CWE BLY/ GE (E) /22 OF 2023-24 CERTAIN REPAIR AND MAINT OF ROADS AND ROADS FURNITURE AT MIL STN SHAJAHANPUR UNDER GE (EAST) BAREILLY

Amount

M&L repair to potholes any depth, not exc 1 Sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths etc cutting around edges to at least 25mm in depth , making good by filling in screened and graded road metal , watering and well ramming (including supply of road metal) by making good by applying tack coat with bituminous primer @ 5 Kg per 10 Sqm, putting in premix as specified for thin bituminous carpet (2 cm thick) well rammed and sealed with premixed sand seal coat (6.8 Kg of binder with 0.06 Cum of sand), again well rammed (including supply of premix binder and sand) depth of potholes n exc 30 mm complete all as specified and directed.

M&L for preparing existing black top surfaces of road by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc. complete all as specified and directed.

M&L for applying evenly a priming / tack coat with bituminous primer @ 5 Kg per 10 Sqm using paving bitumen Grade VG-10 complete all as specified and directed.

M&L for premix bituminous macadam with binder content of 4% by weight of total mix using paving bitumen VG-30 grade , laid /rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) complete all as specified and directed . Note :- (i) Aggregate for Bituminous works shall confirm to clause No 20B 2.5 of SSR 2009 Part I (Specifications).

M&L for bituminous premix asphaltic semi dense concrete 30mm consolidated thickness with 5.5% binder content of paving bitumen (VG-30 grade) by weight of total mix, rolled and compacted , mixed in mechanical hot mixed plant and premixed material, laid with mechanical paver finished including rolling to required camber and gradient complete with 8 to 10 tonne power roller to required compaction complete all as specified and directed. Note :- (i) Design Mix for SDAC shall be carried out through an authorised testing lab and the cost of testing shall be included in the quoted rate. (ii) Aggregate for bituminous works shall confirm to clause No 20B 2.5 of SSR 2009 Part-I (Specifications).

S&F in repair cat eye solar reflective type of metal body alloy of size 100 mm x 100mm x 20mm with PAMA striplens reflector of medel No DA 972.0 fixed with and including MS stud of suitable size as per manufacturers instructions complete all as specified and directed.

Supply and fix in repair solar cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65 mm) of high efficiency Mono crystafie solar panel 2.4V /0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactureres instructions etc all as specified and directed.

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 Sqm , exc 50 mm and n exc 100 mm deep complete.

S&F in repair metal tubular delineator made out of ABS round body fitted with 2 Nos 65mm dia highly reflective reflectors made out of PMMA and mounted on 45/50mm dia mild steel pipe of 1200 mm height duly powder coated and thermoplastic elastomer 3 bands of green, red and yellow reflector radium tape of 25mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150 x 150 x 300 mm) type B1 complete all as specified and directed.

M&L for preparing bituminous surface of road and marking 2.5mm thick centre lines, dashes, arrows letter, marking etc and the like not exc 10 cm wide on new surface or previously treated road surface with hot applied retro-reflective thermoplastic road marking paint (white/golden/yellow) conforming to MORTH (Clause 803.4) all as specified with 8% glass beads using special applicator machine with heating arrangement upto 160% including cleaning and drying the existing road surfaces to ensure dust, oil, grease and moisture free surfaces before applying the paint complete.

M&L for 100mm thick red bajri/ moorum berms, including rolling with power roller complete all as specified and cost of earth will be included in quoted rate also earth will be obtained from out of MoD land complete all as specified and as directed.

M/S Hind Constructions (BID ID -3099212)