TH E CONSTRUCTION OF BIRTH & DEATH AND OTH ER DEPT OFFIC ES AT SARDAR MA RKET VADODARA MUNICIPAL CORPORATION

Excavation for foundation including sorting out and

1 9069.00 stacking the excavated stuff up to 50mt lead for A) Cmt 120.01

Loose or soft soil

Upto 1.50 mt. depth

2 9024.00 1.50 mt.to 3.0 mt depth Cmt 133.07

Filling available excavated Earth (Excluding Rock) in

trench plinth side of foundation etc. in layer not

exceeding 20 cm in depth consolidation each deposited

layer by ramming and watering etc. complete.

Providing and laying rubble for appron (each stone

5 2116.10 weighting not less than 40Kg.) including and packing Cmt 1067.08

and filing in the interstices with quarry-spalls.

Disposal of Surplus excavated Earth and/or debris etc.

6 8879.40 including all lifts, for 400 - 500 m lead outside of Cmt 129.28

campus etc. complete.

Disposal of Surplus excavated Earth and/or debris etc.

7 13319.10 including all lifts, for 5 to 10 km lead outside of L.S 237.87

campus etc. complete.

Filling in foundation and plinth with murrum or selected

soil in layers of 20cm. thickness including watering,

ramming and consolidating etc. complete. (more than

Carring out plinth treatment to post construction /

existing structure by spraying chemical solution for

termite control treatment including labour and material

consistment with I.S.I specification. Using Chlordene

and Chiorpurfiles 20 EC. As Per 6131_paret-II

Consentration Weight one percent is recommended i.e

one litre 20 EC chemical emulsion with 19 liter give 1 %

concrentration inclusive of one litre chemical emulsion

appication at the rate of 5 Litre chemical / Sqm of

surface is recommended as per I.S

Clearing and grubbing road land including uprooting

rank vegetation grass bushes, shrubs, sapling and trees

10 0.31 girth up to 300 mm removal of stumps of trees cut Hectare 28455.09

earlier and disposal of unserviceable materials (C) By

mechanical means in area of light jungle

CEMENT CONCRETE

Providing and laying cement concrete 1:4:8 (1- Cement :

11 523.37 4- coarse sand : 8- hand broken stone aggregates 40 mm Cum 2747.21

nominal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth (upto 10 ton)

Providing and laying controlled cement concrete M.250

and curing complete excluding the cost of formwork and

12 3433.08 reinforcement for reinforced concrete work in (A) Cum 4247.57

Foundations, footings, Base of columns and Mass

concrete. (more than 10 ton)

Providing and laying controlled cement concrete M.250

and curing complete excluding the cost of formwork and

13 1001.63 reinforcement for reinforced concrete work in (B) Walls, Cum 4551.51

from top of foundation level upto floor two level (upto

Item Accoring to

but may be Item Work Unit Tender Rates

Providing and laying in position Ready Mixed M-250

grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix

manufactured in fully automatic batching plant and

transported to site of work in transit mixer for a lead up

to 10 kms having continuous agitated mixer,

manufactured as per mix design of specified grade for

reinforced cement concrete work including pumping of

R.M.C. from transit mixer to site of laying, excluding

the cost of centering shuttering finishing and

reinforcement including cost of admixtures in

recommended proportions as per IS: 9103 to accelerate/

retard setting of concrete, improve workability without

impairing strength and durability as per direction of the

Engineer - in - charge. Without Fly Ash (Min cement

level as per latest IS 456 shall be maintained) (Cement

BASEMENT & GF SLAB + BEAM

15 247.70 FF SLAB + BEAM Cum 4896.32

16 247.70 SF SLAB + BEAM Cum 4896.32

17 195.70 TF SLAB + BEAM Cum 4896.32

18 195.70 FOURTH FLOOR SLAB + BEAM Cum 4896.32

19 195.70 FIFTH FLOOR SLAB + BEAM Cum 4896.32

20 175.70 Sixth FLOOR SLAB + BEAM Cum 4896.32

21 29.04 TERRACE PARAPET WALL Cum 4896.32

22 35.06 CABIN SLAB+BEAM Cum 4896.32

Providing and laying in position Ready Mixed M-300

grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix

manufactured in fully automatic batching plant and

transported to site of work in transit mixer for a lead up

to 10 kms having continuous agitated mixer,

manufactured as per mix design of specified grade for

reinforced cement concrete work including pumping of

23 22.69 R.M.C. from transit mixer to site of laying, excluding Cum 5093.12

the cost of centering shuttering finishing and

reinforcement including cost of admixtures in

recommended proportions as per IS: 9103 to accelerate/

retard setting of concrete, improve workability without

impairing strength and durability as per direction of the

Engineer - in - charge. Without Fly Ash (Min cement

level as per latest IS 456 shall be maintained) (Cement

level 475 kg) OVER HEAD WATER TANK

Providing and laying controlled cement concrete M.200

and curing complete excluding the cost of formwork and

24 151.84 reinforcement for reinforced concrete work in (E) Cum 5453.20

Staircases excluding landing upto floor two level (more

Providing and laying cement concrete work 1:2:4 (1-

Cement : 2- Coarse sand : 4- graded stone aggregates

mm nominal size) and curing complete excluding cost of

25 14.35 formwork and reinforcement for reinforced concrete Cum 4023.57

work in (B) shelves, Balconis , Lintels, Girders and

Cantilever upto floor two level. (more than 10 ton)

R.C.C. AT SILL LEVEL

Item Accoring to

but may be Item Work Unit Tender Rates

26 14.35 1st Floor Cum 4023.57

27 10.76 2nd Floor Cum 4023.57

28 10.76 3rd Floor Cum 4023.57

29 10.76 4th floor Cum 4023.57

30 10.76 5th Floor Cum 4023.57

31 12.76 6th Floor Cum 4023.57

Providing and laying controlled cement concrete M.250

and curing complete excluding the cost of formwork and

reinforcement for reinforced concrete work in (D)

Columns, Pillars posts and struts, upto floor two level.

(more than 10 ton)

36 141.56 4th floor Cum 4628.14

37 141.56 5th Floor Cum 4628.14

38 105.05 6th Floor Cum 4628.14

39 4.32 STAIR CABIN + LIFT ROOM Cum 4628.14

Providing TMT Bar FE 500D reinforcement for R.C.C.

work including bending, binding and placing in position

complete upto floor two level

Providing formwork of ordinary timber planking so as to

give a rough finish including centering, shuttering and

propping etc. height of propping and centering below

supporting floor to ceiling not exceeding 4.00 mts and

removal of the same for in situ reinforced cement

concrete works.

A) Foundation and plinth

(B) Flat surfaces such as soffits of supspened floors

42 11608.62 slabs Landings and the like. (1) Floors etc. upto 200 mm Sqm 260.88

in thickness. (more than 10 ton)

(C) Vertical surface such as walls (any thickness)

(G) Columns PillarsPosts and struts. (1) Square

Rectangular Polygonal in plan. (upto 10 ton)

(H) (1) Sides and soffits of Beams Beam Haunchings

45 4195.72 cantilevers Girders Bressumers and Lintels not Sqm 202.18

exceeding 1 M. in Depth. (upto 10 ton)

(M) Staircase with sloping or stepped soffits including

risers and stringers excluding landing. (upto 10 ton)

(I) Edges of slabs and Breaks in floors and walls. (upto

Brick work using common burnt clay building bricks

having crushing strength not less than 35 kg./Sq.Cm. in

foundation and plinth in Cement Mortar 1:6 (1- Cement

: 6 -fine sand)(A) Modular (upto 10 ton)

In foundation and plinth

49 308.61 GROUND FLOOR. Cmt 4498.19

50 308.61 1st FLOOR. Cmt 4498.19

Item Accoring to

but may be Item Work Unit Tender Rates

51 308.61 2nd FLOOR. Cmt 4542.35

52 308.61 3rd FLOOR. Cmt 4586.52

53 258.61 4th FLOOR Cmt 4630.69

54 258.61 5th FLOOR Cmt 4674.86

55 258.61 6th FLOOR Cmt 4719.02

56 42.11 Terrace level Cmt 4763.19

(ii) Half brick masonry in common brunt clay building

bricks having crushing strength not less than

Kg/Sq.Cm. in Cement mortar 1:5 (1- Cement : 5 -coarse

sand ) in foundation and plinth (A) Modular (upto

58 214.20 1st FLOOR. Smt. 595.67

59 214.20 2nd FLOOR. Smt. 645.21

60 214.20 3rd FLOOR. Smt. 694.75

61 189.20 4th Floor Smt. 744.29

62 189.20 5th Floor Smt. 793.83

63 189.20 6th Floor Smt. 843.37

PLASTER & PAINTING

Providing 15mm thick cement plaster in single coat on

Rough (Similar)side of single or half brick walls for

interior plastering upto floor two level and finished even

and smooth in (i) Cement mortar 1:4 (1-cement:3-sand)

GROUND FLOOR. & basement

65 2607.66 1st FLOOR. Smt. 171.21

66 2607.66 2nd FLOOR. Smt. 195.18

67 2607.66 3rd FLOOR. Smt. 219.16

68 2307.66 4th Floor Smt. 243.14

69 2307.66 5th Floor Smt. 267.11

70 2607.66 6th Floor Smt. 291.09

71 447.07 T.C. AND PERAPET+ LIFT ROOM Smt. 315.07

Providing 10mm thick cement plaster in single coat on

Rough (Similar)side CEILINGs for interior plastering

72 4370.27 upto floor two level and finished even and smooth in (i) Smt. 196.64

Cement mortar 1:3 (1-cement:3-sand)

GROUND FLOOR. & basement

73 1440.27 1st FLOOR. Smt. 196.64

74 1440.27 2nd FLOOR. Smt. 220.61

75 1440.27 3rd FLOOR. Smt. 244.59

76 1440.27 4th Floor Smt. 268.57

77 1440.27 5th Floor Smt. 292.55

78 1440.27 6th Floor Smt. 316.52

79 256.49 T.C. AND PERAPET+ LIFT ROOM Smt. 340.50

20mm thick sand faced cement plaster on walls upto

height 10 metres above ground level consisting of 12mm

80 11867.46 thick backing coat of C.M. 1:3 (1-cement : 3-sand) and Smt. 337.52

8mm thick finishing coat of C.M. 1:1 (1-cement : 1-

sand) etc. complete.

Provoding and fixing Before plaster work Chicken wire

81 2560.00 mesh 16 x24 OR Fiber Chicken mesh (1meter width x Smt. 184.02

50 meter length waterproofing crack patch work and etc

82 32427.67 Applying two coats of Birla or Asian (or equivalent) Smt 40.59

acrylic lapy ( putty) & two coats of primer of approved

Item Accoring to

but may be Item Work Unit Tender Rates

brand and manufacture on new wall surface to give an

even shade including thoroughly brushing the surface

free from mortar dropping and other foreign matter and

sand papered smooth.

Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly

83 32427.67 brushing the surface free from mortar droppings and smt 80.87

other foreign matter and sand papered smooth. + Extra

over for every subsequent coat of wall painting with

plastic emulsion pain of approved brand.

Finishing Wall with weather proof exterior plastic

emulsion paint on wall surface (two coats) to give an

84 11867.46 required shape even shade after thoroughly brushing SMT 117.40

surface to remove all dirt and remains of loose powdered

materials etc comp. for all height.

Painting two coats (excluding priming coat) on new steel

and other metal surface with enamel paint, brushing,

85 1284.48 interior to give an even shade including cleaning the Smt 90.00

surface an even shade including cleanicn the surface of

all dirt, dust and other foreign matter.

P & L 24" x 24" vitrified 8 mm thick tile flooring over

20 mm (average) base of cement mortar 1:6 ( 1 cement:

6 coarse sand) on new surface or fixing on existing

flooring by adhesive material including dismentaling of

existing flooring and jointed with color cement slurry

including finised with flush pointing & cleaning the

surface etc. complete for light shade (upto 10 ton)

Providing and laying Vitrified tiles 8 to 10 mm thick , in

skrting risers of steps and dedo on 10mm thick cement

plaster 1:3 (1-cement : 3-coarse sand) and jointed with

white cement slurry

Providing and laying polished granite stone slab 12 to

mm thick in thread,risers of steps,skirting,,lift wall

cladding etc Dedo and pillars laid on 10mm thick

88 1892.32 cement mortar 1:3 (1-Cement : 3 coarse sand) and Smt 1956.17

jointed with gray cement slury mixed with including

rubbing and edge polishing and moulding etc.

complete. (upto 10 ton)

Providing and laying cement concrete 1:3:6 (1- Cement :

3- Coarse sand : 6- Graded brick bat aggregate 40mm

89 207.52 normal size) and curing complete excluding cost of Cum 3060.65

formwork in slopes terrace for area for water proofing

work as directed by EIC.

Providing and laying broken chine mosaic flooring for

terrace using 12 mm to 20 mm broken pieces of glazed

tiles to be laid over cement mortar 1:3 to plain or slope

and to be tempered to bring mortar creme out upto

surface using white cement including rounding off

junctions and extending them upto 15 cm along the

wall,clearing with water and oxalic acid and including

using water proofing material at the rate of 1 Kg./bag of

cement. etc. for water proofing work as directed by

Item Accoring to

but may be Item Work Unit Tender Rates

Preparing and applying of water soluble, nonflammable,

reactive and penetrative silane nanotechnology with

water (<1000 ppm TDS) in the ratio of 1 liter silane :20

liter water mixed with 0.5 liter acrylic copolymer

polymer compatible and stable in silane solution. Take

liter of silane nanotechnology and add in 20 liter water

in drum under manual stirring and then add 0.5 liter

acrylic copolymer under manual stirring and mix

completely. Spray apply the solution at the rate of 1 liter

per sqm on horizontal and 0.5 liter per sqm on vertical

new or old cementitious / concrete surface . (For very

dense concrete of M50 and above for bridges may not

absorb 1 liter per sq meter so reduce the water of

dilution to 1:10)Horizonal Surface

Providing cement vata (10cm. x 10 cm. size) quarter

92 960.20 round in cement mortar 1:1 including neat cement Smt 24.28

finishing, watering etc. complete.

P/F 25 mm. Thick Polished Granite kotah stone

sandwitch type platform 0.75 width & 0.70 m height

resting on single/ double polished kotah stone of 25 mm

93 88.20 thick in C.M. 1:4 with Granite stone of 25 mm thick SMT 3680.51

with cupboard shelves polished kotah stone etc. comp.

As per Architect instructions and drawing or as

directed by engineer in charge..

Providing and laying marble stone slab flooring over

20mm (average)base of cement mortar 1:6 (1-cement :

94 56.70 coarse sand) laid and jointed with gray cement slurry SMT 2191.42

including rubbing and polishing complete. (A) Marble

slab 25mm thick (upto 10 ton)

Providing and fixing Kitchen sink with C.I. or M.S.

brackets, painted white including cutting holes in walls

and making good the same but excluding fittings. (C)

Stainless steel Sink.(i) 600mm x 450mm x 150mm size

(NIRALI, HINDWARE etc..) INCL. all fittings and

fixtures etc. all complete as directed by EIC.

Provoding and fixing flush door shutters, solid core

construction with frame of first class hardwood with

cross board and face veneer or plywood face panels,

including anodised alluminium butt hinges with

necessary screws. (B) Non-decorative type and block

board core anodised alluminium butt hinges in flush

door shutters (2) 35 mm thick.

97 882.00 Laminated sheet 1.00 mm thick SQM 299.58

Providing and fixing 35 mm thick shutters for Doors,

windows and clear story windows including anodised

98 33.26 alluminium butt CUDM 4039.91

hinges with necessary screws.(A) Indian Teak Wood (1)

Providing and fixing window having extruded aluminum

Colour anodized section frame main outer size 127mm x

38.10mm 1.35mm @wt. 1.384kg/m, horizontal Four

track member size 122.20mm x 31.75mm x 1.10mm@

wt 1.20 kg/m, vertical member of size 122.20mm x

31.75mm x1.50mm @1.398 kg/mt with sliding shutters

Item Accoring to

but may be Item Work Unit Tender Rates

of horizontal member size 40mm x 18mm x 1.29mm@

0.456kg/mt ,vertical member of size 40mm x 18mm x

1.29mm @ 0.456 kg/mt with 5 mm thick transparent

bronze colour tinted float glass with powder coated

aluminum fittings and fixtures and transparent silicon

sealant glass fixing to frame as per details etc complete

Providing and fixing M.S. grills of required pattern to

wooden frames of windows etc. with M.S. flats at

100 17714.80 required spacings and frame alround, square or round KG 105.18

bars with round headed bolts and nuts or by screws (A)

Plain Grill. (upto 10 ton)

101 3500.00 Black Japan Paint used for retaining wall back side. lit 43.65

102 632.00 PVC Rubber Water Stopper 150width 15mm thick RMT 80.80

Providing and fixing PVC printed false ceiling with

flush type with alluminium frame, frame work is done

with three different sections of G.I. sheet of 24 gauge

thickness named as C, U and L. The C section is fixed

with hangers at an equal distance of 36” each and then U

section is fixed perpendicular on C section with steel

screws at and equal distance of 16” each. The complete

frame work is supported by G.I. L angle/6 mm rod

hangers from the roof and L sections is fixed all around

the wall as shown in the diagram. 5mm PVC sheet strips

of size 2 wide are fixd with counter sunk steel screws on

the U section. Further 3mm PVC sheet is stuck to these

PVC strips with solvent cement such that joining lines

are perfectly matched. P.U. putty is filled, dried and

leveled and requisite coats of primer and paint is done

on the ceiling for getting fine surface finish etc.

complete as per direction of

Engineering and charge manufacturer’s specification

104 136.00 S.S. Railing pipe 50 mm x 16 G ASIS 304 Grade rmt 1014.28

105 43.20 S.S. Rialing Sq pipe 32x32 mm x 16G ASIS 304 Grade rmt 458.78

106 416.00 S.S. Railing pipe 16 mm x 16G ASIS 304 Grade rmt 369.76

Providing and laying tactile tile (for vision impaired

persons as per standards) of size 300x300x9.8 mm

having with water absorption less than 0.5% and

conforming to IS:15622 of approved make in all colours

and shades in for outdoor floors such as footpath, court

yard, multi modals location etc., laid on 20 mm thick

base of cement mortar 1:4 (1 cement : 4 coarse sand) in

all shapes & patterns including grouting the joints with

white cement mixed with matching pigments etc.

complete as per direction of Engineer-in-Charge.

Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(A)

Loose or soft soil. 0 To 1.5 mt. Depth

Excavation for foundation for depth from 1.5 m to 3.0 m

including sorting out and stacking of useful materials

and disposing off the excavated stuff upto 50 Meter

lead.(A) Loose or soft soi. (ii) 1.5 to 3.0 mt depth

Item Accoring to

but may be Item Work Unit Tender Rates

Providing and laying cement concrete 1:4:8 (1- Cement :

4-Coarse sand : 8- Graded Brick bats aggregate 40mm

normal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth

Providing and fixing wsh down water closet (European

type, W.C. Pan) with integral P or Strap including

jointing the trap with soil pipe in Cement Mortar 1:1 (1-

Cement : 1-fine sand) (Seal and cover to be measured

and paid for separately)(A) vitreous China Pattern :(i) in

Providing and fixing chromium plated brass half trun

112 90.00 flush cock of approved quality including fixing in pipe Each 263.77

line etc. complete.(ii) 25mm dia.

Providing and fixing plastic seat and cover for wash

113 90.00 down water closer with C.P. brass hinges and rubber Each 291.33

buffers. (B) Black plastic seal and cover.

Providing and fixing Urinal of approved quality

including connection with trap and with integral

longitudinal flush pipe.(A) Squating plate pattern white

earthenware 550mm x 300mm.

Providing and fixing washbasin with single hole for

pillar tap with C.I. or M.S. brackets painted white

including sutting holes and

making good the same but excluding fittings.(A)

Vitreous China:(ii) Flat Back washbasin 550 mm x v

400mm size. (i) In white colour.

Providing and fixing C.P. brass waste for washbasin or

Providing and fixing C.P. brass waste for washbasin or

117 16.00 sink. Each 89.83

Providing and fixing 600mm x 450mm bevelled edge

mirrror of superior glass mounted on 6mm thick A.C.

118 60.00 sheet or plywood Each 854.58

sheet and fixing to wooden pluge with C.P. brass screws

Providing and fixing C.P. brass towel rail comlete with

C.P. brass brackets fixed to wooden plugs with C.P.

brass scews.(B)

600mm x 20mm size.

120 90.00 'Providing and fixing toilet paper holder. (A) C.P. Brass Each 427.99

Providing and fixing PVC SWR Nahni trap IS 14735 for

drain - 100 mm diameter with jali of the following

121 158.00 nominal diameter of self cleansing design with C.I Each 585.37

scread down or hinged grating including the cost of

cutting and making good the walls.

Providing and fixing to wall ceiling and floor 10.0 Kg.

F/Cm2 working pressure poluthene pipes of the

following outside Dia. Low densidy, complete with

special falnge compression type fittings, wall clipsetc.

including making good the wall ceiling and floor.

Item Accoring to

but may be Item Work Unit Tender Rates

Providing and laying (to level or slopes) and jointing

with stiff mixture of Cement Mortar in proportion 1:1

Salt glazed stoneware pipes including testing of pipes

and joints complete.(B) 150mm dia.

Providing and fixing S.W. gully trap with C.I. grating

brick masonry chamber and water tight C.I. cover with

125 20.00 frame of 300mm x 300mm size (inside) with standard Each 1246.92

weight.(i) Square mouth traps.(B) 150mm x 100mm size

Constructing brick masonry chamber for underground

C.I. Inspection chamber and bends with bricks having

crushing strength not less than 35Kg/Cm2 in C.M. 1:5

C.I. cover with frame (Light duty) 455mm x 610mm

intenal dimensions total weight of cover with frame to

be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of

126 10.00 frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1- Each 3660.76

cement :2- coarse sand :4-graded stone aggregate 20mm

size) foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a

floating coat of neat cement on walls and bed concrete

etc. complete.(ii) Inside dimensions 500mm x 700 mm

and 450mm deep for pipe line with one or two inlets.

Constructing brick masonry chamber for underground

C.I. Inspection chamber and bends with bricks having

crushing strength not less than 35Kg/ Cm2 in C.M. 1:5

C.I. cover with frame (Light duty) 455mm x 610mm

intenal dimensions total weight of cover with frame to

be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of

127 2.00 frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1- Each 7180.44

cement :2- coarse sand :4-graded stone aggregate 20mm

size) foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a

floating coat of neat cement on walls and bed concrete

etc. complete.(iii) Inside dimensions 600mm x 850 mm

and 450mm deep for pipe lines with three or more inlets.

Constructing Manhole with R.C.C. top slab in 1:2:4 mix

(1-cement :2-coarse sand : 4-graded stone aggregate

20mm nominal size) foundation concrete 1:3:6 mix (1-

cement : 3- coarse sand :6-Brick bats 40 + 50mm size)

inside plastering 15mm thick with Cement Mortar 1:5

(1-Cement : 5-coarse sand) finished with a floating coat

of neat cement and making channels in cement concrete

1:2:4 mix (1-Cement :2-Coarse sand :4-stone aggregate

20mm nominal size) finished smooth complete including

128 2.00 curing and festing (i) Inside size 900mm x 1200mm and Each 11042.74

1.5M. deep including C.I. cover with frame size 560mm

diameter total weight of cover and frame to be not less

than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame

(A) With 230mm thick walls of brick msonry using

brick having crushing strength not less than 35Kg. /

Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse

sand) (1) A type depth 0.90 Metre for 150mm

129 Chapter No. = 24 0.00

Item Accoring to

but may be Item Work Unit Tender Rates

Constructing Manhole with R.C.C. top slab in 1:2:4 mix

(1-cement :2-coarse sand : 4-graded stone aggregate

20mm nominal size) foundation concrete 1:3:6 mix (1-

cement : 3- coarse sand :6-Brick bats 40 + 50mm size)

inside plastering 15mm thick with Cement Mortar 1:5

(1-Cement : 5-coarse sand) finished with a floating coat

of neat cement and making channels in cement concrete

1:2:4 mix (1-Cement :2-Coarse sand :4-stone aggregate

20mm nominal size) finished smooth complete including

130 2.00 curing and festing (i) Inside size 900mm x 1200mm and Each 19349.63

1.5M. deep including C.I. cover with frame size 560mm

diameter total weight of cover and frame to be not less

than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame

(A) With 230mm thick walls of brick msonry using

brick having crushing strength not less than 35Kg. /

Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse

sand) (2) B type depth 1.50 Metre for 150mm

diameter sewer.

Constructing Manhole with R.C.C. top slab in 1:2:4 mix

(1- cement :2 coarse sand : 4-graded stone aggregate

20mm nominal size) foundation concrete 1:3:6 mix (1-

cement : 3- coarse sand :6-Brick bats 40 + 50mm size)

inside plastering 15mm thick with Cement Mortar 1:5

(1-Cement : 5-coarse sand) finished with a floating coat

of neat cement and making channels in cement concrete

1:2:4 mix (1-Cement :2- Coarse sand :4 stone aggregate

20mm nominal size) finished smooth complete including

curing and festing (i) Inside size 900mm x 1200mm and

1.5M. deep including C.I. cover with frame size 560mm

diameter total weight of cover and frame to be not less

than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame

Kg.)(A) With 230mm thick walls of brick msonry using

brick having crushing strength not less than 35Kg. /

Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse

sand) (3) C type depth 2.25 Metre for 150mm diameter

Providing and fixing cast iron steps of size 500mm x

132 30.00 150mm x 22.5mm and painting with two coats of Anti- Each 207.66

corrosive paint etc. complete.

Providing laying and jointing in true line and level

U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two

133 650.00 metre C/C or shall be concealed as directed including Rmt 72.65

necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including

cost of all materials.

Providing and fixing ball cock of approved. quality as

directed.(A) Copper Metal (i) 25mm dia.

Item Accoring to

but may be Item Work Unit Tender Rates

Providing and fixing ball cock of approved. quality as

directed.(A) Copper Metal (ii) 50mm dia.

Providing and fixing Gun metal check or non-return

fullway wheel valve.(C) 25mm dia.

Providing and fixing Gun metal check or non-return

fullway wheel valve.(E) 40mm dia.

Providing and fixing Gun metal wheel valve of

142 5.00 following diameter Each 160.05

Providing and fixing screw down bib taps of following

size.(B) Brass chromium plated screws down Bib Tap.

Providing and fixing pillar tap, capstan head, screw

downhigh pressure with screws, shanks and back nuts.

148 156.00 Providing and fixing Rubber plug for sink or wash basin. Each 17.15

Providing and fixing chromium plated, bottle trap with

necessary couplings of approved quality for wash basin.

Providing and fixing brass screw down stop tap. (A)

Providing, laying and jointing in true line and level

diametre U.P.V.C (Type B) conforming to IS 13592-

1992 with one end plain and other end socketed with

rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall

be jointed with each other with rubber lubricant, pipe

151 110.00 shall be fixed on wall using of PVC clamp of the size R.M 834.38

160 mm diametre x 210 mm length x 196 mm heigh at

every 2000 mm center to center or shall be concealed in

walls as directed including necessary fittings such as

bends, shoes etc. including testing of pipes and joints

and jointed with adhesive solvent cement including cost

of all materials.

Providing and fixing in position cowel went to pipes.(C)

Providing and fixing in position cowel went to pipes.(B)

Providing erecting and fixing double coated ISI water

tank of required capacity each with all necessary fittings

and connection etc.complete on terrace (For security-1

Providing erecting and fixing double coated ISI water

tank of required capacity each with all necessary fittings

and connection etc.complete on terrace (For security-2

Providing erecting and fixing double coated ISI water

tank of required capacity each with all necessary fittings

and connection etc.complete on terrace (For ground

Item Accoring to

but may be Item Work Unit Tender Rates

Providing erecting and fixing double coated ISI water

tank of required capacity each with all necessary fittings

and connection etc.complete on terrace (For drinking

water storage, for 1000 persons per day)

Providing laying (to level or slopes) and jointing

reinforced concrete Light duty non-pressure pipes I.S.

158 160.00 class NP2 of the following internal diameter with collars Rmt 254.89

and butt ends prepared for collar joints including testing

of joints complete.(B) 150mm

Providing laying (to level or slopes) and jointing

reinforced concrete Light duty non-pressure pipes I.S.

159 0.00 class NP2 of the following internal diameter with collars Rmt 356.73

and butt ends prepared for collar joints including testing

of joints complete.(C) 250mm

Providing & Laying (To level or slopes) & jointing

reinforced concrete light duty non pressure pipes IS

160 230.00 class NP3 of the following internal diameter with collars Rmt 882.74

and butt ends prepared for collar joints including testing

of joints complete. RCC300 dia pipe 0.7kg/Sq.cm

Constructing Brick masonry road gully chamber 450mm

x 450mm x 775mm with vertical gating complete.

Excavation for foundation including sorting out and

162 44.50 stacking the excavated stuff up to 50mt lead for A) CMT 120.01

Loose or soft soil

Upto 1.50 mt. depth

Boring holes 3.5 m deep in ordinary soil (for cast in situ

piles) and getting out the soil and disposal of the surplus

excavated soil as directed within a lead of 50 Meter for

following diameter of pipes.(iii) 300 medial mensicus

Proving Borewell witch all accessories isi approved

materials bore 6 inch and as per site condition water

164 2.00 level required depth All materials bore wich Nos 111100.00

submersible pum set use as per tender details our

engineer in charge

Providing and laying cement concrete 1:4:8 (1- Cement :

4- coarse sand : 8- hand broken stone aggregates 40 mm

nominal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth (upto 10 ton)

Providing and laying controlled cement concrete M.250

and curing complete excluding the cost of formwork and

166 63.15 reinforcement for reinforced concrete work in (A) CMT 4247.57

Foundations, footings, Base of columns and Mass

concrete. (more than 10 ton)

Providing TMT Bar FE 500D reinforcement for R.C.C.

167 4047.84 work including bending, binding and placing in position KG 77.29

complete upto floor two level (more than 10 ton)

Providing formwork of ordinary timber planking so as to

give a rough finish including centering shuttering

strutting and propping etc. Height of propping and

centering below supporting floor to ceiling not

exceeding 4 M. and removal of the same for in situ

reinforced concrete and plain concrete work in. (A)

Foundations Footings Bases of Columns etc. and Mass

Item Accoring to

but may be Item Work Unit Tender Rates

(G) Columns PillarsPosts and struts. (1) Square

Rectangular Polygonal in plan. (upto 10 ton)

(H) (1) Sides and soffits of Beams Beam Haunchings

170 48.92 cantilevers Girders Bressumers and Lintels not SMT 202.18

exceeding 1 M. in Depth. (upto 10 ton)

Brick work using common burnt clay building bricks

having crushing strength not less than 35 kg./Sq.Cm. in

foundation and plinth in Cement Mortar 1:6 (1- Cement

: 6 -fine sand)(A) Modular

20mm thick sand faced cement plaster on walls upto

height 10 metres above ground level consisting of 12mm

172 1100.59 thick backing coat of C.M. 1:3 (1-cement : 3-sand) and SMT 337.52

8mm thick finishing coat of C.M. 1:1 (1-cement : 1-

sand) etc. complete.

Finishing wall with weather proof exterior emulsion

paint on wall surface (two coats) to give an required

173 1100.59 shape even shade after thoroughly brushing the surface SMT 117.40

to remove all dirt, and remains of loose powdered

materials.etc complete

Structural steel work ( Confirming to IS 4923-1997)

riveted,bolted or welded in builtup for all type sections,

in framed work, including cutting, hoisting, fixing in

174 732.00 position and applying a priming coat of approved steel KG 131.15

complete as per the structural designs and directions of

Engineer in charge.Column ( 122 x 61 x 3.6mm )

Painting two coats (excluding priming coat) on new steel

and other metal surface with enamel paint, brushing,

175 58.56 interior to give an even shade including cleaning the SMT 90.00

surface an even shade including cleanicn the surface of

all dirt, dust and other foreign matter.

176 20.00 Barbed wire for fencing of galvanized steel wire Quintal 5820.34

R.C.C. ROAD AND PAVING

Box cutting the road surface to proper slope and camber

177 434.27 for making a base for road work including removing the Cum 104.20

excavated stuff and depositing on the road side slope as

directed upto 50Mt.lead.

Earthwork for embankment including breaking clods,

dressing with all lead and lift (excluding watering and

consolidation)(E) From Borrow area within 3.0 Km.

lead (more than 10 ton)

Rolling of earthwork in layers with power roller

179 171.24 including filling in depressions which occur during the Cum 13.40

process. (more than 10 ton)

180 171.24 Watering of earth work as directed. Cum 9.08

Providing and laying cement concrete 1:4:8 (1- Cement :

4- coarse sand : 8- hand broken stone aggregates 40 mm

nominal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth (upto 10 ton)

Providing and laying in position Ready Mixed M-250

grade concrete for reinforced cement conctere work

182 169.67 using cement content as per approved Design Mix Cum 4776.90

manufactured in fully automatic batching plant and

transported to site of work in transit mixer for a lead up

Item Accoring to

but may be Item Work Unit Tender Rates

to 10 kms having continuous agitated mixer,

manufactured as per mix design of specified grade for

reinforced cement concrete work including pumping of

R.M.C. from transit mixer to site of laying, excluding

the cost of centering shuttering finishing and

reinforcement including cost of admixtures in

recommended proportions as per IS: 9103 to accelerate/

retard setting of concrete, improve workability without

impairing strength and durability as per direction of the

Engineer - in - charge. Without Fly Ash (Min cement

level as per latest IS 456 shall be maintained) (Cement

Providing TMT Bar FE 500D reinforcement for R.C.C.

183 5090.02 work including bending, binding and placing in position Kg 77.18

complete upto floor two level

Finishing of C.C.Road by provinding labour charges by

using vaccum dewatering pump floater surface vibrator

including making grooves Rufe finish to surface

levelling up etc. comp As Per engineer in charge.

Excavation for foundation including sorting out and

stacking the excavated stuff up to 50mt lead for A)

Loose or soft soil

Upto 1.50 mt. depth

Providing and laying cement concrete 1:4:8 (1- Cement :

4- coarse sand : 8- hand broken stone aggregates 40 mm

nominal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth (upto 10 ton)

Providing and fixing pre-cast Rubber Dye / steel Dye

inter locking concrete block 60mm thick with grade of

concrete M300 pnumatic compressed / vibrated

mechanically and as per approved design Confirming to

IS 15658 : 2006 including 35 mm Sand layer for

levelling and filling the joint with sand in proper line

and level as per guidlines of IRC : SP 63-2018 etc.

Providing and fixing pre-cast concrete kerb stone of gray

cement based concrete block 30cm length,30cm height

and 15cm thick of M250 grade concret as per approved

design and including excavation for fixing in proper line

and level,filling the joint with C:M 1:3 (1cement:3fine

sand) etc complete.

Providing and supplying evenly priming / tack coat with

bitumen @ rate of 10 Kg/ Sq.M. (including heating the

but excluding the cost of bitumen

Trenching in ordinary soil up to a depth of 30-60 cm

including removal and stacking of serviceable materials

and then disposing of surplus soil, by spreading and

neatly levelling within a lead of 50 m and making up the

trenched area to proper levels by filling with earth or

earth mixed with sludge or / and manure before and after

flooding trench with water (excluding cost of imported

earth, sludge or manure).(CPWD 2020 Item No . 2.1)

Supplying and stacking of good earth at site including

royalty and carriage upto 5 km lead complete (earth

Item Accoring to

but may be Item Work Unit Tender Rates

measured in stacks will be reduced by 20% for

payment). (CPWD 2020 Item No . 2.2)

Providing & laying Selection no. 1 doob grass turf with

earth 50mm to 60mm thickness of existing ground

prepared with proper level and rammingwith required

tools wooden and than rolling the surface with light

rollermake the surface smoothen and light watering the

same maintenance for 45 days or more till the

grassestablish properly,as per direction of officerin

charge (Code 2.34 CPWD 2020) item no.

Complete maintenance of the entire garden features

having as per yard stick in the garden area i.e. lawn

trees, shrubs, edge, flower beds, foliages, creepers,

plants etc. including hoeing,weeding pruning

replacement of plants, gap filling, watering, mowing of

lawn, grass cutting by lawn mover and brush cutter,

removal of garden waste, applying insecticide, pesticide

& fertilizers (whenever required) top dressing of lawn

193 1285.52 with good earth and menure and maintenance of other 2.73

garden related works as directed by office-in-charge

(Cost of Good Earth, Manure, Fertilizer, Insecticide,

Pesticide, lawn mover and brush cutter with fuel & other

T & P material/ articles shall be provided by the

department.) 2.39.5 Play grounds / Public parks Per

(1Mali for 2.00Acre). (CPWD-2020, Horti &

Landscaping, It No-5.9, Pgno-93)

GENERAL FURNITURE WORKS

Providing & Fixing of SOFA as per Detail

Drawings/Architects specifications. The SOFA (Two

Seat) made out From MR Grade 303 Plywood

(Century/Green/Wigwam/CPL make) with Bottom Side

fixnig of 19mm Thick Plywood for Base and Above

Fixing of 19mm Thick Plywood with Vertical Side

fixing of 19mm Thick Plywood with BackSide fixing of

06mm Thick Plywood nad Fixing of 06mm Thick

Flexible Plywood with Inside Fixing of

Wooden/Aluminium/GI/ Framming with Fixing of

Foam, and fixing of Approved Shade Fabric (Sharom or

Equ. make) with Required Side Fixing of nut, Bolt,

Achor Fastner, SS Leg, Wooden Leg, Wooden Handle,

with Required Hardware, Material like Nail (surya

Make), Screw (Hettich/Hepo make), Adhesive (Fevicol

Make), Tools, Tackles & labour Etc Work Complete as

per Detail Drawings. P/F of TWO SEAT SOFA

Providing & Fixing of RECEPTION TABLE as per

Detail Drawings/Architects specifications. The

RECEPTION TABLE made out From MR Grade

Plywood (Century/Green/Wigwam/CPL/Derby Make)

with Top Side Fixing of 19mm Thik Plywood, Vertical

Side fixing of 19/16mm Thick Plywood, Bottom side

Fixing of 19/12mm Thick Plywood with and Required

Back Side Fixing of 06mm Thick Plywood with Inside

Fixing of 0.8mm Thick Off White Laminate

(Timex/CPL make) with outer Surface Fixing of 1mm

Item Accoring to

but may be Item Work Unit Tender Rates

Thick Approved Shade Laminate Vertical/Horzontal

Grains with Chamfer

(Timex/AICA/CPL/Century/Green/Dolby Make) with

Edge Side Fixing of 22/19/32/42mm Thick Edge Band

(Rehau make) with Top Side Fixing of 06mm Thick

White colour Solid Surface with Sealent with Solid

surface`s Chemical (No Gap/Joint Between Joints) with

Buffing work with Fitting of Required hardware,

Material like Nail (surya Make), Screw (Hettich/Hepo

make), Adhesive (Fevicol Make), T/C

(Hafele/Hepo/Hettich/Ebco make), Hinge

(Hafele/Hepo/Hettich/Ebco make) Tools, Tackles &

labour Etc Work Complete as per Detail Drawings.

Providing & Fixing of SIDE STORAGE as per Detail

Drawings/Architects specifications.

The STORAGE made out From MR Grade 303 Plywood

(Century/Green/Wigwam/CPL/Derby Make) with Top

Side Fixing of 19mm Thik Plywood, Vertical Side

fixing of 19/16mm Thick Plywood, Bottom side Fixing

of 19/12mm Thick Plywood with and Required Back

Side Fixing of 06mm Thick Plywood with Inside Fixing

of 0.8mm Thick Off White Laminate (Timex/CPL

make) with outer Surface Fixing of 1mm Thick

Approved Shade Laminate Vertical/Horzontal Grains

196 82.35 with Chamfer (Timex/AICA/CPL/Century/Green/Dolby Sqm 25755.00

Make) with Edge Side Fixing of 22/19/32/42mm Thick

Edge Band (Rehau make) with Top Side without Fixing

of STONE. The STORAGE Will having Openable

Shutter at Equal distance or Architect`s Specifications

with Top Side fixing of TWO DRAWERS with Fitting

of Required hardware, Material like Nail (surya Make),

Screw (Hettich/Hepo make), Adhesive (Fevicol Make),

T/C (Hafele/Hepo/Hettich/Ebco make), Hinge

(Hafele/Hepo/Hettich/Ebco make), 4" Handle (SS

Finish) Tools, Tackles & labour Etc Work Complete as

per Detail Drawings.

Providing & Fixing of BACK STORAGE made out

From MR Grade 303 Plywood

(Century/Green/Wigwam/CPL/Derby Make) with Top

Side Fixing of 19mm Thik Plywood, Vertical Side

fixing of 19/16mm Thick Plywood, Bottom side Fixing

of 19/12mm Thick Plywood with and Required Back

Side Fixing of 06mm Thick Plywood with Inside Fixing

of 0.8mm Thick Off White Laminate (Timex/CPL

make) with outer Surface Fixing of 1mm Thick

197 86.45 Approved Shade Laminate Vertical/Horzontal Grains Sqm 25755.00

with Chamfer (Timex/AICA/CPL/Century/Green/Dolby

Make) with Edge Side Fixing of 22/19/32/42mm Thick

Edge Band (Rehau make) with Top Side without Fixing

of STONE. The STORAGE Will having Openable

Shutter at Equal distance or Architect`s Specifications

without Top Side fixing of TWO DRAWERS with

Fitting of Required hardware, Material like Nail (surya

Make), Screw (Hettich/Hepo make), Adhesive (Fevicol

Make), T/C (Hafele/Hepo/Hettich/Ebco make), Hinge

Item Accoring to

but may be Item Work Unit Tender Rates

(Hafele/Hepo/Hettich/Ebco make), 4" Handle (SS

Finish) Tools, Tackles & labour Etc Work Complete as

per Detail Drawings.

Providing & Fixing of OVERHEAD STORAGE made

out From MR Grade 303 Plywood

(Century/Green/Wigwam/CPL/Derby Make) with Top

Side Fixing of 19mm Thik Plywood, Vertical Side

fixing of 19/16mm Thick Plywood, Bottom side Fixing

of 19/12mm Thick Plywood with and Required Back

Side Fixing of 06mm Thick Plywood with Inside Fixing

of 0.8mm Thick Off White Laminate (Timex/CPL

make) with outer Surface Fixing of 1mm Thick

Approved Shade Laminate Vertical/Horzontal Grains

with Chamfer (Timex/AICA/CPL/Century/Green/Dolby

Make) with Edge Side Fixing of 22/19/32/42mm Thick

Edge Band (Rehau make) with Top Side without Fixing

of STONE. The STORAGE Will having Openable

Shutter at Equal distance or Architect`s Specifications

without Top Side fixing of TWO DRAWERS with

Fitting of Required hardware, Material like Nail (surya

Make), Screw (Hettich/Hepo make), Adhesive (Fevicol

Make), T/C (Hafele/Hepo/Hettich/Ebco make), Hinge

(Hafele/Hepo/Hettich/Ebco make), 4" Handle (SS

Finish) Tools, Tackles & labour Etc Work Complete as

per Detail Drawings.

Providing and fixing CNC cut panelling work of size -

Size: L 5210mm x H 2952mm

Providing & Fixing of MAIN TABLE with

PADESTAL as per Detail Drawings/Architects

specifications.

The MAIN TABLE made out From MR Grade

Plywood (Century/Green/Wigwam/CPL/Derby Make)

with Top Side Fixing of 25mm Thik Plywood, Vertical

Side fixing of 19/16mm Thick Plywood, Bottom side

Fixing of 19/12mm Thick Plywood with and Required

Back Side Fixing of 06mm Thick Plywood with Inside

Fixing of 0.8mm Thick Off White Laminate

(Timex/CPL make) with outer Surface Fixing of 1mm

Thick Approved Shade Laminate Vertical/Horzontal

200 7.00 Grains with Chamfer (Timex/ AICA/ CPL/ Nos 50500.00

Century/Green/Dolby Make) with Edge Side Fixing of

22/19/32/42mm Thick Edge Band (Rehau make). 6mm

Corian on table top as per architect's specification. The

PADESTAL`s Will Having 3 Numbers Drawers Lock

with 3 in 1 Lock with Fitting of Required hardware,

Material like Nail (surya Make), Screw (Hettich/Hepo

make), Adhesive (Fevicol Make), T/C

(Hafele/Hepo/Hettich/Ebco make), Hinge

(Hafele/Hepo/Hettich/Ebco make), 3 in 1 Lock, 4" SS D

Handle Tools, Tackles & labour Etc Work Complete as

per Detail Drawings.

Size 2100 X 1000 X

Providing & Fixing of MAIN TABLE with

201 18.00 PADESTAL as per Detail Drawings/Architects Nos 38885.00

specifications.

Item Accoring to

but may be Item Work Unit Tender Rates

The MAIN TABLE made out From MR Grade

Plywood (Century/Green/Wigwam/CPL/Derby Make)

with Top Side Fixing of 25mm Thik Plywood, Vertical

Side fixing of 19/16mm Thick Plywood, Bottom side

Fixing of 19/12mm Thick Plywood with and Required

Back Side Fixing of 06mm Thick Plywood with Inside

Fixing of 0.8mm Thick Off White Laminate

(Timex/CPL make) with outer Surface Fixing of 1mm

Thick Approved Shade Laminate Vertical/Horzontal

Grains with Chamfer (Timex/ AICA/CPL/ Century/

Green/ Dolby Make) with Edge Side Fixing of

22/19/32/42mm Thick Edge Band (Rehau make). 6mm

Corian on table top as per architect's specification. The

PADESTAL`s Will Having 3 Numbers Drawers Lock

with 3 in 1 Lock with Fitting of Required hardware,

Material like Nail (surya Make), Screw (Hettich/Hepo

make), Adhesive (Fevicol Make), T/C

(Hafele/Hepo/Hettich/Ebco make), Hinge

(Hafele/Hepo/Hettich/Ebco make), 3 in 1 Lock, 4" SS D

Handle Tools, Tackles & labour Etc Work Complete as

per Detail Drawings. Size 2100 X 750 X

Providing & Fixing of MAIN TABLE with

PADESTAL as per Detail Drawings/Architects

specifications.

The MAIN TABLE made out From MR Grade

Plywood (Century/Green/Wigwam/CPL/Derby Make)

with Top Side Fixing of 25mm Thik Plywood, Vertical

Side fixing of 19/16mm Thick Plywood, Bottom side

Fixing of 19/12mm Thick Plywood with and Required

Back Side Fixing of 06mm Thick Plywood with Inside

Fixing of 0.8mm Thick Off White Laminate

(Timex/CPL make) with outer Surface Fixing of 1mm

Thick Approved Shade Laminate Vertical/Horzontal

202 32.00 Grains with Chamfer (Timex/ AICA/ CPL/ Century/ Nos 34845.00

Green/Dolby Make) with Edge Side Fixing of

22/19/32/42mm Thick Edge Band (Rehau make). 6mm

Corian on table top as per architect's specification. The

PADESTAL`s Will Having 3 Numbers Drawers Lock

with 3 in 1 Lock with Fitting of Required hardware,

Material like Nail (surya Make), Screw (Hettich/Hepo

make), Adhesive (Fevicol Make), T/C

(Hafele/Hepo/Hettich/Ebco make), Hinge

(Hafele/Hepo/Hettich/Ebco make), 3 in 1 Lock, 4" SS D

Handle Tools, Tackles & labour Etc Work Complete as

per Detail Drawings.

Size 1800 X 600 X

Providing & Fixing of MAIN TABLE with

PADESTAL as per Detail Drawings/Architects

specifications.

The MAIN TABLE made out From MR Grade

203 310.00 Plywood (Century/Green/Wigwam/CPL/Derby Make) Nos 31108.00

with Top Side Fixing of 25mm Thik Plywood, Vertical

Side fixing of 19/16mm Thick Plywood, Bottom side

Fixing of 19/12mm Thick Plywood with and Required

Back Side Fixing of 06mm Thick Plywood with Inside

Item Accoring to

but may be Item Work Unit Tender Rates

Fixing of 0.8mm Thick Off White Laminate

(Timex/CPL make) with outer Surface Fixing of 1mm

Thick Approved Shade Laminate Vertical/Horzontal

Grains with Chamfer (Timex/ AICA/ CPL/ Century/

Green/ Dolby Make) with Edge Side Fixing of

22/19/32/42mm Thick Edge Band (Rehau make). 6mm

Corian on table top as per architect's specification. The

PADESTAL`s Will Having 3 Numbers Drawers Lock

with 3 in 1 Lock with Fitting of Required hardware,

Material like Nail (surya Make), Screw (Hettich/Hepo

make), Adhesive (Fevicol Make), T/C

(Hafele/Hepo/Hettich/Ebco make), Hinge

(Hafele/Hepo/Hettich/Ebco make), 3 in 1 Lock, 4" SS D

Handle Tools, Tackles & labour Etc Work Complete as

per Detail Drawings. Size 1200 X 600 X

Providing & Fixing of PANTRY BOTTOM

STORAGE as per Detail Drawings/Architects

specifications.

The STORAGE made out From BWP 710 Grade

Plywood (Century/Green/Wigwam/CPL/Derby Make)

with Top Side Fixing of 19mm Thik Plywood, Vertical

Side fixing of 19/16mm (Calibrated) Thick Plywood,

Bottom side Fixing of 19/12mm Thick Plywood with

and Required Back Side Fixing of 06mm Thick Plywood

with Inside Fixing of 0.8mm Thick Off White Laminate

(Timex/CPL make) with outer Surface Fixing of 1mm

Thick Approved Shade Laminate Vertical/Horzontal

204 24.00 Grains with Chamfer (Timex/ AICA/ CPL/ Century/ Sqm 38885.00

Green/ Dolby Make) with Edge Side Fixing of

22/19/32/42mm Thick Edge Band (Rehau make) with

Top Side Fixing of STONE. The STORAGE Will

having Openable Shutter at Equal distance or Architect`s

Specifications with Fitting of SS BASKET, Cup Soucer,

Thali, Thali Plain, Pullout with Fixing of Required

hardware, Material like Nail (surya Make), Screw

(Hettich/ Hepo make), Adhesive (Fevicol Make), T/C

(Hafele/ Hepo/ Hettich/ Ebco make), Hinge (Hafele/

Hepo/ Hettich /Ebco make), 4" Handle (SS 304 Finish)

Tools, Tackles & labour Etc Work Complete as per

Detail Drawings.- Size: L 2020mm x H 750mm

Providing & Fixing of LOW HT WOODEN

PARTITION as per Detail Drawings/ Architects

specifications.

The LOW HT WOODEN PARTITION made out From

MR 303 Grade Plywood

(Century/Green/Wigwam/CPL/Derby Make) with Both

Side Fixing of 12mm Thik Plywood and Required inside

205 18.50 Wooden/Aluminium hollow Pipe Framing (Aluminium Sqm 9039.50

2" x 1" x 1.2mm T) with outer Surface (Both Side of

Partition) Fixing of 1mm Thick Approved Shade

Laminate Vertical/Horzontal Grains with Chamfer

(Timex/AICA/CPL/Century/Green/Dolby Make) with

CP Teakwood Frame with Applying of Polish on

Wooden patti with Fitting of Required hardware,

Material like Nail (surya Make), Screw (Hettich/Hepo

Item Accoring to

but may be Item Work Unit Tender Rates

make), Adhesive (Fevicol Make), Tools, Tackles &

labour Etc Work Complete as per Detail Drawings.

Providing & Fixing of MEETING TABLE as per Detail

Drawings/ Architects specifications. The MEETING

TABLE made out From MR 303 Grade Plywood

(Century/Green/Wigwam/CPL/Derby Make) with Top

Side Fixing of 19mm Thik Plywood, Vertical Side

fixing of 19/16mm Thick Plywood, Bottom side Fixing

of 19/12mm Thick Plywood with and Required Back

Side Fixing of 06mm Thick Plywood with Inside Fixing

of 0.8mm Thick Off White Laminate (Timex/CPL

make) with outer Surface Fixing of 1mm Thick

Approved Shade Laminate Vertical/Horzontal Grains

with Chamfer (Timex/AICA/CPL/Century/Green/Dolby

Make) with Edge Side Fixing of 22/19/32/42mm Thick

Edge Band (Rehau make). The TABLE`s Will Having

POP UP BOX as per Architects Specifications without

Top STONE/GLASS with Fitting of Required hardware,

Material like Nail (surya Make), Screw (Hettich/Hepo

make), Adhesive (Fevicol Make) Tools, Tackles &

labour Etc Work Complete as per Detail Drawings.

- Size: L 1450mm x H 750mm x D 900mm

Providing & Fixing of LINEAR WORKSTATION per

Detail Drawings/ Architects specifications. The top

made out From MR 303 Grade Plywood of 25 mm

thickness (Century/Green/Wigwam/CPL/Derby Make)

with Top Side Fixing of 19mm Thik Plywood, Vertical

Side fixing of 19/16mm Thick Plywood, Bottom side

Fixing of 19/12mm Thick Plywood with and Required

Back Side Fixing of 06mm Thick Plywood with Inside

Fixing of 0.8mm Thick Off White Laminate

(Timex/CPL make) with outer Surface Fixing of 1mm

Thick Approved Shade Laminate Vertical/Horizontal

Grains (timex/AICA/CPL/Century/Green/Dolby Make)

with Edge Side Fixing of 22/19/32/42mm Thick Edge

Band (Rehau make). As per Architects Specifications

without Top STONE/GLASS with Fitting of WIRE

MANAGER (SS/PVC) Required hardware, Material like

Nail (surya Make), Screw (Hettich/Hepo make),

Adhesive (Fevicol Make) Tools, Tackles & labour Etc

Work Complete as per Detail Drawings.

- Size of TABLE: L 1200mm x W 600mm x H 750mm

Supply & Installation of MODULAR PARTITION as

per Detail Drawings/architects Specifications.

The PARTITION will be having support of 75mm

aluminium partition with approved make, coated with

approved colour as per specifications given in drawing.

208 34.50 for LAN data and electrical purpose and to support the Sqm 9090.00

table with top sides covered with softboard and other

side with BPG combination approved by architect. and

bottom sides covered by 6 mm prelaminated panels as

per selected colour shade approved by architect.Modular

Partition ( - Size: L 1200mm x H 1200mm x T 75mm)

Supply & Installation of METAL KEYBOARD TRAY

Item Accoring to

but may be Item Work Unit Tender Rates

Supply & Installation of METAL CPU STAND of

Providing & Fixing of DINING TABLE with SIDE

TABLE as per Detail Drawings/ Architects

specifications.

The TABLE made out From 19mm Thick HIGH

COMPACT SHEET as approved make/ Color/ Shade/

Specifications/ Direction/ Detail Drawings with

Modification, Cutting Proper in Line. Level with Bottom

Side fixing of SS 304 FRAME (Squre Pipe of heavy

Duty) with Proper Buffing, Welding, Joint Welding in

Smooth Surface applicable with Fitting of Required

Tools, Tackles & Labour Etc Work Completed as per

Providing & Fixing of BASIN MIRROR with

FACTORY CUTTING as per Design with Fitting on SS

STUD 3"/2" Long with Edge Polish with Fitting of

Required hardware, Material & Labour Etc Completed

work as per Detail drawings and Architects

Specifications.

Providing & Fixing of WINDOW PELMENT as per

Detail Drawings/Architects specifications.

The PELMET made out From MR 303 Grade Plywood

(Century/Green/Wigwam/CPL/Derby Make) with Top

Side Fixing of 12mm Thik Plywood, Vertical Side

fixing of 12mm Thick Plywood, with Front Side Fixing

of Exteriors Grade 3.4mm THick MDF (Duna/Action

Tesa/Green Make) without Applying of PAINT with

Fitting of Required hardware, Material like Nail (surya

Make), Screw (Hettich/Hepo make), Adhesive (Fevicol

Make), Tools, Tackles & labour Etc Work Complete as

per Detail Drawings.

Curtain Providing, placing and installing in position in

true line and level Curtain along with required set of

214 312.00 accessories like pelmets etc. consisting of specified Sqm 4545.00

fabric,Complete as per details, as directed by Architect

and at all levels.

H/B Mesh CHAIR with BIFMA COMPLY and

following features: 360 Degree Swivel for ease of

motion, Tilt Tension Adjustment, Pneumatic height

Adjustment, ARMS height Adjustment, Synhrco-Tilt

Locking, Seat Glide Mechanism, Maximum Height:

1240 mm, Minimum Height : 1140 mm, Outer

Dimension: 640mm, Seat Deapth: 480 mm, Component

215 15.00 & Material: Breathable Mesh back with Cushoined Nos 11615.00

Fabric , Adjustable Lumbar Support & Armrest in PU,

Componet detail: PU Adjustable Handles, Chrome Base

& Nylon Castors, ERGONOMICS FEATURES:

Adjustable Lumbar Support on the Back, Any Position

Locking Mechanism, Adjustable Armrest with any

Position Lock. FIVE YEARS LIMITED WARRANTY

Durian, Godrej, Wipro or equivalent

H/B Mesh CHAIR with BIFMA COMPLY and

216 25.00 following features: 360 Degree Swivel for ease of Nos 11110.00

motion, Tilt Tension Adjustment, Pneumatic height

Item Accoring to

but may be Item Work Unit Tender Rates

Adjustment, ARMS height Adjustment, Synhrco-Tilt

Locking, Seat Glide Mechanism, Maximum Height:

1240 mm, Minimum Height : 1140 mm, Outer

Dimension: 640mm, Seat Deapth: 480 mm, Component

& Material: Breathable Mesh back with Cushoined

Fabric , Adjustable Lumbar Support & Armrest in PU,

Componet detail: PU Adjustable Handles, Chrome Base

& Nylon Castors, ERGONOMICS FEATURES:

Adjustable Lumbar Support on the Back, Any Position

Locking Mechanism, Adjustable Armrest with any

Position Lock. FIVE YEARS LIMITED WARRANTY

Durian, Godrej, Wipro or equivalent

M/B Mesh CHAIR with BIFMA COMPLY and

following features: 360 Degree Swivel for ease of

motion, Tilt Tension Adjustment, Pneumatic height

Adjustment, ARMS height Adjustment, Synhrco-Tilt

Locking, Seat Glide Mechanism, Maximum Height:

1040 mm, Minimum Height : 940 mm, Outer

Dimension: 610mm, Seat Deapth: 470 mm, Component

217 560.00 & Material: Breathable Mesh back with Cushoined Nos 11110.00

Fabric , Adjustable Lumbar Support & Armrest in PU,

Componet detail:PU Adjustable Handles, Chrome Base

& Nylon Castors, ERGONOMICS FEATURES:

Adjustable Lumbar Support on the Back, Any Position

Locking Mechanism, Adjustable Armrest with any

Position Lock. FIVE YEARS LIMITED WARRANTY

Durian, Godrej, Wipro or equivalent

M/B Mesh CHAIR with BIFMA COMPLY and

following features: 360 Degree Swivel for ease of

motion, Tilt Tension Adjustment, Pneumatic height

Adjustment, ARMS height Adjustment, Synhrco-Tilt

Locking, Seat Glide Mechanism, Maximum Height:

1040 mm, Minimum Height : 940 mm, Outer

Dimension: 610mm, Seat Deapth: 470 mm, Component

218 165.00 & Material: Breathable Mesh back with Cushoined Nos 6565.00

Fabric , Adjustable Lumbar Support & Armrest in PU,

Componet detail:PU Adjustable Handles, Chrome Base

& Nylon Castors, ERGONOMICS FEATURES:

Adjustable Lumbar Support on the Back, Any Position

Locking Mechanism, Adjustable Armrest with any

Position Lock. FIVE YEARS LIMITED WARRANTY

Durian, Godrej, Wipro or equivalent

Supplying of CANTEEN CHAIR as per Selection.

Product Type: Chair Colour: Customize Size: 16 x 16 x

219 64.00 36 inch Type: Cafe Chair Surface Finish: Powder Nos 5050.00

Coated Table Top Material: M S Iron

Seating Capacity: 1 Person Material: M S Iron

Providing & Fixing of CONFERENCE TABLE as per

Detail Drawings/ Architects specifications.

The CONFERENCE TABLE made out From MR

Grade Plywood (Century/Green/Wigwam/CPL/Derby

Make) with Top Side Fixing of 19mm Thik Plywood,

Vertical Side fixing of 19/16mm Thick Plywood,

Bottom side Fixing of 19/12mm Thick Plywood with

and Required Back Side Fixing of 06mm Thick Plywood

Item Accoring to

but may be Item Work Unit Tender Rates

with Inside Fixing of 0.8mm Thick Off White Laminate

(Timex/CPL make) with outer Surface Fixing of 1mm

Thick Approved Shade Laminate Vertical/Horzontal

Grains with Chamfer (Timex/ AICA/ CPL/ Century/

Green/ Dolby Make) with Edge Side Fixing of

22/19/32/42mm Thick Edge Band (Rehau make). The

TABLE`s Will Having POP UP BOX as per Architects

Specifications without Top STONE/GLASS with Fitting

of Required hardware, Material like Nail (surya Make),

Screw (Hettich/Hepo make), Adhesive (Fevicol Make)

Tools, Tackles & labour Etc Work Complete as per

Detail Drawings.

- Size: L 4260mm x H 750mm x D 1420mm

221 28.00 Supplying and fixing of of 8 MODULE POP UP BOX No. 6565.00

Providing & Fixing of RECEWAY For HIDDEN in

GRANITE with All Side Edge Polish with Back, Front,

222 175.00 Top & Bottom Side Fixing of 12mm Thick MR 303 Rmt 9595.00

Grade Plywood with Top Side Fixnig of GRANITE as

per Architects Specifications.

Supply & Installation of TABLE BOTTOM WIRE

UNIT as per Architects Specifications.

Plain gypsum board MRFR grade ceiling: Plain

gypsum MR& FR grade false ceiling Suspension(

considering all levels with require all fabricataion work

and fitiing from RCC slab to false ceiling up to

to600 mm & The rate shall be consider in sqm for all

floors and at all heights ,Offsets whether covelight or

fixed gypsum board size up to 100 mm to 1200 mm in

the false ceilings including all costs) . Work complete as

per the manufacturers specification of Saint Gobain -

M/F Suspended Ceiling 1 hour fire rated .:Providing and

fixing Suspended ceiling using Gypsum or equivalent of

ULtra G. I. Perimeter Channels of size 0.55mm thick

having one flange of 20mm and another flange of 30mm

and web 27mm along with perimeter of ceiling, screw

fixed to brick wall / partitions with the help of nylon

sleeves and screws, at min. 600 mm centers. Then

suspending G. I. intermediate channel of size 45mm,

0.9mm thick with two flanges of 15mm each from the

soffit at 1220mm centers with ceiling angle of width

25mm x 10mm x 0.55mm thick fixed to soffit with G. I.

cleat and steel expansion fasteners. Ceiling section of

0.55mm thickness having knurled web of 51.5mm and

two flanges of 26mm each with lips of 10.5mm are then

fixed to intermediate channel with the help of

connecting clip and in direction perpendicular to the

intermediate channel at 457mm centers. 12.5mm

gypsum MR/FR grade Board (conforming to IS

part 1 2011) is then screw fixed to ceiling section with

25mm dry wall screwed at 230mm centers. Screw fixing

is done mechanically either with screw driver or drilling

machine with suitable attachment. Finally the boards are

to be jointed and finished so as to have a flush look

which includes filling and finishing the edges of the

boards with jointing compound, Joint paper tape and two

Item Accoring to

but may be Item Work Unit Tender Rates

coats of Drywall top coat suitable for Gypsum Board.

Cutouts For light fittings, grill diffusers shall be made.

Necessary cutting / providing openings in the ceiling for

AC fixtures, grills, electrical fittings, or other utility

services, hatch openings etc. shall be provided by the

Contractor and cost of making such modifications shall

be included in the price. No separate charges for cutting

/ providing opening will be paid. Trap doors with

necessary ply frame work to be provided as required at

no extra cost.Joints between the two gypsum board,

(Board placed staggered) gypsum board and wall will

have suitable tape and finishes with plaster of paris so as

to have crack free joints.

Providing and Fixing of Light weight Calcium Silicate

Ceiling Tiles – Microlook edge of size 595x595x15mm

densified edge ,having 100% RH –High Heat &

Humidity Resistance) suitable for all weather conditions

, and Fire Performance - Non Combustible as per BS

476 part 4,Anti fungal & Antibacterial,Eco friendly,

Zero VOC, Non hazardoud, Noise Reduction Coefficient

of ranging from 0.5 NRC to 0.75NRC depending on the

Product, CAC of 32dB,Light reflectance above 85%,

density of 450 Kg/m3, Thermal Conductivity of

W/mo k C, to be laid on of true horizontal level 15 mm

exposed hot dipped galvanized steel sections in tech

panel Format where in main tee having a 150 Route fall

intersection notch for insertion of 150 mm Cross Tee

wherever Required to make a tech panel grid Format

with 150X 1200 MM Tech Panels of metal Gi plain

having Microlok Edge to incorporate all the services on

the tech panel and complete as desired by engineer

incharge.Necessary cutting / providing openings in the

ceiling for AC fixtures, grills, electrical fittings, or other

utility services, hatch openings etc. shall be provided by

the Contractor and cost of making such modifications

shall be included in the price. No separate charges for

cutting / providing opening will be paid. Trap doors with

necessary ply frame workto be provided as required at

no extra cost. Work complete as per the detailed

drawing and instruction of Architect/EIC.

Texture paint ( Insider and outside) :Wall painting two

coats with low VOC Jotashield Tex Ultra of Jotun or

Asian equivalent approved brand in any shades and

colour as directed on wall surface to give an even shade

including applying of a one coat of Penetrating prmer or

equivalent and two coats of paint, scaffolding to at any

height with all labour and material thoroughly brushing

the surface free from mortar droppings and other foreign

matter and sand prepared smooth etc. complete. The

substrate must be sound, clean, dry, free from dust, oil,

grease and laitance etc. All traces of release agents must

be removed. On chalky and dusty surfaces, all loose

material must be removed by stiff bristle brushing. The

primer / paint application is to be done with the rollers.

Item Accoring to

but may be Item Work Unit Tender Rates

rate shall be including crack filling and levelling as per

manufacturers specfication. Top coat should have. 1)

Low VOC content. 2) Crack Bridging ability upto

mm. 3) 100% pure acrylic emulsion 4) Anti-Carbonation

concrete protection 5) Very Low Flame spread 6)

Superior Washability

Providing and fixing fully perforated 12 MM MDF with

20% perforation of 9 mm dia fix on Gypsheera ™

0.5x48 mm metal stud place at 600 mm center to center

vertical and 1200 mm center to center horizontal fix

with periphery channel of Gypsheera ™ 50 mm with

require cavity and 12MM base frame to be fix on metal

227 275.00 channel, cavity filled by 50 MM X 1000 GSM synthetic Sqm. 6565.00

wool, complete systems cover with acoustic fabric. The

peripheral and intermediate members and the suspended

angles shall be designed for each area and the ceiling

detailed drawing shall be submitted to Client/Architect

in charge for approval prior to fabrication. Measurement

will be consider plan area.

Providing and fixing 12.5 mm fully perforated with 18%

perforation of 8 mm dia center to center (GYPROC /

Anutone) false ceiling supported on Gypsheera ™ CRP

surface ribbed perimeter and intermediate channels,

supported on self peripheral partition wall OR

suspended from the soffit at 1220mm centers with

Gypsheera ™ CRP surface ribbed ceiling angle fixed to

soffit with GI cleat and steel expansion fasteners(Mfg.

by Saint Gobain Gyproc).The ceiling section will be fix

with help of connecting clip perpendicular to intimidate

channel at 457mm C/C than Single layer of 12.5mm

tapered edge Gypboard® Plain (conforming to IS

part 1 1996) is then screw fixed to channel section at

designed spacing .All square and tapered edges of the

boards are to be jointed and finished so as to have a flush

look which includes filling and finishing with Gyproc

Jointing compound, Gyproc Joint Paper tape and laying

of 50 mm Synthetic wool. Finally apply plastic

emulsions colour of three coat selected by architect. The

peripheral and intermediate members and the suspended

angles shall be designed for each area and the ceiling

detailed drawing shall be submitted to Client/Architect

in charge for approval prior to fabrication. Measurement

will be consider plan area.

Providing and fixing 12.5 mm fully perforated with 15%

perforation of 12 mm hexagonal false ceiling supported

on Gypsheera ™ CRP surface ribbed perimeter and

intermediate channels, supported on self peripheral

partition wall OR suspended from the soffit at 1220mm

centers with Gypsheera ™ CRP surface ribbed ceiling

angle fixed to soffit with GI cleat and steel expansion

fasteners(Mfg. by Saint Gobain Gyproc).The ceiling

section will be fix with help of connecting clip

perpendicular to intimidate channel at 457mm C/C than

Single layer of 12.5mm tapered edge Gypboard® Plain

(conforming to IS 2095 part 1 1996) is then screw fixed

Item Accoring to

but may be Item Work Unit Tender Rates

to channel section at designed spacing .All square and

tapered edges of the boards are to be jointed and finished

so as to have a flush look which includes filling and

finishing with Gyproc Jointing compound, Gyproc Joint

Paper tape and laying of 50 mm Synthetic wool. Finally

apply plastic emulsions colour of three coat selected by

architect. The peripheral and intermediate members and

the suspended angles shall be designed for each area and

the ceiling detailed drawing shall be submitted to

Client/Architect in charge for approval prior to

fabrication. Measurement will be consider plan area.

Providing and fixing natural wood stage flooring 16 x

915 x 125 mm with tongue and groove fixing on 50 x

mm natural wood 600 x 600 gridwoork along with the

fixing 12 mm MR plywood on fabricated frame work

with require accessories, hardware and adhesive, cavity

should be filled by 24/50 mm glass wool than apply

wood protection mono coat on wooden plank with

require sealer. The peripheral and intermediate members

and the suspended angles shall be designed for each area

and the ceiling detailed drawing shall be submitted to

Client/Architect in charge for approval prior to

fabrication. Measurement will be consider plan area.

Providing and fixing over all 56 mm Acoustic door with

acoustic door seal using with 100 x 150 mm frame

surrounded 4 mm neoprine strip, wooden beading, door

make by 12 mm plywood and 12 mm board with require

perforation with infill of acoustic wool and 6 mm

flexibale acoustic sheet, one side finish of interior

surface and another side of laminet finish with essenisal

hardwae like doo handle, door spring, door stop, lathe

lock, etc as per under direction by client / architect in

charge with prior approval.

External Cladding Specification – Screens pattern using

SHERA Plank Supply& Installation external cladding

using fibre cement plank of SHERA make cassia/

straight grain/ teak texture (External Grade) thickness

8mm and dimension 150mmX3000mm. SHERA Fibre

cement plank should be of minimum density 1300kg/

m3 (±50) and comply to ASTM C 1185 and ISO

part (E) for confirming durability properties and BS

– part 5, 6 & 7, Thermal conductivity should be

minimum 0.15 W/m˚K and PH value should be in the

232 302.00 range of 7 – 8. Depending on height of structure SHERA Sqm. 2525.00

Board to be fixed using Aluminium rectangular frame

section of suitable gauge with minimum spacing 450mm

to 600mm or as per direction of Engineer Incharge,

SHERA Plank to be fixed using SHERA Screws of

Tensile strength 34N and Shear strength 68N on framing

maintaining distance of minimum 25mm between two

SHERA planks . All plank to plank joints to be

staggered and finished with one coat of cement based

primer on all side, with 2 coats of water based acrylic

paint of approved shade.

233 816.00 Providing and fixing full height Prelam PVC partition Sqm. 6363.00

Item Accoring to

but may be Item Work Unit Tender Rates

system 50mm thick consisting of 40mm sandwich PVC

panel made out of 36mm high density expanded

polystyrene sheet (E.P.S.Thermocol) stuck on both side

with 2mm thick prelim PvC sheet reinforced with frame

work made from 35mm x 5mm M.S. angle. In between

two M.S. angles 4 mm with feathered edges shall be

fixed on floor and 50 x 75 mm with feathered edges

prelim PVC “C” channel of size 50mm x 75mm with

feathered edges prelim PVC panel shall be inserted in

the PVC ‘C” channel The first and last M.S. angle

should be erected such that it is inside a PVC C channel

of size 50 x 75mm In between adjoining EPS

sandwiched PVC partition panel 4mm thick x 75 mm

width prelim PVC sheet feathered at edges shall be stuck

on front and back face using solvent cement etc. An

additional 4mm thick PVC strip of 40mm width is to be

stuck on the intrior side of the ‘C” channel using PVC

solvent adhesive completeas per direction of Engineer in

charge. Manufacture’s specification and drawing

Providing, Fabricating and Installing of Tensile Fabric

Structure, as Porch Area Covering, including fabrication

and installation of fabric canopy as per design and

details, using white colour 502 (590 GSM) architectural

structural fabric, by Serge Ferrari / Mehgies /Sattler or

equivalent, flame retardant, having polyester woven

scrim and topped with UV resistant layer, heat sealed at

joints and hot air or cyanoacrylate pasting other required

locations. MS pipe structure, composed of steel closed

hollow sections of ASIAN / TATA / SURYA or

equivalent brand, coated with two coats of zinc oxide,

duly painted with epoxy paint, using primer & selected

color finished top coat and other required

hardware including SS nuts, bolts, cables and other

required hardware as required per details, design, etc.

Providing, Fixing and installing all LED exterior light

fixtures of 90 Watt with Aluminium housing, toughened

235 0.00 glass cover and IP 56 rating of Hawells, Philips, Wipro Nos 10964.14

or equivalent make as per approval from architect. Unit

price of light fixture

Providing, Fixing and Installation of Motorised Vertical

Rolling Shutter Product: G.I. Motorized Rolling Shutters

Door Dimension Width: 8200 mm Height: 7500 mm

Max. Area: 120.0 Sq.mts. Opening Direction: Vertical

Opening/Closing Speed: 0.05-0.1mtr /sec Wind

Resistance: Up to90Km/ Hr Door Structure

Slat Material: CRC M.S/ G.I Steel Slats available in

236 10.80 mm thickness Slat Profile: Corrugated Profile RSC 88 Sqmt. 1908.90

Side Guide: Mild Steel/GI Side guides 150 mm wide

Bottom Profile: GI Bottom Plate with Angle Stiffener

Rubber bottom seal Roller Shaft: Heavy duty Mild Steel

strong suspension Tubular shaft without springs

Side Brackets: M.S plate 3 mm to 10 mm, as per the

opening dimension Hood Cover: Galvanized Steel sheet

Finish Surface Finish: Primer finish as standard

Item Accoring to

but may be Item Work Unit Tender Rates

Painting: Powder coating Details for Automation System

Control Type: Casing made of compact impact-resistant

material incorporating operating buttons for shutter

operation. Specific IP rating provided as per the

requirement. Deadman/Pulse Control suggested

application wise. Drive Type: Imported make Indirect

/Direct Connecting Drive selection made depending on

the space opening availability, no of operations

subjected etc. Drive with integral breaking system with

Long life expectancy CE Certified drives complying

European standard. Drive Unit: Electric Motor

(Imported Make) Three Phase Emergency Operation:

Manual operation by Hand chain or hand crank.

Providing and fixing acrylic Name plate of required size

on Room with lettering etc. complete as per instruction

of engineer in charge including all labour and material

Providing and fixing PRE ENGINEERED ROOF

comprising of galvalume sheets, steel structural trusses,

braces, framings etc. incorporating skylights, evaces,

gutters etc. and other ancillary components in desired

slopes and shapes, with sound proof and Thermal

insulation arrangement. Following are the principal

components and specs. 1) Built-up component of ASTM

A572M Grade 50 Type 1 of yield strength of 345MPa.

2) Hot rolled tubes as per IS 1161 of yield strength of

250 Mpa. Designing, fabrication, supply and erection of

Hot rolled members like ISMB, ISMC, tube sections and

pipe sections etc. with all labour, consumable, Plant,

Machinery etc. complete. 3) Exterior roof panel of

ASTM A792 M Grade 342 class 1 coating AZ150

(G550) of yield strength 550 Mpa. 4) Cold formed of

ASTM A653 M Grade 340 class 1 coating Z120-GI of

yield strength 340 Mpa. 5) X-Bracing rods as per IS

238 45.00 2062 of yield strength 250 Mpa., X-Bracing sq/rectangle Sqmt. 6615.50

hollow sections as per IS 4923 of yield strength of

Mpa. And X-Bracing angles as per IS 2062 of yield

strength of 250 Mpa. 6) Anchor bolts as per IS 2062-

UNPAINTED of yield strength 240 Mpa. 7) High

strength bolts as per IS 3757 Black Finished of yield

strength Gr. 8.8, 8) Connection Bolts as per IS

Yellow Chrome of yield strength Gr. 4.6, Surface

preparation include Wire Brush Cleaning and Paint

Application i.e., 1 coat of Primer and 2 coat of paint of

approved shade. Also on the steel structure, paint one

coat of red oxide (35 micron) & two coats of synthetic

enamel paint (25 micron each). In this PEB Structure

Size, quality/grade as specified above shall be strictly

adhered to no separate payment in terms of tonne will be

paid. The detailed design of the PEB frame structure will

be verified and approved by the authority appointed by

Providing and Fixing Sculpture of nearly 1.20 mt X

239 6.00 mt X 0.60 mt size of metal material and as per architect Nos 6464.00

design as directed by engineer in-charge.

Item Accoring to

but may be Item Work Unit Tender Rates

Providing and Fixing Sculpture reilif work of nearly

240 10.00 6.00 mt X 6.00 mt size on metal sheet and as per Nos 7575.00

architect design as directed by engineer in-charge.

Providing and Fixing tensile structure of modular, prefab

and panel build type of Steel and PVC material use in

seating arrangement, parking and building entrance,

having aluminium, galvanized, or steel pole material and

frame should be steel material easily assembled, and eco

241 25.00 Friendly waterproof material, weight (Gsm) 502, 602, Sqmt. 17927.50

702 , Tensile Strength 300 APH of any colour, plain

surface of surge Ferrari brand with 10 years warranty,

including fitting, labour, fixtures, fastening, and all type

of equipments, supporting poles, primer, painting etc.

complete as directed by engineer in charge.

Stainless Steel Dustbin (HOTC) (Steel Dusbin Pedal)

242 55.00 litres weight of dustbin:1200 grams. Lid: foot pedal Nos 3838.00

operated gripping provision frontal

Dustbin Mterial: LLDPE with 100 litres Bin Capacity.

Colour Green & Blue. Lid: Swing type

Supply, Installation and commissioning of machine

powder coated metal body factory finished movable

storage filing racks i.e., mobile compactors/ optimizers

with detail as follows: It should consists of storage units

of 381 mm deep – fixed or movable – bolted to

undercarriage which rolls onto the channels, which, are

firmly embedded to the ground with minimum 2 Rails

and 1 Bay and Drive type where Bay denotes side by

side unit placements in a block. Each compactor shall

have following type of blocks:

1. Single Static (SS)

2. Single Last (SL)

3. Twin Mobile (TM) - 2 body back to back.

Depth: 381 mm; Width: 915 mm; Height: 2360 mm +/-

15mm (Body excluding under structure and rails)

The body including shelves will be given antirust

surface treatment & are powder coated with epoxy

polyester powder. Final finish will consist of epoxy

polyester powder coating of approved colour & shade

with a Dry Film Thickness of minimum 40 microns.

Shelf will be made of 0.8 thick CRCA steel conforming

to IS:513 Gr. D or DD with max load bearing capacity

of 80 Kg uniformly distributed per shelf. Shelves will be

mounted on support brackets & shelf level adjustable at

approx. 25.4 pitch. There will be 5 adjustable shelves

per body giving 6 loading levels.

Painting lines, deashes, arrows, letters etc on roads, Air

fields and like in two coats with road marking paint,

brushing including cleaning the surface of all dirt, dust

and other foreign matter. (i) Over 10cm in width

Aluminium Composite Panel (ACP) Providing,

fabricating & installing in position 4mm thickness

0.25mm skin aluminium composite cladding of

"PIONEER, ALUTECH, ALSTRONG" are

protected with self adhesive protection film by erecting

over the wall using aluminium frames @ desired levels

Item Accoring to

but may be Item Work Unit Tender Rates

made with 50 x 25 x 1.2mm extruded channel

sections confirming to IS-7333 mechanical properities.

The frame shall be fixed on external wall surface with

necessary brackets, bolt nut arrangements with screws

aluminium L cleats, backer rod, wacker / dowcorning

silicon sealant etc., @ all levels & heights & silicon

sealant is filled in complete as per specification & shop

drawings, in case ACP sheet curve/bending cost charged

ACP Sheet Cladding MS Frames Pillars 100 x 100 14g-

Tube Pillars Support & Runner 80 x 40 14g Tube.

247 85.85 Runner Middle supporting 50 x 50 16g.Tube. Sqmt. 4646.00

Pillars base plate & Anchor Bolt. ( Civil Foundation to

be provided by Civil Contractor).

Scaffolding Charges for Canopy work & ACP Cladding

Work.(Double bamboo Scaffolding)

TOUGHENED GLASS FRAMELESS PARTITIONS

Design,Providing, installation and fixing 12 mm thick

Toughened Glass (Glass Make:- Saint Gobain, Asahi

India Glass etc.) partitions upto 3.00 M with proper

machine edge finish in angle & fixed in the flooring with

Aluminium 'U' channel & flushed with the ceiling. Glass

panels to be formed as per approved modules 12 mm

thick clear toughened glass edge polished and accurate

designed holes to be installed by means of steel angle or

spider fittings of an approved make Saint Gobain / Asahi

or equivalent. The structural Glass walls system shall be

complete with proper water tight silicon sealants

/gaskets. M.S Brackets to support the structure system

shall be hot dipped galvanized and slots in the brackets

to be pre drilled not flame cut. All bolts,nuts,washers

shall be 300 series non magnetic stainless steel and lock

washers to be provided at all bolting connections. All

anchor fasteners shall be of Hilti/Fisher make. All

structural silicone shall be of Dow Corning make. The

Rates includes all material, Labour, Wastages, Cost of

scaffolding,fixing & Finishing with frosted design film

TOUGHENED GLASS FRAMELESS DOORS

Design,Providing, installation and fixing 12 mm thick

Toughened Glass (Glass Make:- Saint Gobain/ Asahi

glass India) DOORS upto 2.10 M with all as per

required arrangement & proper machine edge finish in

angle & fixed in the flooring side with Aluminium 'U'

channel . Glass panels to be formed as per approved

250 181.44 modules 12 mm thick clear toughened glass edge Sqmt. 8080.00

polished and accurate designed holes to be installed by

means of steel fittings of an approved make Saint

Gobain / Asahi or equivalent. Including Floor spring

(make:- Godrej, Dorma or equivalent), Lock approved

make, Door Handle both side(SS make), all works

including labour, wastages, cost of scaffolding, finishing

with frosted design film etc. complete.

Electrification Work

251 22.00 Point wiring for Two Way Controlled Light Point with pt 603.98

Item Accoring to

but may be Item Work Unit Tender Rates

2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are

of .ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires erected in below type of pipe with

6A Modular type switches and following type of

accessories erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured /

metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected. with necessary batten/angle

holder or ceiling rose or H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete - CAT III

Point wiring for Light / Bell with 2-1.5 sq.mm & earth

wire of 1.5 sq.mm (Green) both are of ISI marked

KV grade FRLS PVC insulated multi strand copper

wires up to 10 mtr length , in below type of pipe erected

with 6A Modular type switch / bell push & accessories

and earth continuity of following type, erected on PVC /

252 1409.00 Metallic/Wooden box, single mounting base frame Pt 485.81

covered with textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector as

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete - CAT III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of

1.5 sq.mm (Green) both are of .ISI marked 1.1 KV

Grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected with

6A Modular type switch and hum free EME step type

electronic fan regulator mounted and accessories with

253 342.00 earth continuity of following type erected on PVC / pt 674.68

Metallic/Wooden box, single mounting base frame

covered with textured/metallic/white front plate

modules erected on / in wall / ceiling as per pipe erected.

with necessary ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete

Point wiring for Individual Plug with & earth wire of

1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires up to

mtr length, in below type of pipe erected complete with

Modular type switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with appropriate front

plate modules erected on / in wall / ceiling as per pipe

erected with following type of accessories.

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu.

Wire from nearby switchboard/mcb db board

(F) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete Cat. III

Point wiring for Individual Plug with & earth wire of

1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires up to

mtr length, in below type of pipe erected complete with

Modular type switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with appropriate front

Item Accoring to

but may be Item Work Unit Tender Rates

plate modules erected on / in wall / ceiling as per pipe

erected with following type of accessories.

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm

Cu. Wire from mcb db board.

(F) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete Cat. III

Point wiring for on board Looped Plug with 6A Modular

type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate

modules erected on / in wall / ceiling with following

type accessories catt-iii

Providing and erecting ISI mark Medium class RIGID

PVC PIPES of following size complete to be erected

on/in wall or ceiling erected with necessary PVC

fittings & Junction boxes fixed with adhesive solution &

Clamps with following dia of pipes, in approved manner

as directed (b) 25 mm

Providing and erecting ISI mark Medium class RIGID

PVC PIPES of following size complete to be erected

on/in wall or ceiling erected with necessary PVC

fittings & Junction boxes fixed with adhesive solution &

Clamps with following dia of pipes, in approved manner

as directed (b) 40 mm

Providing & erecting PVC Corrugated Flexible Conduit

259 685.00 with required nos. of coupling, PVC bushes, Check-nuts mtr. 21.21

etc. complete of following sizes. (2) 25 mm

Supplying under floor pregalvanised corrosion proof

rectangular sheet steel cable trunking of 1.6 mm thick

having with stand point load up to 1.33 Ton & free from

seepage of concrete of screed water with all

accessories,Junction Box,Joints as required and

260 450.00 demanded by engineer-incharge and laying/erecting as mtr. 1342.29

per OEM guidelines and as per instruction of engineer

incharge having following size of dimensions and No of

compartments (W x D x T) Cat-III

[13] 300mm x 38mm x 1.6 mm with Three

Providing and erecting Mains with 1.1 KV grade FRLS

PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected concealed

in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size (A) With

medium class Rigid PVC pipe and accessories(a) 2 wire

providing and erecting Mains with 1.1 KV grade FRLS

PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected in / on wall /

ceiling with 2.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth

continuity of following size (A) with medium class

Rigid PVC pipe and accessories .

(g) 4 wire 4 sq. mm

Item Accoring to

but may be Item Work Unit Tender Rates

Supplying and erecting Flexible PVC insulated multi

strand multi core 1.1 kv grade ISI marked copper wires

of following size to be erected as directed.

(e) 1.50 Sq.mm 3 core round PVC sheathed

providing and erecting Mains with ISI marked, 1.5KV

grade electrolyte multi stranded, annealed copper

conductor with heat resistant PVC insulated conforms to

IS 694, IEC - 227 erected in existing pipe of following

size (Specifically for control panel, relays, power

switchgears, motor starters & control wiring) with

required size of copper lugs, nuts and bolts if required.

(d) One wire 4.00 sq. mm

267 140.00 (e) One wire 6.00 sq. mm Mtr. 56.56

268 140.00 (f) One wire 10.00 sq. mm Mtr. 91.91

269 140.00 (g) One wire 16.00 sq. mm Mtr. 142.41

Providing & erecting Switch board for Computer or

electric apparatus consisting of following modular type

accessories mounted with PVC / Metallic

concealed/open box with single mounting base frame

270 165.00 covered with textured/metallic /white front each 1133.22

plate,modules erected with necessary connections as

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch 3 nos. 6A 5 pin Plug , CAT- III

Supplying & erecting Approved make call bell indicator

with buzzing sound and Red light indicating lamp with

Red light button to attend the call suitable for 240 v

c/s supply to be erected.

Supplying and erecting LED indoor fittings with LEDs

of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made

of thick sheet Steel conforming to IS: 513/CRCA/

aluminium pressure die cast powder coated and high

U.V. & corrosion resistance with diffuser housed in

aluminium casted body with company mark/name 160V

to 270V, Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K, Luminaire efficacy>

lumens/watt, LED driver efficiency > 85 %

(fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount

Downlight with provision for spring loaded mounting

clips complete.IP2

(iv) 22-24 watts, Surge-2 KV

273 150.00 (ii) 11-15 watts, Surge-2 KV each 427.23

Supplying and erecting LED street light / Flood light

fittings with High power White LEDs wattage of 3 Watt

and above assembled on single MCPCB, efficiency

274 105.00 more than 130 lm/w and corrosion free High pressure each 3345.12

die cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser

and Polycarbonate optics/ lenses, with toughened glass

Item Accoring to

but may be Item Work Unit Tender Rates

with company mark/name engraved or embossed 160 to

270 V,Power Factor more than 0.95, THD < 10 %, CCT

3000 K to 5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver efficiency >

85%. (fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity

between the ranges shown.)(A) Street Light (IP-65),

Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection. (iv)

above 36 to 48 watts.CATT-III

providing and erecting Approved make Double Pole

275 70.00 Plastic Switch and fuse 250V., 30A confirming to IS each 129.28

erected on Polished wooden block as directed.

providing and erecting Approved make Three Phase &

Neutral LT Heavy Duty Switch Disconnector Fuse Unit

Cubical type for panel mounting complete with

276 1.00 operating mechanism suitable to operate on 415V A.C. , each 8141.61

23A duty With HRC fuses of suitable load confirming

to IS. 13947 (Part I & III). of following capacities. (e)

providing and erecting Miniature circuit breaker single

pole 6A to 25A suitable to operate on 240 V A.C.

277 1854.00 system and having breaking capacity 10 KA to be each 112.11

erected in existing box. confirming to IS 8828/1996 with

ISI Mark Cat.III

Providing & erecting 240 V MCB double pole switch

for motor & inductive load (C Curve) having 10 KA

278 65.00 breaking capacity & confirms to IS : 8828 in existing each 299.97

box having following capacity (A) 6 to 32 Amp.

Providing & erecting 240 V MCB double pole switch

for motor & inductive load (C Curve) having 10 KA

279 65.00 breaking capacity & confirms to IS : 8828 in existing each 330.27

box having following capacity (B) 40 Amp.

Providing & erecting 415 V MCB Four Pole for Motor

& Inductive Load (C Curve) having 10KA breaking

280 55.00 capacity & confirms to IS :8828 in existing box having each 595.90

following capacity

(a) 6 to 32 Amp. Cat.III

Providing & erecting 415 V MCB Four Pole for Motor

& Inductive Load (C Curve) having 10KA breaking

281 55.00 capacity & confirms to IS :8828 in existing box having each 668.62

following capacity

(b) 40 Amp. Cat.III

Providing & erecting 415 V MCB Four Pole for Motor

& Inductive Load (C Curve) having 10KA breaking

282 65.00 capacity & confirms to IS :8828 in existing box having each 737.30

following capacity

(c) 63 Amp. Cat.III

Providing & erecting 415 V MCB three Pole for Motor

283 65.00 & Inductive Load (C Curve) having 10KA breaking each 587.82

capacity & confirms to IS :8828 in existing box having

Item Accoring to

but may be Item Work Unit Tender Rates

following capacity

(a) 6 to 32 Amp. Cat.III

Providing & erecting 415 V MCB three Pole for Motor

& Inductive Load (C Curve) having 10KA breaking

284 41.00 capacity & confirms to IS :8828 in existing box having each 647.41

following capacity

(b) 40 Amp. Cat.III

Providing & erecting 415 V MCB three Pole for Motor

& Inductive Load (C Curve) having 10KA breaking

285 56.00 capacity & confirms to IS :8828 in existing box having each 716.09

following capacity

(c) 63 Amp. Cat.III

Supplying & erecting 20 Amp 10 KA ‘C Curve’ single

pole MCB with 20 Amp. Plug socket, company

286 70.00 fabricated powder coated sheet steel enclosure erected as each 527.22

directed with connection. [A] Metal Clad Socket with

metal clad top Cat.III

Supplying & erecting approved make Electronics Starter

and relay for air conditioners in ABS plastic moulded

housing. Company fabricated with bakelite terminal for

connection with silver coating bimetallic contact in

switching device for o/p with following features.

287 6.00 (1) Low Voltage Protection below 130 V each 886.78

(2) High Voltage protection above 270 V

(3) Overload protection for 2-5, 4-10, 8-14, 10-16, 14-22

Amp. (inverse time chara-)

(4) Indicating LEDs for AC on LV, HV, O/L, T/D

(5) With unique feature of 3 minute of time delay.

3-11-1. Half / One Module Blanking Plate of Standard

3-11-2. Plastic enclosure fitted with DIN rail suitable for

incorporating One / Two nos. MCB

3-11-3.Plastic enclosure fitted with DIN rail suitable for

incorporating Three /Four nos. MCB

3-11-4.Sheets steel powder coated enclosure suitable for

incorporating One/Two nos. MCB.

Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to

IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

292 2.00 appropriate nos. of MCBs.(The DBs should be used of each 1152.41

same company of MCB to be used) suitable for

(A) single phase incoming and horizontal single phase

(b) sheet steel double door (IP-43) (iii) 8 way

Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to

IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

293 2.00 appropriate nos. of MCBs.(The DBs should be used of each 3412.79

same company of MCB to be used) suitable for

(B) three phase incoming and single phase horizontal

type outgoing Per phase isolation type (PPI)

(b) sheet steel double door (IP-43) (iii) 8 way

294 21.00 Supplying & erecting Sheet Steel powder coated Cable each 689.83

Item Accoring to

but may be Item Work Unit Tender Rates

end termination Box to be mounted on Top or Bottom

of the MCB Distribution Box for housing/covering Extra

wires & Cables, suitable for following size of MCB DB

(G) Three Phase 8 Way

Supplying & erecting Sheet Steel powder coated Cable

end termination Box to be mounted on Top or Bottom

of the MCB Distribution Box for housing/covering Extra

wires & Cables, suitable for following size of MCB DB

(H) Three Phase 12 Way

Providing & erecting approved make thermo plastic

MCB/RCCB distribution board having modular Double

door with DIN rails, epoxy powder coated finish metal

frame & door assembly with Acrylic/ Plastic door,

spring & hinged pins complete with required PVC

sleeved 32 / 63A copper Bus strips without MCB /

(e) Two Row 28 Module

Providing and erecting Sheet Steel powder coated

Vertical MCB distribution board (VTPN) - flush /

surface mounted double door (IP54) fitted with insulated

copper busbar, isolated neutral link, earth bar and DIN

rail, confirming to IS 13032 and BS 5486-1986,IP-54

suitable for 63/100 AMP TPN MCCB + RCCB as

incomer and three phase outgoing as per following

.(The DBs should be used of same company of MCB to

(D)12 way outgoing

Providing and erecting powder coated distribution board

with WI-FI - flush / surface mounted double door (IP-

42) fitted with size 475*398,CRCA sheet thickness

0.9mm,Genral Tolerance,Power Coting DFT 60-90

micron,Frame Thickness 1.2mm.,Frame & Cover

Material Metal with Nessesary Accessories

Supplying & erecting approved make RCCB + MCB

(Electro magnetic type only) working on residual current

device having 10 KA short circuit breaking capacity and

30 mAmp. Sensitivity & 30 mili sec. tripping time

299 65.00 conforming to IS 12640 test knob facility trip free each 1944.25

mechanism operating for rated leakage at nominal ten

volt, complete erected including all materials lugs

screws etc. completed. [b] 32A / 40A, 2 pole Single

Supplying & erecting approved make RCCB + MCB

(Electro magnetic type only) working on residual current

device having 10 KA short circuit breaking capacity and

30 mAmp. Sensitivity & 30 mili sec. tripping time

300 65.00 conforming to IS 12640 test knob facility trip free each 2338.15

mechanism operating for rated leakage at nominal ten

volt, complete erected including all materials lugs

screws etc. completed.

[c] 63 A, 2 pole Single Phase Cat. II

Providing and erecting metallic vitrified danger notice

board as per language suggested by engineer incharge

Item Accoring to

but may be Item Work Unit Tender Rates

for HIGH VOLTAGE installation to be erected as per

Providing & erecting High Voltage Danger Notice

302 30.00 Board sticker as per language suggested by engineer each 35.35

incharge of standard size-as per IS

Providing and erecting required size HOT deep

Galvanised iron strip for earthing of H.T. , OCB/ ACB/

Transformer LT panel board, Motors etc. using proper

Providing and erecting required size Copper strip for

304 787.00 earthing of H.T. OCB / ACB/ Transformer, LT panel each 151.50

board, Motors etc. using copper clamp.

Providing and erecting Annealed bare Copper wire 8 to

Supplying & erecting in earthpit of minimum bore dia.

225mm size approved make Safe Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free hot dipped G.I.Pipes having

Outer pipe dia of 80 mm having 80-200 Micron

galvanising, Inner pipe dia of 40 mm having 200-250

Micron galvanising, connection terminal dia of

mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation

suitable for following type of applications with chamber

and heavy duty cover (A)(approved make OEM has to

submit test certificate including value of earth resistance

of installation duly stamped and signed by agency and

officer Incharge has to ensure the value of earthing

resistane mentioned in test Certificate) & having back

filling compound of (B) Inner chemical (CCM

Compound)- Resistivity:- 0.2 ohm / meter testing as per

IEC 62561-2017, Voltage drop:- < 1 volt at no load &

dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable to

retain moisture for long time Necessary test report must

be submitted by Agency.

[B] For Electrical installation up to 11 KV located in

other than normal soil i.e. Soft Rock, Marshy Soil etc.

-Length of Pipe : 2 mtr

-Back filling Compound :1 no. Bag of 25 Kg

Supplying & erecting in earthpit of minimum bore dia.

225mm size approved make Safe Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free hot dipped G.I.Pipes having

Outer pipe dia of 80 mm having 80-200 Micron

galvanising, Inner pipe dia of 40 mm having 200-250

Micron galvanising, connection terminal dia of

307 10489.00 mm with constant ohmic value surrounded by highly each 15.15

conductive compound with high charge dissipation

suitable for following type of applications with chamber

and heavy duty cover (A)(approved make OEM has to

submit test certificate including value of earth resistance

of installation duly stamped and signed by agency and

officer Incharge has to ensure the value of earthing

resistane mentioned in test Certificate) & having back

Item Accoring to

but may be Item Work Unit Tender Rates

filling compound of (B) Inner chemical (CCM

Compound)- Resistivity:- 0.2 ohm / meter testing as per

IEC 62561-2017, Voltage drop:- < 1 volt at no load &

dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable to

retain moisture for long time Necessary test report must

be submitted by Agency.

[C] For Electrical Installation covering Transformer

Neutrals, Lightning arrester Earthing, A.C. Plant &

Sensitive Computer System (like Automation,

SCADA)i.e. independent Earthing located in other

than normal soil i.e. Soft Rock, Marshy Soil etc..

-Length of Pipe : 3 Mtrs.

-Back filling Compound :2 nos Bags of 25 Kg.

Providing one bag of 25 Kg. Additional Back Filling

Compound (BFC) suitable for safe earthing device.

Supplying & erecting XLPE(IS:7098)(I)-88 ISI

309 1250.00 unarmoured copper cable 1.1 KV grade to be erected as Mtr 101.00

directed of following size. (A) 2 core 2.5 Sq. mm

Supplying & erecting XLPE(IS:7098)(I)-88 ISI

310 1050.00 unarmoured copper cable 1.1 KV grade to be erected as Mtr 131.30

directed of following size. (B) 2 core 4 Sq. mm

Supplying & erecting XLPE(IS:7098)(I)-88 ISI

311 1250.00 unarmoured copper cable 1.1 KV grade to be erected as Mtr 137.36

directed of following size. (E) 3 core 2.5 Sq. mm

Supplying & erecting XLPE(IS:7098)(I)-88 ISI

312 2150.00 unarmoured copper cable 1.1 KV grade to be erected as Mtr 188.87

directed of following size. (F) 3 core 4 Sq. mm

Supplying & erecting XLPE(IS:7098)(I)-88 ISI

313 2150.00 unarmoured copper cable 1.1 KV grade to be erected as Mtr 292.90

directed of following size. (G) 3 core 6 Sq. mm

Supplying & erecting XLPE(IS:7098)(I)-88 ISI

314 150.00 unarmoured copper cable 1.1 KV grade to be erected as Mtr 573.68

directed of following size. (M) 4 core 10Sq. Mm

Supplying & erecting XLPE(IS:7098)(I)-88 ISI

315 150.00 unarmoured copper cable 1.1 KV grade to be erected as Mtr 728.21

directed of following size. (N) 4 core 16Sq. Mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Aluminium conductor for

316 200.00 1.1 KV. to be laid on wall with necessary clamps or in Mtr 220.18

existing trench / pipe of following size of cables

(B) 3 1/2 core 35 Sq. mm ( 16 Sq.1/2 mm core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Aluminium conductor for

317 150.00 1.1 KV. to be laid on wall with necessary clamps or in Mtr 284.82

existing trench / pipe of following size of cables

(C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Aluminium conductor for

318 250.00 1.1 KV. to be laid on wall with necessary clamps or in Mtr 378.75

existing trench / pipe of following size of cables

(D) 3 1/2 core 70 Sq. mm ( 35 Sq.1/2 mm core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI

319 650.00 armoured cable multistrand Aluminium conductor for Mtr 490.86

1.1 KV. to be laid on wall with necessary clamps or in

Item Accoring to

but may be Item Work Unit Tender Rates

existing trench / pipe of following size of cables

(E) 3 1/2 core 95 Sq. mm ( 50 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Aluminium conductor for

320 450.00 1.1 KV. to be laid on wall with necessary clamps or in Mtr 731.24

existing trench / pipe of following size of cables

(G) 3 1/2 core 150 Sq. mm ( 70 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Aluminium conductor for

321 650.00 1.1 KV. to be laid on wall with necessary clamps or in Mtr 904.96

existing trench / pipe of following size of cables

(H) 3 1/2 core 185 Sq. mm ( 95 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Aluminium conductor for

322 250.00 1.1 KV. to be laid on wall with necessary clamps or in Mtr 1168.57

existing trench / pipe of following size of cables

(I) 3 1/2 core 240 Sq. mm( 120 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Aluminium conductor for

323 165.00 1.1 KV. to be laid on wall with necessary clamps or in Mtr 1407.94

existing trench / pipe of following size of cables

(J) 3 1/2 core 300 Sq.mm ( 150 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Copper conductor for

324 850.00 KV. to be laid on wall with necessary clamps or in Mtr 287.85

existing trench / pipe at road crossing or floor of

following size of cable. (B) 3 core 4 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Copper conductor for

325 150.00 KV. to be laid on wall with necessary clamps or in Mtr 395.92

existing trench / pipe at road crossing or floor of

following size of cable. (C) 3 core 6 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Copper conductor for

326 400.00 KV. to be laid on wall with necessary clamps or in Mtr 676.70

existing trench / pipe at road crossing or floor of

following size of cables. (A) 4 core 10 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Copper conductor for

327 150.00 KV. to be laid on wall with necessary clamps or in Mtr 987.78

existing trench / pipe at road crossing or floor of

following size of cables. (B) 4 core 16 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Copper conductor for

328 250.00 KV. to be laid on wall with necessary clamps or in Mtr 1504.90

existing trench / pipe at road crossing or floor of

following size of cables. (C) 4 core 25 Sq. mm

Making trench in Hard Murrum / Tar Road of suitable

width of 90 cm or required depth for laying any size of

329 250.00 cable or locating the fault all over the run and back Mtr 74.74

filling the same and making the surface as normal

Making trench in Hard Murrum / Tar Road of suitable

330 150.00 width of 90 cm or required depth for laying any size of Mtr 357.54

cable or locating the fault all over the run and back

Item Accoring to

but may be Item Work Unit Tender Rates

filling the same and making the surface as normal

(B) If additional machinery like hammer driller or JCB

Covering of cable with second class bricks or cement

tiles laid cover the cable crosswise & also on both sides

with covering of 7. 5 Cm. layer of sand above & below

cable (16 bricks per meter)

Drilling the road without breaking the road surface

(Asphalt) for laying of cable for feeding power supply

332 50.00 by making up to following size of holes at both ends Mtr 616.10

(B) Up to 150 mm bore dia

Providing and erecting iron clad cable route marker duly

marked with ELE.CABLE of size 23 cm.X 12 cm.

Flushed with ground in cement foundation as directed by

Engineer in charge.

Providing & laying. R.C.C. Hume pipe for cable to be

laid 90 cm. below ground across the road crossing or on

floor with necessary material in an approved manner and

making the ground as per original. (A) 450 mm dia

Providing & laying approved make Double walled

corrugated pipes (DWC) of polyethylene(conforming to

IS 14930 II )with necessary connecting accessories of

same material at required depth in existing trench for

laying of cable. below ground / road surface for

enclosing cable (D)120 mm outer dia.

Providing & laying approved make ISI marked HDPE

6Kg / cm2 (Class-3) as per IS:4984:1995 PE-80 to be

336 60.00 erected at road crossing on or floor as directed for laying Mtr 732.25

of cable. The pipes as following size of dia & weight per

6 mtr. (F) 110 mm inner Dia.

Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured

337 150.00 cable complete without going tails, insulating tape etc EACH 33.33

for following size of cables.

(A) 2 to 4 core 2.5 / 4 Sq. mm

338 100.00 (B) 2 to 4 core 6 Sq. mm EACH 38.38

339 75.00 (C) 2 to 4 core 10 Sq. mm EACH 38.38

340 35.00 (D) 2 to 4 core 16 Sq. mm EACH 47.47

341 35.00 (E) 2 to 4 core 25 Sq. mm EACH 51.51

Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured

342 35.00 cable complete without going tails, insulating tape etc EACH 75.75

for following size of cables.

(B) 3 & 1/2 core 35/50 Sq. mm

Solder less crimping type Aluminium lugs conforming

348 75.00 to IS suitable for cable of following size evenly crimped EACH 20.20

with high pressure tool & connected to switchgear

Item Accoring to

but may be Item Work Unit Tender Rates

terminals with brass/cadmium plated nut bolts in an

approved manner. (D) 35/50 Sq.mm.

Solder less crimping type Copper lugs conforming to IS

suitable for cable of following size evenly crimped with

354 200.00 high pressure tool & connected to switchgear terminals EACH 8.08

with brass/cadmium plated nut bolts in an approved

manner. (A) 1.5/2.5 to 6 Sq.mm

Providing and fixing approved make Perforated C type

cable tray. Made from sheet steel. The cable tray

should be single or double bended as per required and as

per IS 2062/1079 and shall be coated with hot dip

galvanizing as per IS 2629/4759. with max 17.5%

perforation with coupler plate / Fish plate and GI

hardware like nut - bolt and washers etc. erection with

necessary support( included) as per Specification and as

per instruction of engineer in charge..

(5) 300 X 50 X 2.0 mm Thick

Providing and fixing approved make 'T' Junction for

Perforated C type cable tray. Made from sheet steel.

The Junction should be bended as per IS 2062/1079 and

shall be coated with hot dip galvanizing as per IS

360 10.00 2629/4759. with max 17.5% perforation with coupler EACH 291.89

plate / Fish plate and GI hardware like nut - bolt and

washers etc. erected on existing support as per

Specification and as per instruction of engineer in charge

of following size (5) 300 X 50 X 2.0 mm Thick

Providing and fixing approved make '90° Elbow' for

Perforated C type cable tray. Made from sheet steel.

The Junction should be bended as per IS 2062/1079 and

shall be coated with hot dip galvanizing as per IS

362 10.00 2629/4759. with coupler plate / Fish plate and GI EACH 245.43

hardware like nut - bolt and washers etc. erected on

existing support as per Specification and as per

instruction of engineer in charge.. (5) 300 X 50 X

mm Thick 90° Elbow

363 10.00 (6) 450 X 50 X 2.0 mm Thick 90° Elbow EACH 446.42

Providing and fixing approved make '90° Elbow' for

Perforated C type cable tray. Made from sheet steel.

The Junction should be bended as per IS 2062/1079 and

shall be coated with hot dip galvanizing as per IS

2629/4759. with coupler plate / Fish plate and GI

hardware like nut - bolt and washers etc. erected on

existing support as per Specification and as per

instruction of engineer in charge.. (5) 300 X 50 X

Item Accoring to

but may be Item Work Unit Tender Rates

mm Thick Cross Junction

365 10.00 (6) 450 X 50 X 2.0 mm Thick Cross Junction EACH 673.67

Supply, Installation, Testing and Commissioning of

suitable sweep, BEE 5 Star rated, Ceiling fan with Brush

Less Direct Current (BLDC) permanent ferrite magnet

Motor, class of insulation: B, Rust free 3 nos.Aluminium

blades, 2 nos. canopies, shackle kit with earthing

provision, copper winding, Power factor not < 0.9,

Service Value (CMM/W) minimum 6.85, Air delivery

minimum 215 CMM, 350 RPM,230v (tolerance as per

366 324.00 IS : 374-2019), THD < 10%, compitible with electronic each 2629.03

regulator unit for Speed Control and all remaining

accessories including safety pin, nut bolts, washers,

temperature rise = 75 degree C (Max.), suitable for

to 285 Voltage and rectifier circuit with surge, over

current and overload protection , 50 Hz, Single phase

AC Supply, earthing etc. Complete as required.[ Make

shall be approved by Engineer in Charge] (A) 1200 mm

Supplying and erecting 19 / 20 mm. nominal bore

Medium Class M.S. Pipe down rod erected duly painted

for fan complete with proper insulation without leakage

Supplying & erecting Fan Hook of 10 mm M.S. Round

368 324.00 bar grouted in RCC slab with Making the site as each 43.43

Supplying & erecting single phase approved make

industrial exhaust fan suitable for medium duty ring

369 55.00 mounted low noise operation suitable for medium duty each 2054.34

having following dia size and maximum speed in RPM

[A] 305 mm dia 900 RPM cat ii

Providing 2.5mm.thick laminated acrylic sheet to cover

the fan hook or Fan box.

Supplying & erecting approved make low noise

decorative exhaust fan having square frame ABS body

with inbuilt lowers & square frame.250mm with

Supplying & erecting approved make Digital time

switch having lithium cell 6 years operative and operate

battery backup 1 channel day clock with 14 memory

programme, suitable to operate on 240V + 5%, 16A

with, floating contacts Minimum switching setup time

minimum & LCD display. Also comprised permanent

ON/OFF switching. Programming switches & housed in

fire proof thermoplastic enclosure & transparent cover

erected as required with necessary connection erected as

Supplying & erecting power contactor ,AC3 duty for

373 6.00 time switch complete erected as per direction Cat III (C) each 857.49

4 pole 440V 16 Amp.

Supplying and erecting approved make Octagonal pole

made from HR sheet steel. The pole should be made as

374 65.00 per IS. and shall be coated with hot dip galvanizing as each 8192.11

per IS 2629/2633/4759, suitable suspend local wind

speed with integral Junction box consist of terminal

Item Accoring to

but may be Item Work Unit Tender Rates

plate of min 6mm Hylam sheet, standard profile

35mmX7.5mm Din-Rail for MCB Mounting, stud type

terminal and arrangement for cable termination to be

erected With Suitable foundation (Included) as per

details given by manufacturer considering site

(D) 6 Mtr. Long 70 mm Top X 135 mm bottom dia,

mm thickness with 200mmX200mmX12mm base plate,

4-M20 Bolts and 600mm long with necessary G.I. J

Bolts .Approx Pole weight 59 kg

Providing and erecting street light pole bracket

comprising main B Class GI pipe of 4.2 cm/require

outside dia. complete with suitable B Class G.I sleeve

tubing of approx. 45cms.length and suitable for 76.5 mm

/ 80mm. / require size pole top having sufficient

fasteners for fixing the brackets and having spread of

mtr. length with suitable rise as per site condition &

suitable welded stiffener reducer and nipple with check

nut complete painted with one coat of Red oxide / PU

base primer and two coats of Aluminium / PU paint.

paint with following nos of arms.

[A] Single Arm bracket 1 Mtr

376 32.00 [B] Double Arm Bracket 1 Mtr each 829.21

Painting of street light pole with bracket complete with

377 65.00 two coats of Aluminium paint for following size of pole. each 265.63

(B) up to 6 mtr.

Supplying and erecting Direct On-line Electronics

Starter with 2-5/4-10/8-14/10-16 Amp. Rating relay

(variable current setting) directly operated in totally

insulated elegant enclosure and 18 Amp. Rating power

relay with start - stop button for single phase operation

up to 3 HP as per complete erected on P.W. Block with

following features. Low voltage cut off below 140 V

High voltage cut off above 280 V Overload protection

Indicating LEDs for motor on lv, hv & overload

tripping. [Cat.II]

Supplying and erecting push button operated fully

automatic Star-Delta starter with 3 Nos. of 15A.rating

contactors and directly operated thermal overload relay

379 6.00 having 10-21A range and erected in sheet steel each 9758.62

enclosure for 3 phase 415V. 50 c/s. A.C. motors from

7.5 to 15H.P. complete erected on (A) P.W. Block with

necessary connection. Cat.III

Supplying and erecting push button operated fully

automatic Star-Delta starter with 3 Nos. of 15A.rating

contactors and directly operated thermal overload relay

380 6.00 having 10-21A range and erected in sheet steel each 184.83

enclosure for 3 phase 415V. 50 c/s. A.C. motors from

7.5 to 15H.P. complete erected on (B) Angle iron frame

add to the above

Providing & erecting motor protection circuit breaker

with shock proof enclosure (IP 65) erected as per

direction for following motor HP 3 phase 440V A.C.

[B] up to 7.5 HP / 10 HP 12 to 18 Amp.

382 27.00 Supplying and erecting approved make suitable panel each 43.43

Item Accoring to

but may be Item Work Unit Tender Rates

indicator LED type lamp, lens cover, complete erected

with necessary connections.

[D] For 5 HP 3 phase open well horizontal mono block

383 4.00 pump set suitable for 1350 LPM to 310 LPM @ 10 to 42 each 18746.61

Mtr head suitable for 50/65 mm dia delivery pipe

S.I.T.C. of single phase submersible pump set suitable

for 100 mm size or more dia bore well having motor

capacity and discharge as under with necessary panel

384 1.00 box. Lifting and Lowering taken extra.(a) Motor rating 1 each 15595.41

HP (12 stage) pump having capacity of 50 LPM at 43 to

45 mtr head suitable for 32 mm dia. delivery pipe

Providing and erecting ISI marked PVC insulated PVC

Sheathed Flat flexible Submersible copper cable

approved make of following Size. (B) 3 Core x 2.5 Sq.

Providing Water proof straight Joint in PVC insulated

flat flexible copper cable by using insulating material,

water proofing material, & making the joint complete.

Supplying of following size of STANDARD UPVC

column pipe with coupler and wire lock [B] 32 mm dia

Providing, and erecting 11 KV D.P. 9 mtr. high

Structure made of 6" x 3" ‘I’-Section Girder, 4" x

2"channels, clamps, nuts, bolts etc. Suitable for erection

of the followings duly connected with necessary ACSR

conductors. as per drawing approved by the Engineer- in

charge complete with following. Height as per IS 7 Mtr

(A) 11 KV 200 Amps Drop out fuses with S.R.B.P.

tubes carries.-Three nos

(B) 11 KV G.O.D. switch complete with insulators,

operating handle with galvanised pipe, Sq.bar etc.

(C) 11 KV lightening arrestor with clamp- Three Nos.

D) 11 KV shackle insulators- Six Nos.

(E) The above D.P. structure should be earthed with

mm.X 3 mm thick double copper earth strips run

separately and connected with separate copper plate

earth electrode.

Supply of 500 KVA Outdoor type Compact Substation

consisting of Transformer,HT switchgear and LT

Switchgear and confirming to IEC-62227. a)

Transformer: 500 KVA Copper wound 11KV /433 V

DYn11, Dry Cast resin type Transformer with tapping

range +10 to -10% @ 2.5% ( with tolerance), class F

with surge restorers, Digital WTI, IS1171 as per b) HT

389 1.00 Compartment: 11KV, 21kA for 3 Sec . 630 A 50 Hz, each 1666508.08

gas insulated VCB in SS tank in sheet enclosure having

provision for one no. direct connection of Incoming

supply cable upto 300sq mm and one no. VCB(

Manually charging & closing) in series with LBS

between VCB and Transformer, Self Powered Relay

O/C +1 E/F Relay type CSPR-V5, mechanical

ON/OFF indicator, trip coil , Manual Close & Trip PB,

Item Accoring to

but may be Item Work Unit Tender Rates

live cable indicator, mechanical interlocks, pad locking

facility, SF6 gas manometer, cable boots, 3 nos. CTs

with Ratio -/1A, Cl: 5P10, 2.5 VA for protection c) LV

side compartment : one no. ACB of 800A, 50kA, 4Pole,

Microprocessor based release with arrangement for

bottom cable termination (100% for phase & 50% for N,

Current density - 1A/ sq mm) The enclosure should be

of IK10 type.The Enclosure shall construction shall be

GI of thickness at least 1.6/2mm.The enclosure shall be

Powder Coated. Each compartment will be provided

with the door and pad locking arrangement. The

Compartment illumination lamp with door operated

switch shall be provided for each compartment. The

Transformer compartment will have IP-34 ingress

protection, whereas the HT/LT compartment will have

IP-54 protection.The connection between HT and

Transformer shall be by 3 runs of single core 95 sq mm

XLPE aluminium cable and between Transformer to LT

switchgear shall be appropriate rating Aluminium PVC

sleeved Busbar Add extra Rs 9000/- for integrated steel

cubical panel IP 54 to house upto 03 Nos additional

outgoing switchgears with proper rating busbar

drop,supports etc with arrangment for cable termination

etc. (Switchgears is not included in this)

Add extra Rs 16000/- for integrated steel cubical panel

IP 54 to house upto 06 Nos additional outgoing

switchgears with proper rating busbar drop,supports etc

with arrangment for cable termination etc.( Switchgears

is not included in this) Tap of Units

a) Plug in boxes will be draw out type, contacts shall be

silver plated and spring loaded.

b) The front operating handle will be interlocked with

the plug-in boxes cover so that MCCB can be operated

only with suitable cover in close position.

c) The door shall be provided with the door knobs.

d) When the MCCB is in ‘ON’’ position, even with the

door knobs unlocked, the operator should not be able to

remove the box or open the tap off location cover.

e) During insertion, the earth conductor shall make

contact first before the phase conductors. This should

follow the sequence of first in last out concept.

f) When the box is open the live conductors shall be safe

guarded by a transparent insulator plate which allows for

visible inspection but does not allow touching of the live

(A) Aluminium Bus (e)1250 Amp. Capacity

Providing and erecting sandwiched type bus duct having

following specification : Sandwich type busbar for use

as Feeder Busbar for interconnection between separate

electrical equipment/ load centers, and for use as Plug in

390 35.00 busbar risers. The busbar shall be suitable for operation each 13995.57

in a 690V / 1000 V system with frequency of 50 Hz

.System can be either earthed or unearthed. Impulse

voltage should be 12 KV. Standards: The busbar shall be

designed and manufactured in accordance with the

Item Accoring to

but may be Item Work Unit Tender Rates

following international standards for busbar trunking.

-IS 8623/ 1993 Part I & II : Particular requirements of

busbar trunking System

-IEC 61439 Part I & VI : Particular requirements of

busbar trunking System

-IEC- 60529 : Degree of protection TESTING

The busbars shall be type tested at a reputable national /

International test laboratory (ASTA or CPRI) for short

circuit withstand. The test shall be for a minimum

duration of one second.

• Degree of ingress protection (IP rating) shall also be

tested at any reputed independent laboratory. This test

shall be for IP 55 for Indoor and IP 65 for Outdoor

• Short circuit and Degree of protection type test reports

will be submitted for vThe bsubars shall be of high

conductivity Copper of 99.9% pure ETP grade and high

conductivity Aluminium of 99.59% pure 19501 grade.

Where as earth conductor is required, it shall be separate

external earth conductor, of high conductivity

aluminium. Cross section of Earth Conductor shall be as

per IEC 60439. It should be possible to provide a 200%

Neutral where specified. Phase cross over box should

have busbars crossing over each other not cables.

The busbars shall be individually insulated with 2 layers

of insulating film. Layers of POLYSTER material class

‘F’, 155ºC. The housing shall be made of 1.6 mm

electrogalvanised sheet steel, with an epoxy powder

coated paint finish of RAL 7032 grade. Alternatively

Aluminum casing of 2.5mm may also be provided. The

housings shall be profiled, to provide higher strength

and efficient heat dissipation. The width of the housings

shall be same for all ratings of busbars, in order to

provide interchangeability of tap off boxes.

The joints between sections shall be made so as to

provide flexibility during installation and expansion /

contraction of busbar during operation. The joints shall

be of the single bolt type. The joint construction must

have the following features.

a) Thermal expansion of Busbars at joint of at least

b) The joint insulation must be of one piece moulded

design and not have any cut edges which can absorb

c) Joint assembly shall be removable as separate sub-

assembly so that it can be inserted or removed without

disturbing the adjacent sections.

d) The joint system must be designed in a way that the

installer cannot insert the busduct length too far and

damage the bolt insulator.

e) The busbars ends shall not have any holes or slots at

the joints – the electrical continuity shall be through

pressure plates, achieving a high area of joint cross

section and expansion capability.

391 18.00 Providing and fixing printed instruction chart both in each 130.29

Item Accoring to

but may be Item Work Unit Tender Rates

English and Gujarati and duly framed with front glasses,

for treatment of person suffering from Electric shock

with minimum 50" diagonally size.

Providing pair of rubber hand gloves suitable for

working on 11 KV/22 KV supply.

Supplying rubber matting of following thickness as per

IS:15652/IEC 61111 (c)12mm

Supplying stand first AID box with antiseptic cream,

medicine for use on wounds due burn, crepe bandage,

gauge bandage, medicated ready to use bandage (Band-

aid) adhesive tape for medicinal user, Scissors, anti-

septic solution (Savlon or similar) etc. (All above

contents shall be of standard makes)

Providing and erecting ISI Marked 3core 240 Sq.mm

XLPE insulated 11 KV armoured cable Aluminium

395 150.00 conductor IS-7098 to be laid on wall with clamps or in Mtr 2217.96

provided cable trench / pipe approved manner as

Supplying and erecting high tension cable end box

396 5.00 outdoor type suitable. for 11 KV 240Sq.mm 3core H.T. Mtr 4195.54

cable complete with gland bushing and jointing material.

Supplying and erecting, commissioning and testing of

Diesel Generating set confirming to IS: 4722:1968 &

BS:5514 having continuous rating, 3 phase, 415 volts,

50 cycles A.C. supply comprising of a totally enclosed

air/water cooled diesel engine with multi-cylinders

developing suitable BHP not less than following

capacity at 1500 RPM with 10% overload for one hour

in 24 hours with standard accessories like fly wheel,

lubricating oil cooler, "A" class governor, heavy duty

fuel wheel and lubricating oil filter, oil bath air filler,

lubricating oil pressure gauge, end exhaust manifold,

standard set of tools with adjustable spanners, screw

drivers, cylinder head to cover, joint cylinder head to

exhaust, element lube oil filter, 12 / 24 volts electric

starting equipment complete with standard heavy duty