PROVN OF 04 X HIGH MAST LIGHT WITH 4 X LED FLOOD LIGHTS 150 WATT EACH AT 71 WEU IN ARMY AREA JODHPUR

Amount

Fixing only flood light fittings LED type of any watt and any size suitable for mounting on High mast or bracket arms with pole fixing attachments and proper fixing/connecting of service cable from pole box to street light fitting complete all as specified and as directed. Note:- (i) LED flood fitting any type shall be issued under Schedule 'B' free for fixing. (ii) T&P required for fixing will be arranged by contractor and cost of the same shall be included in the quoted rate of this item. (iii) Steel tubular swaged pole and bracket arm shall be measured & paid separately under respective items.

M&L for 12.0 metres long steel tubular swaged poles type 410 SP-6, complete with cast iron base plate, finial taper plug, bolts, nuts & screws complete all as specified and as directed.

M&L for laying/replacement of unserviceable cable/ LT OH line, LT under ground cable XLPE insulated PVC sheathed 1100 V grade armoured heavy duty aluminium conductor cross sectional area 4 Core X 10 Sqmm including testing & commissioning complete all as specified and as directed. Note : (i) LT XLPE cable will be issued by department free for laying under Sch 'B'. (ii) Transportation of cable from store to work site shall be arranged by contractor at his own cost and shall be included in the quoted rate of this item. (iii) Earth work, cable protection cover and sand cushioning shall be measured and paid separately.

M&L for 4 core XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 4 sq. mm complete all as specified and directed.

M&L for cement concrete (1:3:6) type C -2 using 40 mm graded stone aggregate for foundation of pole /struts/stay assembly etc complete all as specified and directed.

M&L for cement concrete (1:3:6) type C -1 using 20 mm graded stone aggregate for pedestal of poles/copping including necessary form work for fair finishing to exposed surfaces without using extra cement complete all as specified and directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for laying of cables, erection of poles, struts/stays, leveling of yard etc not exceeding 10 M² on plan and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches not exceeding 1.5 mtr wide and exceeding 1.5 mtr but not exceeding 3.0 mtr in depth for erection of poles, struts/stays, etc not exceeding 10 M² on plan and getting out in soft/loose soil complete all as specified and directed.

M&L for screened un-washed river sand for cushioning to underground cable complete all as specified and directed. Note:- The punning thickness of sand cushioning shall be measured.

Supplying and laying of reinforced precast concrete cable cover, class LV, type I flat, size 250mm x 150mm x 40mm and abutting each other with gap between adjacent precast concrete cable cover shall not exceeding 10 mm over underground cables for protection complete all as specified and directed.

Returning, filling in, including spreading, levelling watering and well ramming in layers n.exc 25 cm in soft/loose soil.

Removing of excavated soil not exc. 50 M and depositing where directed at a level n. exc 1.5 M above the starting points all as directed by EIC.

M&L for Earthing complete with galvanized steel earth plate electrodes 60x60x6 mm thick buried directly in ground earth (earth pit not less 2.25 m deep below ground level) with top edge of the plate not less then 1.5 mtr below normal ground level connected to galvanised iron earthing strip 32mm x6mm thick by means of bolt nuts check nuts and washers of galvanized iron or steel all as specified & shown in electrical plate No.3 of MES SSR part-I 2009 connected to earth test point as specified and testing on completion including watering pipe shall be 20 mm bore medium grade including all excavation & earth work in any type of soil incl PCC pit (1:3:6) type C-1 with RCC cover including charcoal , salt, funnel, all as directed at site. NOTE:- The cost of excavation & earth work in any type of strata as shown in electrical plate No 3 shall be included in quoted rate of this item.

M&L for 80mm dia GI tubing medium grade (ISI marked) with all fitting/accessories for protection of cable on pole/wall and under road crossing including clamps, nuts bolts etc complete all as specified and directed.

All as per Item No but for 50mm dia

M&L for motorized auguring/drilling in road at 90cm depth of dia suitable for laying of 80 mm dia GI tubing pipe.

M&L for steel structure, cross arms bracing supports ,clamps, back plates of any type, section incl. nuts, bolts, washers, welding ,bending cold or hot in any size and circular shape incl hanging arrangement for LED flood light complete all as specified and directed.

M&L for ZEBRA painting of PCC/Steel tubular poles 9/11 m long alongwith road upto 1.5m height from pedastal, with two coats of synthetic enamel paint in 30 cm height incl painting of pole coping with white paint complete all as specified & directed.

S&F sheet metal enclosures for MCB distribution board SPN 4 way double door type with 200 amp rated bus bar and suitable for SPN Isolator as incomer complete all as specified

S&F Isolator four pole, 40 Amp, 240 Volt complete all as specified and directed.

Shri Electrical Enterprises