Special repair to security fencing around MES office and married accn complex of AGE (I) Cannanore.

Amount

Excavating in post holes (or similar holes) each n exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard/dense soil all as directed. Note : Rates included the cost of surface dressing 30cm wide on either side of fencing and removing rubbish out side MD land.

Dismantling RCC fencing post/struts of any section including taking out embedded portion and making good disturbed ground and removing rubbish out side MD land all as directed.

Dismantling RCC fencing post/struts of any section including taking out embedded in concrete and making good disturbed ground and removing rubbish out side MD land all as directed.

Dismantling barbed wire fencing, any type and size all as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as directed.

M&L PCC 1:4:8, Type D2 (using 40mm graded stone aggregate) as in foundation, filling mass concrete for post,pole etc. all as specified and directed.

M&L PCC 1:3:6, Type C2 (using 40mm graded stone aggregate) as in foundation, filling mass concrete for post,pole etc. all as specified and directed.

M&L mild steel works as in post and struts in fencing including cutting tops to shape as directed, welding, drilling holes, notching for wire, etc. including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe- 410-0 or Fe-310-0 all as specified and directed.

M&L galvanised 2 stand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of strandard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire , stples or steel pins etc as directed (each line wire to be measured) all as specified and directed.

M&L preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel painting over a coat of red oxide primer all as specified and directed.

S&F steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc; complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive of steel sheeting or other covering,) and hanging; also fastening and fixing complete conforming to Gde Fe 410-0 or Fe 310-0 all as specified and directed.

S&F for 1.60mm thick, Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete all as specified and directed.

RS ENTERPRISES

Sujith T