Widening and Strengthening of Link Road from Ballana to Punjab Border (ID 5088) (Village Lohsimbly) in District Ambala (1700 Mtr). (Pdg. Street Light).

Amount

Wire 1.5 Sqmm ISI marked, FRLS PVC insulated, single core copper conductor cable. EL003

10 Sqmm ISI marked, FRLS PVC insulated, single core copper conductor cable. EL007

M.S Pipe 65mm dia, EL 272

M.S Pipe 40mm dia, EL 274

MCCB ,DISTRIBUTION BOARDS, MCB's, RCCB's, CHANGE OVER etc. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. TRIPLE POLE MCCB 16 to 100 Amp HSR No. 23.22.1.3

4 pole MCCB 6 amp to 100 amp HSR No. 23.22.1.9

MCCB Enclosure made of Sheet Steel suitable for mounting MCCB of following ratings MCCB up to 125 A FP HSR No. 23.22.2.1

Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to to the entire satisfaction of the Engineer-in-Charge of the work. Vertical TPN DB Double Door 4 way ( 8 incoming and 3phase*4 outgoing) HSR No. 23.22.4.9

Supply and erection of miniature circuit Breaker/isolator 240/415 V in the existing distribution board including making necessary connections:- 6 amp. to 32 amp Single Pole HSR No. 23.22.5.1

6 amp. to 32 amp MCB's TRIPLE POLE HSR No. 23.22.5.5

Supply and election of Goodridge Almirante type M.S. pedestal made of 50 mm *50 mm * 6 mm angle Iron frame with 3.00 mm thick M.S. sheet covering including shutters with suitable hinges and looking arrangement with the Godrich type handle including round bars. The to covering should have a downward overhang of 75 mm on all sides of pedestal, having two sets of water proof ventilation holes of suitable size on the sides, at top and bottom, each set containing four No’s. holes to discharge the heat produced by suitable size to make it water proof . The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embedded upto the entire depth in 1:2:4 cement concrete block, projected 75 mm all around the pedestal and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in charge of the work. M.S. pedestal of size 750 mm wide, 900 mm high, 300 mm deep and bottom totally open , duly embedded in cement concrete block of size 900 mm*450 mm*200 mm above ground level , having a base of size 1050 mm* 600 mm* 250 mm below ground level. HSR No. 23.27.2

CHAPTER 24.0 - CABLE LAYING AND STREET LIGHTING EARTHING AND LIGHTENING ARRESTOR Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required. HSR No. 24.1.1

Extra for using salt and char coal/coke for pipe earth electrode as required. HSR No. 24.1.2

Providing and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required. HSR No. 24.1.11

Providing and fixing 4.00 mm dia G1. Wire on surface or in recess for loop carthing as required. HSR No. 24.1.13

Laying of underground cable in pipe /existing open/closed tench tc as required:- 16 Sq mm to 35 sqmm 2 to 4 Core HSR No. 24.2.4.2

Supply and erection of copper lugs including crimping etc. entire satisfaction of Engineer-in- Charge of the work. 1.5 sqmm HSR No. 24.2.6.1

10 sqmm HSR No. 24.2.6.5

Supply and erection of suitable compression type brass cable glands for underground Cable :- 10 sqmm to 16 sqmm Cable 2 to 4 Core HSR No. 24.2.7.2

25 sqmm to 50 sqmm Cable 2 to 4 Core HSR No. 24.2.7.3

Supply and erection of aluminium lugs heavy duty including crimping etc. upto the entire satisfaction of the Engineer-in-charge of the work. 16 sqmm HSR No. 24.2.8.4

25 sqmm HSR No. 24.2.8.5

Erection of street light fitting on the pole including the cost of petty material required (irrespective of height/length of bracket) At Pole above 4.5 metres but upto the height of 7 metres. HSR No. 24.4.4.2

Supply of Hot Dip Galvanized octagonal pole of 3mm thickness, with base plate including cost of nut and bolts , earthing studs, Integral Cable termination arrangement 5 mm thick Bakellite base plate on suitable welded MS/GI bracket 32 A four way connector 2 no 10 A SP MCB , end cover and all accessories as supplied by the manufacture 7 Mtr Long pole with top dia 75 0mm and bottom dia 150 mm with base plate of size 300 x 300 x 20 mm HSR No. 24.4.8.5

S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Mtr below ground level including diging and refilling of earth including cost of suitable size socket/cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 63/50 mm outer dia/inner dia HSR No. 24.5.2.3

RCC FOUNDATIONS FOR OCTAGONAL POLES Providing RCC foundation of M25 grade (1 Cement:1 Stone aggregate: 2 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @ 70 kg/cum of concrete contents, concrete cover 50mm, anchor bolts etc. over a bed of PCC 1:5:10 of required dimensions for octagonal poles of various heights as per following specifications complete in all respects and as per directions of Engineer-in-charge 7m high pole HSR No. 24.8.5

S/Eof under ground cable ,loose in existing pipe or trenches complete with necessary connections . Supply & Erection of 16 Sq. mm 4 Core Cable Armoured under ground cable ,loose in existing pipe or trenches, make Grandlay complete with necessary connections complete in all respect including all material required to complete the job in all respect & up to the entire satisfaction of the Engineer in charge of the work . NS-1

Supply & Erection of 25 Sq. mm 4 Core Cable Armoured under ground cable ,loose in existing pipe or trenches, make Grandlay complete with necessary connections complete in all respect including all material required to complete the job in all respect & up to the entire satisfaction of the Engineer in charge of the work . NS-2

S/E of 40 mm diameter 1.5 mtr Long Singla GI bracket (B - Class) with GI collar0.50 mtr. long of suitable size to fit on octagonal pole with top dia 70 mm including necessary nut and bolt etc. required for fixing of bracket on top of 8 Mtr. long octagonal GI pole duly painted with aluminium paint as per detail drawing attached making necessary connection with all labour and material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of work. Single Bracket NS-3

Supply and erection of 72 watts LED street light Warm White with all labour and material required to complete the job in all respect upto entire satisfaction of Engineer-in-charge of work (Make Bajaj/ Havells/ Crompton/ Wipro / Surya / Philips). NS-4

S/E of 63 amp. 3 Pole/230V Astronomical automatic time switch of Indo Asian make Cat No. TL065ASO alongwith contractor of required capacity movement controlled by precisaty quartz oscillations operation on main supply of continue to run on built in rechargeable nicket cadium cell for 150 hours in the event of power failure including cost of contractor complete in all respect upto the entire satisfaction of Engineer-in-charge of the work. NS-5

M/S GARG ELECTRICAL