Loading
Loading…
Loading…
Tender Value
₹89.7 L
EMD Value
₹1.8 L
Closing Date
27 Aug 2026, 9:30 pmClosed
Karnataka Power Corporation Limited
SHESHU M
Overhauling of Air Pre Heaters, ID, FD, PA & Scanner Air Fans and associated works of Units 5 to 8 Boilers (3X210MW & 1X250MW) of RTPS (OH-5) for the yer 2026-27
KPCL/2026-27/PS/WORK_INDENT4668
KPCL/2026-27/PS/WORK_INDENT4668
Open
Power stations
Two Tender Document System(Two Cover)
KPCL Executive Engineer BM1 Office RTPS Raichur
9 documents required · 5 mandatory · 4 optional
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
The intending bidder should have satisfactorily completed, as a prime contractor, at least one similar work such as Overhauling of Air Pre Heaters or Fans of Boilers of value not less than Rs. 45 Lakhs in the last five years (i.e 2021-22, 2022-23, 2023-24, 2024-25 & 2025-26) in any Thermal Power Stations of 210 MW or above capacity Units. As a proof of this, the bidder shall upload a single / multiple work orders (Limited to maximum 3 work orders) for a total amount not less than Rs. 45 Lakhs) or corresponding Work Done Certificate issued by competent authority. (Work Order / Work done of previous years shall be given weight at of 10% per year to bring them to the present price level of the financial year 2026-27)
The intending bidder, in his name should have achieved an average annual financial turnover of Rs. 90 Lakhs in at least two financial years during the last five years (i.e 2021-22, 2022-23, 2023-24, 2024-25 & 2025-26). As a proof of this, the bidder shall upload the certified copy of Profit & Loss Account or Turn over Certificates duly certified by the Chartered Accountant. (Financial turnover of previous years shall be given weight at 10% per year to bring them to the present price level of the financial year 2026-27)
₹2,250
₹1.8 L
20 Aug 2026
20 Aug 2026
28 Aug 2026
25 Aug 2026
Overhauling of Air Pre Heaters, ID, FD, PA & Scanner Air Fans and associated works of Units 5 to 8 Boilers (3X210MW & 1X250MW) of RTPS (OH-5) for the yer 2026-27
Water washing of APH baskets (Per APH) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Checking, correcting, levelling of APH Rotors, (Per APH) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Reconditioning or replacement of T bar, Bypass Seal Angle, Rotor Angle and Holding bolts at Hot and Cold End. (Per APH) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Repair/resetting of Hot and Cold End Sector plates, tracking rod mechanism of Hot End, Hot End out board /in board sector plate adjuster boxes, tracking rod boxing arrangement, static seals at sector ...
Servicing of Air Heater Soot Blowers. (Per APH) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Replacement / resetting of Hot and Cold End radial seals / bypass seals / axial seals/rotor post seals. (Per APH) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Servicing of guide bearing and it's Lube oil System (Per APH) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Replacement of guide bearing ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Servicing and alignment of Main drive unit (Per APH) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Replacement / Rectification of eroded pin rack segments /pins. (Per APH) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Reversal of Hot End baskets : (Per basket) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Replacement of Hot End baskets : (Per basket) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Reversal of Hot intermediate End baskets . ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Replacement of Hot intermediate End baskets. ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Servicing of support bearing housing and lube oil system (Per APH) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Replacement of support bearing ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Reconditioning of Cold End baskets(Except AB baskets), gratings including replacement of support grating, if necessary.(Per APH) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Repair of seal plate / liner plate/expansion joints/ducts/I-beams, centre sections and miscelleneous welding and patch work : (Per RMT) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DO...
Rectification/replacement of bracings (Per RMT) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Rectification/replacement of bracing angles (Per RMT) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Water washing of SCAPH :(Per APH) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Replacement of Cold End baskets . ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Deposited hard ash removal in the Cold End AB baskets ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Cleaning of APH ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
FANS :Cleaning of impeller, spiral casing, Fan shaft and painting.(Per ID fan) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Inspection & servicing of fixed and free End bearings, checking of bearing clearance, changing worn out items and oil gaskets for End covers and changing of labryinth seals for DODGE XC/XL Type bearin...
Cleaning of gear couplings between Fan & Hydraulic coupling & Hydraulic coupling & motor,inspection and packing with fresh grease (U-7 only)(Per ID fan) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE U...
Replacement of gear couplings ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Checking alignment between fan and motor & correction if any (U-5,6 &8) (Per ID fan) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Checking alignment between Fan & Hydraulic Coupling & Hydraulic coupling & Motor & making corrections if any (U-7 only)(Per ID fan) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUM...
Cleaning of working oil coolers of Hydraulic coupling, and cleaning of double oil filters (U-7 only)(Per ID fan) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Servicing of lube oil system cleaning of coolers, strainers, filters and overhauling and alignment of lube oil pumps and replacement of lube oil ( U-8 only)(Per ID fan) ---- BIDDDERS ARE REQUESTED TO...
Cleaning of Hydraulic coupling oil tank : (Per Voith coupling) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Inspection and overhauling of VOITH variable speed hydraulic coupling.(Per coupling) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Replacement of fixed/free End 8"dodge bearing liners for ID fan(Per bearing) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Replacement of ID fan VOITH oil cooler tube bundles: ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Assisting in conducting Non-destructive testing of ID fan impeller, spiral casing: (Per ID fan) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Inspection/ rectification and cleaning of ID fan suction and discharge expansion joints:(Per ID fan) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Shifting of FD fan & U-8 PA fan diffuser, expansion joints and repositioning after the verhauling of Main bearing assembly and Servomechanism. Painting of FD fan diffuser joint with Aluminum paint (...
Checking alignment between Fan and Motor and corrections if any (Per FD fan) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Overhauling of servomechanism/ Hydromotor.(Per FD fan) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Overhauling of main bearing assembly(Per FD fan) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Overhauling of blade bearing assembly(Per FD assy) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Servicing of lube oil system: cleaning of coolers, strainers, filters and overhauling / replacement and alignment of lube oil pumps(if required) and replacement of lube oil :(Per FD fan) ---- BIDDDERS...
Removing and Refixing after servicing rectification Rigiflex (fan to motor) couplings: (Per FD Fan) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Replacement of Hydraulic adjustment device in Unit-8. ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Cleaning of internal surface of spiral casing & rotor assembly & painting.(Per PA fan) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Inspection and servicing of fixed and free End bearings ( cleaning & inspection of RT liner, Thrust pads and boxing up).(Per PA fan) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUM...
Servicing of lube oil system, cleaning of coolers, strainers, filters and replacement of lube oil. (Per PA fan) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Checking the alignment of Fan & Motor and corrections if any(Per PA fan) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Replacement of fan to motor coupling . (Per PA fan) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Replacement of fixed/free End 7"dodge bearing liner sets for PA fans: ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Overhauling of hydraulic adjustment device (For U-8 only)(Per PA fan) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Overhauling of main bearing assembly (For U- 8 only):(Per PA fan) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Replacement of hoists for fans and APHs (Per hoist) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Bird and thrash guard cleaning (FD/PA fans silencers/suction screens): ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Fixing of isolation valves for out let and inlet lines ( 80/50 NB) of PA Fan & FD Fan lube oil system cooling water line (Per Valve) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCU...
Servicing of scanner air fans:(Per fan) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Rectification and Servicing of released main bearing of FD fan ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Erection of new approach platform (whereever necessary) (per Sq Mtr) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Supply and usage of consumables asper the List detailed in Annexure-1 ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Bid Document OH-5 2026-27.pdf
Tender Document • 1.48 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .