SPECIAL REPAIRS TO BLDG NO. T-22 SINGLE OFFICERS ACCN NEAR OFFICER MESS AT K AREA CHANDIGARH.

Amount

Demolition of brickwork or stone/ boulders masonry, built in cement mortar or cement lime mortar incl all quoins, arches, pillars etc but excluding aslar facing etc complete all as specified

M & L for Brickwork with fly ash modular bricks in cement mortar, straight or curved on plan exc 6m mean radius, built in in CM 1:6 all as specified.

Dismantling expanded metal, any thickness or mesh not exc 4kg, fixed with steel or wood fillets, if any

Demolition of RCC roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work

M & L for Roof trusses (framed), trussed, purlins, Fe 410-W (Gde-E- 250) quality-A, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc

S&F 12mm dia 100 mm long dash through fasteners bolts fixed in concrete or brick work to hold cleats for purlins etc complete all as specified.

Rendering 10mm thick in CM 1:3 on fair faces of brick work or concrete surfaces, to repair RCC trusses, stuts etc complete all as directed

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Taking down cement plaster on brick or Conc surfaces, etc. including raking outjoints, hacking for key, scrubbing down with water, etc.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in CM (1:4) finished fair and even without using extra cement

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in CM (1:6) finished fair and even without using extra cement

M&L for two coats of Oil bound distemper over 2mm wall care putty on wall incl preparing new plastered surfaces on wall.

M&L for comple removal of existing treatment and applying two coats of Oil bound distemper over 2mm wall care putty on wall incl preparing old plastered surfaces on wall.

M&L for finishing Old/New plastered surfaces of walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L for light shade Virified Ceramic tiles 8-9 mm thick, Double charged (Premium quality) (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over cement screed base 15mm thick in CM 1:4 laid and jointed over complete all as specified

All as per item No 18 above but for skirting/ dado over 10mm thick rendering in CM 1:4.

S&F Non - skid Ceramic colour tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm (Premium quality), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over cement screed base 15mm thick in CM 1:6 laid and jointed over complete all as specified

S & F of coloured Glazed ceramic Tiles in vertical surfaces 450 x 350 x 7 mm thick (Premium quality), over 10 mm thick rendering on fair faces of brick work or sqm concrete surfaces in cement mortar 1 :4, set jointed in neat cement slurry and pointed in white /coloured cement to match tiles. Complete all as specified directed

Demolition of Concrete of any description and in any position not otherwise specifically provided for, below or above ground level (un-reinforced)

M&L for Cement ConcreteTye C2 1:3:6 (40mm graded crushed stone aggregate) 50mm thick as in Plinth protection/ Sub base complete

Taking down Chowkats or frames not exc 1.5 sqm each but with shutters (without taking off shutters from the frames) complete all as specified

Taking down Chowkats or frames exc 1.5 sqm but not exc 4.00 sqm each but with shutters (without taking off shutters from the frames) complete all as specified

Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge

Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in-Charge. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S&F Providing and fixing factory made uPVC area not exceeding 2.00 sqm each white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.)

S & F factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S&F 200mmAluminium anodised, barrel tower bolts of extruded section and fixed

S&F 250mm Aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F 150mm Aluminium handles, cast type anodised complete all as specified

S&F 5.5mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5sq. m in each pane

All as per item No. 33 above but exc 0.5 sqm in each pane

Dismantling of wall and ceiling board any type and in any position

M&L for providing and fixing PVC insulation panels 10mm thick with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling board over powder coated Gl frame work 605mmx605mm for false ceiling comprising of Gl perimeter Angle size 25x25x 0.70 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate Tee size 0.70 mm thick having flange of 25 mm and web of 38 mm , frame grid suspended from soffit of ceiling at upto 900mm centre to centre or adjustable as required at site with 4 mm Gl wire hangers fixed/tightened with ceiling with the help of nylon sleeve/rawal plugs complete all as specified and directed .Note: Ceiling to be provided in double layer design as approved by GE.

Proving Cement concrete in roof kerbs rounded or chamfered on edges tye C-1 (1:3:6) 20mm graded crushed stone aggregate

S&F solid PVC door frame of size 50mmx47mm made out 5mm plain colour PVC sheet reinforced with MS square tube made as per specification and drawing. (Make : Sintex/Rajshree/Accucell)

M&L for Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing at site as per specification & drawing.

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store

S&F 15mm bore medium grade tubes, galvanized with all fittings and fixed complete to walls and ceiling or laid in floors

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store

S&F 20mm bore medium grade tubes, galvanized with all fittings and fixed complete to walls and ceiling or laid in floors

S&F Chromium plated Towel ring fancy type complete all as specified, Make: Jaguar/Marc/Prayag.

S&F Chromium plated Jet Spray (Butterfly) with 1.5mtr tube, complete all as specified.Make: Jaguar/Marc/Prayag.

S&F in repair Chromium plated square shower roses 6" over head with 300mm with flange fancy type, including fixing to steel pipe or union, Make: Jaguar/Marc/Prayag.

S&F Cromium plated soap dish with chromium plated brass screws in Bathrooms and for wash hand basins. Make: Jaguar/Marc/Prayag.

S&F in repairs One piece EWC with soft close seat cover and twin flush fittings 660 x365 x765mm complete set. Make :- Cera (Clayton), Cat No. 2043 or equivalent.

S&F in repair Chromium plated Brass 2 in 1 health faucet with hook 1 mtr tube all as specified and directed by Engr-in-charge. Make: Jaguar/Marc/Prayag.

S&F in repair fancy type Tabular Tawel Rail 20mm dia, D type 60cm long between flange

S&F in repairs chromium plated (CP) toilet paper holder complete all as specified and as directed.

M&L for Granite 20 mm thick (of any tpe) work (table rubbed and polished) in WHB platform, steps, jambs, pillars, window cills,cooking platforms and like incl rounding or bullnosing the exposed edges over 15 mm thick screed in CM 1:3, complete all as specified

S&F in repair glass corner shelf, one set comprises of three pieces of corner shelf fancy type (small to large) 250 x 250mm, 200 x 200mm, 150 x 150mm) with all fittings,complete all as specified.

M&L for PCC in foundation Type-C2 (1:3:6), filling and mass conctere in walls or retaining walls, any thickness, size or shape including pillsters, buttressed columns, pillars, bounday pillars and post (including caps and bases) complete all as specified and directed.

M&L for Reinforced cement concrete 1:2:4 type B0(12.5mm graded aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including necessary formwork as required

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed) not less than 0.9mm dia or securing with clips complete

M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide

S&F in repairs Belmonte Ceramic Vitreous China wash basin oval shape Table Top/over Counter vessel 500 x 380 x 120mm with CP waste coupling & pipe complete all as specified and directed by Engr-in-Charge.Make: Jaguar/Marc/Prayag.

S&F in repairs 15mm dia Brass CP centre hole mixer without popup waste system for mixing hot & cold water screwed down for iron pipe in wash hand basin and fixed. Make: Jaguar/Marc/Prayag.

S&F in repair Wall mixer with L Bend (Provision of OH Shower) cvomplete set with fittings, Make: Jaguar/Marc/Prayag.

S&F Hand shower with 1.5 mtr Flexible tuve and Holk, Make: Jaguar/Marc/Prayag.

S&F in repairs 15mm bore CP angle cock/Stop valves fancy type,screwed down,high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixedcomplete all as specified and directed.Make: Jaguar/Marc/Prayag.

PVC connections 15mm size with PTMTnuts of length 450mm

S&F in repairs long body Bib taps 15mm with long nose with flange , cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed. Make: Jaguar/Marc/Prayag.

S&F in repairs CP Conceled stop cock 15mm dia complete set with fittings, Make: Jaguar/Marc/Prayag.

S &F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet used instead of plain colour sheetinclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing

S&F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid,bedded and pointed in any mortar complete all as specified

M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick (coloured), set, jointed and pointed in neat cement slurry with grey cement and pigment in floors over and including 15mm screed bed in CM 1:4 complete all as specified and as directed.

Dismantling of PVC water storage tanks capacity 500 to 1000 Ltrs.

S&F rotational moulded polyethylene (tripple Layer) water storage tanks 500 Ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I,complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving n.exc 15cm thickness (below or above ground level) complete all as specified and as directed

M&L for 60 mm thickness machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of M-35 Grade, laid over and including 50mm thick sand cushion complete all as specified and as directed.

Taking down carefully aluminum/copper point wiring (light, fan, socket or power) complete along with fittings such as switches, ceiling roses, bell, regulators sockets etc, and removing from site and making good distribut surfaces of walls, floors etc all as directed.

Taking down existing unserviceable MCB DB/TPN along with MCBs complete by disconnecting all as directed.

Taking down existing unserviceable T/light fitting & box type fitting.

Taking down existing unserviceable sub main wiring 2.5 Sqmm aluminium cable all as directed.

M&L for Point wiring with 1.5Sqmm copper conductor FRLS (multistrand) PVC insulated ISI marked unseathed cable PVC insulated ISI marked unseathed FRLS dolly in existing concealed/surface conduit including concealed in wall, modular MS Box, 1.6mm thick with modular cover plate with frame as required at site suitable for modular switch, socket, fan regulator, bell push, two way etc for the One light point controlled by one way 5 Amps switch. NOTE : (i) Modular switch socket fan regulator shall be measured and paid separately under respective items. (ii) Cost of mudular MS Box, codular cover plate an frame of any modules as required at site and as directed by engineer-in-charge is deemed to be included in the quoted rates.

All as per item No 80 above but One ceiling fan/exhaust fan point controlled by one, one way 5 Amps switch

All as per item No 80 above but One 3 pin socket outlet 5 Amps on independent board

All as per item No 80 above but One 3 pin socket outlet 5 Amps on same board

All as per item No 80 above but One Bell point controled by one bell push on same board with other switches or on independent board.

M&L for Point wiring complete with 2.5 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor, drawn through and including rigid non metallic PVC conduit and conduit accessories fixed on surface of wall/ceilings or concealed etc., including provision of PVC insulated 2.5 Sqmm FRLS cable with copper conductor for earth continuity and connected to common earth dolly and metal boxes concealed in wall , modular cover plates with frames on top for housing the switches, socket outlet etc., all as specified and as directed for one switch socket outlet 16 Amps on independent board.

M&L for Sub main wiring/power wiring complete with two runs of 2.5 Sqmm, single core, PVC insulated, unsheathed FRLS cable, 1100 Volts grade, multistranded with copper conductor, drawn through and including suitable size of rigid non metallic PVC conduit pipe and accessories on surface wall/floors/concealed etc. with one run of PVC insulated, 2.5 Sqmm FRLS copper conductor for earth continuity all as specified and as directed. MAKE : Polycab / Finolex / havells NOTE :- Two runs of main copper conductor, one run of copper conductor for earth continuity and one run of conduit shall be measured as one unit length.

Supply & Fixing 5/6 Amps 1 way one modular switch complete.

Supply and Fixing 5/6 Amps three pin socket modular complete.

Supply and Fixing 15/16 Amps one way one modular switch complete.

Supply and Fixing 15/16 Amps three pin socket modular complete.

Supply and Fixing step type electronic fan regulator of capacity 100 watts 230 volts for ceiling fan flush type.

S&F bell push 5 Amp flush modular type.

Supply and Fixing Ceiling rose 3 terminal 5 Amps 230 volts PVC/Polycarbonate, insulated body.

S&F Ceiling mounted Slim design LED ceiling POP Down indoor light LFD 3D (double color) with Superior light output and internal driver 06 Watts 230 volts with internally pre-wired and including connecting up with two core twisted flexible copper conductor cable with suitable size compelte all as specified and directed by Engineer-in-Charge.

S&F Ceiling mounted Slim design LED recessed round Downlight cool white with Superior light output and internal driver 18 Watts, 230 volts with internally pre-wired and including connecting up with two core twisted flexible copper conductor cable with suitable size compelte all as specified and directed by Engineer-in-Charge.

S&F hybrix HQ LED Decorative flexible strip light ceiling Double Row water proof IP67& Flexible with free AC Adaptor plug and Connector, 220V, AC, Super bright blue, Pink color Recessed Ceiling lamp.

S&F MCB DB, SPN, 12 way with 200 Amps rated copper bus bar with mild steel sheet enclosure, vertical, double door type suitable for fixing MCBs including connecting etc. complete all as specified and as directed.

S & F in repars MCB, SPN, 240Volt, 63 Amps, breaking capacity 10 KA, Complete all as specified

S & F in repairs MCB, SP, 240Volt, 5 to 32 Amps, breaking capacity 10 KA, Complete all as specified

Disconnection and removing the u/s light fitting and S&F LED Batten box type made of CRCA sheet including 1X20 watt retro LED tube rods and pre-wired with high efficiency electronic driver and connecting with three core PVC copper flexible cable of size 23/.0076 from ceiling rose to connector block complete all as specified.

S&F in repir LED Mirror light fitting complete made out of CRCA Sheet including 1x10watt LED rod complete connecting up with three core pvc copper flexible cable of size 23/.0076 from ceiling rose to connector comlete all as specifid and as directed by Engr in charge.

S&F batten holder bakelite complete all as specified (ISI Marked).

Disconnection and removing the u/s LED lamp and S&F LED lamp 9 watts complete all as spfd and directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with blades, and frame and louvers

S&F New Copper Pipe of 15mm dia (half inch) and connecting alongwith Insulation Sleeves to the existing position incl leak testing complete all as directed by Engineer in charge.

S&F New Copper Pipe of 10mm dia (quarter inch) and connecting alongwith Insulation Sleeves to the existing position incl leak testing complete all as directed by Engineer in charge.

Dismantling the earth chamber, Excavation and removing the u/s earthing materials along with u/s and M&L for earthing complete with galvanized steel earth plate, electrode 60cm x 60cm x 6.0mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 2.25 mtr below normal ground level, connected to GI wire 4cmm dia as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel, connected to earthing test point, earth plate electrode surrounded by mixer of common salt and charcoal dust, including 20mm dia GI watering pipe ‘medium grade’, GI protection pipe of size 20 mm dia upto 7.5 mtr length , funnel with wire mesh, earthing chamber with cement concrete (1:2:4) type B-1, RCC chamber cover 80mm thick (1: 1 ½ : 3) type B1, excavation & earth work all as shown in electrical plate No 5 of SSR (Part-I) and testing on completion, complete all as specified and directed.

Supply, Laying and testing underground XLPE PVC insulated armoured heavy duty electric cable with aluminium multi-stranded conductor 1100 volts grade, 3.5 core, 25 Sqmm.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out . Note : Excavation shall be caried out manually. Exc with JCB will is not permitted.

Returning, filling in including spreading levelling, watering, and well ramming in layers not exc. 25 cm in soft/loose soil.

Removing excavated materials not exc 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point.

M & L for sand filling using approved clean dry sand for cushioning of under ground cables incl spreading levelling and well ramming in layers not exc 25 cm.

Supply and laying of class 'B' bricks for under ground cable protection as directed by Engineer- in - charge

OJHA ENTERPRISES

dhiraaj construction company

jaswant singh

DHIMAN AND SONS

SATNAM SINGH CONTRACTOR & BUILDER

shree balaji builders

M/s Super Trading Corporation