REPAIR/ RENOVATION OF RMC OFFICE AND BUNGLOW NO. 07 FOR ERP PROJECT OFFICE.

Amount

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including quoins, arches, pillars etc but excluding ashlar dressed stonework and precast concrete article.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level).

Dismantling boarding, any description, fixed in any position with screws.

Dismantling existing damaged Asbestos cement (corrugated, semi corrugated) sheets in roof covering.

Dismantling single layer Manglore pattern or similar tiles in roofing.

Dismantling battens spaced exc. 15 cm for tiles, shingles etc. of any size including tiling fillets.

Dismantling framed timber scantling in fillets, rails, posts, rafters, purlins etc under 40 sq cm in section.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nanital pattern or similar pattern roof covering.

Demolition and breaking up drain pipes (salt glazed ware, AC or Reinforced concrete) set in cement mortar, internal diameter of pipe 150mm.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store, Bore dia of pipe 15mm.

Taking down shutter of any description exc 1 sqm but n exc 2 sqm each and removing the same of EST(M) section store.

Taking down shutter of any description exc 2 sqm each and removing the same of EST(M) section store.

Surface Excavation not exceeding 30 cm deep and getting out in Hard/ dense soil.

Excavation in trenches n. exe 1.5m wide and n. exe 1.5 in depth; for foundation etc . exe or for manholes etc n. exc 10 sqm on plan and n. exe 1.5m depth and getting out in :- Hard/ Dense soil.

M&L for providing cement concrete type B2 1:2:4 mix (40mm graded aggregate) in foundations, filling and mass concrete.

M&L providing precast cement concrete type C1, 1:3:6 (20mm graded aggregate) in block masonry with solid blocks, exc 10cm width and setting in cement mortar 1:6, complete

M&L providing precast cement concrete type B1, 1:2:4 (20mm graded aggregate) in drain cover slab and similar articles etc. set in cement mortar 1:6.

M&L for deformed or twisted bars, 5mm Dai and over up to 10mm in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces of walls in CM 1:4 including applying, neeru finish to plastering as specified.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces of walls in CM 1:4 including sand faced finish to plastering as specified.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces of walls in CM 1:4 including finishing the plastered surface even and smooth without using extra cement.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces of walls in CM 1:4.

Roughing surfaces of old concrete surface by picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3.0kg of cement per sq meter.

M&L for screed bed or bedding layer of mortar 25mm thick for laying floor finishes in CM 1:4

M/L for Virified Ceramic Tiles 10mm thick (square/ rectangular) polished, area of each tile exc 0.36 sqm but n exc 0.42 sqm, in floors etc in light shade, set jointed in neat cement slurry and pointed in white or coloured cement to match.

M&L for Non-skid coloured cermaic tiles 7mm to 8mm thick (joint free) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match. (Make- Johnson, Rak, Kajaria).

M/L for joint free colouerd Glazed Ceramic tiles in vertical suraces 350 x 250mm x 7mm / 450 x 350 x 7mm/ 450 x 300x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match.

M&L machine cudappa stone slab 20-25mm thick over cement screed base laid and jointed with grey cement slurry with pigment to match the shade of the slab including rubbing and polishing complete.

M&L for 20mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, door frames, window-cill, cooking platform and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite. Type - Telephone black, ruby red or equivalent

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations.

M&L MS Steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St - 240.

M&L 0.63 mm thick Galvanised corrugated m. s. sheeting with two corrugation side lap fixed with L or J type hooks etc

Fixing only, 0.63 mm thick galvanised, corrugated m. s. sheeting with two corrugation side lap fixed with L or J type hooks etc

M&L second class hard-wood in scantlings timber wrought framed and fixed.

Except timber for second class hardwood in scantling in repairs.

S&F 2nd class hard wood battens sectional area exc. 15 & n. exc. 25 sqcm at 25 cm centre to centre.

Fixing only for 2nd class hard wood battens sectional area exc. 15 & n. exc. 25 sqcm at 25 cm centre to centre.

M&L for Roof tiles, Mangalor pattern, interlocking at side joints, laid dry etc.

Fixing Only , Roof tiles , Mangalor pattern, interlocking at side joints, laid dry etc.

M&L for Ridge or hip tiles, Mangalor pattern of roofing tiles, bedded and jointed in cm 1:3 etc.

M&L for Weather boarding of IInd class hardwood, clean swan, plain, 20mm thick or feather edged 15mm to 20mm thick and fixed with 30mm laps.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tappinf screws as specified. Make: JSW, Tata, Essar.

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tappinf screws as specified. Make: JSW, Tata, Essar.

S&F framed worked such as grills, gratings etc with ends of bars shouldered and/or rivetted, or forged into spikes, framed guard bars, barred iron doors, ladders; framed balusters; walk ways; railings; frameworks of water tanks and similar work conforming to be Fe 290. Gde-E-165.

S&F Mild Steel plates (plain or chequered) (Fe-410-W) (Gde-E-250) channels, square cut or notched (ordinary and counter sunk) forming holes, with rivetted or bolted or welded attachment.

S&F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in ssr part I, capacity of tank 2000 lts.

M&L for Hard core of gauge n.exc 63mm deposited, spread, and levelled in layers n.exc 15cm thick, watered and rammed to a true surface using broken stone or boulders.

M&L for murum filling in pavings, laid in layers n. exc 15cm thick. Spread, levelled and rommed inclucluding watering and consolidated.

M&L for providing cement concrete 100mm thick type B1,1:2:4 mix (20mm graded aggregete) in floors including finishing the cement concrete surface even and smooth using extra cement and making it non-sliperry by brooming.

M&L for Cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less

M&L for finishing cement concrete surface even and smooth without using extra cement and making impressions of expended metal whilst the concrete is green.

S&F Anodised Aluminium snap grid frame work for false ceiling all as specified, size of grid 605x605 mm.

M&L for Non asbestos fibre cement plain building boards 6mm thick, fixed or laid or inserted to timber/ GI/ aluminium frame work with screws in ceiling flat or sloping. Make: Charminar, Swastic, Birla.

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type covered with laminated sheet with lipping/ frame to match on both faces.

S&F Aluminium anodised barrel tower bolt of extruded section, length of bolt 200mm.

M/L Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed bolt=375mm.

S&F for mild steel butt hinges, heavy weight, cold rolled. Size of hinges 125mm.

S&F Aluminium handle, cast type anodised, size of handle = 150mm

S&F Door closer hydraulically regulated, designation 2, universal type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 kg, Aluminium (Die Cast) body.

M&L for Stainless steel wire cloth 0.36mm nominal diamater of wire and average width of aperature 1.40mm and fixed with stainless steel wire staples.

M&L for 3.0mm thick sheet glass, ordinary quality and glazing with oil putty in square n. exc 0.5sqm in each pane.

S&F Sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf walls or including fixing cantilever brackets and connecting union to pipe, overall size 495mmx420mm bowl size 410 mm x 330 mm x 160mm.

S&F in repair Vitreous china wash down water closet pan (pedestal pattern) fixed in trap etc complete.

S&F PVC flushing cistern valveless, syphonic action type, low level, white with inlet, ball and valve float and handle including brackets and connection to pipe and fixing lever if any for 10 liter capacity.

S&F viterous china wash hand basin flat back size 630mm x450mm with brackets and pedastal but exculding taps, waste chain and plug and porocelain stopper

S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe).

S & F CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified, for outer dia of pipe 32mm .

S & F CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified, for outer dia of pipe 20mm .

S & F CPVC brass elbow 3/4 x 1/2, for outer dia of pipe 20mm .

S & F CPVC male brass threaded adaptor (MTA/ MBTA), for outer dia of pipe 20mm

S & F CPVC female brass threaded adaptor (FTA/ FBTA), for outer dia of pipe 32mm.

S & F CPVC female brass threaded adaptor (FTA/ FBTA), for outer dia of pipe 20mm

S & F PP- R Gate valve (brass inserted as per requirement at site, outer dia of pipe 32mm.

S & F PP- R Gate valve (brass inserted as per requirement at site, outer dia of pipe 20mm.

S&F low density polyethylene (LDPE) pipes or pressure rating 6 kgs/sq.cm fixed complete to walls, ceiling or in floors etc. bore of tube 32 mm.

S&F chromium plated fancy type Bib taps cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipes or brass ferrule and fixed, bore dia of pipe 15mm.

S&F fancy type Pillar taps cast copper alloy chromium plated screwed down high pr. with or without lettered 'hot' & 'cold' with long screw shank and fly nuts, screwed for pipe and fixed in repair, bore dia of pipe 15mm.

S&F chromium plated fancy type stop valves cast copper alloy, screwed down high pr. with crutch or butterfly handle screw both ends for iron pipes or for unions and fixed in repairs bore dia of pipe 15mm.

S&F waste fittings brass chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed loose of pipe 32mm.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, bore of pipe 110mm.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, bore of pipe 75mm.

S&F PVC bends without access door bore of pipe 75mm.

S&F PVC bends without access door bore of pipe 110mm.

S&F PVC single Tee with access door bore of pipe 110mm.

S&F PVC (SWR) floor trap with grating including jointing to waste pipe with solvent cement diameter of outlet = 75mm.

M&L for providing concrete bed to drain pipes including forming cradles in cement concrete 1:3:6: type C2 (40mm graded aggregate) Bore of pipe 150 mm.

M&L for Reinforced concrete drain pipe (for sewer and drains) of class NP2 laid and jointed complete with collors, including testing drains as specified by filling the pipes with waater to a head of 1.5m at the highest point including tempararily fixing of bends, etc as required. Bore of pipe 150 mm

M&L for providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surfaces even and smooth.

S&F Powder coated Anodised Aluminium frame for doors, window, ventilaors and partitions with one or more rebates including joining cleat for fixing etc all as specified.

S&F Powder coated Anodised Aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified.

S&F Powder coated Anodised Aluminium window and ventilator shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21 100mm long (2 Nos), suitable handle (1 Nos) complete all as specified.

M&L for 3.0mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5sqm in each pane.

M&L for 4.80mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5sqm in each pane.

M&L for 12mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination, fixed with screws to timber frame work or aluminium frame work.

Taking down shutter of any description exc 1 sqm but n exc 2 sqm each and refixing in same opening after resecuring or easing and adjusting for height.

M&L for preparing plastered or unplastered new surfaces and applying two coats of oil emulsion distemper on ceiling over one coat of alkali resistant primer.

M&L for preparing plastered or unplastered new surfaces and applying two coats of oil emulsion distemper on walls over one coat of primer with alkali resistant.

M&L for finishing walls with Acrylic smooth exterior paint of required shade: New work (Two or more coat applied @ 1.67 ltr/ 10 Sqm over and including priming coat of exterior primer applied @2.20 kg/ 10 Sqm)

M&L for preparing old painted surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint on wood or wood based surfaces.

M&L for preparing old painted surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over steel and iron surfaces.

M&L for preparation of new or previously untreated steel or iron surfaces of any description, not otherwise mentioned over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer.

Removing surplus excavted and demolished material to a distance exc 500m but n exc 1.5 km and depositing where directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to EM store for keeping in safe custody and making good disturbed surfaces of walls, floors, etc.

M&L for Point wiring in PVC casing & Capping for one light point / one fan point /Bell point controlled by one switch with PVC insulated stranded copper conductor (FR class 2) wire 1.5 sq. mm size. (Make of wire - Polycab, Finolex, KEI, RR Kabel & PVC Casing & Capping - Modi, Press fit only.)

M&L Point wiring in PVC casing & Capping for one 3 pin socket / MCB DB outlet, 15 Amps, independent with stranded copper conductor wire (FR class 2) of 4 sq. mm size. (Make of wire - Polycab, Finolex, KEI, RR Kabel & PVC casing & Capping- Modi, Press fit only.)

M&L Point wiring in PVC casing & Capping for one 3 pin socket outlet, 5 Amps, independent with stranded copper conductor wire (FR Class 2) of 2.5 sq. mm size. (Make of wire - Polycab, Finolex, KEI, RR Kabel & PVC casing & Capping- Modi, Press fit only.)

M&L for Point wiring with stranded copper conductor in PVC Casing & Capping for one 3 pin socket out let 5Amp. on the same board with other switches with FR Class 2, wire 2.5 sq. mm size. (Make of wire - Polycab, Finolex, KEI, RR Kabel & PVC casing & Capping- Modi, Press fit only.)

S&F modular switch, 1 way, 6A, 1 module. Make- Legrand/ Anchor- Roma/ L&T only.

S&F modular socket, 6A - 2/3 pin combined, 2 module. Make- Legrand/ Anchor- Roma/ L&T only.

S&F modular switch, 1 way, 16 Amps, 1 module. Make- Legrand/ Anchor- Roma/ L&T only.

S&F modular socket, 6A/16A - 2/3 pin combined 2 module. Make- Legrand/ Anchor- Roma/ L&T only.

S&F bell, (Ding - dong Type) AC 230V, single pole. Make- Cona, Anchor, Havell's only

S&F modular bell push, 6A, 1 module . Make- Legrand/Anchor- Roma/L&T only.

S&F modular metal / Plastic /PVC Heavy duty flush box,12 module.

S&F modular white cover plate with frame , 12 module. Make- Legrand/Anchor- Roma/L&T only.

S&F modular metal / Plastic/PVC Heavy duty flush box, 8 module.

S&F modular white cover plate with frame , 8 module. Make- Legrand, Anchor Roma, Havell's only.

S&F modular metal / Plastic /PVC Heavy duty flush box, 6 module.

S&F modular white cover plate with frame , 6 module. Make- Legrand/Anchor- Roma/L&T only.

S&F modular metal / Plastic/PVC Heavy duty flush box, 3 module.

S&F modular white cover plate with frame , 3 module. Make- Legrand/ Anchor- Roma/ L&T only.

S&F modular metal/ Plastic/ PVC Heavy duty flush box, 2 module.

S&F modular white cover plate with frame , 2 module. Make- Legrand/Anchor- Roma/L&T only.

S&F modular metal / Plastic /PVC Heavy duty flush box, 1 module.

S&F modular white cover plate with frame , 1 module. Make- Legrand/Anchor- Roma/L&T only.

S&F Celling rose with plate/ board, 3 point, PVC /Polycarbonate, Isolated body. Make- Legrand/ Anchor- Roma/ L&T only.

S&F Lamp holder, angular/batten , PVC/Polycarbonate type with back plate suitable for batten fittings. Make- Legrand/ Anchor- Roma/ L&T only.

S&F LED light luminaire 600mmx600mm 35/36 watt, 220 Volt AC, recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holder & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. (including connector). Make : Bajaj, Syska, Crompton, Orient only.

S&F LED light fitting 1 x 20 watt, 220 volt, AC, decorative box type with driver, holder indcluding LED tube lights connecting up with 3 core flexible copper conductor cable of suitable size from ceuling rose complete. Make : Bajaj, Syska, Crompton, Orient, only.

S&F exhaust fan, steel body AC single phase, 230 V, of size 300 mm sweep with, blades and frame and louvers, Make Almonard, Crompton, Bajaj, Havell's.

S&F wall mounting fans complete with bracket and wiring , other accessories, 230 volt, 400 mm sweep, Energy efficient, five star rated with brush less direct current motor (BLDC) prewired up to connection. Make- Automberg, Havell's, Orient, Crompton, Usha only.

S&F ceiling fans complete with 3 blades, Required down road 1 to 5 feet as per requirement, electronic regulator / remote control for speed control, other accessories, 230 volt, 1200 mm sweep, Energy efficient, five star rated with brush less direct current motor (BLDC) of wattage range between 26 to 32 watt, prewired up to connection of make Automberg, Orient, Havell's, Crompton only.

S&F LED Street light fittings 60 watt, 230 V, AC outdoor type with high pressure die cast aluminium housing and heat resistance complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete of make Syska, Orient, Crompton etc.

M&L Wiring for circuit/sub main wiring along with earth wire with 2X6 Sq. mm + 1X6 sq. mm earth wire size of FR PVC insulated stranded copper conductor, single core cable in surface/recessed as required in PVC Casing & Capping. Make of wire- Polycab/ Finolex/ KEI/ RR Kabel only. make of Casing capping - Modi, Press fit only.

M&L Wiring for circuit/sub main wiring along with earth wire with 2X4 Sq. mm + 1X4 sq. mm earth wire sizes of FR PVC insulated stranded copper conductor, single core cable in surface/recessed as required in PVC Casing & Capping. Make of wire- Polycab/ Finolex/ KEI/ RR Kabel only. make of Casing capping - Modi, Press fit only

S&F single pole and neutral encloser with a two pin and earth plug and socket complete with one single pole 20/25 Amp MCB, Suitable for AC connection, Make - Legrand/ Indo asian/ Schneider/ ABB/ L&T only.

S&F sheet metal encloser, single door MCB DB, Three phase, 4-way, for One MCB FP and 4 MCB TP, with neutral link, Make - Legrand/Indoasian/Schneider/ABB/L&T only.

S&F sheet metal encloser, single door MCB DB, single phase, 8-way with neutral link, Make - Legrand/ Indoasian/ Schneider/ ABB/ L&T only.

S&F MCCB, 3 Pole 415V, adjustable type 160Amps with breaking capacity 36KA with enclosure.

S&F RCBOs Earth leakage, Overload & Short- Circuit Protection 100 mA, Double pole, 40 Amp. 240V, complete with connection, testing and commissioning. Make - Legrand/ Indo asian/ Schneider/ ABB/ L&T only.

S&F MCB, C-Curve, 10kA, (MCB TPN), 440V, 40 to 100 Amp complete with connection, testing and commissioning. Make - Legrand/ Indo asian/ Schneider/ ABB/ L&T only.

S&F MCB, C-Curve, 10kA, three Pole (MCB TP), 415V, 25-63Amp complete with connection testing and commissioning. Make - Legrand/ Indo asian/ Schneider/ ABB/ L&T only.

S&F MCB, C-Curve, 10kA, Single Pole (MCB SP), 240V, 6-32A complete with connection DB, testing and commissioning. Make - Legrand/ Indo asian/ Schneider/ ABB/ L&T only.

S&F Meter box of size width - (W) 500 to 600mm, Height -(H) 500 to 600 mm, (D) Depth 300 to 350mm, surface mounted, electrical encloser, minimum 20 SWG MS sheet with doors and all mechanical fittings, Powder coated, Rust Résistance, High Strength, suitable for fixing Energy meters and Distribution boards. including fixing on wall with proper grouting.

Excavation in trenches n. exceeding 1.5 m wide and n. exceeding 1.5 m depth and getting out in Hard soil.

Excavation in trenches n. exceeding 1.5 m wide and n. exceeding 1.5 m depth and getting out in Soft rock.

Excavation in trenches n exceeding 1.5 m wide and deep beyond first 1.5m depth and getting out in Hard rock.

M&L sand filling under floor/ cushioning of the underground cable or in foundation including watering and consolidation.

M&L Earthing complete with galvanized iron earth plate electrode 60X60cmX6mm thick, buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to GI earth lead strip of size 25X4 mm by means of bolts, nuts, check nuts, and washers of galvanized iron or steel all as shown in electrical plate No. 5 connected to earthing test point all as specified with material or indicated including testing on completion.

S&F galvanized tubes medium grade 15mm bore.

M&L for Brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6.

M&L for Rendering 10mm thick on fair faces of brickwork or concrete surface in cement plaster 1:4.

S&F Cast iron work grade FG 150 unmachined , in brackets, gully traps, grating railings, frames ,manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, part of ranges balusters and similar articles n exc 5 kg each.

Returning filling in, including spreading, levelling, watering, and well ramming in layers of hard soil

S&F Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4 mm dia galvanized iron or steel wire.

M&L for 50 sq. mm 1100V XLPE insulated armoured 3 1/2 core power cable with aluminium conductor. Make- Polycab, RPG, CCI, Havell's, KEI only.

M&L for 35 sq. mm 1100V XLPE insulated armoured 3 1/2 core power cable with aluminium conductor. Make- Polycab, RPG, CCI, Havell's, KEI only.

S&L in trenches galvanised steel tubes, medium grade size 100 mm, include for one plain socket to each length of pipe. Make:- Tata, JSPL only.

S&L reinforced precast concrete cable cover, class LV, Type-I flat size 250mm X 150mm X 40mm.

Supply, installation & commissioning of Telephone EPABX system NEC Make:Tadiran/ Siemens/ Alka Tech with 4 Nos. of 24 keys Key phone for operator. As per annexuture B

Telephone wiring. As per Anneture B

Credit Item-Unserviceable wiring materials including ceiling rose, 5/15 A switch, socket, PVC conduit pipe, wooden batten,

Credit Item-Unserviceable sub main wiring.

Credit Item-Unserviceable light fittings any type and any size.

UNICON

V C SHETH