CONSTRUCTION OF TOILET BLOCK AT HIDIMBA DEVI TEMPLE, MANALI, DISTT. KULLU (H,P.)

Amount

Sub Head and Item of Work

Excavation in foundation, trenches etc. in earth work lift upto 1.50 meter stacking the excavated soil not more then 3 meter clear from the edge of the excavation and then returning the stacked soil in 15cm. Layers when required in to the plinth side of foundation etc. consolidated each deposited layer by remaining and watering and then depositing of all surplus excavated earth as directed with in a lead of 50 meter (including GST)

Providing and laying cement concrete of specified grade excluding the cost of centering and shuttering 1:4:8 ( 1 Cement:4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) (including GST)

Bricks work using 1st class common brunt clay building brick in foundation and plinth in cement mortar 1:6 (1 cement, 6 sand) (including GST)

Half bricks masonary using 1st class common burnt clay building bricks in super structure in cement mortar 1:3 ( 1 Cement: 3 sand) (including GST)

Bricks work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in cement mortar 1:6 (1 cement : 6 coarse sand). (including GST)

Providing and laying damp proof corse 50mm thick with cement concrete 1:2:4 (1cement: 2 sand; 4 graded stone aggregate 20mm nominal size) and curing complete (including GST)

Providing and laying cement concrete in retaining walls , return walls , walls including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. upto to floor five level, excluding the cost of cantering, shuttering and finishing 1:2:4 (1 Cement : 2 coarse sand( zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources). (including GST)

Centring and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform. DSR 2023 5.9.3 (including GST)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing, in position and binding all complete upto plinth level. Cold twisted bars (KG). (including GST)

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete (including GST)

Filling available excavated earth (excluding rocks) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5m. Measurement corrected as required. (including GST)

Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. Complete. (including GST)

Providing and fixing anodized aluminium work for door, window ventilators and partitions with extruded built up standard tubular and other section of approved make conforming t IS 733 and IS 1285 anodized transparent of dyed t required shade according t IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawl plugs and screw or with fixing clips or with expansion filling up of gaps at junction, at top bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth, rust free straight mitred and Jointed mechanically where ever required including cleats angle, aluminium snap beading for glazing/paneing C.P. brass /stainless steel screws. All complete as per architectural drawings and direction of Engineer-in- Charge. for doors windows and ventilators .A. Supply of stainless steel screw 20mm size for hinges for tower bolts, for handles etc. B. Supply and dash hold faster for aluminium door and ventilator frames C. supply and fixing of aluminium work for door, window, ventilators etc (including GST)

Providing and fixing anodized aluminium work for door, window ventilators and partitions with extruded built up standard tubular and other section of approved make conforming t IS 733 and IS 1285 anodized transparent of dyed t required shade according t IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawl plugs and screw or with fixing clips or with expansion filling up of gaps at junction, at top bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth, rust free straight mitred and Jointed mechanically where ever required including cleast angle, aluminium snap beading for glazing/paneing C.P. brass /stainless steel screws. All complete as per architectural drawings and direction of Engineer-in- Charge. for doors windows and ventilators .A. Supply of stainless steel screw 20mm size for hinges for tower bolts, for handles etc. B. Supply and dash hold faster for aluminium door and ventilator frames C. supply and fixing of aluminium hinges 100×45×4 mm for door and ventilators etc.[KG] (including GST)

Glazing with glass panes of 5.5 mm thickness (weight not less than 12.50 kg/sqm) (including GST)

Providing and fixing 12 mm thick pre-laminated board both side bwp phenol bonded exterior/interior grade panelled shutters with frame of first class deodar wood doors including bright finished/black enamelled iron butt hinges with necessary screw 40mm thick frame. (including GST)

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete (including GST)

Providing and fixing 25 mm thick 2nd class deodar wooden plank celing with tongued and grooved jointing and wood -screw (frame work and cover fillets to be measured and paid for separately). (including GST)

ANAND INFRAWORKS PRIVATE LIMITED (BID ID -3247247)

Parveen Kumar Contractor (BID ID -3245509)