Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.7 LAccepted-Finance VILAGE WARD NO 7 NALAGARH TEHSIL NALAGARH DISTT SOLAN HP | L1 | Accepted-Finance Lowest bidder | |
| 2 | L2₹2.9 L+₹21,424.50 (7.97%)Rejected-Finance M S ASHAPURI INFRACON PVT LTD VILLAGE AND PO HURLA TEHSIL BHUNTER DISTT KULLU H P | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹3.0 L+₹28,635.30 (10.7%)Rejected-Finance VILLAGE P O HARIPUR SANDHOLI TEHSIL BADDI DISTT SOLAN HP | SOLAN | HIMACHAL PRADESH | 171102 | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹3.4 L+₹74,848.10 (27.8%)Rejected-Finance VILLAGE BALI PO BEHLI TEHSIL NIHRI DISTT MANDI HP | MANDI | HIMACHAL PRADESH | 175001 | L4 | Rejected-Finance Other than lowest |
| Sl No | Description | Qty | Unit | KAMAL KUMAR L3 | ANKUSH VERMA L4 | Kuldeep Chand L1 | YASH PAL L2 |
|---|---|---|---|---|---|---|---|
| 1.00 | Excavation in foundation and trenches etc. (including pipes and pits upto all depths) in all kinds of soil such as pick work, jumper work, blasting and chiselling soft or hard rock where blasting is prohibited in all leads and lifts including trimming and dressing of sides, levelling of bed to correct grade stacking the excavated soil clear from the edge of excavation and returning the excavated soil after laying, jointing and testing of GI pipes in trenches in 15cm layers including consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated soil as directed in all leads and lifts and soring strutting and trimming dressing where ever required including restoration of un-metalled surface to its original condition including cost of diversion for traffic night signals fixing caution board, crossing over trenches for access to houses and fencing etc. complete in all respect. Pick work 80% and jumper work 20%. | 95.7 | Cum | 99 ₹9,474.3 | 3 ₹287.1 Lowest | 270 ₹25,839 | 55 ₹5,263.5 |
| 2.00 | Laying, jointing (by way of circumfrential butt welding joints by electrical arc welding) and testing of GMS pipe of following dia meters confirming to BIS 1239 (Part-I) grade specificed below (latest with upto date amendments) having wall thickness as specified below with bevelled ends and capable of withstanding required test pressure in a random length of 4 to 7meters including manufacturing reducers/tapers, all short pieces, bends etc. as per site requirement made from parent tubes. The laying of pipe will incluse all operation such as cutting, welding, jointing, fabrication of bends, tees etc. including lowering and laying in excavated trenches to ensure required level including flushing, cleaning and hydraulic testing complete in all respects to the satisfaction of the Engineer-in-charge. The fabricated bends shall have three or four cuts having its radius not less than five times the dia of pipe. The pipes shall be factory galvanized (zinc coating both inside and outside) as per relevant IS standards. The welding electrodes shall be as per IS: 814 of Advani Oerlikon/L&T or ISI marked make. The rates also includes entire carriage of material, flushing, cleaning & hydraulic testing complete to the best satisfaction & direction of the Engineer-in-charge within all leads and lifts. (Earth work in trenches will be measured and paid for separately) 150mm dia Medium grade. | 1,100 | Rmt | 210 ₹2,31,000 | 244 ₹2,68,400 | 180 ₹1,98,000 Lowest | 210 ₹2,31,000 |
| 3.00 | Providing, supplying and fixing cast Iron double flanged sluice valve as per IS:14846/2000 latest with upto date ammendments of Kirloskar / Leader / KSB / Kartar / Pelican make of following diameter, PN-1 including MS Flanges Table - 17, confirming to IS: 6392-1971 or latest with upto date ammendments including cutting of pipes wherever required, welding in three layers (leak proof) confirming to specifications as perescribed in relevant IS code i.e. IS: 816-1969 or latest as applicable with upto date ammendments with nuts, bolts, washers & specials etc. confirming to relevant IS code or latest with upto date ammendments including packing sheet i.e. asbestos fibre sheet minimum 3mm thick and painting with anticorrosive paints complete in all respect including all leads and lifts and as per entire satisfaction of the Engineer-in-charge. 150mm dia. | 3 | Nos. | 19,000 ₹57,000 | 25,000 ₹75,000 | 15,000 ₹45,000 Lowest | 18,000 ₹54,000 |
Tender Value
₹4.1 L
EMD Value
₹8,250
Closing Date
4 Oct 2025, 5:00 pmClosed
Executive Engineer
Jal Shakti Division Sundernagar
Laying jointing and testing of GI pipe 150mm dia from main delivery tank to Village Chhater in gravity main
2025_HPIPH_115893_1
EE JSD SNR TA etender 2025-9096-9120 dt. 25.09.2025
Open Tender
Civil Works - Water Works
Item Rate
60 days
Sundernagar
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
₹8,250
10 Oct 2025
25 Sept 2025
6 Oct 2025
25 Sept 2025
4 Oct 2025
25 Sept 2025
Amount
Excavation in foundation and trenches etc. (including pipes and pits upto all depths) in all kinds of soil such as pick work, jumper work, blasting and chiselling soft or hard rock where blasting is prohibited in all leads and lifts including trimming and dressing of sides, levelling of bed to correct grade stacking the excavated soil clear from the edge of excavation and returning the excavated soil after laying, jointing and testing of GI pipes in trenches in 15cm layers including consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated soil as directed in all leads and lifts and soring strutting and trimming dressing where ever required including restoration of un-metalled surface to its original condition including cost of diversion for traffic night signals fixing caution board, crossing over trenches for access to houses and fencing etc. complete in all respect. Pick work 80% and jumper work 20%.
Laying, jointing (by way of circumfrential butt welding joints by electrical arc welding) and testing of GMS pipe of following dia meters confirming to BIS 1239 (Part-I) grade specificed below (latest with upto date amendments) having wall thickness as specified below with bevelled ends and capable of withstanding required test pressure in a random length of 4 to 7meters including manufacturing reducers/tapers, all short pieces, bends etc. as per site requirement made from parent tubes. The laying of pipe will incluse all operation such as cutting, welding, jointing, fabrication of bends, tees etc. including lowering and laying in excavated trenches to ensure required level including flushing, cleaning and hydraulic testing complete in all respects to the satisfaction of the Engineer-in-charge. The fabricated bends shall have three or four cuts having its radius not less than five times the dia of pipe. The pipes shall be factory galvanized (zinc coating both inside and outside) as per relevant IS standards. The welding electrodes shall be as per IS: 814 of Advani Oerlikon/L&T or ISI marked make. The rates also includes entire carriage of material, flushing, cleaning & hydraulic testing complete to the best satisfaction & direction of the Engineer-in-charge within all leads and lifts. (Earth work in trenches will be measured and paid for separately) 150mm dia Medium grade.
Providing, supplying and fixing cast Iron double flanged sluice valve as per IS:14846/2000 latest with upto date ammendments of Kirloskar / Leader / KSB / Kartar / Pelican make of following diameter, PN-1 including MS Flanges Table - 17, confirming to IS: 6392-1971 or latest with upto date ammendments including cutting of pipes wherever required, welding in three layers (leak proof) confirming to specifications as perescribed in relevant IS code i.e. IS: 816-1969 or latest as applicable with upto date ammendments with nuts, bolts, washers & specials etc. confirming to relevant IS code or latest with upto date ammendments including packing sheet i.e. asbestos fibre sheet minimum 3mm thick and painting with anticorrosive paints complete in all respect including all leads and lifts and as per entire satisfaction of the Engineer-in-charge. 150mm dia.
YASH PAL (BID ID -565621)
KAMAL KUMAR (BID ID -564827)
ANKUSH VERMA (BID ID -565554)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .