Development of Smart Road from Bus Stand to Education Board at Dharamshala

Amount

Dismantling of existing structures like culverts, bridges, retaining walls, and other structures comprising of the following and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned to all leads and lifts.:Cement Concrete

Dismantling of existing structures like culverts, bridges, retaining walls, and other structures comprising of the following and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned to all leads and lifts.:Stone / Brick Masonry

Dismantling of existing structures like culverts, bridges, retaining walls, and other structures comprising of the following and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned to all leads and lifts.:Steel work

Dismantling of existing structures like culverts, bridges, retaining walls, and other structures comprising of the following and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned to all leads and lifts.:Kerb Stone

Dismantling of existing structures like culverts, bridges, retaining walls, and other structures comprising of the following and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned to all leads and lifts.:Fencing

Dismantling of existing structures like culverts, bridges, retaining walls, and other structures comprising of the following and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned to all leads and lifts.:Flexible pavements

Earthwork in the excavation of the foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, and backfilling with an approved material including dewatering & disposal off unserviceable material as per the direction of Engineer-in-charge.-All kinds of soil/ordinary Rocks

Excavation for roadwork in all kinds of soil/rock with a hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades, and cross sections, and transporting to the embankment location up to all lifts and leads as per the direction of Engineer-in-charge.

Earthwork in the excavation of the foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, and backfilling with an approved material including stacking off serviceable material and disposal off unserviceable material as per the direction of Engineer-in-charge. Hard Rock (blasting prohibited).

Earthwork in the excavation of the foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, and backfilling with an approved material including stacking off serviceable material and disposal off unserviceable material as per the direction of Engineer-in-charge. Hard Rock (blasting prohibited).

Providing and laying Plain/Reinforced M15 Grade Cement Concrete in all works like retaining walls/coping/cornices/corbel/conc. band etc. including curing for 14 days with carriage of material up to all leads and lift as per the direction of the Engineer-in-charge.

Providing and laying Reinforced Cement Concrete (RCC Grade M20) for all works complete all as per Drawing and Technical Specifications.:-With Batching Plant, Transit Mixer, and Concrete Pump including carriage of material up to all leads and lift as per the direction of the Engineer-in-charge.

Providing and laying Reinforced Cement Concrete (RCC Grade M25) for all works complete as per Drawing and Technical Specifications.:-With Batching Plant, Transit Mixer and Concrete Pump including carriage of material up to all leads and lift as per the direction of the Engineer-in-charge.

Supplying, fitting and placing Fe-550D TMT bar reinforcement in sub-structure complete as per drawing and Technical Specifications including carriage of material up to all leads and lift as per the direction of the Engineer-in-charge.

Providing and placing weep holes in R.C.C drain with 50 mm dia PVC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing face. Complete as per drawing and Technical Specifications including carriage of material up to all leads and lift as per the direction of the Engineer-in-charge.

Providing and Laying cement concrete 1:4:8 with 15% plums and curing complete including the cost of formwork for plain/reinforced concrete in retaining walls, breast walls, the size of plum should be 150 to 300 mm as per drawing and HP.PWD technical specifications including carriage of material up to all leads and lift as per the direction of the Engineer-in-charge.

Providing and laying Cement Concrete Pipe 600mm dia NP3 (buried conduits) on first class bedding of granular material including fixing collar with cement sand mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry work in head wall and parapets.(Utility crossing) including carriage of material up to all leads and lift as per the direction of the Engineer-in-charge.

Providing and laying heavy-duty precast cement concrete interlocking paver blocks vibro compacted up to M-35 grade over service corridor with cement mortar 1:4 (1 Cement: 4 Sand) i/c concrete edge strip or kerb block grey or coloured:- 60mm thick as per design pattern and colour approved including carriage of material up to all leads and lift as per the direction of the Engineer-in-charge.

Providing and laying chequered precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning, etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) including carriage of material up to all leads and lift as per the direction of the Engineer-in-charge.

Providing and construction of Stone masonry work in cement mortar 1:3 for substructure complete as per drawing and Technical Specifications including carriage of material up to all leads and lift as per the direction of the Engineer-in-charge.

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia PVC pipe, extending through the full width of the structure with the slope of 1V:20H towards the drawing face. Complete as per drawing and Technical Specifications.

Providing and back filling behind abutment, wing wall and return wall or similar works etc. complete as per drawing and Technical Specification including carriage of material up to all leads and lift as per the direction of the Engineer-in-charge.

Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRT&H specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification including carriage of material up to all leads and lift as per the direction of the Engineer-in-charge.

Making lawns including ploughing and breaking of clod, removal of rubbish, dressing and supplying doobs grass roots and planting at 15 cm apart, including supplying and spreading of farm yard manure at rate of 0.18 cum per 100 sqm including carriage of material up to all leads and lift as per the direction of the Engineer-in-charge.

Providing and construction of brickwork with cement mortar of 1:4 (1: Cement: 4 Sand)common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in the superstructure above plinth level up to floor V level in all shapes and sizes, No separate measurement shall be taken for half brick wall & any other decorative work. Work is including carriage of material up to all leads and lifts and as directed by the Engineer-in-charge.

Clearing culverts and cross drains of all debris and repairing as required including cost of all tools and materials for repairing, to the satisfaction of the Engineer, complete including disposal off the material up to all leads and lift as per the direction of the Engineer-in-charge.

Relocating of existing pipes with required fittings including trenching and refilling etc. on service corridor complete all as per drawing and technical specification and as directed by Engineer-in charge:-External work

Providing and fixing 15 mm dia nominal bore G.I. pipes complete with G.I. fittings including trenching and refilling etc.:-External work including carriage of material up to all leads and lift as per the direction of the Engineer-in-charge.

Providing and plastering of 15 mm cement plaster on the rough/fair side of brick/stone/concrete surface of the mix: 1:4 (1 cement: 4 fine sand) including plaster on the cornice, corbels, and any decorative part. No separate measurement shall be taken for cornice, corbel, etc. including ofcarriage of material up to all leads and lift as per the direction of the Engineer-in-charge.

Providing and laying damp proof course 50mm thick on compound wall where Kangra painting work is required with cement concrete 1:2:4 (1 cement:2 sand:4 stone aggregate 12.5mm nominal size) and curing complete including carriage of material up to all leads and lift as per the direction of the Engineer-in-charge.

Providing and laying 8-10 mm thick Stone finish ceramic external wall tile on compound/Retaining wall etc. with 12 mm thick cement and MYK LATECRETE (315 plus) or equivalent wall tile adhesive with an appropriate ratio as per manufacturer specifications. The joints of the tile should be filled up with white cement/epoxy grouting complete all as per drawing and technical specification including carriage of material up to all leads and lift as per the direction of the Engineer-in-charge.

Kangra Wall painting enamel based of approved brand including primer, base coat and thoroughly brushing the surface free from mortar dropping and other foreign matter on wall complete all as directed by Engineer-in-charge.

Providing and construction of sub-grade and earthen shoulders approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2 including carriage of material up to all leads and lift as per the direction of the Engineer-in-charge.

Providing and construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 including carriage of material up to all leads and lift as per the direction of the Engineer-in-charge.

Providing and construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401. (Utility crossing & Road work) including carriage of material up to all leads and lift as per the direction of the Engineer-in-charge.

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. (Utility crossing & Road work) including carriage of material up to all leads and lift as per the direction of the Engineer-in-charge.

Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means including carriage of material up to all leads and lift as per the direction of the Engineer-in-charge.

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom including carriage of material up to all leads and lift as per the direction of the Engineer-in-charge.

Providing and laying Dense graded bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 to 4.5 percent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT&H specification clause No. 507 complete in all respects including carriage of material up to all leads and lift as per the direction of the Engineer-in-charge.

Providing and laying Bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects including carriage of material up to all leads and lift as per the direction of the Engineer-in-charge.

Providing table top pedestrian crossing including laying heavy duty precast cement concrete inter locking paver blocks with edge strip or kerb block grey or coloured over sub-base of concrete with 25mm thick average thickness of cement mortar 1:4 (1 cement : 4 sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curing rubbing & polishing on WMM base complete as per drawing and specifications including carriage of material up to all leads and lift as per the direction of the Engineer-in-charge.

Providing and applying of priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content:- With water thinnable cement primer having VOC content less than 50 grams/litre on Road Kerbs/drain wall etc. as per specifications including carriage of material up to all leads and lift as per the direction of the Engineer-in-charge.

Providing and painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour:- Two Coat on Road Kerbs/drain wall as per specifications including carriage of material up to all leads and lift as per the direction of the Engineer-in-charge.

Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing including carriage of material up to all leads and lift as per the direction of the Engineer-in-charge.

Providing and erecting overhead signs with a corrosion resistant 2mm thick aluminium alloy sheet reflectorised with high intensity retro-reflective sheeting of encapsulated lense type with vertical and lateral clearance given in clause 802.2 and 802.3 and installed as per clause 802.7 over a designed support system of aluminium alloy or galvanised steel trestles and trusses of sections and type as per structural design requirements and approved plans including carriage of material up to all leads and lift as per the direction of the Engineer-in-charge.

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing including carriage of material up to all leads and lift as per the direction of the Engineer-in-charge.900 mm equilateral & triangle

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing including carriage of material up to all leads and lift as per the direction of the Engineer-in-charge.600 mm circular

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing including carriage of material up to all leads and lift as per the direction of the Engineer-in-charge.600 mm x 450 mm rectangular

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing including carriage of material up to all leads and lift as per the direction of the Engineer-in-charge.900 mm side octagon

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes including carriage of material up to all leads and lift as per the direction of the Engineer-in-charge.

Provision of 15 no's rumble strips covered with premix bituminous carpet, 15-20 mm high at centre, 250 mm wide placed at 1 m centre to centre at approved locations to control speed, marked with white strips of road marking paint. (measured flat) including carriage of material up to all leads and lift as per the direction of the Engineer-in-charge.

Providing and fixing Glow studs of size 90x100x17 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite ) or HIP (High impact polystyrene) or ABS having electronically welded micro-prismatic lens with abrasion resistant coating as approved by Engineer in charge. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retro- reflective surface shall be 35 (+/-5) degress to base .The reflective panels on both sides with at least 12 cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS: 873 part 4 : 1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge.

Providing and fixing 3 Seater RCC Benches 1500 mm long along the footpath including carriage of material up to all leads and lift as per the direction of the Engineer-in-charge. The design and pattern of benches shall be approved by DSCL Authority.

Providing and fixing precast RCC Tree grating around the trees of different size girths along the Road/footpath including carriage of material up to all leads and lift as per the direction of the Engineer-in-charge.

Removing old paint of existing benches and repainting the benches along the Road/footpath

Construction of Pole Foundation for 6m high Street Light pole complete all as per drawing and technical specification and as directed by Engineer-in-charge.

Construction of Pole Foundation for 12m High Mast Street Light on junction complete all as per drawing and technical specification and as directed by Engineer-in-charge.

Foundation for Traffic signals as per drawing and technical specification including carriage of material up to all leads and lift as per the direction of the Engineer-in-charge.

Foundation for Blinkers as per drawing and technical specification including carriage of material up to all leads and lift as per the direction of the Engineer-in-charge.

Providing and applying priming coat over new steel & other metal surface after & including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete with ready mixed priming paint brushing red lead, Red-oxide / zinc oxide chrome including carriage of material up to all leads and lift as per the direction of the Engineer-in-charge.

Providing and applying white cement-based waterproof putty of average thickness 2mm of approved brand and manufacturer over the RCC/plastered surface complete all as per drawing and technical specification and as directed by Engineer-in-charge.

Providing and Finishing walls with waterproofing cement paint of approved brand and manufacture and of required shade on undecorated wall surfaces (two coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including carriage of material up to all lead and lift as per direction of Engineer-in-charge required shade: New Work (Two or more coats)

Providing and laying RCC Precast Factory Made Cover 600mm wide 150mm thick (Heavy Duty) over storm water drain with M-20 Grade including steel as per approved drawing including carriage placing in position in all lead and lifts and making necessary arrangements or inspection as per direction of Engineer-In-Charge.

Providing and laying RCC Precast Factory Made Cover 940mm wide 150mm thick (Light Duty) over Electric Duct with M-20 Grade including steel as per approved drawing including carriage placing in position in all lead and lifts and making necessary arrangements or inspection as per direction of Engineer-In-Charge.

Providing and laying RCC Precast Factory Made Cover 870mm wide 150mm thick over Electric Duct (Heavy Duty) with M-20 Grade including steel as per approved drawing including carriage placing in position in all lead and lifts and making necessary arrangements or inspection as per direction of Engineer-In-Charge.

Providing and laying 20mm thick Slate flooring as per approved pattern having size of 450x300 with 150x150mm texture tile/quartz on 20mm (average) thick base of cement mortar 1:4 (1 Cement: 4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, grooving and pointing complete with carriage of material up to all leads and lifts and as per direction of Engineer-In-Charge.

Providing and erection of structural steelwork welded in built-up section /framed work/ Tubular section, including cutting, hoisting, and fixing in position:- In grating, truss, frames, guard bar, ladder, railing brackets gates, and similar work including carriage of material up to all leads and lifts and as per direction of Engineer-In-Charge.

Providing and laying of cement concrete Pipe 300mm dia NP3 (buried conduits) on first class bedding of granular material including fixing collar with cement sand mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry work in head wall and parapets.(Utility crossing) including carriage of material up to all leads and lifts and as per direction of Engineer-In-Charge.

Providing and fixing Cast Iron ornamental Railing/bollard and other similar works, including welding, buffing, grinding etc. finished with priming & painting complete all as per drawing and technical specification including carriage of material up to all leads and lifts as per the direction of Engineer-in charge.

Supply and fixing of Sewerage Pipes includes all fittings as required complete all as per drawing and technical specification including carriage of material up to all leads and lifts as per the direction of Engineer-in charge.

Providing and fixing name plate with all fittings and accessories complete all as per drawing and technical specification including carriage of material up to all leads and lifts as per the direction of Engineer-in charge.

Providing and fixing LED Lights including wiring with all fittings and accessories as required complete all as per drawing and technical specification including carriage of material up to all leads and lifts as per the direction of Engineer-in charge.

Providing woodwork in frames of doors, windows, clerestory, windows and other frames wrought, framed and fixed in position with hold fast lugs or dash fastener of required dia and length -Deodar wood 1st class including wastage with carriage of material up to all leads and lifts as per the direction of Engineer-in charge.

Providing and fixing stone-coated shingles sheet roofing over steel structure truss. i/c fixing with necessary arrangement complete with all accessories as required and as directed by Engineer-in-charge and colour & pattern as decided by DSCL/competent authority including carriage of material up to all leads and lifts as per the direction of Engineer-in charge.

Providing and fixing 12 mm thick prelaminated particle board flat pressed three-layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters, and partition frames with C.P. brass / stainless steel screws, etc. complete as per architectural drawings and directions of engineer-in-charge. :-Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side including carriage of material up to all leads and lifts as per the direction of Engineer-in charge.

Providing and polishing on wood work with the ready mixed wax polish of approved brand and manufacture : New Work including carriage of material up to all leads and lifts as per the direction of Engineer-in charge.

Providing and construction of stone work for plain ashlar in super structure up to floor 5 level in cement mortar 1:3 (1 cement:3 sand) including centring shuttering and pointing with white cement mortar 1:2 (1 white cement:2 stone dust) with an adhesive of pigment matching the stone shade one face should be dressed : White Sand Stone including carriage of material up to all leads and lifts as per the direction of Engineer-in charge.

JV OF RAJNISH INFRATECH OPC P LTD AND LNA INFRAPROJECTS P LTD

RK Gupta AND CO