Supply and Installation of Furniture at JNV Dahod

Classroom Teacher Chair

Classroom Teacher Board

Principal Room Table

Vice Principal Room Table

Principal Room Chair

Principal Room Visitor Chair

Vice Principal Room Chair

Vice Principal Room Visitor Chair

Sofa Foyer one seater

Sofa Foyer Two seater

Sofa Foyer Three seater

Coffee Table

Staffroom Modular knock down type island table

Staffroom Modular knock down type work space

Staffroom chairs

Locker for Principal and Vice Principal

Glass door storage for librabry

Wall mointed open book shelf

Librabry Modular knock down type island table

Library chairs

Computer Work Station

Computer Chairs

Glass door storage for laboratories

Knock down type modular physics laboratory tables

Knock down type modular island physics laboratory tables

Knock down type modular chemistry laboratory tables

Knock down type modular island chemistry laboratory tables

Knock down type modular biology laboratory tables

Knock down type modular island biology laboratory tables

Lab stool

Dining table

Dining bench

Bed partitions

Room wardrobe

Modular kitchen under storage and over head counter

Kind size bed

Side Table

Dining table 6 seater with chairs

Sofa Foyer two seater TEACHER BOARD [Excluding cost of Interactive Flat-Panel Display (IFPD)] Technical Specification for Smart Board with Double-Track Sliding System for Green and White Boards fitted in an Anodised Aluminium Frame with concealed cable management and provision for mounting of Digital Screen: Supply

installation

testing

commissioning (SITC) of an integrated digital teaching–learning solution comprising: (a) Anodised Aluminium Frame

double track sliding system for white & green board and provision for mounting of digital screen with concealed cable management

(b) Vitrified Bid Number : GEM/2025/B/7022877 Dated : 19-12-2025 Bid Document 1/47 magnetic ceramic-steel Green Board and White Board panels. • Dimensions and Configuration: Total Width of the Setup is ~12 feet and height ~4.0 feet from the board surface (excluding the width of aluminium frame). • Material: Providing and fixing anodised aluminium (alloy 6063-T6) framed sliding system for smart board with minimum 2.0 mm thick extruded sections

anodised to AA15 grade as per IS 1868

mounted on a heavy-duty top-hung aluminium track (min. 2.5 mm thick) with sealed ball- bearing nylon/PU rollers (load capacity not less than 120 kg per panel)

concealed bottom guide

EPDM gaskets

SS-304 fasteners

pelmet/valance cover

and soft end-stops/soft- close mechanism

including all brackets

fixings

alignment

cable provisions

commissioning

and making good complete as per drawings and Engineer-in-Charge. • Design: One slot to fix IFPD

other slot for Green & White boards sliding on double track system with Locking facility on sliding frame to keep the IFPD display safe. • Top & Bottom Rails: Tracks shall be aligned and reinforced to ensure boards move easily and without wobble. • Back Side: The backside of the smart board

to concealed the wall surface

provided & fixed with 18 mm thick HDHMR board laminated (white coloured matte finish) with 0.8 mm

edges sealed with 1 mm PVC edge banding

fixed to the anodised aluminium frame with concealed screws/rivets

with ventilation slots as required

and shall be moisture

termite and borer resistant. • Load Capacity: Safe to hold IFPD + white & Green boards with ≥1.5× safety factor. • Cable Management: Built-in channels for power

LAN

HDMI

USB. • Safety: Rounded edges

tamper-resistant covers

concealed fixing. • Finish: Durable

corrosion-resistant coating suitable for indoor use. • Additional Requirements: (a) All boards and the structure must be securely fixed to the wall with appropriate fasteners. (b) Provision for cable management must be included for the IFPD (i.e.

concealed conduit/path for power and data cables).(c) The unit must be free from sharp edges

splinters

or any protruding parts that could cause injury. (d) Installation height should ensure comfortable writing access for average adult and student height (typically bottom edge ~2.5 to 3 feet from the floor). (b) Vitrified magnetic ceramic-steel Green Board and White Board panels: • Function: Boards shall slide horizontally on a top and bottom aluminium/steel channel track to fully cover or reveal the IFP as needed. • Material: Vitrified ceramic- steel

magnetic

double-coated. • Sliding Boards: Quantity: 1 no. Green board & 1 no. White board. • Green Board Surface: Matte

chalk-friendly

stain/scratch resistant. • White Board Surface: Glossy surface

Dry-erase marker friendly

ghost-free

easy clean. • Size: ~6 feet (W) × 4 feet (H) (Each Board) with thickness 8mm. • Frame: Anodised aluminium

rounded edges

concealed fasteners.Note - Dimensions mentioned are indicative. Actual may vary as per site requirements

Supplying and installation of site knock down type Office Table as per approved design and directrion of Engineer-in-charge. Work Top - Work top shall be made 25mm thick Pre-laminated MDF board with decorative lamination on one side and balancing lamination on other side confirming to IS 12406:2003 with post forming on front

back and machine pressed PVC egde banding 2mm thick glued with industrial adhesive and diffused with board monolithically on other two sides. Table top shall have 75mm overhung on front and 25mm overhung on sides. Understructure- C-type leg shall be made of tubular section of 50mm x 50mm x 1.6mm (wall thickness) thick Bid Details 2/47 vertical member and 40mm x40mm x1.6mm (wall thickness) Horizontal M.S. pipe confirming IS-Grade 4932 shall be finished with epoxy polyster powder coated DFT 50- 60 Micron. The legs shall be fitted to the ground with M8 screw leveler with the height adjustment up to 15mm. The cross members shall be mounted by end brackets made of 3mm thick CRCA steel sheet confirming IS 513: 2008 and finished with epoxy polyster powder coated DFT 50-60 Micron confirming IS 13871:1993. Wire management - Electrical wires shall be carried from horizintal vertical duct made of 0.7mm CRCA steel sheet confirming to IS 513:2008. The switch plate or grommet depending upon requirement shall also be provided for electrical/LAN connection on table top. Modesty Panel -Modesty Panel of height 450mm shall be made of 1.5mm thick CRCA sheet sheet confirming to IS 513: 2008 and shall be finised with epoxy polyster powder coated DFT 50-60micron. Storage body- Storage top shall also be made of 25mm thick Pre-lam MDF board confirming to IS 12406:2003 with post forming on two sides and machine pressed PVC egde banding 2 mm thick glued with industrial adhesive and diffused with board monolithically on other two sides. The body of storage units shall be made of 0.8mm thick CRCA steel Sheet and skirting shall be of 1.2mm thick CRCA steel sheet confirming to IS 513: 2008 finished with epoxy powder coated of DFT 50-60 Micron confirming IS 13871:1993. Internal Shelves shall be also made up of 0.8mm CRCA steel sheet confirming to IS 513: 2008 and shall be mounted with the Metal shelf support pin made of 2mm thick CRCA Steel sheet with Nickel or Chrome plating. M10 screw leveler is given with height adjustment up to 12mm to 15mm.

TABLE (SEATING CAPACITY AS PER ACTUAL REQUIREMENT) Supplying and installation of a modular

knock-down center island table sized approximately 3600 mm in length (adjustable to actual requirements) by 1350 mm in width and 750 mm in height

constructed from high-quality 25 mm thick commercial grade plywood or BWR (Boiling Water Resistant) grade plywood with decorative lamination on visible faces and balanced lamination beneath for enhanced strength and moisture resistance. All edges are sealed with 2 mm thick machine-pressed PVC edge banding bonded with industrial adhesive to ensure a seamless

monolithic appearance. The gable ends are fabricated of the same 25 mm thick commercial grade plywood with decorative lamination on both sides and matching edge banding for consistent aesthetics and superior durability. Modesty 18mm matching laminate. The table shall have an underbody vertical support panel running continuously along its length to enhance stability and strength. The understructure uses precision-cut

laminated plywood panels assembled with knock-down fittings for ease of installation and future reconfiguration

ensuring superior load-bearing capacity and long-term durability. A concealed wire management system beneath the worktop integrates pre-laminated plywood cable trays or high-quality plastic trays fixed with durable brackets

complete with provisions for switch plates and grommets to facilitate safe

organized routing of electrical and data cables. All surfaces are finished for scratch and stain resistance with anti-fungal and moisture-resistant properties

and installation will follow best woodworking practices

with final dimensions and seating capacity determined by the actual site layout.

WORK SPACE WITH IN-BUILT LOCKABLE OVERHEAD STORAGE SPACE FOR STAFFROOM (AS PER ACTUAL Bid Details 3/47 REQUIREMENT) Supplying and installation of site knock- down type modular wall-mounted workspace unit of approximate size 900W x 600D x 750H mm (for one staff)

including working counter and lockable overhead storage cabinet of 900W x 450D x 650H mm. The structure shall be made of 18 mm thick BWP grade plywood with decorative laminate on external surfaces and balancing laminate on inner faces conforming to IS:303/IS:12406. All exposed edges shall be sealed with 2 mm PVC edge banding. The worktop shall be 25 mm thick Laminated Plywood board with post-formed front edge and machine-pressed PVC edge banding

securely fixed to the wall using concealed MS cleats and brackets. The overhead cabinet shall be fitted with soft-close concealed hinges

SS handles

and magnetic catchers of approved make

with one adjustable shelf and modular connectors for alignment and expansion to adjoining units. Each workspace shall include provision for electrical connectivity with 6A/16A modular sockets (as per requirement) positioned at approximately 450 mm above finished floor level for easy access. The worktop shall have a circular cable hole (50–60 mm diameter) with grommet for laptop and equipment wiring. All wiring

sockets

and conduits shall be concealed neatly within the table body

routed through internal PVC raceways to maintain a clean

clutter-free appearance. Junction boxes and ducts shall be integrated to provide safe

organized cable management without visible wiring. The entire unit shall be wall-mounted using heavy-duty MS brackets or suitable fasteners based on wall type

finished neatly with matching silicone sealant at all joints. All fittings and hardware

including soft-close hinges and handles

shall be of reputed make. The unit shall be termite-resistant

moisture-resistant

easy to maintain

and made from ISI-marked prime quality boards. The overall layout and detailing shall match the approved reference image

with actual dimensions finalized as per site requirements and direction of the Engineer-in-Charge.

Supply and installation of Glass-door Storage of Size 915 mm (W) x 482mm (D) x 1980mm (H). It should have shelf thickness of 0.8mm

Back thickness of 0.8mm

Door thickness of 0.8mm (high yield strength) with clear glass of > 4.0 mm thick and all other components shall have a thickness of 0.8mm. These components shall be made of CRCA steel sheet ‘D’ grade high yield strength as per IS 513:2008 The glass door storwel shall have a SS handle and a Two-way locking mechanism with shooting bolt. It should have a height-wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base.All metal components would be epoxy polyster powder coated DFT 50-60 Micron confirimg to IS 13871:1993.

Wall mounted built in open book shelf : Overall Size 900L (length may vary as per actual requirement) X300DX2100Hmm

Top made up of 18mm thick Postlam plywood with PVC edge banding

Side panel made up of 18mm thick Postlam plywood with PVC edge bending

Skirting made up of 18mm thick Postlam plywood with PVC edge bending

back panel made up of 18mm thick Postlam plywood

One number of Bottom Storage Cabinets alongwith the complete length of heght 600mm as per ref. image

shelf made up of 18mm thick Postlam plywood with PVC edge bending

all Wooden Panels Fix Joints With Minifix Dowels & other Fitting Equipment

All Wooden Panels Prime Quality Board With ISI Marked. Complete structure design should be as per reference image.

TABLE (SEATING CAPACITY AS PER Bid Details 4/47