REPAIR/REPLACEMENT OF UNSERVICEABLE STREET/ SECURITY LIGHTS AND OTHER ALLIED WORKS AT MILITARY STATION DHARAMSHALA.

Amount

Excavation in trenches in any type of soil not exceeding 1.5m wide and not execeeding 1.5m in depth and getting out in any type of soil complete all as specified and directed by Engr-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick, complete all as specified & directed by Engr-in-Charge.

Removing excavated surplus material to a distance n.exc. 50 m and depositing where directed at a level n.exc 1.5m above starting point complete all as directed by Engineer-in-Charge.

Sand cushioning to underground cables with a layer of sand 8cm before laying the cable and 15cm after lying the cable complete all as specified and directed by Engr-in-Charge.

Sub class 'B' brick, old size, brick covering laid dry, flat transversally along the length of cable on sand cushioning, with width equal to the length of the brick complete all as specified & directed by Engr-in-Charge and directed.

Structural steel work (in replacement) as in cross arms bracings, supports, clamps and back plates fabricated from steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed by Engr-in-Charge and applying one coat of primer coat, one under coat and one finishing coat of aluminium paint, complete all as specified & directed by Engr-in-Charge.

Replacement of existing unserviceable GI tubing, light grade 50mm bore for passing through cables under the floor, along the wall or along the pole complete all as specified and directed by Engr-in-Charge.

Replacement of existing unserviceable SVL/HPSV fittings with new generation energy saving & environmental friendly, long life, LED street light fittings, 30 watt, made upto pressure die cast aluminium housing with high power LED as lighting source and lense embedded PC cover having top opening separate driver compartment with IP 66 protection & impact resistance of IK 07 with 10KV built in surge protection device including GI bracket of 40mm bore pipe,1.5 mtr long, bent to shape required as per site and making neccessry connection with 2.5 sqmm copper wire from fitting to pole box, complete all as specified and directed by Engr-in-Charge. Make : Havells/ Bajaj/ Wipro/CG.

Replacement of old and weathered ACSR aluminium conductor of size 6/2.11 or 6/2.59 squirrel weasel and with aluminium binding wire on poles etc straightening / tightening with mechanical devices complete all as specified and directed by Engineer-in-Charge.

Replacement of exisitng unserviceable shackle type insulators, procelain, vitreous, white, brown or green for working pressure 1100 volts of 90mm dia and 75 mm height ,including galvanised mild steel strips of 31 x3mm size including 12mm dia insulator bolts, washers and nuts , including taking down old insulators of any type, shape and size and removing from site, complete all as specified & directed by Engr-in-Charge.

Replacement of exisitng unserviceable Galvanised steel wire 4mm dia to earth wire on HTLT poles for fabrication of cradles hexagonal/ rectangular guards out of galvanised steel wire 4mm dia etc, complete all as specified and directed by Engr-in-charge.

Supply & replacement of exisitng unserviceable XLPE insulated screened and PVC sheathed armoured electric power LT cable heavy duty with aluminium conductor nominal cross sectional area 50 Sqmm 3.5 core for working voltage upto including 1100 volts conforming to IS-7098 (Part-I) 1988 (Compaction Conductors shall be shaped and arrangement for the same shall be on the cable), including taking out existing cable, complete all as specified & directed by Engr-in-Charge and as directed.

Supply & replacement of exisitng unserviceable XLPE insulated screened and PVC sheathed armoured electric power LT cable heavy duty with aluminium conductor nominal cross sectional area 25 Sqmm 3.5 core for working voltage upto including 1100 volts conforming to IS-7098 (Part-I) 1988 (Compaction Conductors shall be shaped and arrangement for the same shall be on the cable), including taking out existing cable, complete all as specified & directed by Engr-in-Charge and as directed.

Supply & replacement of exisitng unserviceable XLPE insulated screened and PVC sheathed armoured electric power LT cable heavy duty with aluminium conductor nominal cross sectional area 16 Sqmm 2 core for working voltage upto including 1100 volts conforming to IS-7098 (Part-I) 1988 (Compaction Conductors shall be shaped and arrangement for the same shall be on the cable), including taking out existing cable, complete all as specified & directed by Engr-in-Charge and as directed.

Supply and fixing in replacement 1100 volts grade, heavy duty cable, PVC insulated stranded, aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections, one twin core cable flat or circular stranded conductor size of 10 Sqmm, 2 core complete all as specified and directed by Engineer-in-Charge.

Supply and fix (in replacement) of existing unserviceable 25 LED new generation post top, energy saving, environmental friendly light fittings, long life aesthetically designed with symmetrical light distribution spun aluminium landscape luminaire with high power LEDs as light source including necessary electric connection alongwith 40mm dia GI pipe 2.5 metre long, complete all as specified and directed by Engr-in-charge.

Supply and fix (in replacement) of existing unserviceable driver for LED fittings of capacity, 30 watt, complete all as specified and directed by Engr-in-charge.

Supply and fix (in replacement) of existing unserviceable driver for LED fittings of capacity, 45 watt, complete all as specified and directed by Engr-in-charge.

Supply and fix (in replacement) of existing unserviceable driver for LED fittings of capacity, 60 watt, complete all as specified and directed by Engr-in-charge.

Supply and fix (in replacement) of existing unserviceable driver for LED fittings of capacity, 72 watt, complete all as specified and directed by Engr-in-charge.

Painting to existing steel tubular LT poles, 9/11m long including cross arms, channels, angle iron support, bracings, clamps etc. with two coats of aluminium paint superior quality of approved make on surface expose to view and making 30 cm wide strips (total 5 Nos) with white and black paint alternatively on external surface above PCC benching including prepration of old painted surface by scraping complete all as specified and directed by Engr-in-Charge.

Cutting of existing road/floor/plinth/drain for taking out/laying of UG cable through GI pipe including necessary earth work, excavation and making good to match with existing surface with PCC M-10, type C1 ( using 20mm graded stone aggregates ) complete all as specified complete all as specified & directed by Engr-in-Charge.

Timer switch box, fabricated out of 16 SWG CRCA sheet with mounting and locking arrangement, duly powder coated including grouting in PCC, M-7.5 ( 30 cm below ground level and 30 cm above ground level ) complete all as specified & directed by Engr-in-Charge and consisting of following :- (a) Timer Make: L&T/Havells - 01 No (b) Power contactor 100 Amps, FP Make: L&T/Havells - 01 No. (c) Connector, 100 amps, 415 volts - 03 Nos. (d) MCCB, FP 100 amps, 451 volts - 01 Nos. (e) Control fuse, 10 amps - 01 Nos

Cutting/trimming tree branches along the over head HT/LT lines up to 2.0 mtr from electric line on both sides of the span and disposing of the cut tree/branches at places complete all as specified and directed by Engineer-in-Charge.

malghotra construction co

M/S Vijay Punj Constructions

Mahashakti Enterprises

ess are electricals and electronic

KISHAN CONTRACTOR