RequiredExperience with Government
RequiredAnnual Turnover
RequiredCertificate (Requested in ATC)
RequiredOEM Authorization Certificate
RequiredOEM Annual Turnover Bid to RA enabled No Note: 1. OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product during the last three years
Requiredending on 31st March of the previous financial year
Requiredshould be as indicated in the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant/Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the date of constitution/incorporation of the OEM is less than 3 year old
Requiredthe average turnover in respect of the completed financial years after the date of constitution shall be taken into account for this criteria. Backhoe Loaders ( 29 pieces ) Technical Specifications 1/8 * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) Certification Parameters Vehicle Certification ARAI * Vehicle Certification ARAI/VRDE/ICAT No - * Compliance to IS 20474-4 for EARTH- MOVING MACHINERY—SAFETY REQUIREMENTS FOR BACKHOE LOADERS Yes * On Buyer's Demand
RequiredTest certificate Yes * Generic Parameters Engine Model - * Engine Maximum HP (BHP@ RPM) (range) - 91-96 Engine Maximum HP (BHP@ RPM) 92 * Engine Rated RPM 2200 * No of Cylinders (Nos) 4 * Engine Bore (mm) 103 * Engine Stroke (mm) 132 * Engine Cooling System Water Cooled * Max Torque (N- m@rpm) 408 350.0 - 430.0 Or higher Fuel Injection system - * Torque Backup (%)REM)-III A - * Vehicle Emission Complaince BS III BS III
RequiredBS IV Or higher Vehicle Mileage ( declared by OEM as certified by Test Agency under Rule of CMVR 1989) (Km/Ltr) 6 * No of Air Cleaner 2 * No of Fuel Filters 3 * Type of Gear Box - * No of speeds Forward (Nos) 4 * Maximum Forward Speed (Km/hr) 38 * 2/8 Maximum Reverse Speed (Km/Hr) 38 * Minimum Forward Speed (Km/Hr) 7.26 * Minimum Reverse Speed (Km/Hr) 7.26 * Power Steering Yes Yes Steering wheel dia (mm) 400 * Brake type - * Specific Fuel Consumption (SFC)in g/hp/hv (g/hp/hv) - * Minimum Turning Radius (mtrs or mm) with brakes 5200 * Minimum Turning Radius (mtrs or mm) without brakes 5750 * Fuel Tank Capacity (Litres) 128 * Fuel Tank Oil Pan Capacity (Litres) 128 * Type of Wheel Drive Four Wheel Drive Four Wheel Drive Front Tyre Size with ply rating (mm) - * Rear tyer Size with ply rating (mm) - * Minimum Ground Clearance (mm) 300 More than 250.0 Or higher Backhoe Bucket Width 845 * Backhoe Bucket Capacities in Cubic Metre with locking/bolted teeth - More than 0.26 Or higher Backhoe Bucket Digging Depth 4.77 4.77
Required4.9
Required5.36 Backhoe Bucket Digging Force in Kgf - More than 5700.0 Or higher "Backhoe Bucket Dipper Tear out Force in Kgf" - More than 3010.0 Or higher "Backhoe Bucket Loading Height in metres" 4.1-4.5 3.3-4.0
Required4.1-4.5 Or higher Backhoe Bucket 5.7-8 1.12-5.6
Required5.7-8 Or 3/8 Loading Reach in metres higher "Backhoe Bucket Reach from swing Pivot" 5610 * Type of Loader Bucket Bottom Dump Bucket Bottom Dump Bucket Loader Bucket Minimum Capacity 1 More than 1.0 Or higher Loader Bucket Dump height in metres 2.81-3.10 2.81-3.10 Or higher Loader Arm Break out Force in kgf - More than 4550.0 Or higher Loader Bucket Maximum reach at full height in meter 1.15 1.15 - 1.5 Or higher Loader Bucket Pay Load in kgs 1800 1800.0
Required1850.0
Required1980.0 Loader Bucket Dig depth 150 More than 130.0 Or higher Operating Weight (Kgs) 8010 8010
Required8400
Required8470 Transmission Oil Capacity (Litres) 17.5 * Hydraulic Oil Capacity (Litres) 130 * Hydraulic Oil change period 2000 More than 130.0 Or higher Di-Ethyl Ether Type Cold starting Kit (to start the CI engine upto -25°C) No * Rock Breaker No * Rock Breaker Operating Weight NA for without Rock Breaker * Rock Breaker Operating Pressure (Kgf/cm2) NA for without Rock Breaker * Rock Breaker Strike rate (350 blows per minute)min NA for without Rock Breaker * Constructional Parameters Instrument Panel Yes * Hour Meter Yes * Fuel Gauge Yes * Temperature Gauge Yes * Battery Charge Indicator Yes * 4/8 Horn Yes * Oil Pressure Gauge Yes * Battery Type - * Battery Rating - * Electrical Alternator - * Electrical Starter - * Front Lights Yes * Rear Lights Yes * Parking Lights Yes * Brake Lights Yes * Plough Lights No * Indicators Lights Yes * Overall Length (mm) 6350 * Overall Width (mm) 2350 2350.0
Required2380.0
Required2440.0
Required2500.0
Required2560.0 Overall Height (mm) 3900 * Wheel Base (mm) 2240 2240.0
Required2340.0 Cabin/canopy All round visible cabin With easy Walk Through Access Yes Yes Cabin Instumental panel with audio indicators Yes * Cabin Instumental panel with visual indicators Yes * Rear view large convex mirror Yes * Front screen wiper Yes * Front and rear horn Yes * Seating Plan Co- Adjustable driver seat with one helper seat Yes * Doors Front door with fixed toughened glass & locking mechanism with wiper Yes * Glasses Yes * Paint Standard automobile paint to the exterior body as per CVMR rules Yes * 5/8 Performance Parameters Noise level at operator s ear level (dB) 85 * Vibration at seat No * Vibration at seat (if yes) (micron) 0 * Average travel speed (Km/hr) 22 * Average fuel consumption (litre/hr) 6 * Average distance travelled per litre of fuel(Km) 2.4 * Excavator loader to perform various functions such as digging Yes * Dozing
RequiredYes * Grabbing
RequiredYes * Grading Yes * Loading Yes * Spreading Yes * Warranty Time (Month) 12 12.0
Required24.0 Operating hours during warranty period 2000 2000.0 Battery Warranty (months) 12 12.0 * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
