Work of Installing a Borewell Motor at the Faiz Park Water Tank at Ankleshwar.

Name Of Work : Work of Installing a Borewell Motor at the Faiz Park Water Tank at Ankleshwar.

Sr.No. Item Description Quantity Total Rate Unit Amount

Drilling 250 mm dia.pilot bore hole in alluvial strata

by dorect rotary rig.

Reaming of 250 mm dia. Pilot bore to 550 mm dia.

Bore hole incl. assembling, lowering, housing,

casing, strainer pipes, gravel packing, clay packing

Manufacture, Supply and Delivery of ISI marked

PVC Casing (Strainer) Pipes of 250 mm dia.

Manufacture, Supply and Delivery of ISI marked

PVC Casing Pipes of 250 mm dia.

5 Supply of Top Cap PVC Size 10" DK 1.00 933.24 No.

6 Supply of Sanku Bottom Cap PVC Size 10" DK 1.00 809.01 No.

Supply of M.S Clamp made from M.S Plate with

holes on either side with nuts & bolts of std make

and suitable size. 900 mm X 100 mm X 16 mm flat

suitable for 250 mm dia. pipe.

Supply of best quality of well sorted sevalia gravel

of size 4 mm 6 mm at site of work.

9 Electro logger charges (with carting) at pilot stage. 1.00 18180.00 Job

Development of bore by Air Compressure having

10 capacity 600 CFM / 150 PSI till sand free discharge 4.00 3931.93 Hour

Conducting Pumping test of 250 mm dia. DR tube

well by submersible pump of up to 30 HP using DG

11 Set of required rating including providing all 1.00 29425.34 Job

required tools/tackles etc. As mentioned below for

all districts. 1st 24 Hours.(up to 30 HP)

Supply of 100mm Dia. of ISI marked Heavy duty GI

12 column pipe as per IS: 1239 part I with latest 90.00 1111.00 R.Mt.

Heavy duty MS coupling (8 mm thickness, 100 mm

13 length, 8 TPI thread (iv) 100 mm dia. 8 mm thick, 30.00 365.87 No.

150mm long as per IS)

Supplying and erecting and commissioning 3 Phase

Borewell Submersible Pump Set capable of

discharging 135lit / minute against a total head of

120 M driven by electrical motor as specified after

14 reaching exact depth of bore with tools, lubricator 1.00 21990.73 No.

etc. comp.as directed (Electric motor driven

borewell submersible pump set confirming to IS

8034 and motor confirming to IS 9283 working at

phase 400 / 440 volt 50 Hz AC supply & 2900 RPM.)

Sr.No. Item Description Quantity Total Rate Unit Amount

Providing and erecting XLPE (IS:7098)(I)-88 ISI

armoured cable multistrand / Solid Aluminium

15 conductor for 1.1 KV. to be laid on wall with 200.00 140.39 R.Mt.

necessary clamps or in existing trench / pipe of

following size of cables (C) 4 core 10 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Aluminium conductor

16 for 1.1 KV. to be laid on wall with necessary 15.00 131.30 R.Mt.

clamps or in existing trench / pipe of following size

of cables. (D) 3 core 10 Sq. mm

Providing & laying approved make Double walled

corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same material

at required depth in existing trench for laying of

cable. below ground / road surface for enclosing

cable (A)50and,

Providing mmfixing

dia duty flange type brass

cable gland with rubber ring for PVC insulated

18 armoured cable complete with out going tails, 8.00 38.38 No.

insulating tape etc for following size of cables. (C)

to 4 core 10 Sq. mm

Solder less crimping type Aluminium lugs

conforming to IS suitable for cable of following size

19 evenly crimped with high pressure tool & 32.00 13.13 No.

connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

manner.(B) 10 Sq.mm

Sr.No. Item Description Quantity Total Rate Unit Amount

Supplying & erecting IP 55 grade following size

section pillar fabricated from joint less M.S. Sheet

with angle iron legs made from jointless M.S. Angle

with cable clamps to be buried in ground to have

appropriate erection to work uniform until erected

with cement concrete foundation and 45 cm high

bricks work finishing with plaster etc. hinged

double door internally supported on both side,

'with internal and outside looking arrangement

20 with look and keys in duplicate 35 x 35 x 5 mm M.S. 1.00 1884.66 No.

Angle of Two Nos. one is welded and other with nut

and bolt for erecting Bakelite sheet. Painting the

Section Pillar inside and out side with three tank

powder coated paint. section pillar roof should be

without joint with water leakage proof & tested as

per IP 55 test & followed by IS 2147 of 1962 (C)

X 30 X 45 cm section pillar fabricated from

Gauge MS Sheet with angle iron legs 45 cm long

made from 35 X 35 X 5 mm thick MS angle.

Providing & erecting 415 V MCB Four Pole for

Motor & Inductive Load (C Curve) having 10KA

breaking capacity & confirms to IS :8828 in existing

box having following capacity (c)63 Amp. Cat-III

Providing & erecting 415 V MCB three Pole for

Motor & Inductive Load (C Curve) having 10KA

breaking capacity & confirms to IS :8828 in existing

box having following capacity (b)40 Amp. Cat.III

Providing & erecting 415 V MCB three Pole for

Motor & Inductive Load (C Curve) having 10KA

23 breaking capacity & confirms to IS :8828 in existing 1.00 587.82 No.

box having following capacity (a) 6 to 32 Amp.

I / we agree to carry out the above work at __________% above the estimated rate put to tender

I / we agree to carry out the above work at __________% below the estimated rate put to tender.

Estimated amount Estimated amount

Put to tender Rs. 6,26,361.00 Put to tender Rs.

Sr.No. Item Description Quantity Total Rate Unit Amount

Net amount Rs.___________________ Net amount Rs.______________________

Contractor Sign With Seal Ankleshwar Nagar Palika