Addn/ Altn to bldg No P-3 Mandakini Holiday Home Mussorrie, Provn of toilet block near Birpur filtration plant and 03 x overhead cover for vertical rope stand and shed (20x25 feet) with hard standing for housing open gymnastic equipment at Birpur und

Amount

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concretebut excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and ditected.

M&L for brick work with fly ash bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and ditected.

M&L for Brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and directed.

Taking down cement plastering of any description on brick/stone/concrete wall surfaces of any description incl racking out joints hacking for key,scrubbing down with water etc. complete all as specified and as directed.

M & L for rendering (screed bed or bedding when the concrete is still green) 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth using extra cement mixed with water liquid proofing admixture as per manufacturer's instruction etc complete all as specified and directed by Engineer-in-Charge. Note - WPC will be mesaured and paid separately.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished surfaces even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished surfaces even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.

M & L rendering 10mm thick in cement mortar 1:3 on fair faces of concrete work even and smooth without using extra cement as in ceiling complete all as specified and ditected.

M&L 15 mm thick rendering in cement mortar 1:4 on other than fair faces of brick work or concrete surface, surface finished even and fair without using extra cement complete all as specified.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surface in cement mortar 1:6 finished fair and even without using extra cement complete all as specified and directed.

M&L for two coats of distemper oil emulsion over applying of 1-1.5mm thick wall care putty finish wall surface even & smooth by roller on new wall surfaces including preparation complete all as specified and directed.

M&L for complete removal of existing treatment of walls incl corners and applying two coats of distemper oil emulsion over applying of 1-1.5mm thick wall care putty finish wall surface even & smooth by roller complete all as specified and directed.

M&L for texture paint on old/new surfaces of wall as per approved coloured and design including preparing wall surfaces (as approved by GE) complete all as specified and directed by Engr-in-Charge

M&L for preparation of painted surfaces of external wall with scrapping, wire brushing, washing with water and applying two coats of exterior grade 1st quality weather coat paints over a coat of alkali resistant priming paint complete all as specified and directed.

M&L complete removal of existing treatment from painted surfaces of external wall with scrapping, wire brushing/ sand grinder, washing with water and applying two coats of exterior grade 1st quality weather coat paints over a coat of alkaliresistant priming paint complete all as specified and directed. Make : Berger XP advance (long life exterior emulsion paint), Asian Paints (Apex Ultima), Nerolac (Excel total)

M&L for two coat of synthetic enamel paint of any tint, over a coat of pink primer including preparation of new wooden surfaces of any description, not overwise described, over 10 cm width/girth complete all as specified and directed.

M&L for preparation of old painted surfaces of wood over 10 cm width/girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Dismentling floor hearth or wall tiling including cement motor bedding (But not backing), removing serviceable tiles to stone and rubbish off the premises complete all as specified.

M&L for Vitrified Ceramic tiles Dark shed /double charged 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. including screed bed 15 mm thick in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile adhesive complete all as specified.

All as per item No 19 here-in-above but as in skirting over and including 10 mm thick rendering in cement mortar 1:4, complete all as specified.

M&L non-skid / mat finish designed coloured joint free ceramic tiles of size not less than 400 mm x 400 mm x 6- 7 mm thick in floor, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 complete all as specified.

M&L for coloured Non Skid Ceramic joint free tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed 15mm thick in CM 1:6 complete all as specified and directed.

M&L for coloured Glazed ceramic tiles in vertical surfaces of size 300mm x600mm x 7mm/ 450x 350 x 7mm thick over and including 10 mm thick bedding layer / rendering in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as directed.

Demolition of Stone slabs and tiles laid, bedded in any mortar of any description or thickness in floors, aprons etc complete all as specified.

M&L 18 to 20 mm thick machine cut polished granite 1st quality "black or coloured" stone slab over kitchen platform and similar places over and including 15mm thick screed bed in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match with existing surface including grinding and moulding of exposed edges of granite complete all as specified and as directed.

Taking down chowkat with shutter of any description n. exc 1.5 Sqm each complete all as specified and as directed by Engr-in-Charge.

Taking down chowkat with shutter of any description exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and as directed by Engr-in-Charge.

Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each and refixing in same opening after necesssary repair complete all as specified.

M&L mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, ball bearing and other similar works etc, complete, drilled for fixing of steel sheeting or other covering,,doors, etc to be prepared for hanging or sliding conforming to Fe-290 Gde E 165 complete all as specified and directed.

Supply and fix flush shutters 30 mm thick one face is covered with decorative face veneer teak wood finished with lipping/frame to match , solid core construction, with block board core and plywood face panels, commercial type on other sides complete all as specified and as directed.

Supply and fix flush shutters 30 mm thick one face is covered , solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S & F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete.

S & F Factory Made Solid PVC Moulded Door Shutter, 24 to 28mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as shown in SSR Part – II 2010 and as directed by GE/Engineer-in-Charge.

S&F 200 mm long, solid in one piece stainless steel barrel tower bolts gde 204 complete all as specified and directed by Engr-in-charge.

S&F 150 mm long stainless steel barel tower bolt gde-204, of extruded section complete all as specified and as directed by Engr-in-Charge.

S&F 150mm size solid in one piece stainless steel handles,D type, gde-204, fixed with stainless steel screws complete all as directed complete all as specified and directed by Engr-in-Charge.

S&F 125mm size solid in one piece stainless steel handles, Gde-204, D type, fixed with stainless steel screws complete all as directed complete all as specified and directed by Engr-in-Charge.

S&F 100 mm size stainless steel butt hinges gde-204 and fixed with stainless steel screws, complete all as specified and directed by Engr-in-Charge.

S&F stainless steel sliding door bolts 304 grade, hasp and staple type with bright bolt not less than 12mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 250mm long complete all as specified and ditected.

S&F 300 mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed all as specified and as directed..

S&F in repair peg set of five stainless steel fixed on CP steel plate 304 grade including fixing screw as per approved sample.

S&F in repairs glass corner shelf suitable size made of 5mm thick toughned glass complete all as specified.

S&F in repair 25 mm dia stainless steel polished 304 grade drapery rod 1mm thick with final decorative, including brackets, decorative finished at both ends complete all as speccified and directed as per approved sample.

S & F Solid PVC wall Lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing incl removing existing unserviceable wall linning all as specified.

S&F in repairs CP brass Soap dish 6 inches complete all as specified and directed.

S&F CP brass Soap dish 6 inches complete all as specified and directed.

S&F in repair PVC Shelves 450mm of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105 gms) complete all as specified.

S&F PVC Shelves 450mm of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified.

S&F in repair plate rack 300mm and size 100 x 80 cm made out of 1.00 mm thick stainless steel fixed to wall with brass screws complete all as specified and as directed.

S&F in repairs stainless steel kitchen sinks without draining board ISI marked made of stainless steel 1 mm thick, with plugs, washers and wastes, including bedding lime cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 415mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified.

Demolition of reinforced cement concrete, shelves, chajjas, slabs and similar work carefully and matching to adjoining disturbed surfaces complete all as specified and directed.

M&L for RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and colums, in floors, roofs, landing balconies, canopies, deck slabs, chajja and in shelves and the like, complete all as specified and directed. Note : The work will be carried out upto tripple storey builing the rate of scafolding is included for this item also.

M & L cement concrete 1:2:4 nominal mix type B1 (using 20mm graded stone aggregate) for foundations, including rafts, footings, foundation beams;plinth beams; bases for columns, etc.; basement slabs,under-reamed piles and massconcrete complete all as specified and directed by Engineer-in-Charge.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc 200mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete.

Use and waste form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floor and roofs, sides of RCC/PCC bands in walls, horizontal or sloping and similar works exc 10 cm but not exc. 20 cm wide for fair finished surfaces of concrete complete all as specified and directed.

Use and waste for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter flat fair finished surfaces of concrete complete all as specified and directed.

S&F TMT MS bar 8 mm dia & over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire ( annealed) not less than 0.9 mm dia complete all as specified.

M&L Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed.

All as per item No 58 here-in above 5mm dia and over upto and including 10mm dia bar as in stirrups, spacers and binders complete all as specified.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing complete all as specified.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing complete all as specified.

M&L cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting not exc 10cm girth complete all as specified.

Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Supply, fixing, laying & testing 25mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Supply, fixing, laying & testing 40mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F in replacement rotational moulded polyethylene 1000 Ltrs Capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float three layer external and internal white and fly nut complete screwed down for iron pipe of 20 mm dia all as specified and directed. .

S&F rotational moulded polyethylene 2000 Ltrs Capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float three layer external and internal white and fly nut complete screwed down for iron pipe of 20 mm dia all as specified and directed. .

S&F rotational moulded polyethylene 500 Ltrs Capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float three layer external and internal white and fly nut complete screwed down for iron pipe of 20 mm dia all as specified and directed. .

S&F in repair ball valve high pressure of PTMT with epoxy coated alum rod & high density plastic ball screwed for 15mm bore iron pipe and fixed ( minimum weight 20mm -210 gms) complete all as specified and directed.

S&F in repair CP toilet paper holder as per sample approved by Engr-in-Charge.

S&F in repair CP brass wall mixer with Telephonic shower, complete all as specified and direcated.

S&F in repair CP Brass 3 in 1 hot & cold 15 mm dia wall mixer for mixing hot & cold water with telephonic shower provn with connecting legs & flanges complete all as specified and directed.

S&F CP brass wall mixer 3-in-1 system with provision of over head shower and telephonic shower complete with 115mm long bend pipe, complete all as specified.

S&F in repair central hole basin mixer cast copper alloy chromium plated, fancy type suitable for 15mm dia GI pipe complete all as specified.

S&F central hole basin mixer cast copper alloy chromium plated, fancy type suitable for 15mm dia GI pipe complete all as specified.

S&F in repair 15mm bore Bib taps short body, cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair 15mm bore Bib taps long body, cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F 15mm bore Bib taps long body, cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair 15 mm bore Angle cock/stop valves (2 in 1), cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified.

S&F 15 mm bore Angle cock/stop valves (2 in 1), cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified.

S&F in repair PVC Health Faucet with 1 mtr metalic Expandable tube & hook complete all as specified and directed and approved by Engr-in-Charge.

S&F PVC Health Faucet with 1 mtr metalic Expandable tube & hook complete all as specified and directed and approved by Engr-in-Charge.

S&F in repair 20 mm dia brass chromium plated tubular towel rail, D type, 60 cm long between flanges fixed with rawl plug complete all as specified and directed.

S&F 20 mm dia brass chromium plated tubular towel rail, D type, 60 cm long between flanges fixed with rawl plug complete all as specified and directed.

S&F in repairs brass chromium plated shower rose, 125mm size with or without swivel joints including fixing to steel pipe or union.

S&F in repairs vitreous china water closet padestal pattern (white) with 'P' or 'S' trap including flush pipe, seat cover with chromium plated hinge divice, fixing in floor with brass screws and necessary connection complete all as specified.

S&F in repairs Vitreous China wash basin, angle back, size 550x400mm white, excluding taps, waste pipe, chain and plug and porcelain stopper but including brackets complete all as specified.

S&F vitreous china wash down water closet pan (Padestal pattern) white incl plastic water closet seat covers white closed pattern with flat bottom with mild steel chromium plated hinging device complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts, of 450 mm length complete all as specified.

Taking down AC/Salt glazed ware / PVC pipes including fittings upto 110mm dia and removing from site complete all as specified.

S&F in repairs for 100mm bore dia pipe Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof complete all as specified and directed.

S&F PVC (SWR) pipes of 110 mm dia, single socketed fixed to walls complete all as specified and directed.

S&F PVC (SWR) pipes of 75 mm dia, single socketed fixed to walls complete all as specified and directed.

S&F PVC (SWR) bends of 110 mm dia, any radius complete all as specified and directed.

S&F PVC (SWR) bends of 75 mm dia, any radius complete all as specified and directed.

S&F PVC (SWR) junction single Tee equal or unequal 110 mm dia complete all as specified and directed.

S&F PVC (SWR) junction single Tee equal or unequal 75 mm dia complete all as specified and directed.

S&F PVC (SWR) floor trap, plain with grating including jointed with solvent cement of 75 mm outlet dia complete all as specified and directed.

S&F in repairs PVC waste pipe not less than 80cm long with PVC coupler for kitchen sink, WHB, urinal, etc complete all as specified and directed by Engr-in-Charge.

S&F PVC waste pipe not less than 80 cm long with PVC coupler for kitchen sink , WHB , Urinal etc complete all as specified and directed.

S&F in repair stainless steel sink coupling with waste pipe complete all as specified and directed by Engr-in-Charge.

S&F in repair CP steel Grating round with steel frame with hinge 100mm dia all as sample approved by Engr-in-charge.

S&F CP steel Grating round with steel frame with hinge 100mm dia complete all as per sample approved by Engr-in-charge.

S&F in repair aluminum alloy powder coated standard hollow section as mentioned below window frame (Bombay sliding) with two glazed shutter and one nos wire gauged shutter sliding type, with aluminum sections as per Series-A(15mm) 3 track of Jindal section numbers for sliding windows, and glazed with tinted glass coloured glass 4mm thick, fixed with glazing clips, rubber beading / gasket anodised beading, screw and lock type handle of size 75mm, 2 Nos aluminum tower bolt 150mm long etc complete all as specified and directed. Shutter Top & bottom size : 37.50x15x1.60mm Shutter inner lock size 37.50x15x1.60 mm Shutter side (Handle) size 37.50x15x1.36 mm Chowkhat bottom size : 50.30x26x1.20mm Chowkhat top & sides size: 50.30x26x1.00mm Make: (i) Anodised aluminum section : Jindal / Hindalko / Indalco. (ii) Particle board: Navipan / Puratuff / Kitlam (iii) Glass: Saint gobain / Modi guard / Tata

S&F anodised aluminium powder coated window and ventilator shutter sliding type without sash bar , aluminium section weighing 0.55 Kg/Mtr including necessary jointing cleat glazing clips rubber packing anodised aluminium snap beading screws atc complete all as specified and directed.

S&F powder coated aluminium grill with mesh size 75 mm and aluminium bar 6 mm XPM type including all accessories such as channels for fixing grill screws etc. aluminium section 15 micron thick anodizing complete all as specified and directed including taking down old grill and removing from site.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and rubbish off the primeses complete all as specified.

M&L 75mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar work/places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and fair without using extra cement and demolition of existing old cement concrete of plinth protection in ground floor and paving below or above ground level complete.

M&L for 75 mm thick cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in floor , sub base etc complete all as specified and directed

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified

M&L for 60 mm thick pre polished rubber moulded coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-35 Grade with grey cement and no pigment complete all as specified and directed by the Engr-in-Charge.

M&L for pre-polished pavement coloured chequred tiles glossy finish of size not less than 300 x 300 x 20-22mm thick with anti skid properties laid over 20 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.

M&L heavy duty endura ceramic coloured Parking tiles 10 mm thick dark shade (square/rectangular) polished,area of each tiles not exceeding 0.36 sqm, in floor etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 including dismantling of existing floor tiling with cement mortar bedding (but not backing) and rubbish off the premises complete.

M&L for two coat of synthetic enamel paint over a coat of red oxide primer including preparation on new steel surfaces of any description over 10 cm width or girth complete all as specified.

M&L for Preparation of old Steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as spd and directed

S&F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410-W(Gde E-250) quality-A complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof ridge /covering/ cladding to wall, fixed with self tapping screws as specified.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified

Providing & fixing false ceiling of Designer tile Ivory painted (High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or electra) in true horizental level, suspended on inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grms, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and croos 'T' of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600mm and secondary cross "T" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable wire of 4mm dia with galvanised butterfly level clips, spaced at 1200mm c/c along main 'T', bottom exposed width of 15mm of all 'T'' sections of 2mm dia GI wire shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5mm width, at all heights as per direction of Engineer-in-Charge.

M&L for false ceiling made out of E-board classic of size 600x600x4mm thick, GI frame consisting of main Tee of size 38.50x24.00 mm and cross Tee of size 28.50x24.00mm thick made out of PGI sheet 0.30mm thick doubled at web and single at flange, flange covered with powder coated sheet 0.25mm thick and angle 24.00x24.00x0.4mm thick powder coated suspended with GI wire 3mm dia and up to 2mtr long complete including pluging fixing of angle to brick walls with steel rawl plugs @450mm c/c and aplying two coats of oil bound distemper to the ceiling board complete all as specified and directed by Engr-in-Charge.

S&F in repair 18/19mm WPC board, medium density,flat pressed,single/three layers type,BWR grade , fixed with screws to timber frame work ,complete all as specified

S&F magnet catcher for cub board with brass body and striking plate including letting in and fixed complete all as specified and directed.

S&F 100mm size solid in one piece stainless steel handles 304 grade bright finish , fixed with stainless steel screws for kitchen cabinet shutter, complete all as specified and directed by Engr-in-Charge.

S&F stainless steel CP semi hydraulic albeheri hinges and fixed with stainless steel screws as per sample kept in AGE B&R office, complete all as specified and directed by Engr-in-Charge.

S&F stainless steel auto closing 35 mm of o crank(KH-002) openable at 110 degree for kitchen cabinet shutters complete all as specified. Make :Hexa/ Hettich/ Hafele

S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs , complete all as specified and directed. Make :Hexa/ Hettich/ Hafele

S&F in repair chrome plated stainless steel wire basket (storage basket) pull out type for large utensils of size 480 x 500 x 150 mm of grade 304 with necessary fixing clips etc. complete all as specified and as directed. Make : Hettich, Hafele, Butterfly

S&F in repair chrome plated stainless steel wire basket (plate basket) pull out type for large utensils of size 380 x 500 x 100 mm of grade 304 with necessary fixing clips etc. complete all as specified and as directed. Make : Hettich, Hafele, Butterfly

S&F in repair chrome plated stainless steel wire basket (cup and saucer basket) pull out type for large utensils of size 380 x 500 x 100 mm of grade 304 with necessary fixing clips etc. complete all as specified and as directed. Make : Hettich, Hafele, Butterfly

S&F in repair chrome plated stainless steel wire basket (cutlery basket) pull out type for large utensils of size 380 x 500 x 100 mm of grade 304 with necessary fixing clips etc. complete all as specified and as directed. Make : Hettich, Hafele, Butterfly

S&F in repair chrome plated stainless steel wire basket (grain trolly basket) pull out type for large utensils of size 480 x 500 x 200 mm of grade 304 with necessary fixing clips etc. complete all as specified and as directed. Make : Hettich, Hafele, Butterfly

S&F in repair chrome plated stainless steel wire basket (bottle pull out basket) pull out type for large utensils of size 120 x 500 x 432 mm of grade 304 with necessary fixing clips etc. complete all as specified and as directed. Make : Hettich, Hafele, Butterfly

S & F in repair vitreous china squatting pan “ORISSA PATERN” of size 580 mm x 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete.

S&F PVC Low level flushing cistern 8 ltr capacity dual type incl internal fittings,sypons,handle,bend etc complete incl supply and fixing 2 Nos CI brackets complete all as specified and directed by Engineer-in-Charge.

S & F in repair 10 litres capacity PVC low level valve less symphonic action type flushing cistern white with inlet, float valve, float and handle including brackets with 32 mm dia PVC pipe 600 mm long complete all as specified and as directed by Engr-in-Charge.

S&F Vitreous China wash hand basin, white, oval type counter top of size 550mm x 400 mm fixed on and including cast iron cantilever bracket, 32 mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of tap, waste fitting etc complete. Note: Pillar tap shall be measured as supply only under respective item.

S & F wash hand basin vitreous china white glazed flat back, size 550 x 400 mm, including pedestal, CP waste coupling and waste pipe brackets and cutting for and pinning in ends of brackets and etc complete in all respect complete all as specified and directed by Engineer-in-Charge.

S&F of Textured Foam Wallpaper Roll of any size and 2-3 mm thick as directed and specified in manufacturer instructions.

M&L anti skid staricase tile of any size (250 X 1200mm / 300 X 1200mm / 200 X 1200 mm) over and including 10 mm thick rendering/ screed in CM 1:4 complete as directed and specified by Engr-in-Charge.

M&L for stainless steel (Grade 304) railing made of hollow tubes, channels, plates, etc., including welding, grinding, buffing, polishing and making curvature (whre ever required) and fittings the same with necessay stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasterners, satinless steel bolts etc., of required size, on the top of floor or the sid eof waist slab with suitable arrangement complete all as specified and directed.

Surface dressing n exc 15 cm deep in any type of soil and getting out complete all as specified and directed by Engineer-in-Charge .

Excavation in trenches, n exc 1.5 mtr wide and n exc 1.5 mtr in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. n exc 10 Sqm on plan and n exc 1.5 mtr in depth and getting out in any type of soil complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and as directed.

M&L for 75 mm thick Cement concrete in 1:2:4 type B-1 using 20 mm graded stone aggregate in floor etc and finished the top surface of concrete by brooming complete all as specified and directed.

Excavating in post holes (or similar holes) each n.exc 0.5cu m, getting out,returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding, 25cm watering if reqd and removing surplus soil to a distance n exc 50m and making good surface in any type of soil complete all as specified and as directed by the Engr-in-Charge.

S&F mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St. 240 as in frame work for sun shade, roof projection etc. complete all as specified and directed.

Returning filling in soil including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick complete all as specified and as directed.

Removal of excavated soil n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.

M&L Plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete, complete all as specified and directed.

M&L for three coats of white wash on newly plastered surfaces of walls including preparation of surfaces complete all as specified and ditected.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint over a coat of suitable primer of approved shade on walls complete all as specified & directed by Engineer-in-Charge.

M&L Hardcore of broken stone/ boulder aggregate of gauge exc 40mm but n exc 63mm deposited, spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and directed.

M&L hardcore of broken stone / boulder of gauge exc 63 mm but n.exc 100 mm deposited, spread and leveled in layers n.exc 15 cm thick, watered and rolled/rammed to a true surfaces in broken stone or boulder complete all as specified and as directed.

S&F sheet glass ordinary quality 4mm thick and glazing with oil putty or fixed with bead/ glazing pins in squares n.exc. 0.5 sqm each pane all corner of glass to be fixed with silicon complete all as specified and directed.

S&F Stainless steel wire cloth 0.56mm nominal dia of wire with 304 grade nickle and average width of aperture 1.40mm and fixed with stainless steel wire staples all as directed by Engineer- in -Charge.

Supply only Liquid water proofing compound as per manufacturer instructions complete all as specified.

S&F PVC Jet spray for EWC with 1 mtr long PVC pipe with fitting complete all as specified and as per approved sample with Engr-in-Charge.

S&F fancy type 5.50mm thick looking mirror with PVC moulding 40mm wide all around with back 5mm thick PVC board of size 450mm x 600mm as approved by Engr-in-Charge.

S & F 15mm bore gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge

Cutting into existing manholes for connecting new drains 150mm dia making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete al as specified and directed.

M&L for 150 mm dia reinforced cement concrete pipes, class NP2, laid and jointed in cement with collar complete all as specified.

M&L for PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in surface channels and drains including moulds if required complete all as specified and directed.

M&L for Cement concrete in 1:3:6 type C-2 ( using 40 mm graded stone aggregate) as in foundations, filling and mass-concrete complete all as specified

M&L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stop ends etc complete all as specified and directed.

M&L for cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps, seismic and othe similar bands, plinth courses, bed plates, copings, kneelers, apex stones, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork all as directed by Engineer-in-charge.

M&L 60mm thick for reinforced precast cement concrete 1:1:2 with 1.25mm thick MS sheet painted with bituminous paint around the manhole cover (using 20mm graded stone aggregate) as in landings, cover slabs ( for manholes etc.) vibromatic, articles with plain faces including necessary form work using surface vibrator, complete CA No and date of casting to be engraved on the cover slab by stencil and curing will be done in the water resverior complete all as specified and directed. (Note - Reinforcement shall be measured and paid for separately under respective item of schedule 'A').

Provn of 50 users septic tanks including excavation and earthwork in any type of soil , PCC foundation, brick work, RCC cover slab, precast RCC man hole cover with angle iron frame vent shaft and sludge chambers complete all as shown on TD drawing, specified and directed.

Taking down carefully existing aluminium/copper point wiring on batten or in PVC conduit or in MS conduit with GI earth wire etc ( light, fan, socket, or power and switch, socket, regulator, holders, ceiling roses) complete and making good the disturbed surfaces of walls, Floors, ceilings etc to match with existing all as specified and directed.

M & L for point wiring complete with PVC insulated and unsheathed, FRLS 1100 volt grade electric cable of size 1.5 sqmm with multi stranded copper conductor single core in and including rigid PVC surface conduit not less than 19 mm dia, clip, complete with all accessories such as socket, elbow, junction box, bell mouth, bend, reducer etc including MS Box of thickness1.2mm for mounting of switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet as top cover, and one run 1.5 Sqmm. (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable green colour as earth wire upto common earth and connected to earth dolly complete all as specified including lugs required for One light/fan point controlled by one switch , complete all as specified and directed. Note: The wiring to be done as per IE rule and maintain colour code accordingly.

All as per item No 172 here-in-before but for one 5 pin 5 Amp socket outlet point on same board complete all as specified and directed.

All as per item No 172 here-in-before but for one 5 pin 5 Amp socket outlet point on independent board complete all as specified and directed.

All as per item No 172 here in before but with 4 Sqmm copper conductor cables (multistranded) PVC insulated FRLS, for one 6 pin 15 Amp socket outlet point on independent board

M&L for point wiring with 1.5 Sqmm. (nominal area) FRLS, single core PVC insulated 1100 Volts, grade multistranded copper conductor unsheathed in and including concealed PVC conduit medium duty 20/25 mm dia or higher and heavy grade conduit fittings and heavy duty accessories with suitable size of sunk type cast iron or pressed steel terminal box 1.6mm thick for mounting of switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet as top cover, one green colour FRLS cable of same size as earth wire up to common earth and connected to earth dolly compete all as specified and directed by Eng.-in-charge of following. Note: The wiring to be done as per IE rule and maintain colour code accordingly.

One light point point /bell buzzer point controlled by one-one way switch.

One ceiling fan/Exhaust fan point controlled by one-one way switch through Regulator.

One three pin 5 Amp socket on same board with other switches.

One three pin 5 Amp socket on independent board

S&F bell push 5 Amps, single pole complete all as specified and directed.

S&F electric bell, AC 230V, single pole complete all as specified and as directed.

S&F switch piano flush type single pole, 5 Amps, one way complete all as per specified & directed.

S&F switch piano flush button type 15 Amps SP 250 V AC complete all as specified & directed.

S&F switch piano flush type single pole, 20 Amps, one way all as per specified & directed.

S&F socket outlet 6 Amps, 5 pin, 2 in 1 complete all as specified and directed

S&F socket outlet multipurpose 3 Pin 5 Amp and 2 Pin 5 Amps 250 V AC complete all as specified & directed.

S&F socket outlet multipurpose 5 and 15 Amps, 5 pin, 2 in 1 complete all as specified & directed

S&F switch socket combination 5 Amps, 5 pin, 2 in 1 complete all as specified and directed

S&F switch socket combination multipurpose 5 & 15 Amps, 5 pin, 2 in 1 complete all as specified and directed

M&L for point wiring with 1.5 Sqmm. (nominal area) two single core PVC insulated unsheathed multi stranded copper conductor cable 1100 volts grade, FRLS grade in and including medium duty concealed PVC conduit 20 mm dia or higher and conduit fittings and all accessories with including contineous earth wire PVC insulated, unsheathed, multi stranded copper conductor cable 1.5 sqmm (nominal area) FRLS grade, green colour, up to common earth and connected to earth dolly compete all as specified and directed by Eng.-in-charge for light/fan socket point controlled by modular switches/socket of following. (Note: Colour code shall be maintained as per IE rule GI sunken box for modular switches/sockets and cover plate shall be measured and paid separately)

One light point point controlled by one-one way switch.

One ceiling fan controlled by one-one way switch through Regulator.

One Exhaust fan point controlled by one-one way switch

One Calling Bell controlled by one-one way Bell Push

One three pin 5 Amp socket on same board with other switches.

One three pin 5 Amp socket on independent board.

All as per item No 187 here in before, but wiring with 4 Sqmm. (nominal area) wire/cable for one 3 Pin 15 amp socket on independent board complete all specified.

S & F Modular Fan Regulator electronic rotary,0-4 steps step type 100 Watt, 240 Volt 50 Hz hum free 2 module complete all as specified and directed.

S&F Supply and fixing switch modular 6 Amps 230 Volts one way switch complete all as specified and directed.

S&F Socket modular 6 Amps AC 230 Volts 2/3 pin combined 2 modular type complete all as specified and as directed

S&F Socket 6A/16 Amps-2/3 pin combined AC 230 Volts modular type complete all as specified and as directed.

S&F Switch modular type AC 230 volts 16 Amps one way complete all as specified & as directed.

S&F moduler bell push 6 Amp one module one way complete all as specified.

S&F GI sunken box with flush metal GI box 1 module suitable for modular switches incl plastering, making good disturbed surfaces of wall, painting to match the existing finishes complete all as directed.

All as per item no 195 here in above but 2 module.

All as per item no 195 here in above but 3 module.

All as per item no 195 here in above but 4 module.

All as per item no 195 here in above but 6 module.

All as per item no 195 here in above but 8 module.

All as per item no 195 here in above but 12 module.

S&F combind cover plate white 1 module suitable for modular switches complete all as specified and directed.

All as per item no 202 here in above but 2 module

All as per item no 202 here in above but 3 module

All as per item no 202 here in above but 4 module

All as per item no 202 here in above but 6 module

All as per item no 202 here in above but 8 module

All as per item no 202 here in above but 12 module.

S&F ceiling rose surface bakelite 3 terminals of size 65x25mm 250 V AC complete all as specified and directed

S&F step type, electronic fan regulator 120 watts, 5 step for ceiling fan 1200/1400 mm sweep 230 volts AC complete all as specified and directed

S&F in replacement, wall mounted tube light fitting 1x20/22 watts extruded aluminium polycarbonate covers PF 0.9 and above operating voltage 140V-270V colour temp 4000K/6500K & lumen input output 95 Lumen per watt and connected to ceiling rose with required length of two core flexible copper cable 23/0.0076 fixed on wall/roof complete all as specified and directed. Make:Wipro Cat part No LL20-281-XXX-65AL1/ Philips cat part No BN021C LED20S PSU CWGR S2/Havells Cat No ENDURA LINEARNEOBS20W LED865SPCWH.

S&F wall mounted LED tube light fitting 1x20/22 watts extruded aluminium polycarbonate covers PF 0.9 and above operating voltage 140V-270V colour temp 6500K & lumen input output 95 Lumen per watt and connected to ceiling rose with required length of two core flexible copper cable 23/0.0076 fixed on wall/roof complete all as specified and directed. Make: Philips cat part No TMC 501P1xT LED 22WP-3241(Tube Batten) and MAS LE$D 1200mm 18W-865-T-81 (Tube) / Wipro Cat part No WI0922208 (Tube Batten) LL13-181-65SE (Tube)/ Havells Cat Part No LUMILINEPLUSBS20WLED865SPCSS (Tube Batten)CRYSTAL1213T8DSTL20WLED865SGLASS(TUBE DOUBLE SIDE)

S&F in replacement of energy saving ,surface mounted, LED 10 watt Bulk head luminaire with decorative oval diffuser comprrising of high brightness LEDs complete all as specified and directed by Engr-in-charge. Make : CG cat LBHP-10-CDL/Philips WT140W LED7S CW PSU S1 PC/Havells ENDURA RUGBYNEO N /Mepro cat no BCL 23 Plain

S&F Decorative, wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22 base LED Lamp/1 N x 7.5 W LED filament lamp complete all as specified and directed. Make : Havells Cat part No LHFOAJE1TZ1I060 1 N x 9 W or equivalent in Philips/ Wipro /CG / Eveready

S&F LED Mirror light small 2 feet fitting alluminium extruded body with intergrated electronic driver along with fixture, 10 W complete all as specified and directed.

S&F mirror light decorative compact luminarious with decorative ends caps 9/10 Watt LED with all accessories and including connecting up with three core flexible copper conductor cable of suitable size . Make Havells Cat No Edgelite or equilent in Philips/Wipro/ Eveready/ CG

S&F in replacement surface mounted LED 600x600mm fitting made of CRCA powder coated finish with high transmitivity difusser, LED used shall be profi LED & flat diffuser type and capacity 32 wattage or higher wattage, CCT upto 6500K, CRI > 80, PF > 0.95 or higher side including driver minimum internal surge protection 2.5 KV complete all as specrified & directed Make : Philips cat part No SM365C LED32-6500 PSU OD WH/Wipro CRCO10R038HP57GL / Havells PLUTONEO2X2PLR34WLED857S/CG LSTP-45-CDL.

S&F in repair flood light fittings. Energy saving environmental friendly, long life, exclusive innovative epoxy powder coated die-cast aluminium housing IP66 flood light with high power LED's as light sources, suitable for high lighting architectural features or retail spaces as 60 watt or higher size LED , Glass cover complete all as specified and directed.

S&F in replacement BLDC Ceiling Fan complete with electronic type regulator and accessories 230 V,1200 mm sweep. BEE 5 star rated PVC AC single Phase 230 V / 240V 50 Hz of , complete connecting up ceiling rose to connector block of fan including fabricating and fixing of Fan hooks from ceiling truss/angle iron, required length of down rods (Aas per site requirement) and necessary nuts and bolts complete all as specified and directed. Note :- Old fans shouldbe deposited to MES store yard

S&F Exhaust fans Metallic AC single phase 230/ 240 V of size 300 mm sweep,50 Hz with louver of size 300 mm sweep, complete with louvers, shutters and connecting up ceiling rose to connector block of fan including making of holes and grouting of nuts and bolts PCC (1:2:4) B-1 block including taking down old metalic exhaust fan complete all as specified and directed. Note :- Old fans shouldbe deposited to MES store yard

S&F Exhaust fan exhaust fan 150 mm PVC body made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding complete with louvers, shutters and connecting up ceiling rose to connector block of fan including making of holes and grouting of nuts and bolts PCC (1:2:4) B-1 block including taking down old metalic exhaust fan complete all as specified and directed. Note : Old fan should be deposited to MES store.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm, 900 RPM, single phase, 230V AC with louver all as specified and directed 30 mm sheet. including connection with twisted white three core flexible copper multistranded conductor cabl from ceiling rose to connector all a directed by Engineer-in-charge. Make:- Havells cat part No. Ventil Air DXWHT, CG cat No. BRISKAIR, Havells/ Crompton/ Usha.

S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece including fixing arrangements and connecting up including making of holes and grouting of nuts and bolts PCC (1:2:4) B-1 block complete all as specified and directed. (Note - Old Geyser should be deposited to MES store if any)

Supply & fix Wall Fan complete with accessories BEE 5 star rated PVC AC single Phase 230 V / 240V 50 Hz of size 300 mm sweep, and connecting up ceiling rose to connector block of fan including fixing wherever required complete all as specified and directed.

S&F LED Strip SKY Cove 5M (Colour Blue, Red , warm white, green, white) with driver 5 meter 24W output with 20,000 hours Available in 3000K complete all as specified and directed. Test certificate shall be submitted by the contractor to the department.

S&F sheet metal enclosure SPN with a two pin and earth plug and socket complete with one 240 volts 20 amp single pole MCB complete all as specified.

S&F TPN DB VTPN 4 way 415 Volts, 50 Hz indoor type double door Sheet metal enclosure IP-43 DB's flush mounted with 250 Amp Copper busbar for each phase with two neutral bar & two earthbar and cable ties for cable managenment including mounting arrangement for DPX3 MCCB 125 Amps four pole 415 volts as incomer including connection terminal strip complete pre wired with suitable size copper conductor. The DB's should hold type test certificate (CPRI) as per IEC 61439-3 complete all as specified and directed by Engr-in-charge, Make: Indoasian or eqvt in L&T/Schneider

S&F sheet metal enclosures 240 volt with 200 Amp rated bus bar for double door 8 way DB,s IP-43 IK 09 metal door suitable for one MCB SPN as incoming and 06 MCB SP as out going complete all as specified and directed.

S&F MCCB 3 Pole 125 Amp, 25KA thermel magnetic complete all as specified and directed by Engr-in-charge,

S & F sheet metal enclosure TPN for DB's when MCB's to be used 4 way with 200 amps bus bar and double door complete all as specified and directed.

S & F sheet metal enclosure SPN for DB's when MCB's to be used 12 way with 200 amps bus bar and double door complete all as specified and directed.

All as per item no 231 here in above but DB' 8 way

All as per item no 231 here in above but DB 4 way

S&F MCB TPN 63 Amps 10 kA, 430 Volt complete all as specified & directed by Engr-in-Charge.

S&F MCB SPN 240 Volt 10 KA 6 to 40 Amp 'C' series conforming to IS complete all as specified & directed. Make: Legrand cat no 4086 18 or eqvt in L&T/ Schneider.

S&F MCB single pole, 240 volt 10 KA 5-32 Amp 'B' series conforming to ISI marked all as specified and directed.

S&F MCB SP(single pole) 240 volt, 10 KA, 6-40 Amp, 'C' series confirming to IS complete all as specified and directed. Make: Legrand 4085 96 or eqvt in L&T/ Schneider.

S&F MCB double pole 240 Volt 10 KA 40 Amp 'B' series conforming to ISI marked complete all as specified & directed.

M&L in replacement submain wiring with 2 Single core FRLS PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor multistranded of size 4 Sqmm. (nominal area) drawing in and including 20 mm. dia medium duty PVC concealed conduit and conduit accessories and fittings. Including one single core green colour FRLS, PVC. Insulated unsheathed multi stranded copper conductor cable of size 2.5 Sq mm. as earth continuity conductor upto common earth and connected to earth dolly complete all as specified & directed including taking down old one. (Note: Two run 4 Sqmm cable and one run 2.5 Sqmm cable and one run conduit shall be measured as one run.)

All as per item No 239 here in above but with 6 Sqmm (nominal area) drawing in and including 25 mm dia or higher medium duty PVC concealed conduit

M&L sub main wiring with 2 Single core PVC insulated unsheathed FRLS cable 1100 Volts grade heavy duty copper conductor multistranded of size 10 Sq.mm. (nominal area) drawing in and including 20 mm. dia or higher PVC concealed conduit heavy duty accessories and fittings. PVC insulated unsheathed FRLS cable copper conductor multistranded of size 6 Sq. mm. as earth wire upto common earth and connected to earth dolly complete all as specified & directed. (Note: Two run of 10sqmm and one run 6 Sqmm and one run condiut with accessories shall be measured as one run).

S&F in replacement tamper proof electronic single phase with enclosure , whole currrent energy meter (LCD display) 10 Amp to 60 Amp, 240 volt class 1.00 and AC supply including cable connection, proper sealing with barcode with PVC seal. The meter shall comply with the latest version of IS-13779 with at least 2 anti tamper LED indications of line load reversal and earth loading indication including electrical connection with existing system and sealing properly including push fit type transparent meter box. The meter shall work satisfactory with guaranteed accuracy as per limit of IS: 13779. The meter shall be fixed on existing steel boxes on wall complete all as specified and directed. Make:- Secure /L&T/BHEL (Note:- Old u/s meter will be deposited to E/M store yard)

M&L for earthing complete with galvanized iron or steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 Mtrs below ground level) with top edge of earth plate not less than 1.5 Mtrs below ground level connected to galvanized iron strip 32x6 mm by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, including PCC (concrete chamber) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate, with fair finish internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire gauge of (0.68mm) 8 mesh per liner inch, 80 mm thick RCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I and specified including provision of earth wire protected by 40mm dia medium grade GI pipe and watering pipe shall be 20mm bore medium grade GI pipe, and including all excavation and earth work & connecting the earthing to an earthing test point /transformer nuetral/body/ Lt panel etc. and testing on completion, complete all as specified & directed by Engr-in-Charge.

Materials and Labour for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6.0 mm thick buried directly in ground end vertically to a depth not less than 2.25 meter deep below ground level with top edge of the earth plate at a depth not less than 1.5 M below normal ground level connected to galvanized steel earth wire 4 mm dia by means of bolts, nuts check nuts and washers of galvanized steel and connected to main switch board or main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1, cover slab 54 cm x 54 cm x 5 cm reinforced with 8 mm dia. TMT bars @ 150 mm c/c both ways, and with one handle for lifting made out of 10 mm dia MS round bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 15 mm bore galvanized steel tubing (light grade) for protection of earth lead connection, including necessary excavation and earth work in any type of soil and necessary testing complete all as shown on electrical plate No 3 of SSR Part –I (2009) and as directed.

S&F in repair louvers shutters round or squire made out of GI sheet suitable upto 300 mm dia exhaust fan complete incl taking out old louvers shutter complete all as specified and directed.

S&F building security light luminaries with surge protector and photovoltaic/LDR sensor controlled made out of single piece die cast alluminium housing suitable for and including 1x30 Watt LED type complete, pre-wired complete all as specified Make Greenstar/Philips/Wipro/Havells

Supply and Fixing Integral LED Bldg security Light Luminaire comprising of pressure die cast aluminum housing heat resistant toughened glass with frame IP-65 protection road way luminaries with high power LED 40/45 watt with efficiency 100 lumen/watt at system level, CCT>5700K, with average life class 50,000 burning hours, complete all as specified and directed. Make:- Crompton model No. LSTP-45-CDL/Havells model No. ENDURAPEARLNEOSL 40WLED757PASYTOPC /Philips Cat Part No BRP409LED CW036MRFGIPSUGRand syska SSK-ST-40W.

S&F in replacement, Decorative Square/Round surface mounted LED flat panel PDC aluminium housing and PMPA diffuser makes it a robust Luminaire 12 Watts PF 0.9 and above operating voltage 150V-300V colour temp 4000K & lumen input, output 70 Lumen per watt incl provisioning of 3 core white flexible multistranded copper conductor 23/0.0076 from ceiling rose to light connector complete all as specified and directed by Engineer-in-charge

All as per item No 248 here-in-above but light fitting of 15 Watt

Supply, install, testing & Commissioning of Timer switch Timelite-65A 3Pole/230V-Digital Time Switch assembly, complete all as specified and directed

S&F Garden Light fitting, 25 Watt LED Decorative Post top for 360° indirect light with IP 65 protection Resistant to impact and corrosion. Glare-free new generation, post-top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power leds as light source ,including taking down the old one Complete all as specified and as directed. Make :- Havells Part No LHEVBGP7PN6K025 or equivalent in philips, Bajaj, Wipro/ Crompton / Eveready

S&F LED bollard type fitting 10 Watt cpacity 650 mm height, LED bollard AFlare fitted with low glare diffuser with IP 65 protection, complete with necessary pcc foundation including taking down existing old pattern unserviceable light fitting all as specified and directed. Make Crompton Cat Part No.LBSL 1-10-CDL or equivalent in Havells/ Bajaj/Everady

S&F junction box made of glass fibre reinforced and transparent poly carbonate of size 126x228x111, KV PC 8104 with IP 65 protection including MCB SP, 6 Amps 1 No and suitable size clamps fixing for pole/in pcc foundation etc,including taking down the old one,all as specified and as directed.

Supply, laying, jointing and testing of underground XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 Sqmm 2 Core laid in trenches/ducts/along poles/through pipe under road etc with new aluminium lugs of cable size all as specified and directed.

Supplying, laying, jointing and testing LT underground cable, heavy duty cable of size 10 Sqmm 4 Core, 1100 Volts, XLPE insulated and PVC sheathed, armoured, multi-stranded aluminium conductor cable conforming to IS , laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culverts duly protected in galvanised steel pipe of suitable sizes all bare conductor of cable including cable gland and lugs etc at both ends incl disconnecting and taking out unserviceable damaged cable or existing service cable complete all as specified and directed. Note : Excavation, earth work, cable sand cushioning & cable protection shall be measured separately under relevant items of this schedule.

All as per item No 255 here and before but 16 Sq mm,4 core

All as per item No 255 here and before but 25 Sq mm, 4 core

All as per item No 255 here and before but 50 Sq mm, 3.5 core

All as per item No 255 here and before but 95 Sqmm 3.5Core

Supply & Laying well burnt bricks, sub class 'B' brick laid breadth wise, along the cable in trenches after sand cushioning laid for protection of UG cable protection complete all as specified and directed.

M&L for laying local dry clean sand filling for cushioning in trenches around under ground cable complete all as specified and directed.

M&L for laying reinforced precast concrete cable cover, Class LV, Type I, flat, size 250 mm x 150mm x 40mm to U/G cable laid dry flat over the cable with width equal to length of the cable and abutting each other with gap between adjacent slab not exceeding 10mm over under ground cable for cable protection in trenches all as specified and directed by Engineer-in-Charge.

Cutting existing road/hardstand of any type by using crow bar chisel uprto a depthof 30 cm for laying GI pipe including making good the surface by returning filling watering ramming in layers 150 mm thick PCC 1:2:4 over 200 mm thick hard core of broken bricks/stones over returning filling watering ramming in layers not exceeding 25 cm thick complete all as specified and directed by Engineer-in-Charge.

M&L lamp holder insulated body with back plate suitable for angle and batten fitting complete all as specified.

S & F high efficiency LED bulbs 1 X 12 watt that can be used as a ready replacement for existing GLS ad CFL direct fit in holder complete all as specified and directed.

M&L GI bracket made out of 40 mm GI pipe medium grade bend for fabrication to shape as required length of pipe 1.2 mtr with necessary fixing arrangement by means of MS clamps 02 Nos not less than 50x6 mm MS flat duly painted, nuts, bolts and washer complete all as directed. (Make - TATA/JINDAL/Swastik).

Supply and laying galvanised steel tubing 50 mm bore light grade incuding all fittings laid in trenches or fixed to poles/ walls etc for cable protection complete all as specified.

Supply, Laying, fixing & testing galvanished iron water tubing 'medium grade; 20 mm dia with and inclduing all GI fittings such as flanges, unions reducers sockets, socket reducing bends , elbows, tee, checkneuts, caps, plugs etc laid in trenches for the following sizes complete all as specifed and directed. Note: Excavation and earth work shall be measuered and paid seperately under respective item of schedule 'A"

All as per item No. 268 here-in- above but 'medium grade; 25 mm dia with and inclduing all GI fittings such as flanges, unions reducers sockets, socket reducing bends , elbows, tee, checkneuts, caps, plugs etc

All as per item No. 268 here-in- above but 'medium grade; 40 mm dia with and inclduing all GI fittings such as flanges, unions reducers sockets, socket reducing bends , elbows, tee, checkneuts, caps, plugs etc

S&F 20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S & F 25mm bore gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge

S & F 40mm bore gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge

VERDHMAN ASSOCIATES