameter of self

cleansing design with C.I scread down or hinged grating including the cost of

cutting and making good the walls.

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 23068 ,PG NO -171 - - -

69.00 Health Fauset Heavy duty with hook with fitting 576.27 Each 5.00 2,881.35 - - -

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – M739 ,PG NO -28 - - -

Providing and fixing bib cock two way XM-2109 with wall flange of 15mm dia.

Of Jaquare or ISI mark or its equivalent brand as directed etc. complete.

Market Rate - - -

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water

tight C.I. cover with frame of 300mm x 300mm size (inside) with standard weight (i)

71.00 Square mouth traps (A) 150mm x 100mm size P type (A) 150mm x 100mm size-P type 1,234.57 each 5.00 6,172.85 - - -

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 24006B ,PG NO -173 - - -

Providing and fixing 600mmx450mm beveled edge mirror of superior glass mounted on

72.00 6mm thick A.C. sheet or plywood sheet & fixing to wooden plugs with C.P. screws and 825.48 Each 6.00 4,952.88 - - -

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 23024 ,PG NO – 166 - - -

Providing & laying ( to level or slopes ) & jointing with stuff mixtures of cement mortar in

73.00 proportion 1:1 salt glazed stone ware pipes nominal internal diameter including testing of 288.23 Ra-mt 10.00 2,882.30 - - -

pipes and joints etc complete (B) 150mm dia

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 24001BA ,PG NO -172 - - -

Providing and fixing C.P. brass towel rail comlete with C.P.brass brackets fixed to

wooden plugs with C.P.brass scews.(B) 600mm x 20mm size.

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 23025 ,PG NO -166 - - -

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or

equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the

75.00 help of clamp at every two metre C/C or shall be concelled as directed including 146.65 rmt 8.00 1,173.20 - - -

necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 23064 ,PG NO -170 - - -

Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B)

conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring,

& fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line,

pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using

76.00 of PVC clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at every 826.88 rmt 30.00 24,806.40 45.00 37,209.60 18.00 14,883.84 30.00

2000 mm center to center or shall be concealed in walls as directed including necessary

fittings such as bends, shoes etc. including testing of pipes and joints and jointed with

adhesive solvent cement including cost of all materials

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 23067 ,PG NO -171 - - -

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends

with briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal dimensions total weight of cover with frame

to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top

77.00 slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size) 2,903.89 each 3.00 8,711.67 - - -

foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished

smooth with a floating coat of neat cement on walls and bed concrete etc. complete.(i)

Inside dimensions 455mmx 610mm and 450mm deep for single pipe line. (more than

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 24016AA ,PG NO -177 - - -

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends

with briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal dimensions total weight of cover with frame

to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top

78.00 slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size) 3,624.51 Each 2.00 7,249.02 - - -

foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished

smooth with a floating coat of neat cement on walls and bed concrete etc. complete.(ii)

Inside dimensions 500mm x 700 mm and 450mm deep for pipe line with one or two

inlets. (more than 10 ton)

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 24016BA ,PG NO -178 - - -

Extra over items 84 for every additional depth of 0.1M. of part thereof beyond 450mm

depth for Brick masonry chamber.(i) for 455mm x 610mm size.

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 24016AA + 24017A, PG NO –

Extra over items 85 for every additional depth of 0.1M. of part thereof beyond 450mm

depth for Brick masonry chamber.(ii) for 500mm x 700mm size.

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 24016BA + 24017B , PG NO -

Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M.

size having weight not less than 35Kg. Providing and fixing C.I. Manhole cover 0.60 M. x

size having weight not less than 35Kg.Providing and fixing C.I. Manhole cover 0.60 M. x

size having weight not less than 35Kg. Providing and fixing C.I. Manhole cover 0.60 M. x

size having weight not less than 35Kg.

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 23038 ,PG NO -168 - - -

Providing and fixing in position cowel Vent to pipes.(C)100mm dia Providing and fixing in

position cowel Vent to pipes.(C)100mm dia

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 23006C ,PG NO -164 - - -

Providing and fixing, CI steps in manhole, water tank, septic tank, etc., of size 500 mm. x

83.00 150 mm. x 22.5 mm. and painting with two coats of anti-corrosive paint, etc. complete. 162.23 Each 5.00 811.15 - - -

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 24010 ,PG NO -176 - - -

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse sand : 4-

graded stone aggregate 20mm nominal size) foundation concrete 1:3:6 mix (1-cement : 3-

coarse sand :6 Brick bats 40 + 50mm size) inside plastering 15mm thick with Cement

Mortar 1:5 (1-Cement : 5-coarse sand) finished with a floating coat of neat cement and

making channels in cement concrete 1:2:4 mix (1-Cement :2-Coarse sand :4- stone

aggregate 20mm nominal size) finished smooth complete including curing and festing (i)

84.00 Inside size 900mm x 1200mm and 1.5M. deep including C.I. cover with frame size 19,139.07 Each 2.00 38,278.14 - - -

560mm diameter total weight of cover and frame to be not less than 128 kgs. (Wt. of

cover 64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick walls of brick msonry using

brick having crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1-

Cement: 5-Coarse sand) (2) B type depth 1.50 Metre for 150mm diameter sewer.

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 24008B ,PG NO -175 - - -

SS Sink Glossy ASIS 304 Grade x 1mm thick with over all size 610x460 mm & bowl size

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – M729,PG NO -28 - - -

Constructing a cooking platform 60 cm. width and 70 cm high resting on B.B.Masonry

walls 23 cm.thick in C.M.(1:6) with (ii) Fixing black kadappa stone 30mm thick laid on

precast R.C.C. (1:2:4) slab with plastering on exposed faces of wall in C.M. (1:4) etc

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 22004B ,PG NO -156 - - -

Providing and erecting & fixing double coated Syntax PVC( ISI ) water of require capacity

each with all necessary fitting and connection etc. complete on terrace

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 22014 ,PG NO -158 - - -

Providing composite water proofing treatment to floor and walls of water tank, w.c. bath

area, through approved agencies preparing floor and wall for water proofing work/ by

chasing/ cutting as per the companies requirement. First by providing and applying

cementitious crystalline based waterproofing for concrete rafts, walls, water tanks, slabs,

concrete floors etc. with Epoxy coating. The application to be done from positive side on

a wet open pore concrete surface with brush @ to 1 kg/Sqmt as per mfg.'s specification.

After testing with ponding after 7 days, a layer of plaster with waterproofing compound/

88.00 admixture about 25 mm thick in the floor/ depression and about 18 mm on the side walls/ 1,963.00 Sq-mt 50.00 98,150.00 - - -

depression up to the floor level shall be provided over the surface treated with crystalline

powder. The waterproof plaster about 18 mm thick to be continued on the walls above the

floor level for a height of 900mm with surface suitable to receive further finishing

treatment all complete as per companies specifications and instructions and as directed

for all heights and floors. The round vata shall be included in this in sq. Mt and shall be

taken upto top of round on wall Providing & laying cement water proofing of average

mm thick for terrace slabs using cement mortar of 1:2:4As per architectural drawings

and design supplied by architect and instructions given by authority and EIC.

Rate Analysis – 4 - - -

Providing and laying broken chine mosaic flooring for terrace using 12 mm to 20 mm

broken pieces of glazed tiles to be laid over cement

89.00 mortar 1:3 to plain or slope and to be tempered to bring mortar creme out upto surface 739.89 Sq-mt 112.00 82,867.68 730.00 540,119.70 99.00 73,249.11 153.79

using white cement including rounding off junctions and extending them upto 15 cm along

the wall,clearing with water and oxalic acid etc. as directed.

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 14035 ,PG NO -124 - - -

Supplying and fixing reinforced concrete heavy duty non-pressure pipes with collars for

culverts including setting and joining the pipes in C.M.1:2 watering and laying (to level or

90.00 slope)ofI.S.class NP2 of following internal diameters.(i) 150mm dia. 246.21 RMT 5.00 1,231.05 - - -

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 24007BA ,PG NO -173 - - -

Clearing and grubbing road land including uprooting rank vegetation grass bushes,

91.00 shrubs, sapling and trees girth up to 300 mm removal of stumps of trees cut earlier and 105,932.93 Hectare 0.50 52,966.47 1.00 105,932.93 - -

disposal of unserviceable materials (B) By manual in area of thorny jungle

R & B SOR 2023-24, AHMEDABAD DISTRICT ,ITEM NO – 26117A ,PG NO -89 - - -

Providing and fixing chicken mesh jali at R.C.C. masonry joints at any height with all

labour & material etc. complete.As per technical specification of the tender,etc complete,

92.00 as per drawings and design supplied by architect and instructions given by authority and 571.50 Sq-mt 100.00 57,150.00 - - - 100.00

Rate Analysis – 6 - - -

Providing & fixing Commander make grab bar made up of aluminium alloy for divyang

toilet with EWC P pr S concealed (710 x 370 x 810), Cistren, Curse Special soft close

seat cover, internal fittings, washbasin 510 X 400m, Spatula lever faucet, 2 nos wall m

Rate Analysis – 7 - - -

Providing and fixing ABC type fire extinguishers (Mono-ammonium phosphate (MAP

94.00 90),finished externally with red enamel paint and fixed to wall with brackets, complete, 2,190.00 4.00 8,760.00 - - -

with internal charge of capacity :6 kg. each

Market Rate - - -

Providing and fixing carbon dioxide fire extinguishers, conforming to IS:2878, with all

95.00 accessories, finished externally with red enamel paint and with internal charge complete, 6,860.00 4.00 27,440.00 - - -

of capacity : -4.5 ltr, fixed on wall. each

Market Rate - - -

Earth work for embankment including breaking clods,dressing with all lead and

96.00 lift (excluding watering and consolidation) € From Borrow area within 3.0 Km. 159.62 Cu-mt 1,229.40

R & B SOR 2023-24, AHMEDABAD DISTRICT ,ITEM NO – 26001EA ,PG NO -36

Rolling of earth work in layers with power roller including filling in depressions

which occur during the process.

R & B SOR 2023-24, AHMEDABAD DISTRICT ,ITEM NO – 26002A ,PG NO -36 -

Watering of earth work as200 MM PER LAYER AS PER ENGG INCHRG

R & B SOR 2023-24, AHMEDABAD DISTRICT ,ITEM NO – 26003 ,PG NO -36

Demolition and disposal of unserviceable materials

with all lead and lift.(i) Lime concrete.

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO 20.1– 20001B ,PG NO -140

Dismentaling tiled of stone floors laid in mortar

including stacking of serviceable materilas and

disposal of unserviceable materials with all lead and

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO 20.23– 20005 ,PG NO -140

Dismentaling of sheet roofing including ridges,

Hips, Valleys, Gutters etc. stacking of serviceable

materilas and disposal of unserviceable materials

with all lead and lift.(i) G.I.sheet roofing.

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO 20.27– 20007A ,PG NO -140

Dismentling steel work including distempering and

102.00 stacking the materials with all lead and lift. 3.63 KG 15,000.00

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO 20.43– 20012 ,PG NO -141

Demolition of Brick work and stone masonry including stacking of serviceable materilas

103.00 and disposal of unserviceable materials with all lead and lift.(ii) In Cement Mortar. 544.95 Cu.mt 300.00

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO 20.11– 20003B ,PG NO -140

Supplying of crushed stone aggregates,chippings etc.of hard stone of following nominal

104.00 size free of disintegrated pieces deletarious and oraganicmater (forBitumen surface 454.58 Cu.mt 214.00

dressingetc.) and grading as per I.R.C. Code.(ii) 40mm

R & B SOR 2023-24, AHMEDABAD DISTRICT ,ITEM NO 20.43– 26012B ,PG NO -38

Spreading the stone aggregate for rolling and W.B.M. including filling the intersticesto

105.00 required camber and gradient (excluding spreading of Blindage)(iii)25mm to 50mm size 247.28 cu.mt 214.00

R & B SOR 2023-24, AHMEDABAD DISTRICT ,ITEM NO 20.43– 26018B ,PG NO -39

Clearing and grubbing road land including uprooting rank vegetation grass

bushes,shrubs,sapling and trees girth upto 300mm removal of stump sof trees cutear lier

and disposal of unserviceable materials © By mechanical meansinarea of light jungle

R & B SOR 2023-24, AHMEDABAD DISTRICT ,ITEM NO 20.43– 26117c ,PG NO -89

Watering earthwork up to OMC condition and compaction by sheep foot rollers and

dozers in layers not exceeding 22.5 cm to 95% dry density including hire and running

charges of all the machineries complete as per direction of EIC (Measurement to be

taken on the finished compacted section of the fill under OMC condition)

Tender Notice-2024-2025 Tender No- 3 Page No-8 -

Coursed rubble masonry with stone of approved quality in foundations and plinth in

Cement Mortar 1:4 (1-Cement : 4-coarse sand) etc. complete

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO 7.17C– 07005CA ,PG NO -76 -

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm

thick with grade of concrete M300 pnumatic compressed / vibrated mechanically and as

per approved design Confirming to IS 15658 : 2006 including 35 mm Sand

layer for levelling and filling the joint with sand in proper line and level as per guidlines of

IRC : SP 63- 2018 etc. Complete.

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 14033,PG NO -123 -

Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block

30cm length,30cm height and 15cm thick of M200 grade concret as per approved design

and including excavation for fixing in proper line and level,filling the joint with C:M 1:3

(1cement:3fine sand) etc complete.

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – 14023A,PG NO -123

To provide Tractor with Hydraulic Trolley, driver with fuel, to carryout different works

111.00 during day/night for 8 Hrs. Shift.Work shall be carried out as per the instructions of 1,661.02 SHIFT 3.00 4,983.06 10.00 16,610.20 30.00

Engineer In-Charge. No extra charged shall be paid for night shift.

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – H033,PG NO -43

112.00 Providing & Supplying JCB Machine / Hydrolic excevatorcapacity @ 60 cum per hour 711.86 Per hours 30.00 21,355.80 10.00 7,118.60 30.00

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – H016,PG NO -43

To provide Pavadi tractor with all tools, driver and Fule to Remove existing Soil on

113.00 Different roads.Work shall be carried out as per the instrucitons of Engineer In-Charge. 207.63 Per hours 30.00

No extra charged shall be paid for night shift.

R & B SOR 2023-24, AHMEDABAD CITY ,ITEM NO – H022,PG NO -43

114.00 Dewatering sludge water by pumping Pump with 20HP diesel engine 366.40 Hours 50.00

Tender Notice-2024-2025 Tender No- 3 Page No-8

115.00 Supplying and spreading good earth like firtile soil as directed etc compt. 508.00 Cum 3,870.30

Tender Notice-2024-2025 Tender No- 3 Page No-10

Landscape plantation work

Supply and planting of saplings of Hedge plants like kadvi mahendi, karmda,

116.00 dyuranta, nikodeviya and etc. specifies bag size is 4 inch x 6 inch, well established & 6.00 each 20.00

free from disease at site. as per the instructions

Tender Notice-2024-2025 Tender No- 3 Page No-10

Supply and planting of Champa Hybrid 25 inch x 25 inch, well branched, well

established & free from disease at site as per the instructions

Tender Notice-2024-2025 Tender No- 3 Page No-10

Supply and planting of Ficus panda, Ficus benjamina, Ficus benjamina

variegated, Ficus longisland bag size is 13 inch x

13 inch, well branched, well established & free from disease at site as per the

Tender Notice-2024-2025 Tender No- 3 Page No-10

Supply and planting of (Jasud, Ixora, Ticoma Gaudi-chaudi, Gultora, Jetropha,

Haemeliya, Chandani, Mogaro, Galfemia, , Allamenda, Desi Gulab, Euphorbia

mili, Jasud Hybrid, Chandani double, Madhukamini, Madhumalti, Ticoma Capensis,

119.00 Ixora draft, Nikadevia, English Karen etc.) having height of minimum 2.00 to 2.5 150.00 each 20.00

ft. and bag size is 13 inch x 13 inch, well branched, well established & free from

disease at site as per the

Tender Notice-2024-2025 Tender No- 3 Page No-10

Supply and planting of common Medicinal Plants like Ardusi, Aloe spp., having

height of minimum 2.00 to 2.5 ft. and bag size is 8 inch x 10 inch, well branched,

120.00 well established & free from disease at site as per the instructions. 60.00 each 20.00

Tender Notice-2024-2025 Tender No- 3 Page No-11

Supply and planting of Exotic and Endengered Medicinal Plants like Insulin plant,

zer kochalu having height of minimum 2.00 to 2.5 ft. and bag size is 13 inch x

121.00 13 inch, well branched, well established & free from disease at site as per the 250.00 each 25.00

Tender Notice-2024-2025 Tender No- 3 Page No-11

Supply and planting of Golden Bamboo having height of minimum 5 to 6 ft.

122.00 and bag size is 8 inch x 10 inch, well branched, well established & free from disease 45.00 each 25.00

at site as per the instructions.

Tender Notice-2024-2025 Tender No- 3 Page No-11

Supply and planting of Diff. Varieties of Palm(Botal palm,foxtel, ) having

height of minimum 10.00 to 12.00 ft. and bag size is 25 inch x 25 inch, well branched,

well established & free from disease at site as per the instructions

Tender Notice-2024-2025 Tender No- 3 Page No-11

Supply and planting of champa (deshi) having height of minimum 8 to 10 ft.

and bag size is 15 inch x 16 inch, well branched, well established & free

Tender Notice-2024-2025 Tender No- 3 Page No-11

Excavating pits of proper size and providing well grown seplings of big trees (Gulmohar,

peltoforum, kordia, kadam, Saptparni, Tebubiarosea, Borsalli,

Spethodia, Neem, Parijatak, vad, pipal, Umro, Garmalo, Khati Ambali, Jambu,

125.00 Badam etc.as directed) having Height of Minimum 8 fit to 9 fit bag size is 25 inch 3,500.00 each 25.00

x 25 inch and planting the same with varmi campost at the rate of 0.06 cu.m.per pit

Tender Notice-2024-2025 Tender No- 3 Page No-11

MIYAWANKI PLANTATION

Supplying and planting fresh and healthy plants (Syzygium cumini

, Terminalia catappa, Polyalthia longifolia, Phyllanthus emblica, Peltophorum

pterocarpum, Azadirachta indica, Bambusa vulgaris, Neolamarckia cadamba,

Lagerstroemia indica, Cassia fistula, Cassia siamea, Mangifera indica, Acacia

auricutiforms, Casuarina equisetifolia, Annona squamosa, Ficus religiosa,

Ailanthus excelsa, Cordia sebestena, Alstonia scholaris, Manilkara

hexandra, Moringa oleifera, Pongamia pinnata,Terminalia arjuna, Butea

monosperma, Saraca asoca, Morus nigra, Ceiba pentandra, Sterculia fotida,

Terminalia bellirica ets.) of 2-3 ft. Height in 6 inch x 6 inch polythene bag size with

all material including

transporting and labouring and all othe inclusive.

Tender Notice-2024-2025 Tender No- 3 Page No-11

LAYING OUT LAWN - After

excavating soil upto 30 cm. depth & removing unwanted stuff, stones etc.

Preparing soil for planting by supplying, mixing and 0.5 cmt FYM maximum

sqmt of lawn area and doing termicide @ 1 lit / 100 sqmt area and planting

selection 1 type / English lawn / approved lawn grass at maximum 6 cm x 6 cm

distance and maintain it upto 120 days. Maintainance include all operations i.e.

watering, grass cutting, gap filling, applying of

fertizer if require etc.

Tender Notice-2024-2025 Tender No- 3 Page No-12

128.00 Sprinkler Irrigation System 57.00 smt 4,924.75

Tender Notice-2024-2025 Tender No- 3 Page No-12

Unconventional WTP GWSSB SOR- SECTION 1 - D 1.00

GWSSB SOR page No-

Providing, Fabricating & fixing WDS name board of Size 3.00mX0.60 made

from ISA 50X50X5 mm M.S angle with 3 Nos supports at back side vertical member of

angle size 1.1m ht incl 0.3 m hold fast inserted in compound wall with necessary

132.00 dismantling and fixing with cement concrete. The rate shall also incl 16 g M.S 15,640.00 EACH 1.00 15,640.00 1.00

sheet of size 3.00X0.60 mt incl ACP Sheet with Printing letter with AMC logo as

directed by EIC. rate shall incl painting board with 2 coat of enamal paint over one coat

of anti-corrosive primer.

Tender Notice-2024-2025 Tender No- 3 Page No-27

Providing, Fabricating & fixing caution board of size 1.50m x 0.60m made from ISA

5 mm MS angle with 2 nos. supports at back side vertical member of of

angle size 1.10m height (inclu. 0.30m hold fast inserted in compound wall with

133.00 necessary dis-mantling and fixing with cement concrete. The rate shall also include 7,900.00 EACH 1.00 7,900.00 1.00

14g MS sheet of size 1.50mt x 0.60mt incl ACP Sheet with Printing letter with logo as

directed by EIC. rate shall incl painting board with 2 coat of enamal paint over one coat

anti-corrosive primer.

Tender Notice-2024-2025 Tender No- 3 Page No-28

Providing and fixing Radium sign board of size 3.00mt x 0.60 mt made from ACP

sheet with writing coloured reflected letter of WDS name board with necessary

134.00 clamp for hanging board at pump house etc. comp as directed by EIC 7,400.00 EACH 1.00

Tender Notice-2024-2025 Tender No- 3 Page No-28

ESTIMATE FOR ELECTRICAL WORK CRIMITORIUM BOQ

Quantities estimated but Estimated

Item No. SOR / RA Item Description Unit Amount

may be more or less Rates

Section - 1-2 Point wiring in Copper

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade ZHFR/HRFR PVC insulated multi

strand copper wires up to 10 mtr length , in below type of pipe erected with 6A

Modular type switch / bell push & accessories and earth continuity of following

type, erected on PVC / Metallic/Wooden box, single mounting base frame

covered with textured/metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete

Point wiring for Tissino / Modular secondary light point with 2-1.5 sq.mm & earth

wire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade ZHFR/HRFR PVC

insulated multi strand copper wires, in below type of pipe to be erected complete

1-1-4. with earth continuity and necessary connection with primary light with accessories

erected on Metal / PVC / wooden box covered with 3 mm thick PC(Polycarbonate) /

Acrylic sheet for open / concealed wiring. with necessary Lamp holder / ceiling rose /

H.D.Connector as directed.

Note:- Maximum up to 6 mtrs length, excess will be considered as Mains for

Secondary Point.

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both

are of .ISI marked 1.1 KV Grade ZHFR/HRFR PVC insulated multi strand

copper wires up to 10 mtr length, in below type of pipe erected with 6A

Modular type switch and hum free EME step type electronic fan regulator

1-2-2. mounted and accessories with earth continuity of following type erected on

PVC / Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall / ceiling as per

pipe erected. with necessary ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both

are of ISI marked 1.1 KV grade ZHFR/HRFR PVC insulated multi strand

copper wires up to 10 mtr length, in below type of pipe erected complete with

1-2-3. Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box

covered with appropriate front plate modules erected on / in wall / ceiling as

per pipe erected with following type of accessories.

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby

switchboard/mcb db board

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat. III

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat. III

[III] For 16A Plug and 16 amp switch with 2-4 sq.mm Cu. Wire with 2.5 sq.mm

( green) earthing wire from mcb d b board.

(f) with medium class Rigid PVC pipe and accessories erected concealed in

III 6 906.15 Pt.

wall/ceiling complete Cat. III

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin

socket erected on PVC / Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate modules erected on / in wall

/ ceiling with following type accessories Cat. III

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire

of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade ZHFR/HRFR PVC

insulated multi strand copper wires erected in below type of pipe with 6A

Modular type switches and following type of accessories erected on PVC /

Metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate modules erected on / in wall / ceiling as per pipe

erected. with necessary batten/angle holder or ceiling rose or H.D.Connector

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat. III

Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate , modules erected with necessary connections as per

site situation directed by Engineer In charge.

(1)One No. SP 6 Amp.

10 Cat.III 157.50 each

(2) One No 5 pin plug

10 Cat.III 157.50 each

(5) Electronic hum Free four or more steps EME Fan regulator

48 Cat.III 414.75 each

(9) 16 Amp. SP one way switch

10 Cat.III 187.95 each

(10) 6/16Amp. Universal socket

10 Cat.III 207.90 each

Providing & erecting Switch board for Computer or electric apparatus consisting of

following modular type accessories mounted with PVC / Metallic concealed/open

box with single mounting base frame covered with textured/metallic /white front

plate,modules erected with necessary connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

For Modular Type Accessories

4 Cat.III 1,178.10 Ea.

B Section :- 1- 3 / Conduits & Pipes

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following

size complete to be erected on/in wall or ceiling erected with necessary PVC

fittings & Junction boxes fixed with adhesive solution & Clamps with following

dia of pipes, in approved manner as directed

Providing & erecting PVC Corrugated Flexible Conduit with required nos. of

coupling, PVC bushes, Check-nuts etc. complete of following sizes.

UPVC TRUNKING SYSTEM

Supplying and laying UPVC cable trunking system comprising unplasticised

polyvinyl, chloride rigid material with ignition free and flame proof confirming

1-3-6. BS with necessary end caps Internal and external bend, flat bends, coupler,

tee etc..All necessary accessories and measuring of following sizes

10 (1) 75 mm x 50 mm trunking 275.00 rmt

30 (2) 100 mm x 50 mm trunking 424.00 rmt

C Section 1-4 Mains & Wires

Providing and erecting Mains with 1.1 KV grade ZHFR/HRFR PVC insulated

ISI marked stranded Copper conductor wire in following type of pipe to be

1-4-1. erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor ZHFR/HRFR PVC insulated stranded wire of green colour for earth

continuity of following size

(A) With medium class Rigid PVC pipe and accessories

1800 (a) 2 wire 1.5 sq. mm 65.10 rmt

2500 (b) 2 wire 2.5 sq. mm 86.10 rmt

providing and erecting Mains with 1.1 KV grade ZHFR/HRFR PVC insulated

ISI marked stranded Copper conductor wire in following type of pipe to be

1-4-2. erected in / on wall / ceiling with 2.5 sq. mm copper conductor ZHFR/HRFR

PVC insulated stranded wire of green colour for earth continuity of following

(A) with medium class Rigid PVC pipe and accessories

980 (a) 2 wire 4 sq. mm 116.55 rmt

80 (g) 4 wire 4 sq. mm 187.95 rmt

180 (h) 4 wire 6 sq. mm 270.90 rmt

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing pipe of following size

(Specifically for control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and bolts if required.

100 (b) One wire 1.50 sq. mm 17.00 rmt

50 (e) One wire 6.00 sq. mm 56.00 rmt

50 (f) One wire 10.00 sq. mm 91.00 rmt

30 (h) One wire 25.00 sq. mm 234.00 rmt

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv

1-4-5. grade ISI marked copper wires of following size to be erected as directed.

100 (e) 1.50 Sq.mm 3 core round PVC sheathed 46.00 rmt

150 (h) 2.50 Sq.mm 3 core round PVC sheathed 77.00 rmt

E SECTION 3-1 SWITCHGEARS WITH REWIRABLE FUSES

Pproviding and erecting Approved make Four pole moulded case circuit

breaker having breaking capacity ICU of 25 KA. at 415 V,having normal

current rating up to 25 A to 100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with all internal connections, spreader

tinned copper & complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

Providing and erecting Approved make Four pole moulded case circuit breaker

having breaking capacity ICU of 35 KA. at 415 V. having normal current rating

125A. with Fixed thermal & magnetic release suitable to work on A.C.supply

50 c/s. with all internal connections, spreader tinned copper & complete

erected in existing 16 G.M.S. housing. ICS=100% of ICU only Cat III

Providing and erecting Approved make Earth fault Relay suitable to mount

with inter connection suitable to following size of moulded case circuit breaker

3-4-13. having CT ratio & MCCB rating as following along with shunt trip 220V AC.

with all internal connections & complete erected in existing M.S.housing..

F SECTION 3-6 CHANGEOVER SWITCHES.

Supplying & erecting approved make Four Pole 415V change over switch

3-6-8. 1 interior for panel mounting with operating mechanism A.C.23 duty confirming 7,713.00 each

to IS for (C)100-125A

G SECTION 3-8 / PANEL MOUNTING BUSBARS

Supplying and erecting triple pole & neutral 440V / 500V panel mounting

Copper Busbars with four equal Nos. of electrolyte bus having current density

not more than 1.6 Amp. / sq.mm (Rated current / cross section area) duly

3-8-2. wrapped with colour insulating tape for phase sequence of following current

carrying capacity, erected with necessary bus bar supports /insulators, main

cable socket to each bar, erected in existing cubical panel with necessary

3 (A) Suitable for 100 Amp. Capacity 1,942.00 rmt

8 (B) Suitable for 200 Amp. capacity 3,171.00 rmt

H SECTION 3-10 / MINIATURE CIRCUIT BREAKERS.

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable

to operate on 240 V A.C. system and having breaking capacity 10 KA to be

erected in existing box. confirming to IS 8828/1996 with ISI Mark Cat.III

Providing & erecting 240 V MCB double pole switch for motor & inductive load

(C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing

box having following capacity

3-10-2. 2 (A) 6 to 32 Amp. Cat.III 297.00 each

2 (B) 40 Amp. Cat.III 327.00 each

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C

3-10-5. Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box

having following capacity

2 (a) 6 to 32 Amp. Cat.III 590.00 each

12 (b)40 Amp. Cat.III 662.00 each

11 (c)63 Amp. Cat.III 730.00 each

Providing & erecting 415 V MCB three Pole for Motor & Inductive Load (C

3-10-6. Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box

having following capacity

2 (a) 6 to 32 Amp. Cat.III 582.00 each

2 (b)40 Amp. Cat.III 641.00 each

2 (c)63 Amp. Cat.III 709.00 each

I SECTION 3-11 / MCB DISTRIBUTION BOARDS

3-11-1. 20 Half / One Module Blanking Plate of Standard Size. 9.00 each

Plastic enclosure fitted with DIN rail suitable for incorporating Three /Four

Providing and erecting Sheet Steel powder coated MCB distribution board -

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail,

3-11-5. Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same company of MCB

to be used) suitable for

(A) single phase incoming and horizontal single phase outgoing

(b) sheet steel double door (IP-43)

1 (iii)8 way 1,141.00 each

2 (iv)12 way 1,478.00 each

(B) three phase incoming and single phase horizontal type outgoing Per

phase isolation type (PPI)

(b) sheet steel double door

2 (i)4 way 2,316.00 each

5 (ii)6 way 2,885.00 each

1 (iii)8 way 3,379.00 each

Providing and erecting Sheet Steel powder coated Vertical MCB distribution

board (VTPN) - flush / surface mounted double door (IP54) fitted with copper

insulated busbar, isolated neutral bar, earth bar and DIN rail, Conforms to IS

3-11-10. 8623-1 & 3, IEC 61439-1 & 3, suitable for 63/100 AMP TPN MCCB + RCCB

as incomer and three phase outgoing as per following .(The DBs should be

used of same company of MCB to be used)

1 (B)6 way outgoing 6,433.00 each

J SECTION 3-12 EARTH LEAKAGE CIRCUIT BREAKERS

Approved make ELCBs / RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit withstand capacity of 6 KA and suitable

for operation on single phase 240 V. having characteristic of quick action &

tripping with all advance feature &

2 (i) 25 Amps.DP Cat. III 1,950.00 each

16 (ii) 40Amps. DP Cat. III 2,213.00 each

10 (iii) 63 Amps. DP Cat. III 2,628.00 each

Approved make ELCBs / RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit withstand capacity of 6 KA and suitable

for operation on 3 phase and neutral 415V. having characteristic of quick

action & tripping with all advance feat (iii) 63 Amps. FP

K SECTION 3-13 / DANGER NOTICE BOARDS.

Providing and erecting metallic vitrified danger notice board for MEDIUM

VOLTAGE installation to be erected as per IS.

L SECTION 3-14 EARTHING

Providing and erecting required size HOT deep Galvanised iron strip for

3-14.2. 150 earthing of H.T. , OCB/ ACB/ Transformer LT panel board, Motors etc. using 77.00 kg

Providing and erecting required size Copper strip for earthing of H.T. OCB /

3-14-3. 20 ACB/ Transformer, LT panel board, Motors etc. using copper clamp. 787.00 kg

3-14-4. 20 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 787.00 kg

Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG.

Supplying & erecting earth pit of minimum bore dia.150mm size approved

make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of

50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-

250 Micron galvanising, connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with high charge dissipation

suitable for following type of applications with chamber and heavy duty

cover.(approved make OEM has to submit test certificate) & having back

filling compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 /

meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry

form, Sulphar content:- <2%(C) Back fill Compound :- Earthing compound

should be capable to retain moisture for long time Necessary test report must

(c) For Electrical Installation covering Transformer Neutrals, Lightning arrester

Earthing, A.C.Plant & Sensitive Computer System(like Automation, SCADA)

i.e independent Earthing in normal soil.

Length of Pipe : 3.00 mtrs Back filling Compound :2 nos Bags of 25 Kg.

Supplying & erecting in earthpit of minimum bore dia. 225mm size approved

make Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS

3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia

of 80 mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm having

200-250 Micron galvanising, connection terminal dia of 14 mm with constant

ohmic value surrounded by highly conductive compound with high charge

dissipation suitable for following type of applications with chamber and heavy

duty cover.(approved make OEM has to submit test certificate including value

of earth resistane of installation.

[C] For Electrical Installation covering Transformer Neutrals, Lightning

arrester Earthing, A.C.Plant & Sensitive Computer System(like

Automation, SCADA)i.e. independent Earthing located in other than

normal soil i.e. Soft Rock, Marshy Soil etc..

-Length of Pipe : 3 Mtrs.

-Back filling Compound :2 nos Bags of 25 Kg.

Providing one bag of 25 Kg. Additional Back Filling Compound (BFC) suitable

for safe earthing device.

Supplying & erecting funnel type earthing having earth plate of following size

burred in specifically prepared earth pit 3 mtr. below ground with 40 kg.

charcoal and salt with alternate layers of charcoal & salt, 20mm.dia. G.I. pipe

with Funnel with a wire mesh for watering & bricks masonry block, C.I. Cover

complete as per para 7.3 of IS 3043 with necessary length of double

Galvanised Iron / copper earth wire No 6 SWG bolted with lug to the plate and

covered in 12 mm dia. G.I. pipe 2.5 mtr long complete connected to the

nearest switch gear with end socket as per direction & duly tested by earth

tester confirming to IS (As per drawing) with following specification

2 (C) with 60 x 60x 0.315 cms. Copper earth Plate 7,797.00 each

M SECTION 3-16 / CUPBOARDS.

Providing & erecting weather proof, dust & vermin proof, floor mounted front

operated indoor type cubical panel board necessary IP-42 and above

protection as per approval from engineer incharge made from 14 SWG thick

CRC M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for

internal partitions with necessary accesories , supporting angles/ flats channel

including cutting, bending, drilling, welding, riveting with internal partitions &

cable alley as per requirements & instruction of engineer-in-charge with

supplied switch gears, BUSBARS, suitable size of inter connecting PVC

copper wire / copper-aluminium strips, rubber grommets, rib, bakelite control

fuses/MCB for measuring instruments, earth bus & earth bolts, foundation

flange - bolts-base Plates, sufficient nos. of hinged doors, handles with locking

arrangement and rubber gasket,heavy duty end terminal connection,danger

notice board,necessary ventilation,earthing strip complete. The Panel shall be

painted with epoxy powder coating.

(The rates excludes the cost of switchgears, bus bars, inter connecting mains

& Copper Aluminium strips, meters, Fuses etc. The dimension shall be

measured excluding base beams) The panel shall be supplied with following

approved manufacturers with following size.

(B) The standard companies switch gear shall be used and only manufacturers

at CPRI approved factory

6 (i) with 350mm depth 14,755.00 sqm

Providing , erecting , fabricating the M.S. structure as per requirement on site

incorporating proper size of M.S. angles,square,round, flats, bars, channels,

sections complete with cutting, welding, grinding & finishing duly painted with

3-16-4.A. 300 one coat of red oxide with erection on site as per direction of engineer in 77.00 kg

charge with necessary grouting, cementing, plastering & finishing complete.

N SECTION 4-3 / ARMOURED ALUMINIUM CABLES

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

4-3-3. Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or

in existing trench / pipe of following size of cables

300 (A) 3 1/2 core 25 Sq. mm ( 16 Sq. mm 1/2 core) 182.00 rmt

80 (B) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core) 218.00 rmt

80 (C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core) 282.00 rmt

125 (D) 3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 core) 375.00 rmt

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand /

4-3-4. Solid Aluminium conductor for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe of following size of cables

150 (B) 4 core 6 Sq. mm 125.00 rmt

150 (C) 4 core 10 Sq. mm 139.00 rmt

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand

4-3-5. Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or

in existing trench / pipe of following size of cables

250 (A) 4 core 16 Sq. mm 152.00 rmt

O SECTION 4-4 ARMOURED COPPER CABLES

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand /

Solid Copper conductor for 1.1 KV. to be laid on wall with necessary clamps

or in existing trench / pipe at road crossing or floor of following size of

150 (A) 4 core 2.5 Sq. mm 269.00 rmt

200 (B) 4 core 4 Sq. mm 361.00 rmt

Q SECTION 4-6 / CABLE GLANDS.

Providing and, fixing heavy duty flange type brass cable gland with rubber ring

4-6-1. for PVC insulated armoured cable complete with out going tails, insulating tape

etc for following size of cables.

30 (A) 2 to 4 core 2.5 / 4 Sq. mm 33.00 Ea.

4 (B) 2 to 4 core 6 Sq. mm 38.00 Ea.

20 (C) 2 to 4 core 10 Sq. mm 38.00 Ea.

12 (D) 2 to 4 core 16 Sq. mm 47.00 Ea.

Providing and, fixing heavy duty flange type brass double compression type

cable gland with rubber ring for PVC insulated armoured cable complete with

out going tails, insulating tape etc for following size of cables.

R SECTION 4-7 CABLE LUGS.

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of

following size evenly crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut bolts in an approved

Solderless crimping type Copper lugs conforming to IS suitable for cable of

following size evenly crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut bolts in an approved

350 (A) 1.5/2.5 to 6 Sq.mm 8.00 each

20 (B) 10 Sq.mm 10.00 each

P SECTION 4-5 / MISCELLANEOUS.

Making trench in soft soil of suitable width of 90 cm deep for laying cable or

4-5-1. 250 locating the fault all over the run and back filling the same and making the 55.00 rmt

surface as normal ground.

Covering of cable with second class bricks or cement tiles laid cover the cable

4-5-3. 250 crosswise & also on both sides with covering of 7. 5 Cm. layer of sand above 139.00 rmt

& below cable (16 bricks per meter)

Providing & laying approved make Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with necessary connecting

4-5-8. accessories of same material at required depth in existing trench for laying of

cable. below ground / road surface for enclosing cable

300 (A)50 mm outer dia 62.00 rmt

250 (D)120 mm outer dia. 136.00 rmt

SITC of Water Tight Junction Box of With necessary clamp for mounting of the J.B. (

MR 10 All the cable / wire connections to the JB shall be with the Water tight Glands only ) 1,780.00 Ea.

S SECTION 4-11 METAL PERFORATED CABLE TRAYS

Providing and fixing approved make Perforated C type cable tray. Made from

sheet steel. The cable tray should be single or double bended as per required

and as per IS 2062/1079 and shall be coated with hot dip galvanizing as per

4-11-1. IS 2629/4759. with max 17.5% perforation with coupler plate / Fish plate and

GI hardware like nut - bolt and washers etc. erection with necessary support(

included) as per Specification and as per instruction of engineer in charge..

T SECTION 5-1 / CEILING FANS AND ACCESSORIES

Providing and erecting Approved make Ceiling fan with double ball bearing ISI

mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep complete, canopy

erected on existing hook or clamp with earthing. [Make shall be approved by

Engineer in charge]

U SECTION 5-2 FAN ACCESSORIES

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe

5-2.1. 48 down rod erected duly painted for fan complete with proper insulation without 107.00 Mtr.

leakage and earthing.

Supplying & erecting Fan Hook of 10 mm M.S. Round bar grouted in RCC slab

with Making the site as original.

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the

RCC bars up to 50mm length each side and pierced through a 16 Gauge M.S.

box / Heavy Duty PVC box complete erected concealed in Ceiling with

necessary finishing.

Providing Fan clamp of 30 x 5 mm flat of required length & 10 mm M.S. Bolt &

Nuts erected with necessary hook of 10 mm M.S. Round Bar.

Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan

Supplying & erecting approved make low noise decorative exhaust fan having

5-3.3. 10 square frame ABS body with inbuilt lowers & square frame. 200mm with 1,353.00 each

5-3.6. 10 Providing suitable M.S. louver shutter of the Exhaust fan. 365.00 each

Supplying & erecting single phase approved make industrial exhaust fan

5-3-4. suitable for medium duty ring mounted low noise operation suitable for

medium duty having following dia size and maximum speed in RPM

4 [A] 305 mm dia 900 RPM Cat.II 2,034.00 each

V SECTION 8-10 / POWER CAPACITORS

Supplying & erecting bank of all polypropylene condenser (APP type) with

standard capacity of 2,3,5,7, 10,12.5 & 15 KVAR units of P.F. correction for

operation on 3 phase 50 c/s, 400 /440V (+ / - 10%) with externally discharging

resistance, earthing terminal & built on angle iron of channel iron frame work

and provided with terminal cover box. Complete erected on provided iron

bracket or on floor duly tested by license.

Providing & erecting capacitor duty contactor 3 phase, 415 V with proper

connection for following rating: (A) 10 KVAR

W SECTION 2-16 / LED LUMINARIES

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall

be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with diffuser with

company mark/name 160V to 270V, Power Factor more than 0.95, THD <

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(A) Tube Light with integral driver

(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet

60 Cat-lll 370.00 EACH

(v) 36-40 Watts, Surge-2 KV, IP-20, conventional 4 feet

40 Cat-lll 530.00 EACH

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall

be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure

die cast powder coated and high U.V. & corrosion resistance with diffuser

housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with

provision for spring loaded mounting clips complete.IP20

(iii) 16-20 watts, Surge-2 KV

10 Cat-lll 584.00 Ea.

(iv) 22-24 watts, Surge-2 KV

130 Cat-lll 751.00 Ea.

(B) LED Panel Light with provision for Plane front frame with translucent cover

fixed to housing complete.IP20

6 (vi) 36 watts, 24" x 24", Surge- 2KV 1,777.00 Ea.

6 (H) Mirror Light 9 Watts, wall mounted minimum 1 feet long 309.00 Ea.

Providing and erecting decorative wall bracket fittings complete with LED lamp

and rust free fittings components mounted in chrome finish housing with

2-6-1. 5 holder ,clear/opaque glass diffuser complete erected with lead wires with 1,696.00 Ea.

minimum 15 wattage capacity as per instruction engineer

incharge/architect/authority .cat-III

W STREET LIGHTING

Supply of approved make FRP Pole having following specifications: FRP

Light Pole made by CNC filament winding machine using thermoset resin

polyester/epoxy resin system) having minimum 62% glass content. The pole

should be in one piece and tapered round in shape, having smooth finish and

should be totally free from corrosion as well as non conductive & shock proof

Pole should be provided with FRP Anchor Base and it should be heavy duty,

or MS Material duly painted with Epoxy paint.

Pole should be flame retardant as per IS 6746. Resin used shall be UV

resistance and pigmented. A highly weather resistant polyurethane coating

shall be applied to the pole after applying suitable primer system that ensures

proper adhesion of the paint. Minimum coating thickness shall be 80 to

micron. Deflection of the pole shall not exceed more than 10% of the length of

6-1-7. CONTI pole for the given load“ Pole should be generally made as per the dimensional

data, performance criteria and some interchangeability features of poles as

per standard ANSI C 136.20 latest version or ASTM D 4923/01 including cable

termination box with necessary accessories . The size of pole and type of

installation with foundation as per manufacturer details and site requirement

(1) Suitable for base plate mounting single arm Bracket.

[H] Overall length of 6 Mtr. Average Thickness: 7.5mm

12 Top/ Bottom OD Dia A/F 89mm ± 2mm approx. approx. Weight of Pole 32 kg 13,920.00 Ea

approx. (Without Base) Anchor Base (Size 300X300 & 18mm Th.)

Providing Aluminium arm bracket of having 2 sets of suitable SS304

6-1-8 hardware for fixing the brackets & spread of 1.2 Mtr (Suitable for 89 to 114 mm

12 (A) Single arm bracket 2,212.00 Ea

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom

including excavation for the pole of size 45 x 45 x 100 cm. Deep in below

ground level with plinth of 45 cm x 45 cm (or 45 cm dia x 45 cm) high upper

ground level with necessary curing and finishing in approved manner.

( for 4 & 6 mtr pole)

Supplying and erecting LED street light / Flood light fittings with High power

White LEDs wattage of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with toughened

2-16-2. glass with company mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio

>0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.(

fittings required LM-79 & LM-80 certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection.

12 (iii) Above 60 to 90 watts Cat-lll 5,917.00 Ea.

(B) Flood Light (IP-65), Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection.

6 (vi) above 160 to 200 watts 9,552.00 Ea.

Supplying & erecting approved make Digital time switch having lithium cell

years operative and operate battery backup 1 channel day clock with

memory programme, suitable to operate on 240V + 5%, 16A with, floating

6-7-2. 1 contacts Minimum switching setup time 1 minimum & LCD display. Also 3,137.00 Ea.

comprised permanent ON/OFF switching. Programming switches & housed in

fire proof thermoplastic enclosure & transparent cover erected as required with

necessary connection erected as directed.

Supplying & erecting power contactor ,AC3 duty for time switch complete

erected as per direction Cat III

Z CCTV Surveillance & Networking System

2 MP IP BASED FIXED DOME CAMERA:

Dome camera, 1/2.8" CMOS, F2.0, Fixed Iris, Digital WDR, 30m IR, 0.02Lux,

1920x1080@30fps, Fixed 2.8mm Lens, Built-in Mic, IP66, PoE, Metal+Plastic housing,

Support tripwire and perimeter with Back box and mounting accessories

2 MP IP BASED FIXED BULLET CAMERA:

Bullet camera,1/2.8" CMOS, F2.0, Fixed Iris, Digital WDR, 50m IR,Fixed 4 mm Lens, 0.02Lux,

MR 4.00 5180 Nos

1920x1080@30fps, Built-in Mic, IP67, PoE, Metal+Plastic housing,Support tripwire and

perimeter with Back box and mounting accessories

40 Ch 4 SATA Supported NVR:

40-ch, 400Mbps/400Mbps, recording resolution up to 12MP, decoding ability 3×12MP, 4*8MP,

16*1080p, 32*720p, video output: 1 HDMI & 1VGA simultaneous output, alarm I/O 16/4, USB

interface: 1xUSB 3.0 1xUSB 2.0, RAID: JBOD,RAID0/1/5/6/10, ANR, N+M

Hard disk -8 TB ( for Recording 24 hour , 30 days )

Supplying & erecting approved make LAN cable of following size in existing pipe

as per directionSupplying & erecting approved make LAN cable of following size in

existing pipe as per direction

1200.00 [E] CAT - 6 shielded 94.00 mtr

SITC of Patch Panel Cat 6 UTP Keystone Type- 24 Port-Fully Loaded (Including Five year

free maintenance with guarantee)

SITC of CAT6 UTP 24AWG PATCH CORD:1M,Plug 30U' Snag less (Including Five year free

maintenance with guarantee)

SITC of CAT6 UTP 24AWG PATCH CORD:2M,Plug 30U' Snag less (Including Five year free

maintenance with guarantee)

SITC of 24 x 10/100/1000BASE-T PoE ports

4 x Gigabit RJ45/SFP Combo ports

Advanced L2 switching and security features

7-13-15 2.00 L2+ Static Routing 31,680.00 Ea.

Optional “standard mode” or “surveillance mode” management user interface

193 W PoE budget

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

SITC of Face Plate - Dual (Keystone Jack,square) (Including Five year free maintenance with

7-13-8 20.00 SITC of Jack Cat 6 Keystone UTP (Including Five year free maintenance with guarantee) 160.00 Ea.

Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate 1M , modules erected with necessary connections as per

site situation directed by Engineer In charge.

20.00 (8) Computer RJ-45 socket Cat.III 159.00 Ea.

20.00 (3) Two Pin/RJ-11 Telephone Socket [B] For Two Gang Cat.III 159.00 Ea.

Providing & erecting main Distribution (MDF) indoor type, back mounted frame as per

DoT standard approved with krone strips

2.00 (a) Suitable for 10 pair 985.00 Ea.

Providing & Erecting 6 core fibre optic SM 9/125um double sheath, CSTA, Unitube,

Outdoor cable (per m)

Supply,Installation,Testing and Commissioning of 30 ft HDMI Interface Cable Should

be 30ft Male to Male High-speed Category.

MR 1.00 Supply,Installation,Testing and Commissioning of 32 inch LED monitor. 16,500.00 Ea.

Supply,Installation,Testing and Commissioning of 9U Network rack with 5 socket

power strip & 2 Nos Exust fan and standard hardware set etc.

AA Digital Public Address System

Supplying & erecting Amplifier having following specification:

Power Output :250W (RMS) (300W Max.)

inputs : 6 Misc. & 2 Aux.

frequency Response :50-1500HZ I3db

Tone Controls :Cut & Boost type

LED Meter :5 LED Arrays

The amplifier suitable to operate 240V A.C.& 24volt D.C. (Battery) with

automatic changeover from AC to Battery operation, duly protected by wrong

Battery Polarity connections. [[Approved by Competent Authority i.e. not Below

the rank of Executive Engineer ]

SITC of Gooseneck microphone

Unidirectional condenser microphone

7-10-55. 1 Phantom powered by amplifier 11,927.00 each

On/off sliding switch with priority contact

Supplied with fixed 2 m (78 in) cable and lockable DIN connector (Including

Five year free maintenance with guarantee)

MR 640 Supply of 2 Core 15 AWG speaker Cable 95.95 each

SITC of Ceiling loudspeaker 6W metal clamp mount Suitable for speech and

music reproduction Easy to install Optional certified fire dome EN 54‑24

7-10-41 25 certified 2,898.00 each

[Approved by Competent Authority i.e. not Below the rank of Executive

Supplying and erecting approved make online Un-interruptible Power Supply

system comprising flat cum-boost charger with IGBT base rectifier & Inverter &

sealed maintenance free SMF batteries. The charger having operating

capacity for input 160-270V AC & inverter having output 230V,50 Hz Ac with

8-15-5. 0.8 load power factor with battery, over/under voltage output with over load &

short circuit protection equipment. The system housed in CRC sheet duly

powder coated paint with following power backup.with MS painted batteries

stand, 10% Overload capacity for momentary load.

1.00 (D) 5 KVA with 1Hr Backup 128,815.00 Ea.

AC WATER COOLER

Providing & erecting water cooler having storage capacity 150 Ltr. & cooling

capacity 150 Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. of the

water should drop by 15˚C within a hour, The water cooler should be

8-13-2 2.00 comprising of hermetically sealed compressor, fan motor, condensing unit, 49,069.00 Ea.

water tank surrounded by evaporating, coil, thermostats, relay etc.complete

with necessary inlet & outlet connection. The body of water cooler will be

made from Stainless Steel.

Supply and erecting of 35 watt Water Purifier with Intelligent purity sensor

system: it continuously scans the water to give 100 percent safe water, E-

boiling: this technology purifies water completely and destroys all known

disease-causing bacteria and virus to make every drop as safe and pure,

MR 2.00 High flow rate: the aquaguard hiflo delivers a high flow rate of 3 litres per 18,500.00 Ea.

minute delivering more water in lesser time, Mineral preserver system:

electronic impulses are produced to prevent scaling of the quartz tube, thereby

ensuring that precious minerals and nutrients are retained in the water, Power:

35 watts; operating voltage: 230 volts,

AC SEFTY EQUIPMENTS

10-2-3 Supplying rubber matting of following thickness as per IS:15652/IEC

10 (a)3mm 763.00 Sq.Mtr

Providing & erecting open well type horizontal mono block pump set with

stainless steel body having following specification

(A) 0.5 H.P. single phase open well motor pump set having discharge of

2 LPM @ 15 mtr. head suitable for 32 mm dia. delivery pipe with control panel 7,856.00 EACH

Providing & erecting open well horizontal mono block pump set with cast iron

body, complete for three phase submersible motor having

[B] For 2 HP 3 phase open well horizontal mono block pump set suitable for

200 LPM @ 25 mtr head suitable for 50 mm dia delivery pipe

Supplying and erecting Direct on line starter with 30 Amp. (resistive @ 230v)

power relay and with 2 to 5/ 4 to 10 / 8 to 20 amp. Range C.T. Operated

electronic overload relay in engineering grade plastic enclosure for 3 ph 415v

50 HZ A.C. motor up to 7.5 HP with high voltage protection (above 480 v) and

under voltage protection (below 330 v) current sensing single phasing 2,147.00 Ea.

protection. Reverse phasing protection, inverse current characteristic overload

protection with indication for On, OL, HV,LV SPP in a single unit with feather

touch start / stop push button, high temperature with standing Bakelite

terminals complete erected on P.W. Block with necessary connection. [Cat.II]

Deputy Executive Engineer(Elec) Executive Engineer(Elec)

ESTIMATE FOR ELECTRICAL WORK - LANDSCAPE GARDEN

Quantities estimated but

Item No. SOR / RA Item Description Estimated Rates Unit Amount

may be more or less

B Section :- 1- 3 / Conduits & Pipes

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or

1-3-2. ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of

pipes, in approved manner as directed

C Section 1-4 Mains & Wires

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with

heat resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts

50 (b) One wire 1.50 sq. mm 17.00 rmt

50 (e) One wire 6.00 sq. mm 56.00 rmt

50 (f) One wire 10.00 sq. mm 91.00 rmt

50 (h) One wire 25.00 sq. mm 234.00 rmt

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI marked copper wires of following

size to be erected as directed.

550 (e) 1.50 Sq.mm 3 core round PVC sheathed 46.00 rmt

350 (h) 2.50 Sq.mm 3 core round PVC sheathed 77.00 rmt

H SECTION 3-10 / MINIATURE CIRCUIT BREAKERS.

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V A.C. system and

3-10-1.(B) 100 having breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark Cat.III 111.00 each

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box having following capacity

2 (a) 6 to 32 Amp. Cat.III 590.00 each

5 (b)40 Amp. Cat.III 662.00 each

5 (c)63 Amp. Cat.III 730.00 each

I SECTION 3-11 / MCB DISTRIBUTION BOARDS

MR 10 SITC Of 32A x 250 Volt single phase Power socket outlet point having IP rating of IP:65 at convenient 7,500.00 each

SITC Of 32A x 415 Volt three phase Power socket outlet point having IP rating of IP:65 at convenient

MR 10 8,800.00 each

location with MCB.for outdoor duty.

J SECTION 3-12 EARTH LEAKAGE CIRCUIT BREAKERS

Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand

3-12.2. 2 capacity of 6 KA and suitable for operation on 3 phase and neutral 415V. having characteristic of quick action & tripping 3,010.00 each

with all advance feat (iii) 63 Amps. FP

K SECTION 3-13 / DANGER NOTICE BOARDS.

Providing and erecting metallic vitrified danger notice board for MEDIUM VOLTAGE installation to be erected as per IS.

L SECTION 3-14 EARTHING

Providing and erecting required size HOT deep Galvanised iron strip for earthing of H.T. , OCB/ ACB/ Transformer LT

panel board, Motors etc. using proper clamp.

3-14-5. 30 Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. 77.00 kg

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting Pipe-in-

Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm

having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia

of 12mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for

following type of applications with chamber and heavy duty cover. (A)(approved make OEM has to submit test certificate

including value of earth resistance of installation duly stamped and signed by agency and officer Incharge has to ensure

the value of earthing resistane mentioned in test Certificate) & having back filling compound of (B) Inner chemical (CCM

Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form,

Sulphar content:- <2%(C) Back fill Compound :- Earthing compound should be capable to retain moisture for long time

Necessary test report must be submitted by Agency.

(b)For Electrical installation up to 11 KV in normal soil.

3-14-9. 10 Length of Pipe : 2.00 mtrs 5,703.00 each

Back filling Compound :1 no. Bag of 25 Kg.

3-14-11. 10 Providing one bag of 25 Kg. Additional Back Filling Compound (BFC) suitable for safe earthing device. 700.00 each

M SECTION 3-16 / CUPBOARDS.

Providing , erecting , fabricating the M.S. structure as per requirement on site incorporating proper size of M.S.

angles,square,round, flats, bars, channels, sections complete with cutting, welding, grinding & finishing duly painted with

one coat of red oxide with erection on site as per direction of engineer in charge with necessary grouting, cementing,

3-16-4.A. 250 plastering & finishing complete. 77.00 kg

N SECTION 4-3 / ARMOURED ALUMINIUM CABLES

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid

on wall with necessary clamps or in existing trench / pipe of following size of cables

50 (A) 3 1/2 core 25 Sq. mm ( 16 Sq. mm 1/2 core) 182.00 rmt

250 (B) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core) 218.00 rmt

150 (D) 3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 core) 375.00 rmt

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Aluminium conductor for 1.1 KV. to

be laid on wall with necessary clamps or in existing trench / pipe of following size of cables

2400 (C) 4 core 10 Sq. mm 139.00 rmt

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid

4-3-5. (A) 350 on wall with necessary clamps or in existing trench / pipe of following size of cables (A) 4 core 16 Sq. mm 152.00 rmt

O SECTION 4-4 ARMOURED COPPER CABLES

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand / Solid Copper conductor for 1.1 KV. to be

4-4-4. laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables.

300 (A) 4 core 2.5 Sq. mm 269.00 rmt

350 (B) 4 core 4 Sq. mm 361.00 rmt

Q SECTION 4-6 / CABLE GLANDS.

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for following size of cables.

40 (A) 2 to 4 core 2.5 / 4 Sq. mm 33.00 Ea.

60 (C) 2 to 4 core 10 Sq. mm 38.00 Ea.

10 (D) 2 to 4 core 16 Sq. mm 47.00 Ea.

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC

insulated armoured cable complete with out going tails, insulating tape etc for following size of cables.

R SECTION 4-7 CABLE LUGS.

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high

4-7-1. pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner.

Solderless crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high

4-7-2. pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner.

250 (A) 1.5/2.5 to 6 Sq.mm 8.00 each

P SECTION 4-5 / MISCELLANEOUS.

Making trench in soft soil of suitable width of 90 cm deep for laying cable or locating the fault all over the run and back

filling the same and making the surface as normal ground.

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required depth for laying any size of cable or

locating the fault all over the run and back filling the same and making the surface as normal ground.

Covering of cable with second class bricks or cement tiles laid cover the cable crosswise & also on both sides with

covering of 7. 5 Cm. layer of sand above & below cable (16 bricks per meter)

Drilling the road without breaking the road surface (Asphalt) for laying of cable for feeding power supply by making up to

following size of holes at both ends complete.

100 (A) Up to 100 mm bore dia 488.00 rmt

100 (B) Up to 150 mm bore dia 610.00 rmt

Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II

4-5-8. )with necessary connecting accessories of same material at required depth in existing trench for laying of cable. below

ground / road surface for enclosing cable

2600 (A)50 mm outer dia 62.00 rmt

650 (D)120 mm outer dia. 136.00 rmt

SITC of Water Tight Junction Box of With necessary clamp for mounting of the J.B. ( All the cable / wire

MR 25 connections to the JB shall be with the Water tight Glands only ) with Required Ms Fabrication Support & 1,780.00 Ea.

W SECTION 2-16 / LED LUMINARIES

SITC of Any kind of garden Spike Light Fixture with Basic Rate of Rs. 5500 ( Garden Spilke Light)

(b) LED Bollard fittings of minimum height 600 mm & dia.100mm having polycarbonate clear/milky diffuser mounted on 3mm thick aluminium

2-16-3. 15 finished powder coated pipe with base plate 160x160mm with erection by M8x75mm fastner with required RCC foundation.IP65 for 9 to 20 3,130.00 Ea.

watt ,surge-4kv- cat-III

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with

housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast

powder coated and high U.V. & corrosion resistance with diffuser housed in aluminium casted body with company

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity between the ranges shown.)

2-15-3 65 (G) Step Light having Aluminium die cast and ABS Plastic material. 568.00 Ea.

(i) 5 watts, Direct/Indirect luminaire Cat-lll

W STREET LIGHTING

Supply of approved make FRP Pole having following specifications: FRP Light Pole made by CNC filament winding

machine using thermoset resin polyester/epoxy resin system) having minimum 62% glass content. The pole should be in

6-1-7. one piece and tapered round in shape, having smooth finish and should be totally free from corrosion as well as non

conductive & shock proof Pole should be provided with FRP Anchor Base and it should be heavy duty, or MS Material

duly painted with Epoxy paint.

Pole should be flame retardant as per IS 6746. Resin used shall be UV resistance and pigmented. A highly weather

resistant polyurethane coating shall be applied to the pole after applying suitable primer system that ensures proper

adhesion of the paint. Minimum coating thickness shall be 80 to 100 micron. Deflection of the pole shall not exceed

more than 10% of the length of pole for the given load“ Pole should be generally made as per the dimensional data,

performance criteria and some interchangeability features of poles as per standard ANSI C 136.20 latest version or

ASTM D 4923/01 including cable termination box with necessary accessories . The size of pole and type of installation

with foundation as per manufacturer details and site requirement are as below .

(1) Suitable for base plate mounting single arm Bracket.

[D] Overall length of 4 Mtr. Average Thickness: 7mm.

10 Top/ Bottom OD Dia A/F 89/145 mm ± 2mm approx. Approx. Weight of Pole 19 kg approx. (Without Base) Anchor Base 10,134.75 Ea

(Size 250X250 & 12mm th.) With 1SQMM3CORE Copper Flexible Cable , MCB And Numbering

[F] Overall length of 5 Mtr. Average Thickness: 7.5mm

50 OD Dia A/F 89/158 mm ± 2mm approx. approx. Weight of Pole 25 kg approx. (Without Base) Anchor Base (Size 12,084.50 Ea

250X250 & 16mm th.)With 1SQMM3CORE Copper Flexible Cable , MCB And Numbering

[B] Overall length of 3 Mtr Average Thickness: 7mm.

45 Top/ Bottom OD Dia A/F 89/130mm ± 2mm approx. Weight of Pole: 12 kg approx. (Without Base) Anchor Base (Size 8,609.75 Ea

Providing Aluminium arm bracket of having 2 sets of suitable SS304 hardware for fixing the brackets & spread of

Mtr (Suitable for 89 to 114 mm pole top dia)

45 (A) Single arm bracket 2,212.00 Ea

5 (B) Double arm bracket 3,416.00 Ea

10 (C) Triple arm bracket 4,403.00 Ea

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom including excavation for the pole of size 45 x 45 x

100 cm. Deep in below ground level with plinth of 45 cm x 45 cm (or 45 cm dia x 45 cm) high upper ground level with 801.00 EACH

necessary curing and finishing in approved manner.

( for 4 & 6 mtr pole)

Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum

housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/

lenses, with toughened glass with company mark/name engraved or embossed 160 to 270 V,Power Factor more than

0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line supply with over-voltage

55 (ii) above 48 to 60 Watts 4,948.00 Ea.

(B) Flood Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line supply with over-voltage

10 (vi) above 160 to 200 watts 9,552.00 Ea.

(C) Post Top Lantern LED fitting comprises of finish cast aluminum spigot and spun aluminum canopy fixed with opal

polycarbonate, pipe arrangement for vertical mounting driver and accessories wired upto terminal block.IP

45 (ii)32-40W Cat-lll 4,772.00 Ea.

Supplying & erecting approved make Digital time switch having lithium cell 6 years operative and operate battery backup

1 channel day clock with 14 memory programme, suitable to operate on 240V + 5%, 16A with, floating contacts Minimum

6-7-2. 2 switching setup time 1 minimum & LCD display. Also comprised permanent ON/OFF switching. Programming switches & 3,137.00 Ea.

housed in fire proof thermoplastic enclosure & transparent cover erected as required with necessary connection erected

6-7-5. Supplying & erecting power contactor ,AC3 duty for time switch complete erected as per direction Cat III

FEEDER SECTION PILLAR

FEEDER SECTION PILLAR TYPE A

Supplying, unloading at site, shifting to site, assembling, leveling, grouting, erecting, Testing, & Commissioning double

compartmentalized Street light control panel with IP 65 protection & Enclosure should be powder coated fabricated from

10 Gauge M.S. sheet & folded channel totally enclosed cubical type. with pad lock arrangement. The successful

tenderer will have to prepare general arrangement with dimensions & get it approve through Architect/ Consultant. All

civil work including RCC platform for street light panel should be in scope of Electrical contractor complete in all respect

as per detail drawing and directed by engineer in charge. with the 600 mm height MS angle covered stand.

The switchboard (panel) shall have provision for future expansion & shall be modular in construction. The bus bars shall

be connected with C type clamps without any drilling on the bus bars.

SITC of the IP 65 Smart Section feeder panel with space for Smart Energy monitoring system and 2 number of 3 phase

Energy meter of Supply Company for the Street Lighting Consisting of following Incoming : 100 Amp FP MCCB with the

spreader link with in built earth fault relay R-Y-B-On-Off indicating Lamp with control fuse.

AMC Approved 1 Set of 100 A. FP tinned copper busbars of EC. grade & adequate capacity, size & insulated with colour tape & should be 138,500.00 EACH

tined at all joints.

Auto/Manual bypass switch with indicating lamp

Meter : VAF meter equivalent to Enercon make ELF 3259 with 100/ 5 A Class 1 ct.

Outgoing : MCB's Should be of 10 KA.

Timer Equivalent to Theben make Astronomical type with the battery back up : 2 nos.

40 amp. FP Power Contactor : 2 nos.

6 - 32 amp. DP Power Contactor : 8 nos.

40 Amp. FP MCB : 4 nos.

6 -32 Amp. FP MCB : 2 nos.

6 - 32 amp. SP MCB : 36 nos.

63 Amp. FP MCB : 4 nos.

FEEDER SECTION PILLAR TYPE B

Supplying, unloading at site, shifting to site, assembling, leveling, grouting, erecting, Testing, & Commissioning double

compartmentalized Street light control panel with IP 65 protection & Enclosure should be powder coated

fabricated from 10 Gauge M.S. sheet & folded channel totally enclosed cubical type. with pad lock arrangement. The

successful tenderer will have to prepare general arrangement with dimensions & get it approve through Architect/

Consultant. All civil work including RCC platform for street light panel should be in scope of Electrical contractor

complete in all respect as per detail drawing and directed by engineer in charge. with the 600 mm height MS angle

The switchboard (panel) shall have provision for future expansion & shall be modular in construction. The bus bars shall

be connected with C type clamps without any drilling on the bus bars.

SITC of the IP 65 Smart Section feeder panel with space for Smart Energy monitoring system and 2 number of 3 phase

Energy meter of Supply Company for the Street Lighting Consisting of following Incoming : 63 Amp FP MCB with the

spreader link with in built earth fault relay R-Y-B-On-Off indicating Lamp with control fuse.

AMC Approved 2 Set of 63 A. FP tinned copper busbars of EC. grade & adequate capacity, size & insulated with colour tape & should be 118,000.00 EACH

tined at all joints.

Auto/Manual bypass switch with indicating lamp

Meter : VAF meter equivalent to Enercon make ELF 3259 with 63/ 5 A Class 1 ct.

Outgoing : MCB's Should be of 10 KA.

Timer Equivalent to Theben make Astronomical type with the battery back up : 2 nos.

40 amp. FP Power Contactor : 2 nos.

6 - 32 amp. DP Power Contactor : 8 nos.

40 Amp. FP MCB : 2 nos.

6 -32 Amp. FP MCB : 2 nos.

6 - 32 amp. SP MCB : 18 nos.

5 KVAR Capacitor with the 40 amp TP capacitor duty contactor with the 10 minute time delay relay.

Panel Should Have lockable Space to incorporate the 2 nos of the 3 phase energy meter with its main switches with

separate cable entry with separate compartment & Separate door.

Deputy Executive Engineer(Elec) Executive Engineer(Elec)

RECAPITUALATION

1) Name of work – Construction of Development of Lake, New

Construction of Cremitorium at FP No.- 367,TP 76/B Chandkheda Gam.

Plot area - 17890.00 sq.mt. ( Including Lake area ) Date:- 11.08.2025

Lake area - 5058.00 sq.mt.

Sr.No Particulars Estimated Amount

1 CNG Cremetorium and Seating area Block

2 Wood Cremetorium and Seating area Block

5 Landscape area

6 Compound wall

7 Electrical work (Cremitorium)

8 Electrical work (Garden )

Total Amount without GST

Total Amount without GST

Total Amount With 18% GST

Total Amount With 18% GST