SPECIAL REPAIRS TO BLDG NO 193 (04 X JCOs MD ACCN) OF SATA REGT WKSP AT SHIKARGARH IN ARMY AREA JODHPUR

Amount

Demolition of cement concrete of any description and in any position not otherwise specifically provided for (such as copings, bands of any type, roof padding, kerbs, sunken etc; overall thickness and removing the dust debris etc to a distance not exc 250 meter from site and disposing the same complete all as specified and as directed by Engineer in charge.

M&L for plain cement concrete (1:2:4) type B0 using 12.5mm graded stone aggregates as over roof for making good depression/ undulation to make the existing roof surfaces as filling in depression of roof slab/ floor padding etc complete all as specified and as directed.

M&L for carrying out water proofing treatment for roofs in the following stages - (i) M&L Rendering 10mm thick plaster in cement mortar (1:4) mixing with integral water proofing liquid (as per manufacturer's instructions) over concrete surfaces finished even and smooth with out using extra cement including preparing of surface throughly by cleaning washing and removing dust, dirt, oil, grease, any loose particle etc, on existing concrete surface complete all as specified. Note : (WPC shell be measured separately and paid for under respective item of schedule). (ii) First coat of bitumen primer confirming to IS 3384 @0.300 Kg/ Sqm over plastered surafces (iii) Second layer of 3.0 mm thick APP modified polymeric membrane with centre core of Single non woven polyster reinforcement and having weight not less than 3.6 Kg/ Sqm with mineral gravel finish on top complete laid with blown type bitumen grade 85/25 @ 1.20 Kg/ Sqm complete all as specified and as directed.

M&L for plain cement concrete (1:2:4) type B0 using 12.5mm graded stone aggregates as in roof kerbs rounded or chamfered on edges etc complete all as specified and as directed.

M&L for plain cement concrete (1:3:6) type C-1,using 20mm graded stone aggregates as in coping to parapet walls including necessary formwork complete all as specified and as directed.

Supply only integral water proofing liquid ISI marked Make: Pidiproof LW

Demolition of cement concrete (unreinforced) in ground floor not exceeding 15cm thickness below or above ground level including floor finishes and removing debris from the site all as specified and as directed.

Dismantling glazed tiles/ kota stone/ terrazzo tiles any type as in dado/ skirting etc; including cement mortar bedding ( but not backing ) complete all as specifide.

Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed.

Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) as in skirting / dado, Cut out of ceramic tiles of size exceeding 0.11 sqm but not exceeding 0.36 sqm, (Matching with floor tile of the same room) set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM (1:4) complete all as specified and as directed.

M&L for non skid ceramic coloured tiles of approved shade and pattern, 7 to 8 mm thick , area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm laid in floor, set and jointe (square/ rectangular) in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.

M&L for glazed ceramic coloured tiles of approved shade and pattern of size 350x 250x7mm/ 450X350X7mm/ 300X450X7 to 8mm thick or any other nearer size as approved by Engineer incharge in vertical surface set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in CM 1:4 as in backing coat of tiles complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 18-20 mm (+ 2mm) thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed.

M&L for mirror polished machine cut Kota stone slab 15-16 mm thick in riser of steps, skirting, dado and pillar laid over and including 10mm thick rendering in CM 1:4 and jointed complete all as specified and as directed.

M&L for 16 -18mm thick granite (black colour) work (table rubbed and polished) in steps, shelves, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed or bedding layer in CM (1:4) complete all as specified and as directed.

Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in plinth protection, 50 mm thick, surfaces finished even and fair without using extra cement including provision of construction joints complete all as specified.

M&L for 75mm thick PCC (1:4:8) type D-2, (40mm graded stone aggregate) as in sub floor, sub bases, floor and paving etc complete all as specified and as directed.

M&L for 60mm thick factory made pre cast cement concrete rubber moulded laquer finish using chemical and admixure inter locking tiles having compressive strength not less than 350 kg/Sqcm of shape and colour as approved by GE, laid over and including 25mm thick compacted approved sand cushioned surface, joints filled by fine sand and compacting the top surfaces of paver blocks after laid etc of approved make all as specified and as directed.

M&L for factory made precast cement concrete solid blocks M-30 Grade, using 20 mm graded crushed stone aggregate as in kerb stones of any size (with plain or interlocking joints as directed) set in cement mortar (1:4) for path edgings etc; embedded in position including all necessary excavation, tamping ground arround blocks and removal of rubbish/ surplus soil etc complete all as specified and directed by Engineer-in-Charge.

M&L for cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in kerbs or benching etc including necessary form work complete all as specified.

Demolition of stone/ brick work masonry, built in cement mortar including all quions, arches, pillars etc but excluding ashlar facings, dressed stone work, serviceable stone aside for reuse and removing unserviceable material in low laying area complete all as specified and as directed.

M&L for squared rubble walling jodhpur type, brought upto course,well bonded bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed.

-ditto- all as per above item but, except stone complete all as specified and as directed.

M&L for providing precast cement concrete block masonary (1:3:6) with solid blocks exc 10cm in width and setting in cement mortar (1:6) all as specified and as directed.

Extra over for hammer dressing to face stones with maximum depression on face from a straight edge not exc 20mm and dressing face beds and joints as specified to squared rubble walling,Jodhpur type, brought upto courses all as specified and as directed.

Taking down cement plaster, any description, on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc and disposal of debris complete all as specified and as directed

M&L for rendering 15 mm thick in CM (1:6) over stone masonary, concrete surfaces, finished even and smooth (without using extra cement) all as specified and as directed.

M&L for 15 mm thick rendering on stone masonary wall surfaces in CM (1:4) finished fair and even all as specified and as directed.

M&L for dubbing out average 20mm thick in cement plaster (1:4) on uneven/ irregular surface such as walls / ceilling / chajjas etc. complete all as specified.

Rough cast plaster 15mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished even and rough without using extra cement complete all as specified.

M&L for 10mm thick rendering in CM (1:3) on ceiling surfaces finished surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for carrying out water proofing treatment for sunken portion in the following stages - (i) Taking down of existing sunken slab treatment from the sunken portion and cleaning the surfaces washing down with water and rubbish of the pemises , cleaning and filling cracks with sealing compound, brushing neat cement slurry @ 3.00kg/sqm and grouting 25mm thick cement concrete type B-0 (1:2:4) using 12.5mm graded stone aggregate on sunken slab portion and finishing the top surfaces even and smooth without using extra cement. (ii) M&L for two coat of acrylic cementitious water proofing coating (Dr FIXITpidifin 2k manufactured by M/s Pidilite Industries Ltd or equivalent) and followed by a overlay protective screed (10mm thick cement mortar (1:4) along with liquid water proofing compound approved make as per manufacturer's instructions) on top surfaces of sunken slab after preprations as mentioned above. Method of application for acrylic cementitious water proofing coating achieved as per manufacturers instruction complete all as specified and directed.

Dismantling cast iron work of any description and in any position complete all as specified.

S&F 100mm bore cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, laid in trenches or in floor etc; complete all as specified.

Fixing only in repair 100mm bore any type of soil, waste and vent pipes in any length with or without ears, laid in trenches or in floor etc; complete all as specified.

S&F 100mm bore cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, fixed to walls etc; complete all as specified.

Fixing only in repair 100mm bore any type of soil, waste and vent pipes in any length with or without ears, fixed to walls etc; complete all as specified.

S&F 75mm bore cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, laid in trenches or in floor etc; complete all as specified.

Fixing only in repair 75mm bore any type of soil, waste and vent pipes in any length with or without ears, laid in trenches or in floor etc; complete all as specified.

S&F 75mm bore cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, fixed to walls etc; complete all as specified.

Fixing only in repair 75mm bore any type of soil, waste and vent pipes in any length with or without ears, fixed to walls etc; complete all as specified.

S&F 100mm bore pipe cast iron 'P' or 'S' trap, complete all as specified.

S&F 75mm bore pipe cast iron 'P' or 'S' trap, complete all as specified.

S&F 100mm bore pipe cast iron cowls, complete all as specified.

Fixing only in repair 100mm bore pipe cast iron or any type cowls, complete all as specified.

S&F 75mm bore pipe cast iron cowls, complete all as specified.

Fixing only in repair 75mm bore pipe cast iron or any type cowls, complete all as specified.

M&L cast iron up to 150mm bore fittings of Bends (any type, radious and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces, single branch, 'Y' junctions, double branch, cross (all sockets or socket and spigot) collars, caps and plugs etc; complete all as specified.

Fixing only in repair any type or cast iron up 150mm bore fittings of Bends (any type, radious and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces, single branch, 'Y' junctions, double branch, cross (all sockets or socket and spigot) collars, caps and plugs etc; complete all as specified.

M&L 100mm bore cast iron pipes and fittings joints or connections are filled/ sealed properly by epoxy sealant of ISI mark or M-Seal (Make:- Dr Fixit) apply as per manufacturing instructions, complete all as specified.

M&L 75mm bore cast iron pipes and fittings joints or connections are filled/ sealed properly by epoxy sealant of ISI mark or M-Seal (Make:- Dr Fixit) apply as per manufacturing instructions, complete all as specified.

S&F for 100mm bore pipes stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall etc; complete all as specified.

S&F for 75mm bore pipes stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall etc; complete all as specified.

M&L cement concrete type E-2, 1:5:10 (40mm graded crushed stone aggregate) as in sunken portion complete all as specified.

S&F 40mm bore steel water tubing medium grade galvanised inserted at the end of lateral slope projecting at least 15cm beyond the outer most projected part of the building below the drain pipe up to two storey construction as spout for sunken complete all as specifide.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but not exc 4.00 sqm each and removing from site or to store as directed by Engineer incharge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.5 sqm each and removing from site or to store as directed by Engineer incharge.

Taking down shutters any description exc 1.00 sqm but not exc 2.00 Sqm each and removing from site or to store as directed by Engineer incharge.

Taking down shutters any description exc 1.00 sqm but not exc 2.00 Sqm each and refixing the shutter in same opening after easing and adjusting complete as directed by Engineer incharge.

Cutting holes in brick walls built in cement or cement lime mortar for inserting holdfasts and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) Type B-1 as required depth of embedded portion of hold fast exceeding half brick but not exc one brick complete all as specified and as directed.

Pressed steel framed made out of 1.25mm thick MS sheet, of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed.

Pressed steel framed made out of 1.25mm thick MS sheet, of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed.

Cement concrete (1:3:6) type C-1 using 20 mm graded stone aggregate as in fillings and mass concrete, filling backs of chowkats etc., complete all as specified

Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in lintels upto 1.50 m clear span, cills , steps, seismic and other similar bands, copings, kneelars, apex stones, bed plates, bed blocks of hold fasts etc including necessary form work complete all as specified

Factory made 35 mm thick Plain framed, panelled shutters (two panel) with 2nd class hard wood rail and style with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified.

Factory made 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) kiln seasoned and chemically pressure treated complete all as specified.

S&F of Factory made steel window box type using ERW hollow 'P' section comprising double frame for and including gauged and glazed Skeleton shutter jointed internally with flat iron 40x4mm complete including grill of 8/10mm square bars as directed by Engineer incharge, fixed horizontally @ 10cm c/c, hinges, handle, tower bolts, stops, lugs etc. (with provision of fixing for cooler if required) all as shown on drawing No CEJZ/TD/20 sheet 1/3 to 3/3 fixed with and including providing twocoats of synthetic enamel paint alround over and including one coat of red oxide all as directed Note:- Guard bar/ grill shall be measured and paid separately under respective item of Sch 'A'.

M & L for fabrication of aluminium powder coated ventilators (with louvered) fabricated with anodized aluminium rectangular section in frame & with deco grill of approved design & stainless steel wire cloth on the outer side of frame & trade pattern louvers with suitable mechanism for tilting /opening closing etc all as per sample kept in GE office & fixed in position complete all as directed. (Note : Glass pane in louvers & stainless steel wire cloth shall be measured & paid separately)

S&F Sheet glass ordinary quality 4 mm thick and glazing with oil putty or fixed with wooden beads or fixed with rubber gasket in squares any size of pane complete all as specified & as directed.

.-Ditto- all as per above item but 4mm thick frosted glass complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified & as directed.

Mild steel round bars welded to steel windows or ventilators as in guard bars framed or unframed complete all as specified & as directed by Engineer incharge. Note: - Guard bars shall be factory welded & given one shop coat of red oxide or zinc chromate primer. Cost of factory welding & Shop coat of primer is deemed to be included in quoted rates.

Factory made solid panel PVC door shutters 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing S&F. Make : Rajshree Doors or equivalent as approved by GE.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing. Make : Rajshree Doors or equivalent as approved by GE.

S & F 100 mm size PVC/ Stainless Steel (as approved by Engineer incharge) butt hinges all as specified and directed.

S&F mild steel door handles, stove enameled black, 150 mm long and fixed with steel screws complete all as specified.

Mild steel barrel tower bolts, stove enameled black, with bright bolt, 150 mm long and fixed with steel screws complete all as specified.

300 mm long mild steel, sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12 mm dia with and including bolts and nuts complete all as specified.

S&F Mild steel rat tail rod pattern helical door spring of size 300mm including roller and roller plate fixing to iron frame by welding complete all as specified & as directed.

Dismantling wrought iron or mild steel work of any description and in any position not otherwise specifically provided for (framed/ unframed work) complete all as specified.

S&F framed work as in doors chowkats of MS angle iron or MS hollow square/ rectangular any type/ size with gusset plates, rails, braces,cooler stand, chajja framed complete drilled for fixing of door etc; to be prepared for hanging with and including hold fasts and locking arrangements confirming to FE- 290 (Gde-E- 165) with and including providing twocoats of synthetic enamel paint alround over and including one coat of red oxide all as directed

Pressed steel rectangular frames for built in cup board doors, made out mild steel sheet 1.25mm thick with girth of frame 185mm including necessary MS rawal plugs and fixing 75mm long butt hinges medium weight cold rolled mild steel etc including applying a shop coat of Zinc chromate primer all complete as specified .

Pressed steel door shutters including stiffners made out of mild steel sheet 1.25 mm thick cut to size, holes punched and welded seams including bending or turning up all around, mitred angles etc as required and applying a shop coat of zinc chromate primer all as per Godrej Pattern and as directed by Engr-in-Charge. Note: (i) Measurement of door shutter shall be taken as exact size of cup board opening (excluding door frame and folded/turned up portions). (ii) Stiffners of 150mm girth and height equal to height of shutter mode to shape as directed by EIC shall be provide to each leaf. Cost of these stiffners shall be deemed to be included in the unit rate quoted for door shutters and no extra measurement/ payment shall be made for the same. complete all as specified.

Pressed steel shelves made out of mild steel sheet 1.25mm thick cut to size, holes punched including bending or turning up all around, mitered angles etc as required and applying a shop coat of zinc chromate primer all as per Godrej pattern and as directed by Engr-in-Charge (shelves shall be fixed to wall with required Nos of cadmium plated screws using PVC rawl plugs) Note : (i) Measurement of shelves shall be taken as exact horizontal/ vertical inner size of cup board ( excluding folded/turned up portions) complete all as specified.

Locking arrangement using mild steel mortise lock 4 levers with 2 Nos of keys of size 100mm (Make Godrej/Harison/Navtal) including MS chromium plated handle and 2 Nos MS locking rods out of 10mm dia not exc 1000mm long fixed to mortise lock and handle with necessary bolts and nuts covered by MS sheet 1.25 mm thick all as per Godrej pattern and as directed by EIC complete all as specified.

Supply and fixing Stainless steel decorative type hanging rod of MS pipe 19mm bore having 1.6mm wall thick in any length (as per sample) complete all as specified and as directed. Note: - Each curtain rod to be provided with one pair of brackets trade pattern suitable for 19mm bore hanging rod fixed to wall (brackets shall be fixed to wall with MS Chromium plated screws using PVC rawl plugs) complete all as specified.

S & F for Prelaminated particle board 18/ 19mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work with wooden beading as required fixed in repairs i.e., including taking down and removal of old unserviceable boarding of any description and in any position complete all as specified and as directed.

2nd class hard wood plain fillets, square rectangular or triangular in section, wrought bullnozed , rounded or chamferred on one edge or face fixed with nails not exc 3 sqcm complete.

Continous (piano) hings mild steel bright finish or elecrogalvanised fixed in repair Width of Flap 40 mm when open complete.

S&F ball catches with 8mm dia steel ball and brass body and stiking plate incluing letting and fixed in repairs.

S&F alluminium anodised handles 100 mm long fixed to windows all as specified and directed.

S&F 50mm dia polished hard wood knobs fixed with screw complete fixed in repairs.

Decorative mild steel curtain rods 32mm dia (powder/PVC coated) including fixing brackets & side cups complete fixed in repairs i.e., including taking down the existing unserviceable curtain rods complete all as specified and directed

S&F Powder coated aluminium anodised deco grill weighing not less than 1.40 kg/ sqm and fixing necessary joining cleats/ frame etc; complete all as specified.

Taking down 15mm bore steel water tubing and connections etc, including cleaning for refixing or removal from site complete all as specifide.

Taking down 20mm bore steel water tubing and connections etc, including cleaning for refixing or removal from site complete all as specifide.

Taking down 25mm bore steel water tubing and connections etc, including cleaning for refixing or removal from site complete all as specifide.

Supply, fixing, Jointing and testing 15 mm bore galvanised mild steel water tubing 'medium grade' with and including all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed.

Supply, fixing, Jointing and testing 20 mm bore galvanised mild steel water tubing 'medium grade' with and including all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed.

Supply, fixing, Jointing and testing 25 mm bore galvanised mild steel water tubing 'medium grade' with and including all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed.

Fixing only 15mm bore steel water tubing any grade with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specifide.

Fixing only 20mm bore steel water tubing any grade with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specifide.

Fixing only 25mm bore steel water tubing any grade with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specifide.

Vitreous china squatting pan, Orissa pattern, size 580x440mm white/ coloured with integral foot rests including flus pipe and connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete all as specified.

PVC 10 ltr. Cap. valveless syphonic action type, flushing cictern, low level, white/ coloured with inlet, ball valve, float and handle including brackets and connection to pipe etc. all as specified.

Vitreous china wash basin, white/ coloured, flat back, size 550x400mm including PTMT waste fittings, 32mm bore size, waste pipe pvc 32mm bore and angle iron brackets of required size and length etc. and making good disturbed surfaces to match with the existing complete all as specified.

S&F Steel Sink (Kitchen or Laboratory sink) made of Stainless steel 1.00mm thick with plugs, washers and PVC waste pipe & CP Waste 40mm/ 32mm size as approved including bedding in cement mortar/ chemical on to dwarf walls or including fixing vertical white marble 18-20mm thick (not exceeding 1.2 sqm each piece) and connecting union to pipe overall size 1040 x 510 x 203mm with bowl size 510 x 410 x 203mm with drainage board Cat Part No 1244-D Make 'Prayag' or Equivalent, fixed in repair incl removal of old unserviceable sink of any description & size complete all as specified & as directed.

Supplying and replacement of stainless steel plate rack, as in repairs, made out of 0.63 mm thick sheet of size 750x900x250mm (appx.), as per standard pattern and design (approved quality) with plugs, screws, washers etc complete all as directed. Note : Weight of plate rack shall not be less than 8.00 kg each.

Low density polythene pipe (LDPE) of pressure rating 6 Kg per Sq.cm, 450 mm long, heavy duty with two sets of brass nuts & washers (one at each end) etc suitable for 15mm bore of pipe as in repair complete all as specified.

Disconnecting existing PVC tank exc 500 Ltrs and not exc1000 Ltrs setting aside (or lowering if required) for repairs. Cleaning, etc and hoisting if required reconnecting refixing in position complete all as specified and directed.

S&F in repair 1000 ltr capacity rotational moulded polyethylene water storage tanks triplelayer (cylindrical vertical with closed top) in white colour hoisted and fixed in position including 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe all as specified in SSR Part-I complete all as specified.

S&F in repair 15mm bore chromium plated Bib taps, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified.

Supply and fix in repair for Pillar tap, brass, 15mm dia, with capston heads, chromium plated, fancy type screwed down, high pressure, with or without lettered hot or cold, with long shank, screwed shanks and fly nuts, screwed for iron pipes or for wash hand basin all as specified and as directed.

S&F in repair 15mm bore stop valve/ angle stop cock chromium plated, fancy type cast copper alloy, screwed down, high pressure, screwed both ends for iron pipe with long shank and cup complete all as specified.

S&F in repair 25mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified.

S&F in repair Chromium plated shower roses 125mm size with or without swivel joints, any size, including fixing to steel pipe or union suitable for 15mm bore pipe etc; complete all as specified.

S&F in repair CP towel rail 450mm long fixed with and including CP brass screws and wooden/ plastic cleats complete all as specified.

S&F in repair CP greating doom 100mm dia complete all as specified.

Supply and fixing 25mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight for 25mm ball valves-455gms) fixed in repairs i.e., incl taking down and removal of old unserviceable float valves complete all as specified and as directed.

S&F in repair PVC SWR type 'B' socketed rain water pipes 110mm dia conforming to IS: 4985/ IS: 13592 complete all as specified and as directed.

S&F in repair PVC SWR bend/shoe of PVC 110mm dia suitable for 110 mm bore / dia PVC SWR rain water pipes complete all as specified and as directed.

M&L for carrying out treatment for RCC Chajja’s, Ceilling, facia etc; in the following stages :- (i) Dismantling and removing damaged core concrete by manually/ mechanically means in columns, beam, roof slab, chajja, lintels, etc complete including disposal of unserviceable debris. (ii) Diamond wire saw cutting making profile at edges and avoiding feather edges.(iii) Hydro-demolition cutting / cleaning with high-pressure water jetting (iv) Chipping of loose concrete from surface to expose sound concrete beneath using light chisel, hammer & also preparing concrete surface to receive further treatment, disposing the unserviceable debris (v) Sand blasting for cleaning of reinforcement and chipped surface of concrete so as to cause an intense abrading of the reinforcement and removal of rust from entire surface of reinforcement to achieve shining bright surface (vi) Cleaning reinforcement of total rust by tapping or using wire brush or any other suitable way including from behind and around the reinforcement bars to give it a totally rust free finished steel surface (vii) Providing and applying approved chemical rust remover with paint brush on corroded rebar and removing loose particles after 24 hours of its application and washed with sufficient quantity of water to make rebar free from corrosion (Dr. Fixit Rust Remover/equivalent), (viii)Surface preparation to remove all dust, dirt, loose rust scales etc., with wire brush, emery papers, rotary wire bristle brushes and grinding (if required) to the concrete surfaces to receive further repair treatment .(ix) Providing & fixing new reinforcement of various diameters as required at site in the form of mild steel and /or steel confirming to IS and lapping, welding, anchoring suitable to the old reinforcement including cutting, bending with all tools & tackles etc; (x) Providing and fixing GI weld mesh (1” x 1” x 12 gauge) with 30 cm lap at junction, one layer around the cross section of beams/ slab and along the span length. (xi) Providing and applying approved epoxy zinc rich anti-corrosive coating of 40 micron dry film thick/approved thickness of Dr. Fixit Zinc Rich Primer/ equivalent to the exposed reinforcing bars after application of rust remover, on the shear connectors/welded mesh/additional reinforcement of entire concrete repair surface. (xii) Dubbing out PMC 20mm thick (average thickness),(Polymer modified mortar/concrete) on uneven/ irregular surface such as walls / ceiling / chajjas etc. (using 12.5mm graded crushed stone aggregate) including 10mm thick PMM plaster in CM 1:3 ratio (Polymer modified mortar) on concrete surface (when concrete is green) ,(using Polymer modified 20% by weight of cement) complete all as specified and directed by Engr-in-charge.

Preparing new or previously untreated surfaces of wood and wood based material of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

Preparing new or previously untreated surfaces of steel or iron work of any description and girth over 10cm and applying two coats of synthetic enamel paint complete all as specified and as directed by Engineer incharge.

Preparing new plastered surfaces and M&L for applying chalk whitening/ concrete primer and /or cement base putty as required incl preparing the surfaces smooth by rubbing and / or sandpapering and M&L two coats of Distemper oil Emulsion on new plastered surfaces all as directed by Engr in charge.

Preparing new plastered surfaces and M&L for applying concrete primer and /or cement base putty as required incl preparing the surfaces smooth by rubbing and / or sandpapering and M&L two coats of cement base paint on new plastered surfaces all as directed by Engr in charge.

Preparation of new plastered surfaces of walls etc. & applying three coats of lime white wash on walls complete all as specified.

Preparation of new plastered surfaces of ceiling etc. & applying three coats of lime white wash on ceiling complete all as specified.

Preparing old plastered surfaces brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots incl washing , rubbing down and stopping of distempered or painted surfaces and M&L for applying one coat of distemper oil emulsion on old plastered surfaces all as directed by Engr in charge.

Preparing old surfaces incl brooming surfaces, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil or greasy spots incl washing rubbing down and stopping of distempered and painted surfaces and M&L for applying one coat of cement base paint on walls etc., complete all as specified and as directed.

Preparation of old decorated plastered surfaces of walls etc. & applying one coat of white wash complete all as specified.

Preparation of old decorated plastered surfaces of ceiling etc. & applying one coat of white wash on ceiling complete all as specified.

Taking down carefully copper/Aluminium point wiring including (light, fan, socket or power complete fittings, such as switches, ceiling roses, pendant holders, Batten holders, shades concial fan regulators, light or poer sockets etc) removing materials from site and making good distrubed surfaces of walls roofs etc all as directed.

Taking down carefully UNSV main switch and DB's including MCBs of any size make, type and capacity and depositing at site as directed.

M&L for One light point/One Fan point controlled by one one/way switch concealed pointd wiring complete with multistrnaded copper conductor 1.5 sqmm size PVC insulated unsheathed cable 1100 volt grade, conforming IS 694 & color code in conduit system of woring, drawn in including medium grade PVC conduit not less than 20 mm dia concealed, including cutting chases, finising of slote by means of cement mortor making good to the existing surface of the wall & touching with the existing colour of wall with three coats and making food disturbed surface complete, sunk in pressed steel terminal boxes of required size not less than 1.6 mm thick factory made and factory painted with top cover 3 mm thick plastic laminated sheet fixed with brass screw and washer with all accessories including single core solid conductor copper 1.5 sqmm size solid PVC insulated unshethed cable as earth wire to common earth and connected to earth dolly drawn in same conduit complete all as specified. Note: Work shop shed point each point (15 to 25 RM) in workshop hanger.

Ditto as per item no 137 but One 3 Pin 5 Amps socket outlet on same board with switch

Ditto as per item no 137 but One 3 Pin 5 Amps socket outlet on independent board with cable of 1.5 sqmm size.

Ditto as per item no 137 but One light point control by two way switches

Ditto as per item no 137 but One bell point control by one way switches

Ditto as per item no 137 but using 2.5 Sqmm PVC insulatd, unsheathed cable for one 3 Pin socket outlet 15 Amps on independent board.

M & L for sub main wiring with 2 single core 6 Sqmm copper conductor (Multistandered) in concealed PVC conduit of suitable size as required, PVC board with all fittings including 4.0 Sqmm copper conductor as earth continuity all as directed.

All as above item No 5 but using 4 Sqmm cable single core copper

S&F Garnet 22 Watt LED Batten with exturded aluminium housing With in Built LED strip, LED shall be having LM80 complied as per L70 standard leds with 6000-6500k CCT ,Maximum power comsumption s be 22watt with min ,1800 system lumens, 3tsage CCCV driver with voltage range of 150-270 AC and DC output operating voltage of driver should be complited to SELV norms not exceeding 72 DC only, All as specified & directed by Engr -in-charge . make -WIPRO/BAJAJ/PHILIPS

S&F Garnet 05 Watt LED Batten with exturded aluminium housing With in Built LED strip, LED shall be having LM80 complied as per L70 standard leds with 6000-6500k CCT ,Maximum power comsumption s be 05 watt with min 350 system lumens, 3 stage CCCV driver with voltage range of 150-270 AC and DC output operating voltage of driver sould be complied to SELV norms not exceeding 72 DC only. All specified & directated by Engin-in-Charge.. Make.. WIPRO/BAJAJ/PHILIPS.

Supply and laying in trenches/fixed on walls/poles of passing through pipe, XLPE insulated armoured heavy duty LT U/G electric cable with aluminium conductor 1100 volts grade with suitable cable glands and lugs etc as required of 25 Sqmm x 4 core sizes:-

Supply and fix GI tubing light grade for protection of cable at wall/trench with fixing accessories as directed of 50 mm dia bore sizes

Material and labour for cutting of PCC floor/plinth/wall etc for insertion of GI pipe for protection of LT cable including making good disturbed surface.

S & F lamp Holder PVC polycarbonate type with back plate & LED Bulb 12 Watts. Make: Philips/BAJAJ

Supply and fixing switch piano flush type 5 Amps single pole one way 5 Amps 240 Volts. Make: Anchor(Penta)/Havells(Reo)/Cona/SSK

Supply and fixing switch piano flush type 5 Amps single pole two way 5 Amps 240 Volts. Make: Anchor(Penta)/Havells(Reo)/Cona/SSK

S/F switch socket combination 2 in 1, 3 Pin, and 5 Amp flush type Make: Anchor(Penta)/Havells(Reo)/Cona/SSK

S/F switch socket combination 3 Pin 5 and 15 Amp 2 in one flush with inbuilt indicating lamp.type Make: Anchor or equivalent

S&F in replacement socket outlet 2 in 1,3 Pin 5 and 15/16 Amp flush shuttered type ISI mark. Make: Anchor(Penta)/Havells(Reo)/Cona/SSK

S&F Bell switch including Bell ding dong type, one way, 240 Volts, AC, ISI marked Make: Anchor(Penta)/Havells(Reo)/Cona/SSK

S/F ceiling rose surface bakelite three terminal 65 x 50 mm three terminal 250/230 volts ISI marked Make: Anchor(Penta)/Havells(Reo)/Cona/SSK

S & F for Vertical DB IP43 protection metal door DB 200 amps rated busbar, pan assembly etc, with interconnection links, blanking plates, cable ties, identification lables TPN 4 way with provision to mount TPN 100 Amps 4 pole as in comer and SP/TP MCB as out going incl flush in to wall, necessary cutting to walls etc including two coats of while/colour washing/distempering etc to the disturbed surfaces to match the existing complete all as specifried & directed. (Product Description-F204AC-125/0,03). Make :- Legrand /L&T/ABB

S/F in replacement of U/S MCB DB single pole and neutral double door IP 5408 08 way 240 volts. Make: Legrand 6077 31 /L&T/ABB

S/F in MCB 10 KA rupturing capacity conforming to IS-8828 of MCB SP 6-32 Amp 240 Volts product desciption S271.C10 Make: Legrand /L&T/ABB

S/F in MCB of 10 KA rupturing capacity conforming to IS-8828 of SPN 63 Amps S271.C40NA Make :- Legrand /L&T/ABB

Supply and fixing connecting rotary type fan regulator A/C 240 Volts Make : anchor/bajaj/L&T

Supply and Fixing of Exhaust fan of Size 300 mm including making hole in wall, making good disturbed face and mactching to existing colour and complete electrucal work all as derected by ingr-in-charge. make : Bajaj /Crompton/Khaitan

Supply and fixing single pole and neutral enclosure with a two pin and earth plug and socket complete with one single MCB SP 16 Amps. Make : Legrand /L&T/ABB

Supply , fixing, connecting and testing complete AC Single phase KWH energy meter of accuracy class 1.0 , 240 V, 50 HZ with backlite LCD display of rating 5 -30 A conforming to IS 13779, CBIP-88 report single phase 2 wire, class I, capacity 5-30 Amp rating electronic LED display, optical port temper proof, LCD screen having scroll reading in KVAR, KWH, MD, time and date of bill, alarm 2 Nos including temper proof engineerring plastic transparent poly carbonate enclosure. Make HPL/SECURE/SIEMENS. Note (i) The rates are deemed to be included for providing pin tpe cable end connector at incoming and outgoing-4 Nos :- Unservicable meter will be deposited in AGE E/M Store.

M&L for Earthing complete with galvanized steel earth plate electrode 60 x 60 cm x 6.0 mm thick bured directly in ground (Earth pit not less than 2.25 Mtr deep below groung level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to incl galvanized iron or steel earth lead wire 4.0 mm dia by means of nut bolts, check nuts and washers and galvanized iron or steel pipe 15 mm dia medium grade for protection of GI wire and connected to main switch board watering pipe shall be 20 mm dia GI medium grade incl Excavation earth work in any type of soil, PCC pit including RCC cover complete.

Excavation in trenches not exceeding 1.5 m wide and not exeeding 1.5 m in depth and getting out in soft/loose soil for removing/laying of cable etc as directed by Engineer-In-Charge.

Returning, filling excavated soil in trenches including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick each all as directed by Engineer-In-Charge.

Removing surplus excavated soil to a distance not exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point.

M & L for sand cushioning to PVC cable with using clean dry and natural river sand gently punning below/around cable all as specified.

Supply and laying 40 to 50 mm thick roughly hammer dressed Jodhpur stone slab cover 25 cm to 30 cm wide and not less than 60 cm long dry laid aboutting each other with gap between adjacenet slabs not exceeding 10 mm for underground cable for protection.

HINDUSTAN TRADING COMPANY

Shri Ram Traders Co

Hariom Construction Company

M/S Dharam Chand Lal Chand Jain

Bhagwati Construction Company

Pioneer Enterprises

chhaba construction