Construction of Aspirational Toilet on Ram-Sharnam Chowk on Jind Road in MC GOHANA.

S/I/T/C of Solar Type Street Light fitting, 40 watt (luminous flux 6000 lumens) with solar panel 5V/120 watt (Solar Panel life span 25 years. Battery Voltage/ Capacity 3.2 Volt/140 AH (Better Life Span 8-12 Years). Light sensor control mode arrangement, MS pole 5 Mtr long with bracket and warantee 5 years incliuding Civil and Electrical works complete in all respect.

Providing and Fixing Shoe polish Machine of reputed make as per the satisfaction of Engineer-in-charge.

Providing and Placing PVC Pot (Gamla) of size 1.5 ft, 1 ft dia green in color including Decorative Plant as per satisfaction of engineer-in-charge.

SITC of feedback mechanism in Toilet as per satisfaction of Engineer-in-charge.

Stainless Steel Sign Board for identification of Toilets Units as per the satisfaction of Engineer-in-charge.

Cleaning Equipments and Consumables as per the satisfaction of Engineer-in-charge.

S/I/T/C of 1 kw solar system complete in all respect.

(DSR 8.2.2) LED Down lighter (SMD Type) (System lumen efficacy =120(135lm/Watt) Supplying, installation, Testing and Commissioning of LED Recessed/surface Down lighter (Round/ square/ Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency )85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C centigrade, internal surge protection of 2.5 KV with Short and Open circuit protection ,THD ( 10%, P. F.=0.95, IP20, CRI )80, UGR (Unified Glare Rating) (19, Flicker free (flicker should be below 5 %), life time (LED, Driver and electrical circuitry), life time of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) (3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy =120 (135 lm/Watt output . LM79 and LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-inCharge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminium Body including trim. (8-10 Watt)

Providing and Installation the ISI marked (Capacity 02 Kg each) ABC Type Fire Extinguisher complete in all respect as per the satisfaction of engineer-in-charge.

Providing and Fixing of Indian make Hand Dryer including the cost of gutties, screws, Electric Wire, 3 Pin top 5 Amp complete in all respect.