SPL REPAIR TO BLDG NO T-17, T-15, T-39 AND T-41 AT BEG AND CENTRE ROORKEE AND SPL REPAIR OF BATHROOM OF BLDG NO P-904 AT NO 2 TRG BN UNDER GE ROORKEE

Amount

Demolition of brick work or stone / boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed .

Material and labour for brick work built in CM (1:6) straight or curved on plan exceeding 6 metre mean radius using sub class ‘B’ bricks (Old size bricks) complete all as specified and as directed.

Ditto all as above but except brick

Taking down cement or cement lime plaster on brick or stone walls etc including racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar (1:6) using coarse sand on fair faces of brick work of concrete surfaces of walls, finished even and smooth (without using extra cement) complete all as specified and directed.

M & L for 15 mm thick rendering on wall/concrete surface with cement mortar (1:4) finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for rendering 10 mm thick in cement (1:3) on fair faces of concrete as in ceiling, finished even and smooth without using extra cement including taking out cement plaster from ceiling surfaces complete all as specified and directed.

S&F GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste complete all as specified and as directedd.

M&L applying two coat OBD including primer on wall surface all as specified and directed.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces of wall/ceiling of projection/ chajja all as specified and prescribed by manufacture of paint as directed.

M&L for preparation of old decorated wall surfaces by complete removal of exisitng treatment on walls including cornices by broming down with steel brush, scrapping down smoke soot, moulds moss and efflorescent salts and trading oil and grease spots and applying one coat of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489 2004 alkali & fungal resistance dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/10sqm over and including priming coat of exterior primer applied @ 0.90 litre/10Sqm over new surface of wall/ceiling of projection/ chajja, of approved make all as specified and prescribed by manufacture of paint and as directed.

M/L for three coat of white wash on new surfaces of wall including all prereration complete all as specified & directed

M/L for three coat of white wash on new surfaces of ceiling including all prereration complete all as specified & directed

M&L for preparation of old decorated surfaces (plastered/ un-plastered) of ceiling incl cornices by brooming down with steel brush, scrapping down smoke soot, moulds, moos and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on ceiling complete all as specified and directed.

M&L for preparation of old decorated wall surfaces including cornices by broming down with steel brush, scrapping down smoke soot, moulds moss and efflorescent salts and trading oil and grease spots and applying one coat of distemper oil bond emulsion by using rollers complete all as specified and directed.

Taking down old U/S wooden /steel chowkhat with shutter nexc 1.50 sqm each and removing from site.

All as per item above but exc 1.5 and nexc 4 sqm

Taking down shutter from the frame of any discription n exe 2 sqm each and refixing in same opening in same openinig and necessary repair complete all as specified and directed.

M&L for factory made Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, tower bolt complete with glazing bars, dovetailed or welded including soap coat complete all as specified and directed.

M&L for Steel ventileter with top hung shutters including projecting type hinges with MS handle, and MS peg stay, including tower bolt complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F framed work such as grills gratings, etc with ends of bars shouldered and/ or riveted or forged into spikes, framed guard bars barred iron doors, door chowkat, ladders, framed balusters, walk ways, railings; framework of water tanks, hold fast, sheet and similar work conforming to Fe-410-0 or Fe 310-0

M&L for Solid PVC Door Frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, in opening as per specification of drawing complete all as specified and directed.

M&L for Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification of drawing complete all as specified and directed

S&F PTMT Butt hinges 100 mm make Prayag complete all as specified and directed

S&F 150 mm long PTMT tower bolt of complete fixing to door complete all as specified and directed

S&F 150 mm long PTMT handle bolt of complete fixing to door complete all as specified and directed

S&F 300mm long Aluminium sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with beads in square n.exc. 0.5 sqm in each pane complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplesor MS beads size 2mm to 3mm complete all as specified and directed.

Cutting holes in brick walls (exc half brick but n. exc one brick) in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required all as specified and as directed.

S&F 1.25 mm thick mild steel plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams including bending or turning up complete all as specified and directed .

M&L Preparing New steel surface of any description over 10 cm width girth not otherwise describe and applying two coat of synthethic enamel paint over a coat of red oxide complete all as specified and directed.

Demolition of concrete of any description in any position all as directed by Engineer-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. all as specified and as directed by engineer in charge.

M&L for 75 mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in floor, hard standing, plinth protection etc finished even and smooth without using extra cement laid in alternate bays n'exc 2.50 sqm and joints filled with mastic filling complete all as specified and directed.

M&L coloured non skid tile 7 to 8mm thick (square/ rectangular) area of each tiles exc.o.06 sqm n exc.,18 sqm in floor etc. set and jointed with neat cement slurry and pointed in colur cement to match including 15 mm thick screed bed in cm (1:6) complete all as specified and directed.

M&L glazed ceramic tiles 450x350x/6or7/350x250x7mm thick coloured tiles on walls such as skirting and dado and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick in cm (1:4) backing coat complete all as specified and directed.

M&L PCC 1:4:8 type D-2 (40mm crushed stone aggt)as in foundation , flooring sub base, mass concrete complete all as specified and directed

M&L for 18 to 20mm thick granite stone as in platforms / counter slab/flooring and laid in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including taking down old stone slab complete all as specified and directed.

M&L 25 mm thick PCC (1:2:4) Type B-1 20 mm stone aggt as in sub floor/roof/chajja complete all as specified and directed.

M&L Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

Dismantling of floor of WC and bath not exc 600mm deep and removing out the cinder/concrete from sunken portion, cleaning of RCC surface to remove dust, loose particle with compressed air or any other suitable method depending on site conditions, grinding any sharp edges etc complete all as specified and directed.(b) M&L for a glass fiber reinforced acrylic modified cementitious coating system with base coat @ 1.50 Kg/Sqm glass fiber reinforcement and top coat with Sika Top® Seal-107 @ 1.50 Kg/Sqm or equivalent of Fosroc or MC Bauchemie India Pvt Ltd.(c) M&L for protection plaster 15mm thick on cement mortar (1:3) admixed with appropriate integral water proofing compound.(d) M&L for providing 25mm dia GI pipe spout projecting at least 150mm beyond outer face of wall.(e) M&L for sunken portion filled with 40 mm graded brick bats and finished with 50 mm thick PCC 1:2:4 type B1 all as specified and directed.(f) The area for payment measure net floor area.

Dismantling cast iron work of any description or position complete all as specified and directed.

S&F 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

ditto but fixed in wall 110 mm

S&F 75 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed .

ditto but fixed in wall 75 mm

S& F PVC SWR bends any radius 75mm dia with access door or without access door complete all as specified and directed.

S& F PVC SWR bends any radius 110 mm dia with access door or without access door complete all as specified and directed.

S& F PVC (SWR) junction single, (Single T) equal or unequal 75mm dia with access door or without access door complete all as specified and directed.

S& F PVC (SWR) junction single, (Single T) equal or unequal 110 mm dia with access door or without access door complete all as specified and directed.

S&F PVC SWR vent cowl 110 mmn dia complete all as specified and directed.

S&F for 100/75mm bore pipes stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall etc; complete all as specified.

S&F 110/75 mm PVC (SWR) couplers complete all as specified and directed.

S&F 110 mm PVC (SWR) junction double, (double T), equal or unequal complete all as specified and directed.

S&F in repair GI tubing 15 mm bore, medium grade with all fitting and concealed to wall ceiling or laid in floor complete all as specified and directed.

Ditto all as per above but 20 mm bore

Ditto all as per above but 25 mm bore

S&F for 2000 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) ISI Mark hoisted and fixed in position including all fitting nipple complete all as specified in SSR Pt-I.

S&F 25 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair WC vitreous china, squatting pan orissa patern size 580x440mm white with intergral foot rest & P or S trap, flush pipe complete excluding cistern complete all as specified.

S&F in repair WC vitreous china, (pedestal patern) white (excluding flushing cistern and flush pipes) including seat cover fixing bolt & P or S trap, flushing complete all as specified.and directed

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repair PVC valveless, syphonic action type flushing cistern low level white with inlet ball valve, float and handle incl brackets and connections to pipes of capacity 10 lts complete all as spepciified and directed.

S&F stop cock/angle valve 15 mm nominal bore brass chromium plated fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair CP shower rose with or without swivel joints of 15 mm size complete all as specified and directed

M&L 75 mm dia PVC (SWR) floor trap with grating including jointing with solvent cement joint complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repair CP fancy type bib tap cast copper alloy with crutch or butter fly handle (Long Body), screwed down screwed for iron pipe 15 mm bore of tubing complete all as specified and directed

S&Fin repair Vitreous China wash basin oval type white size 580 x 450mm excluding taps waste, chain and plug, but fixed waste pipe complete all as specified and directed.

S&F for 32mm PVC waste pipe for flushing cistern complete all as specified and directed.

S&F 25 mm bore Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed with all necessary fitting and fixer reducer elbow etc complete all as specified and directed.

S&F in repair 15 mm bore cast copper alloy stop valve, fancy type chromimum plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butter fly screwed both ends for iron pipr or union and fixed complete all as specified and directed.

S&F in repair 15 mm Fancy type pillar tap cast copper alloy with capstan head chromumum plated screwed down high pressure with or without lettered hot or cold with long screwed shank and fly nut screwed for iron pipe fixed complete all as specified and directed

S&F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe vitreous china urinal bowl type white fixing plugs bedding urinal against wall in cement mortar 1:2 securing to plug with and including 60 mm long brass screws urinal spreader of PTMT any color fixing with 15 mm dia pipe PVC pointing aroung urinal back in cement complete all as specified and directed

S&F Towel Ring of CP fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) all as specified and as directed.

S&F in repair Tubular towel rail, 20mm dia, D type, 60cm long between flanges including brackets all as specified and as directed by engineer in charge.

S&F in repair Stainless steel cromium plated Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified and as directed.

M&L for TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

Ditto all as per item above but 6 to 10mm dia as in stripps.

M&L for providing precast cement concrete (1:2:4) of 20 mm gragaded stone aggregate in landings, cover slabs (for man holes etc) chullah hoods chajja water trough shelves and similars articles with plain face including demolition of RCC slab any type complete all as specified and directed.

Demolition of concrete (Un-reinforced) including kota stone slabs etc in ground floor and paving etc n'exec 15 cm Thick below or above GL complete all as specified and directed.

M&L for 75mm thick PCC (1:4:8) type D-2 (using 40 mm graded aggregate) as in sub base of floors complete all as specified and directed.

M&L for 40mm thick PCC (1:2:4) type B-1 (using 20 mm graded aggregate) as in floor etc laid in alternate bay n exc 3.sqm, finished even and smooth without using extra cement.

Supply of 28mm wide glass dividing strips, 3mm thick, inserted in position, conform to design complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded aggregate) as in coping/ kerbs/stops rounded or chamfered on edges etc complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60, with grey cement and pigment, in 25mm thick sand for cushion complete all as specified and directed.

M&L for Reinforced cement concrete (1:2:4) ty B-1 using 20mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.

S & F in repair of 3 mm thick plain, ordinary quality sheet glass and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 sqm in each pane complete all as specified and directed.

S&F pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and PCC (1:2:4) Ty B-0 (12.50mm graded stone aggregate) filling in frame complete all as specified and directed.

S&F 30mm Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed

M&L for preparation of wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L for rendering 15mm thick consisting of two coats, top layer 5 mm thick in CM 1:4 (mixed with WPC) over 10mm th layer in CM 1:6, on fair faces of brick work (WPC shall be measured & paid separately) finished even & fair complete all as specified and directed .

Supply only Liquid water proofing compound ISI marked complete all as specified and directed

M & L for preparation of newly plastered surfaces of walls and applying two coat of cement base paint over a coat of alkali resistant priming paint complete all as specified and directed.

M&L preparation of newly plastered surfaces of walls applying with 2 coat of colour wash, complete all as specified and directed.

M & L for preparation of old surface of wall including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of cement base paint complete all as specified and directed.

M & L for preparation of old surface of wall including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying colour wash complete all as specified and directed.

M&L for preparation of previously treated wooden surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

Dismantling framed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed.

M&L for MS Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and, fixed with angle cleats or other connecting plates, including necessary welding or fixing with bolts of Fe 410-W (Gde-E- 250) quality-A

Taking down asbestos, GI (corrugated, semi-corrugated etc) sheets in roof covering any position complete all as specified and directed

M&L Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, including necessary cutting chases to bk work and making good by filling the PCC (1:2:4) between the gap of roof sheet and wall, complete all as spfd & directed.

M&L Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as spfd & directed.

S&F for 300mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as spfd & directed.

S&F 200mm long mild steel, semi-barrel tower bolt, open cover, with sheet pressed barrel, stove enamelled black with bright bolt and fixed complete all as spfd & directed.

M&L for preparation of old painted steel and iron surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutter from the frame) not exc 1.5 sqm each including necessary cutting holes and making good using PCC (1:2:4) Ty B-0 complete all as specified and directed.

Taking down chowkhats or frames with shutter (without taking off shutter from the frame) exc 1.5sqm but n'exc 4 sqm each including necessary cutting holes and making good using PCC (1:2:4) Ty B-0 complete all as specified and directed.

S&F 150mm long mild steel pressed handles, oval type, stove enameled black complete all as specified and directed.

S&F 100mm long Butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and directed.

M&L for factory made steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay, tower bolt complete with gauzed bars, dovetailed or welded including soap coat complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete incl fixtures and fittings suze as swithes, ceiling rose, pendant, regulator, sockets, light fitting etc. removing materials for taking credit (Credit for above items should be as per conditions separately) and making good disturbed surfaces of walls, floors etc complete all as spfd & directed.

M&L Point wiring with 1.5 Sqmm (Nominal area) PVC insulated and PVC unsheathed FRLS-H multi stranded copper conductor single core cable drawn through and including PVC non metallic conduit of 20 mm dia ISI marked in concealed conduit with complete accessories,including sunk mild steel 1.6 mm thick terminal boxes with 3 mm thick laminated hylum sheet top cover ISI marked complete including PVC insulated and unsheathed single core multistranded copper conductor cable of size 1.5 sqmm green in colour as earth continuity conductor connected to common earth and earth dolly, making good surface with white wash or any type distemper as per existing colour of building complete all as specified and directed for the following:-

One light/fan/bell/exhaust fan point controlled by one, one-way Piano type switch 5/6 Amp complete all specified and directed.

One 3pin/5pin 5/6 Amps socket out let on same board controlled by one, one-way Piano type switch complete all specified and directed.

All as per item No 118 here-in-before but wiring with 2.5 sqmm single core multi stranded copper condcutor 1100 V grade PVC insulated FRLS-H but unsheathed single core for 16 Amps power point on independent board and 2.5 sqmm FRLS-H cable as earthwire complete all specified and directed.

S&F switch piano flush type polycarbonate single pole one way 5 Amps.

S&F switch piano flush type polycarbonate single pole one way 15 Amps.

S&F socket outlet polycarbonate 2 in 1, 3 pin 5 Amps flush type.

S&F socket outlet polycarbonate 2 in 1, 3 pin 5/15 Amps flush type.

M&L ceiling rose 3 terminal / PVC/ polycarbonate, isolated body all as speccified and directed

Supply and fixing in replacement sub main wiring two single core 4 sqmm PVC insulated unsheathed stranded copper conductor cable (FRLS-H) 1100Volts grade drawn in & including rigid PVC conduit 20mm dia or more medium grade concealed in wall along with 4.00 Sq mm PVC insulated unsheathed copper conductor cable (FRLS-H) as earth wire and wire connected with main earth dolly including cutting chasing and making good disturbed portion all as specified and directed.

S&F LED tube light batten 20 watts 4 fts extruded aluminuim housing, translucent diffuser with LED light source, minimum 2000 lumen, natural white, surge protection range-2KV, voltage protection range 120-280 VAC with intergrated driver and surge protection complete all as specified and directed.

Supply and fix in LED Flood light of 50 watt, IP 65 Protection with pressure die cast aluminium housing with toughened glass in the front with unique optic to ensure uniform distribution and making fixing arrangement on Truss/Wall by MS clamp of suitable size to fix light and connecting with suitable three core sheathed copper wire of size 1 sqmm complete all as specified and directed.

S&F in replacement and testing TP&N vertical load line (VTPN) 4 way 415 Volts 50 Hz indoor type double door sheet metal enclosure IP-43 DBs with copper bus bar not less than 160 Amp for each phase with two neutral bar & two earthbar and cable lies for cable management for provision of MCCB 100 Amps ICs=100% ICu,16 KA four pole as incomer incl connecting terminal strip complete and SP MCBs as outgoing complete pre-wired with suitable size copper conductor including taking out old unservicable DB and removing from site and making good of disturbed surface complete all as speciifed and directed. Note - MCCB will be measured and paid separately under respective item of Sch 'A'.

Supply and fixing sheet metal enclosure double door type for MCBs DB SPN (Single pole and neutral) 240V AC 8 way with 200 Amps rated copper busbar, minimum ingress protection of IP40 all as specified and directed.

S & F In replacement of old unserviceable Distribution board (DB) made out of sheet metal enclosure (CRCA sheet) dust and vermin proof SPN 4 way IP 43 (double door) 250 volts with 200 Amps rated copper bus bar neutral bar, earth bar, single pole and neutral, flush to wall complete all as specified and directed.

Supply & fixing MCB, SP, AC, 240 volts of 05 to 32 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed.Note: MCBs should be of same make as of DB 8 way

Supply & fixing MCB, SPN, AC, 240 volts of 40 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed.

Supply and fix in replacement of MCCB 100 Amp, Ics=100%Ics, TPN, 'B' curve, 415 V, 50 Hz including taking down existing unserviceable MCCB of any description complete all as specified and directed. Note: MCCB should be of same make as of VTPN 4 way

Supplying & laying in replacement of LT UG cable ( Conforming to IS 1554) ISI marked 1.1 KV grade XLPE insulated PVC sheathed steel armoured aluminum stranded conductor in trenches/ducts/through HDPE pipe under roads of size 50 sqmm 3.5 core complete all as specifed and directed.

Supplying & laying in replacement of LT UG cable (Conforming to IS 1554) ISI marked1.1 KV grade XLPE insulated PVC sheathed steel armoured aluminum stranded conductor in trenches/ducts through HDPE pipe under roads of size 25 sqmm 4 core complete all as specifed and directed.

Excavation in trenches in soft/disintegrated soil not exc 1.5 m wide and not exceeding 1.5m in depth for laying UG cable/ foundation etc complete all as specified and directed.

Returning filling in soft/disintegrated soil including spreading levelling watering and well ramming in layers n.exc 25cm each layer complete all as specified and directed.

Removal of excavated surplus soft/disintegrated soil to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

Material and labour for Double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure type, laid in trenches/floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends, etc for protection of LT cable XLPE grade 1100 volts complete all as specified and directed.

Labour and T&P for horizontal boring of hole passing through pavement/road/hardstanding by manual or mechanical means suitable for 50mm bore complete all as specified and directed

M&L for Design, supply, Fabrication, Installation, testing and Commissioning factory made, LT panel board, outdoor type, totally enclosed, dust and vermin proof, suitably ventilated, floor mounted, 415 volts, 3 phase and neutral, 50 hz, AC supply system, fully compartmentalised, made out of 3.00 mm thick CRCA sheet steel, protection of enclosure IP-54 as per IS:2147 of 1962 with pre-treatment and powder coated of approved colour including suitable frame work / support made out of suitable size of angle iron / flat iron, front opening type with provision for cable entry, with proper ferrule and cable glands, internal wiring with PVC insulated multi stranded copper conductor FRLS-H cable of adequate size (minimum 1.5 sqmm), including required civil works/anchoring bolts for fixing, PCC foundation etc with and including following all as specified and directed:- (a) Busbar chamber : Electrically grade shrouded aluminium bus bar of capacity 400 Amps for each phase and 400 Amps for neutral and current density 0.8A/Sqmm, including interconnection of all switch gears, fixed on DMC insulators and provision of extension.

Supply and fix GI tubing light grade ISI marked of 50 mm bore dia complete all as specified and directed.

M&L earthing complete with using galvanised mild steel earth plate (electrode) 600x600x6mm thick buried directly in ground earth pit not less than 2.25 mtr depth below ground level with top edge of the plate not less than 1.5 mtr below normal ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to be packed thickness of 15cm all round the plates using 4mm dia GI earth lead wire as earth lead moulded and rivetted to earth plate at one end and connected to main equipment at switch/control board at another end. GI earth lead protected in and including 15mm dia GI medium grade pipe from upper end of earth plate upto equipment with & including 20mm dia bore GI pipe medium grade as water pipe from earth chamber to upper edge of the earth plate. GI funnel with wire mesh fixed on water pipe and provision of PCC (1:2:4) type B1 (using 20mm graded stone aggreagte) as per electrical plate no-03 of SSR-part-I : 2009 and testing on completion all as specified and directed. Note:- (i) If the desired earth resistance is not found within permissible limit, item shall be redone by contractor at no extra cost. (ii) Cost of GI wire 4 Sqmm and 15mm dia pipe medium grade upto 7.5m is deemed to be included in the rate quoted for this item.

S&F LED tube light batten 20 watts 4 ft extruded aluminium housing, translucent diffuser with LED light source, 2000 lumen, natural white, surge protection range- 2KV, voltage protection range 120-280 VAC with intergrated driver and surge protection complete all as specified and directed.

S&F Decorative ultra slim round profile LED Tube light fitiing with extruded polycarbonate, energy efficient for mirror light 10 Watt (2 ft) with LED light source with uniform light output, fixed on site with all accessories complete all as specified & directed.

S&F ventilating / PVC exhaust fans fancy square type 250 mm sweep with plastic fiber body heavy duty 230 Volt AC, single phase complete with plastic louvers and including making suitable size of holes in wall for fixing the fan & making good to disturbed surface with putty,POP, paint etc so as to match the existing surface condition, including making electrical connection with ceiling rose including taking down existing unserviceable ventilating fan of any description complete all as specified and directed.

S&F sub main wiring two single core 4 sqmm PVC insulated unsheathed stranded copper conductor cable (FRLS-H) 1100Volts grade drawn in & including rigid PVC conduit 20mm dia or more medium grade concealed in wall along with 4.0 Sqmm PVC insulated unsheathed copper conductor cable (FRLS-H) as earth wire and wire connected with main earth dolly including cutting chasing and making good disturbed portion complete all as specified and directed.

S&F electric water heater, storage type steel body with copper inner tank and heating element not less than 1.5 KW, capacity 25 litre, BEE 5 Star rated, ISI Marked, 240 V, 50 Hz with all accessories such as safety valve, thermostat, NRV, nut-bolts/ fastners etc, complete all as specified and directed.

S&F PVC Stainless Steel Connection Pipe, of length 450mm, suitable for geyser connection, as per standard specifications, complete all as specified and directed.

S&F Single pole and Neutral enclosure with a two pin and earth plug and socket complete with single pole MCB 20 amp complete all as specified and directed.

S&F bib tap of size 15 mm dia, cast copper alloy, chrome plated, fancy type screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe or for brass ferrule complete all as specified and directed.

M/S RAJESH ARORA (BID ID -3149247)

AMAN MATERIAL AND LABOUR CONTRACTOR (BID ID -3148687)

AMAR NATH SHARMA (BID ID -3149069)

AJAY KUMAR CONTRACTOR (BID ID -3141495)

G.H. INFRASTRUCTURE PRIVATE LIMITED (BID ID -3141682)

BHAGAT JI ENTERPRISES (BID ID -3142227)

Shikha Enterprises (BID ID -3149280)

VIMAL CONSTRUCTION CO (BID ID -3142388)