PROVN OF EMERGENCY EXIST IN HITU (KOCHI), PCBO BLDG NO P-337, PROVISION OF TILING AT P-315, DSC MD ACCN AND ADDITION/ALTERNATION TO PLINTH PROTECTION AND PROVISION OF HARD STANDING ALONGWITH DRAINGAE SYSTEM AT BLDG NO T-29 CMO OFFICE AT NAVAL BASE,KO

Amount

M&L Surface excavation in soft/loose soil n exc 30cm deep and averaging 15cm deep and getting out complete all as specified and directed.

M&L for Cement concrete type B-1, 1:2:4 (20mm graded aggregate) for coping or chamfered on edges complete all as specified and directed.

M&L for 100 mm thick PCC 1:4.8. Type D-2 using 40 mm graded stone aggregate complete all as specified and directed.

M&L for Hardcore of broken stone of gauge n exc 63mm deposited spread and levelled in layers n exc15cm thick watered and rammed to a true surface all as specified.

M&L for Coarse aggregate for granolithic floors graded from 12.5mm to 4. 75mm spreading and levelling in layers n exc. 25 cm thick and well ramming including watering as required all as specified and directed.

S&F Machine pressed precast concrete interlocking paver block any shape and size conforming to IS15658-2006 of 60mm thickness M-35 Grade with grey cement and pigment complete all as specified and directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation and getting out in soft/ loose soil complete all as specified and directed.

Removing excavated soil exc.250m but n.exc 500m and depositing where directed by Engr-in-charge.

M & L for Cement concrete in surface channels and drains in PCC 1:2:4 complete all as specified and directed.

M&L Cement concrete in foundations, filling and mass concrete type C2 1:3:6 (40mm graded aggregate) complete all as specified and directed.

M&L for cement concrete type B1 1:2:4 using 20 mm graded aggregate as in coping and use waste of formwork etc complete all as specified and directed

M&L for precast cement concrete Type C1 1:3:6 (20 mm graded aggt)solid blocks masonry exc 10 cm in width and set in CM 1.6 complete all as specified and directed.

M&L 15 mm dia thick plaster on fair faces of brick or concrete surfaces in cement and sand mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M & L for precast cement concrete type B1, 1:2:4 (20mm graded stone aggrigate) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar 1:6 complete all as specified

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-W (Gde E 250) Quality A or Fe-290 (Gde E-165) complete all as specified and directed

All as per item no.15 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

S&F Framed work (Fe-290 grade E-165) as in doors, grill or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete all as specified and directed.

M&L for preparation of new steel Surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of anti corrosive Epoxy paint over a coat of Epoxy primer, over a coat of red oxide on steel surfaces complete (Make-Asian Apcolite or Equal from Berger, Nerolac) complete all as specified and directed.

S & F 150MM dia of PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

M & L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

Demolition of cement concrete unreinforced in any Position not otherwise specifically provided for complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing servicable tiles to store and rubbish off the permises complete all as specified and directed.

M&L PCC type B-0, 1:2:4 (12.5mm graded aggregate) 25mm thick complete all as specified and directed.

M& L for Glazed ceramic tiles in vertical surface 450x300x6-7mm or 600x300x 6-7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10 mm thick in CM 1:4 on fair face of brick work or concrte surface finished to receive tiles complete all as specified and directed.

M&L Non skid ceramic tile of size 400x400x7-8mm thick in floor over cement screed 15 mm thick in CM 1:4 set and jointed in neat cement slurry and pointed in appoxy joint filling minimumum 5mm depth and 2mm thick spacer width complete all as specified and directed by Engr-in-charge. (Epoxy joint filling paid seprately) complete all as specified and directed.

M&L Non-Skid Ceramic tiles of size 600X600 X7-8mm thickness in floors with approved Pattern over cement sreed 15 mm thick in CM 1:4 etc set and jointed in neat cement slurry and pointed in appoxy joint filling minimumum 5mm depth and 2mm thick spacer width complete all as specified and directed by Engr-in- charge. (Epoxy joint filling paid seprately) complete all as specified and directed.

All as per item no. 26 as in skirting over cement backing coat 10 mm thick in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M & L for Machine cut Pre polished kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing incl 15mm thick screed bed in CM 1:6 complete all as specified.

M&L Pre polishied Kota stone slab 18-20mm thick (in single piece) in riser of steps, skirting, dado and pillar laid over backing coat 10mm thick CM 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing complete all as specified and directed.

M&I 18-20 mm thick makrana white Marble tile laid over cement screed CM 1:4 15 mm thick and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing complete all as spcified as boarder to kota stone flooring complete all as specified and directed.

Demolition of stone slabs of any description or thickness laid bedded in any motar complete all as specified and directed.

M & L for 18-20mm thick granite stone slab( Jet black ) over cement screed 15mm thick in CM 1:4 over RCC Slab complete all as specified and directed

S&F PVC Nahani Trap 75mm (SWR) floor trap, plain with grating including jointing with solvent or cement complete all as specified and directed.

M&L for epoxy tile joint filling for item No 25 & 26 using Kerapoxy of MPAEI or equivalent on floor walls complete all as per manufacturer instruction complete all as specified and directed.

Removal of door shutter (Paneeled/Gauged) and Re fixing after easing, reparing and re-fixing in same position complete all as specified and directed.

M&L for mild steel Fe 290 Gde E-165 Stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, etc. complete all as specified

M & L for mild steel Fe 290 Gde E-165 Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes with riveted, bolted or welded attachment complete all as specified.

M & L plain cement concrete type D-2 1:4:8 (using 40mm graded stone aggregate) as in foundation filling and mass concrete all as specified and directed.

Returning filling in soft/loose soil including spreading leveling watering and wall ramming in layers not exc 25 cm thick all as specified and directed.

M & L RCC (Nominal mix) type B1- 1:2:4 (20MM graded aggregate) for Foundations, including rafts, footings, foundation beams; plinth beams, bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&LFormwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work, vertical or to batter flat rough finished surface complete all as specified and directed.

M&L for Cutting openings, through brick walls (in cement mortar) for door, window and other openings or enlarging existing openings converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m complete all as specified and directed.

S&F aluminum powder coated door shutter with frames of size - 40x45x1.8 mm incl. screwing of frame glass necessary joints cleats, glazing clips rubber packing, snap beading, suitable handle, tower bolt, SS butt hinges, mortice lock 4 lever with 65 mm latch size including aluminium anodized door frame of size 60x 40 x1.8 mm thick fixed to wall with necessary screws and plug complete all as specified & directed. (rates for one no hydraulic door closer per shutter & 5 mm thick tinted glass /4mm thick ACP sheet reqd to be fitted in shutters is included in the item) complete all as specified and directed.

M&L 15mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for two coats of oil bound distemper over a coat of 1.5mm thick wall care putty to newly plastered surface including preparation of surfaces complete all as specified and directed by Engr-in-Charge.

M&L for pre-painted galvanume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed to with self tapping screws complete all as directed.

M&L for pre-painted galvanume aluminium zinc coating GI based plane steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed to with self tapping screws complete all as directed.

M/s Antony Kallarakkal

MS BUILDERS

Anaswara Constructions

EXCEL ENGINEERING

WELTRONENGINEERINGSERVICES

Anjaneya Builders and Designers

Yesgee Projects Private Limited