Construction of Office block, Staff rest room and Sub-store for Melt, Mould shop & WFPS at RWP/Bela

Item Breakup - A1-Schedule-A1

Sub-Soil Investigation work for two No of boe Job hole each of depth 15.0m as per relevant BIS code. (Submission of report in Three Copy) & Preparation of GAD, PHE drg & Structural design and drawing with Proof checking Work from Govt Engg college for proposed Construction of new WFPS office adjacent to toilet block near RT shop at RWP/Bela. (Area of project is 400 Sqm (Gr floor = 200 sqm + First floor = 200 Sqm) as per supplied sketch. (Submission of drawing & proof cheking report in Three Copy )rate including all taxes. @ 2% of the estimated value lump sum - 489335 Total 489335.00

Item Breakup - A2-Schedule-A2

Providing & fixing touch less automatic soap Each dispenser. The item includes the rate of two sets of 9x Battenes (oue set= 1.5x6nos Duracell everradey or equivaient Batteries). The capacities of dispenser is 0.8 litres. The body of dispenser is of Alum./ABS(model No- SDR-BLC-DJ0160As) of jaguar GRUHE & KOHLER make or equivalent. The item also includes the rate of three fittings pouches of 750ml capacity ofliquied shop of Detol/Lifeboy along with dispenser inclusive complete item, nothing will be paid what so ever the case may be manufactures Guarantee card and purchase bill to be deposited with the costodiah

Providing & fixing C.P Brass long body bib Each cock of 15mm dia of jaguar make (CoN- 107KN) or equivalent make 1st marked including all lead, lifting at any height, loading, unloading ail taxes, charges, all L&M, T&P as a complete job

Providing & fixing jaguar make corner glass Each shelf (with bracket) (Codi-CAN-3 1173) including all lead, lifting at any height, loading, unloading, all taxes, charges, all L & M, T & P as a complete job.

Providing & fixing C.P grating Jali 127mm of Each camry make (code: sk DF-05 4 sanitreking dx flat cut) including all Head, lifting at any height, loading, unloading, all taxes charges, all L & M, T & P as complete job.

Item Rate for P&F Washbasin JAQUAR FLS- Each WHT-5935 with Bottle Trap ALD-CHR- 7691300X190 32mm & Waste Coupling ALD705.Including all necessary 5 fittings and accessories, including all lead, lifting at any height, loading, unloading, all taxes, charges, all L&M, all T&P as a complete job. Nothing extra will be paid whatsoever the case may b

Providing & fixing Health flowset on wall hear Each by WC pan of parkol jaguar/mark make with min. mtr PVC tube & wall horn 15mm dia in appd colour and shape 6 including all fittings all screw, nails, plugs etc. All loading, unloading, leading, lifting all heights, all taxes, charges, all L & M, T & P compl RWPBELA HQ-ENGINEERING/RWP/BELA

Providing & fixing C.P Brass angle valve of Each 15mm dia jaguar make (CON 7053KN)or equivalent make 1st murked loading, unloading, unloading, all taxes, charges all L & M, T & P completed job.

Providing & fixing hanging wc Italian type Each with concealed cistern with s.s 8 button of superior quality, including all lead, lift at any height, loading, unloading, all taxes, charges, all L&M, T & P as a complete job.

Item Rate for Providing and fixing 600x1200 Each vetrified tiles, thickness to be specified by manufacture of make RAK/Somani/kajaria conforming to IS:15622 of manufacturers approved by railway in all colours, shades, design and abrasion resistance class as approved by the Engineer-in-Charge in floors and landings over 20 mm thick bed of cement mortar 1:4 (1cement: 4 coarse sand) with 3.3kg/sqm cement slurrey including pointing in white cement mixed with pigment of matching shade, The tiles must be cut with the zero chipping diamond cutter only, Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily complete.Item includes all leading, loading and lifting to the desired height. All Taxes are included and nothing extra to be paid whatever the case may be. " Total 1421480.71

Item Breakup - A3-Schedule-A3

Godrej Table Model T-9 or Similar

Godrej Bravo Mid Back Chair or Similar

Godrej Bravo Visitor Chair or Similar

Godrej Bravo Visitor Chair Model CH-7 or Numbers 32.00 Similar

Steel Almirah Total 1828131.15

Item Breakup - A4-Schedule-A4

Supply of 12 LOCKER ALMIRAH, Over all size Numbers 18.00 78" Height x 36" width x 19" Depth Individual Compartment: 17" Height x 12" Width x 18" Depth. Material & Construction Material: Built from high-quality Mild Steel (CRCA) sheets. Thickness: Generally 0.6 mm to 0.8 mm for the main body and 0.8 mm to 1.0 mm for the doors to ensure durability. Finish: Finished with a powder coating( shown here in blue and grey) that provides resistance against rust, corrosion, and scratches. Locking System: Equipped with individual inbuilt cam locks or staples for external padlocks to secure personal items. Total 540000.00

Item Breakup - B1-Schedule-B1

Item Breakup - B2-Schedule-B2

of 88 mm, weighing not less than 190 gms. 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 18.7 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. ( Internal work - Exposed on wall ) 60 18.7.1 15 mm nominal dia Pipes Metre 370 286.8 106116 61 18.7.5 40 mm nominal dia Pipes Metre 100 702.95 70295 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of 18.8 pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 62 18.8.3 25 mm nominal dia Pipes Metre 150 627.25 94087.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This 18.9 includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 63 18.9.3 25 mm nominal dia Pipes Metre 300 355.4 106620 18.15S BRASS FITTINGS Providing and fixing uplasticised PVC 18.21 connection pipe with brass unions : 18.21.2 45 cm length 64 18.21.2.1 15 mm nominal bore Each 56 97.75 5474 RWPBELA HQ-ENGINEERING/RWP/BELA Providing and fixing C.P. brass shower rose 18.22 with 15 or 20 mm inlet 65 18.22.2 150 mm diameter Each 2 222.35 444.7 C.I. SLUICE VALVES/ FIRE HYDRANTS & 18.31S FIXTURES 18.48 Providing and placing on terrace (at all floor Per Litre 26000 11 286000 levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable 66 locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.49S C.P. BRASS FITTINGS Providing and fixing C.P. brass stop cock 18.52 (concealed) of standard design and of approved make conforming to IS:8931. 67 18.52.1 15 mm nominal bore Each 4 670.45 2681.8 Providing and fixing C.P. brass angle valve 18.53 for basin mixer and geyser points of approved quality conforming to IS:8931 68 18.53.1 15mm nominal bore Each 6 574.3 3445.8 18.54S PTMT FITTINGS Providing and fixing PTMT pillar cock of 18.56 approved quality and colour. 18.56.1 15 mm nominal bore, 107 mm long, Each 28 208.45 5836.6 69 weighing not less than 110 gms Providing and fixing PTMT grating of 18.58 approved quality and colour. 18.58.1 Circular type 70 18.58.1.1 100 mm nominal dia Each 25 37.6 940 18.59S AIR VALVE & WATER METER (BULK TYPE) Providing and fixing PTMT Ball cock of approved quality, colour and make complete 18.62 with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 18.62.3 25 mm nominal bore, 152mm long, weighing Each 4 523.8 2095.2 71 not less than 440 gms 18.62.4 40 mm nominal bore, 206mm long, weighing Each 4 737.2 2948.8 72 not less than 690 gms Providing and fixing PTMT extension nipple 18.75 for water tank pipe, fittings of approved quality and colour. 18.75.1 15 mm nominal bore, weighing not less than Each 30 53.6 1608 73 32 gms Cutting holes up to 30x30 cm in walls 18.76 including making good the same: 18.76.1 With common burnt clay F.P.S. (non modular) Each 6 416.8 2500.8 74 bricks 21.0 ALUMINIUM WORK 21.1S General RWPBELA HQ-ENGINEERING/RWP/BELA Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM 21.1 rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.1 Anodised aluminium (anodised transparent Kg 320 495.05 158416 or dyed to required shade according to IS: 75 1868, Minimum anodic coating of grade AC 15) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings 21.1.2 wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.1 Anodised aluminium (anodised transparent Kg 300 598.6 179580 or dyed to required shade according to IS: 76 1868, Minimum anodic coating of grade AC 15) Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene 21.3 gasket etc. complete as per the architectural drawings and the directions of engineer-in- charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.2 With float glass panes of 5 mm thickness Sqm 110 1505.25 165577.5 77 (weight not less than 12.50 kg/sqm) 21.13 Providing and fixing Brass 100mm mortice Each 200 528.85 105770 latch and lock with 6 levers without pair of 78 handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. 22.0 WATER PROOFING 22.1S General RWPBELA HQ-ENGINEERING/RWP/BELA Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in- charge to required slope and treating 22.7 similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in- charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. "All above operations to be done in order and as directed and specified by the Engineer-in- Charge : 22.7.1 With average thickness of 120 mm and Sqm 670 1684.6 1128682 79 minimum thickness at khurra as 65 mm. 26.0 NEW TECHNOLOGIES AND MATERIALS 26.1S General RWPBELA HQ-ENGINEERING/RWP/BELA Providing & fixing false ceiling at all heights w ith GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC 0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33 mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross- 26.26 T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L- shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. 26.26.1 With semi perforated 12 mm thick micro Sqm 400 1852.05 740820 80 tegular edged GRG false ceiling tiles. Total 25733568.41

Item Breakup - B3-Schedule-B3

Item Breakup - B4-Schedule-B4

Item Breakup - B5-Schedule-B5