Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.6 LAccepted-AOC 5D 32B GALI NO 8 VISHNU GARDEN TILAK NAGAR WEST DELHI 110018 | DELHI | WEST DELHI | DELHI | 110018 | L1 | Accepted-AOC AOC accepted. | |
| 2 | L2₹47.0 L+₹3.4 L (7.82%)Rejected-AOC 63 MANDIR LANE BALLUPUR CHOWK DEHRADUN 248001 | DEHRADUN | UTTARAKHAND | 248001 | L2 | Rejected-AOC AOC rejected. |
Tender Value
₹49.4 L
EMD Value
₹98,700
Closing Date
23 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Dehradun
GE (MES) Dehradun, Garhi Cantt, Mall Road, Tele - 01352750580
Day to day maint and petty repairs of OTM and Md Accn under AGE B/R-I of GE Dehradun.
2022_MES_522967_2
8457/A/E8
Open Tender
Civil Works
Item Rate
180 days
GE Dehradun
Class D cat a (i)
8 documents required · 8 mandatory
₹500
GE Dehradun
₹98,700
10 Oct 2022
4 Jun 2022
25 Jun 2022
4 Jun 2022
23 Jun 2022
11 Jun 2022
Amount
Dismantling / taking down 15 mm dia unserviceable bib cock/ stop cock/Pillar cock/Angle cock of any pattern or of any type and removing from site
Dismantling / taking down 15 mm dia bib cock / stop cock/Pillar Cock/Angle cock of any pattern or of any type and re-fixing the same after minor repairs such as replacement of washers and major repair such as jumper brass, spandle/ caps etc or refixing old serviceable bib cocks/ stop cocks/ pillar cock/angle cock any pattern. Note - Any major parts such as jumpers brass/ spindles/ caps any type etc to be measured as supply only in conjuction with this item and paid for accordingly)
Supply only Jumper Washer
Supply only Brass spindals
Supply only Caps
Supply and fixing bib cock PTMT standard 15 mm dia with capastan head complete male or female as reqd and as directed by Engineer Incharge, Make 'Prayag' or equivalent in Pearl/ prabhat.
Supply and fixing bib cock brass chromium plated 15 mm dia with capastan head, screwed down high pressure complete. Make Prayag,or Equivalent in Pearl/ prabhat..
Supply and fixing stop cock brass/ cast copper alloy 15 mm dia with crutch or butterfly handle, screwed down high pressure complete. Make Prayag,or Equivalent in Pearl/ prabhat..
Supply and fixing stop cock PTMT standard 15 mm dia with capastan head , complete male or female as reqd and as directed by Engineer Incharge Make Prayag or Equivalent in Pearl/ prabhat.
Supply and fixing 15 mm dia angle cock/ angle valve chromium plated with capstain head screwed down high pressure complete. Make Prayag or Equivalent in Pearl/ prabhat..
Dismantling / taking down 20 mm dia unserviceable stop cock/Bib cock etc of any pattern or of any type and removing from site
Dismantling / taking down 20 mm dia stop cock/Bib cock of any pattern or of any type and re-fixing the same after minor repairs such as replacement of washers etc and major repair such as jumper brass, spindals , capy any type or refixing old serviceable stop cocks any pattern (any major parts such as jumpers brass/ spindles etc to be measured as supply only in conjuction with this item and paid for accordingly)
Supply only Jumper Washer
Supply only Brass spindals
Supply only Caps
S & F 20 mm bore stop valves,cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for GI pipe or for GI unions and fixed completed all as specified.Make Prayag,or Equivalent in jaquar (essco)/ pearl precision.
S & F Stop Valve Concealed Type in repair 15 mm Cast Copper Alloy Capstain head, Chromium plated with long shank and cup, high pressure, screwed both ends for iron pipe or for unions and fixed complete. Make- Prayag or Equivalent in jaquar (essco)/ pearl precision.
Supply and fixing in repairs ball Cock PTMT 20 mm dia high pressure with alluminium rod epoxy coated and HD Ball and Brass flynut complete, screwed for iron pipe or for brass ferule fixed complete all as specified. Make Prayag or Equivalent in Pearl/ prabhat..
S & F in repairs centre hole basin mixer 15 mm dia, Brass Chromium plated complete all as specified Make- Prayag or Equivalent in jaquar (essco)/ pearl precision.
Supply and fixing in repairs 15 mm bore Pillar cocks chromium plated brass with capstain head screwed down high pressure complete Make- Prayag or Equivalent in jaquar (essco)/ pearl precision.
All as per serial item No 14 here-in-before but with Swan Neck 15 mm size complete all as specified. Make- Prayag or Equivalent in jaquar (essco)/ pearl precision.
S & F in repair CP shower rose with arm length 200mm & flange 15 mm bore pipe complete all as specified. Make- Prayag or Equivalent in jaquar (essco)/ pearl precision.
Supply and fixing in repair Waste coupling 40 mm , brass chromium plated for sinks with long screwed shanks and fly-nuts, flange end bedded with teflon tape and M-Seal complete all as specified.
Supply and fixing in repair Waste Coupling 32 mm , brass chromium plated for glazed ware sinks, basins etc. with long screwed shanks and fly-nuts, flange end bedded with teflon tape & M-Seal. complete all as specified and directed by the Engr-In-Charge.
S & F PVC Connections 15 mm size with PTMT nuts of length 600 mm complete all as specified. Make Prayag or Equivalent in Pearl/ prabhat.
S & F in repairs vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor and fixed complete all as specified. Make- CERA or Equivalent in kajaria bathware / jaquar.
S & F in repairs Vitreous China wash down water closet pan, white including PVC polymer water closet seat, black, closed pattern with flat bottom, cover and Stainless steel hinging device. Make- CERA or Equivalent in kajaria bathware / jaquar.
S & F in repair Vitreous China wash hand basin, white, flat back, size 550 x 400 mm including waste coupling and PVC waste pipe up to floor trap and fixed complete all as specified. Make- CERA or Equivalent in kajaria bathware / jaquar.
S & F in repair Beveled edge Looking Mirror 5 mm thick size 600 x 450 mm fixed on commercial ply wood 6 mm thick fixed to wooden plugs with chromium plated brass screws and 1" Spacers with cup washers and fixed all as specified.
S & F in repair Toilet Paper Holder PTMT and fixed complete all as specified.
S & F in repair 10 ltr capacity PVC low level flushing cistern, syphonic action type, white, with inlet, ball valve, float and handle including brackets and fixed all as specified. Make- CERA or Equivalent in kajaria bathware / jaquar.
All as per serial item No 25 here-in-before but dual flush type complete all as specified. Make- CERA or Equivalent in kajaria bathware / jaquar.
S & F in repair Flush Pipe of polyethylene/ PVC, 32 mm dia, for low level flushing cistern and fixed all as specified. Make- CERA/ Prayag/Pearl.
S & F in repairs plastic water closet seat cover, white, closed pattern with flat bottom, and cover and stainless steel hinging device and fixed complete all as specified.
S & F in repair PVC Waste Pipe 32 to 40 mm dia & length (expandable 1 mtr) for WHB/Sink up to floor trap and fixed complete all as specified.
S & F in repairs Stainless steel curtain / drapery rod fancy type 25 mm Bore and 1mm thickness with fixing brackets, end feneals etc. as approved by Engr-in-Charge
S & F in repairs Tublar towel rail 24" long , 20 mm dia, Brass Chromium plated complete all as specified
S & F in repairs PTMT towel rail 24" long, complete all as specified. Make 'Prayag' Cat Part No 200 or equivalent in pearl/ cera.
S & F in repairs mirror cabinet in PTMT Make Prayag and fixed complete all as specified
S & F in repairs PVC Jet spray with 1.50 m tube for wash down water closet (pedestal pattern) and fixed complete all as specified. Make 'Prayag' Cat No 522 or equivalent in pearl/ cera.
S & F in repairs Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with rails complete all as specified
S & F in repairs MS Butt Hinges medium weight, cold rolled mild steel 100 mm fixed to steel/wooden shutters complete all as specified
All as per serial item No 36 here-in-above but 50 mm long complete all as specified.
S & F in repair MS Rat tail pattern/ helical doors spring 150 to 200 mm, ordinary springs including roller and roller plate complete all as specified.
S & F in repair 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed all as specified.
Supply and fixing in repairs 200 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified.
All as per serial item No 40 here-in- before but 150 mm long complete all as specified.
S & F in repairs 125 mm long Aluminium handles, fabricated type, anodised and fixed complete all as specified
S&F in repair 150mm dia Floor door stopper of aluminum alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified.
Supply and fixing in repairs cast iron body hydraulic door closers universal type designation No 3 suitable for door shutters of 850 to 1000 mm wide. Make- Godrej
S & F in repair 100 mm long Hasp and Staple, safety type, aluminium anodised including bolt to hinge plate and fixed with screws and fixed complete all as specified.
S & F in repair Small fittings of 2nd Class Hardwood such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours; articles n exc 200 cu.m each and fixed complete all as specified.
M & L in repair Plain fillets 2nd Class hardwood not exc 3 sqcm, square, rectangular or triangular in section, chamfered or rounded on one edge or face, secured with nails and fixed complete all as specified.
Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads and fixed all as specified.
S & F 3 to 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square of any size pane and fixed complete all as specified.
All as per serial item No 49 here-in-before but frosted glass complete all as specified.
M & L for Securing old glass of any description in existing steel/wooden frames glazed with putty/beads including removing loose or decayed putty/beads, reputtying to match existing work etc. and fixed all as specified.
Taking down chowkats or frames with shutter exc 1.5 sqm and n.exc 4 sqm each (without taking off shutters from the frame and removing from the site complete all as specified.
All as per ser item No 52 here-in-above but n,exc 1.5 sqm each complete all as specified.
S & F in repair pressed steel door frame of size 125x60mm, double rebated for doors made out of 1.25mm thick mild steel sheet including necessary fixing lugs, hinges lock strike plate including filling of PCC 1:3:6 type C0 in frame etc, complete all as directed.
Supply and fixing factory made polyvinayl chloride(PVC) door frame size 100x50 ,, with a wall thickness of 5mm,made out of extruded 5mm pvc foam sheet,miter cut at two corners and joined with 2 nos of 150mm long brackets of 15mmx15mm MS Square tube.the two vertical door profiles are to be reinforced with 40mmx20mm MS Square tube of 19 gauges,EPDM rubber gasket weather seal to be provided through out of fram. the door frameshall be fixed to the wall using 65/100mm long MS Screw through the frame by using PVC fastener.A minimum of 04 Nos of screws to be provided for each vertical member & minimum 4 nos for horizontal member etc. complete all as specified and directed by the Engr-In-Charge.Make:- GIZA ,Rajshree,Ecocell
Supply and fixing factory made polyvinayl chloride(PVC) door frame size 50x47 ,, with a wall thickness of 5mm,made out of extruded 5mm pvc sheet,miter cut at two corners and joined with 2 nos of 150mm long brackets of 15mmx15mm MS Square tube.the two vertical door profiles are to be reinforced with 19mmx19mm MS Square tube of 19 gauges,EPDM rubber gasket weather seal to be provided through out of fram. the door frameshall be fixed to the wall using 65/100mm long MS Screw through the frame by using PVC fastener.A minimum of 04 Nos of screws to be provided for each vertical member & minimum 2 nos for horizontal member etc. complete all as specified and directed by the Engr-In-Charge.
Supply and fixing Factory made solid panel PVC cupboard/cupboard shutter/door shutter 20 to 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frames shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet, strip of 20mm width stuck inside with solvent cement for stiles and plain. colour PVC sheet for top rail and bottom rail on either side and as gap in sorts of top rail and bottom rail padding of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the format site as per specification and drawing.Make Navratan specialty chemicals LLP GIZA Brand/Rajshree/Ecocell
Supply and fixing 30mm thick factory made solid panel PVC door shutterconsisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles & 15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat molded “GIZA” PVC ‘C’ channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide PVC Sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert For top rail & bottom rail. Paneling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails With 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An Additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent cement Adhesive. Complete as per direction of Engineer-incharge, manufacturer’s specification & drawing. Make - GIZA ,Rajshree,Ecocell
Supply and fixing 32mm Thick Factory made PVC Flush door shutter consisting of panel of Hollow PVC Profile of 20 mm thickness, consisting of frame made out of M.S.tubes of 19 guage thickness and size of 19 mm x 19 mm inserted inside the hollow section of stiles, top and bottom rails and two 19mm x 19mm inserted horizontally inside the hollow profile section at an equal distance from top and bottom of door and fixed with hollow profile section using 5mm thick PVC sheet using screws. Hollow PVC profile shall be lipped with 10mm (5mm x 2) thick x 20 mm width on stiles and rails using solvent cement. The inner panel shall be laminated with 5 mm thick termite proof, water proof and fire retardant PVC sheet using solvent cement on both side of the panel etc. complete as per direction of Engineer – in- charge, manufactacturer’s specification and drawing. Make - GIZ” ,Rajshree,Ecocell
S&F factory made, 35 mm thick plain framed panelled shutter (two panel) of second class hard wood rail and style with lock rail and panel of 9 mm BWP commercial ply. The size of rail and style as per IS : 1003 Part I, klin seasoned and chemically pressure treated, all as specified and directed.
S & F 35mm thick second class hardwood glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing tiles and rubbish off the premises complete all as specified and directed.
M&L non-skid / mat finish designed coloured joint free ceramic tiles of size not less than 400 mm x 400 mm x 6- 7 mm thick in floor, set and jointed in tile adhesive/cement mortar and pointed in coloured grout to match over and including 15 mm thick screed in cement mortar 1:6 complete all as specified.Make: kajaria,RAK, Jhonson, Riwasa, Somany, Marbito
M&L for coloured Glazed ceramic tiles in vertical surfaces of size 300mm x600mm x 7mm/ 450x 350 x 7mm thick over and including 10 mm thick bedding layer in CM 1:4 , set and jointed in tile adhesive/cement mortar and pointed in coloured grout to match complete all as directed. Make: kajaria,RAK, Jhonson, Riwasa, Somany, Marbito
Demolition of Stone slabs and tiles laid, bedded in any mortar of any description or thickness in floors, aprons etc. and removing unserviceable stone & rubish of the premises of MOD land.
S&F granite 15-18mm thick of Zed Black/Telephonic Black ( table rubbed and polished in steps, jambs pillars, window cill, cooking platform and like with approved adhesive incl pointing in coloured grout complete all as specified and directed.
S & F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete. Make Navratan specialty chemicals LLP GIZA Brand/Rajshree/Ecocell
Taking down cement plastering of any description on brick/stone/concrete wall surfaces of any description incl racking out joints hacking for key,scrubbing down with water etc. complete all as specified and as directed and removing unserviceable stone & rubish of the premises of MOD land.
M&L for rendering 12 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished surfaces even and smooth complete all as specified and as directed by Engr-in-Charge.
M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 finished surfaces even and smooth complete all as specified and as directed by Engr-in-Charge.
M&L for two coats of distemper oil emulsion 1-1.5 mm thick wall care putty finish wall surface even & smooth by roller on new plastered surface of wall etc complete all as specified and directed.
S & F in repairs Health faucet with 1.50 m tube and two way CP Bib cock for wash down water closet (pedestal pattern) and fixed complete all as specified
Demolition of brick work or stone/boulder masonry built in CM on cement lime mortor and removing rubbbish of out side MoD land complete all as specified
M&L brick work with sub class ‘B’ brick (old size) straight or curved on plan exc 6m mean radis built in CM 1:6 complete all as specified.
M&L for chequered cement concrete tiles glossy finish coloured 20 to 22 mm thick of any size and pattern as approved by GE as in patches in floor set & jointed in neat cement slurry and pointed in coloured cement to match the tiles over and including 15 mm screed bed in CM 1:6 complete all as specified.
Taking down shutters of any description n. exc 1 sq. m and refixing in same opening after easing, adjusting and replacement of minor nails etc complete all as specified.
All as per item ser No 76 here-in-before but exc 1 sq. m and n. exc 2 sq. m each complete all as specified.
M&L for resecuring or easing & adjusting, without taking down shutter of any description n. exc 1 sq. m each complete all as specified.
All as per item ser No 78 here-in-before but exc 1 sq. m and n. exc 2 sq. m each complete all as specified.
Supply and fixing in repairs Ply Wood 4 mm thickness, grade BWR, type BB fixed with screws/nails to timber framework in any position pasted with glue/ fevicol adhessive etc., complete all as specified.
Supply and fixing in repairs Ply Wood 6mm thickness, grade BWR, type BB fixed with screws/nails to timber framework in any position pasted with glue/ fevicol adhessive etc., complete all as specified.
S & F in repairs 19 mm thick block board grade-2 quality interior grade, commercial type for cupboard, almirah and shelves etc. complete all as specified.
Supply and fixing in repairs 19 mm thick MDF Board interior grade pre-laminated on one side and other side balancing white lamination in any position such as cup boards, drawers, shutters etcc., fixed with screws to timber frame work complete all as specified.
All as per serial item No 83 here-in-before but laminated on both sides complete all as specified.
Repair to steel Door, Window and Ventilators by spot or running welding including repair of MS Butt Hinges any size to steel chowkets by bringing welding plant at site complete all as specified.
Taking up or down 15 mm Bore steel tubing and connections, including cleaning and removing from site complete all as specified.
Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
M&L for refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) for 15 mm dia pipes with and including all new fittings complete all as specified and directed. Note:- GI pipe shall be reused, received under Item No. 86.
Taking up or down 20 mm Bore steel tubing and connections, including cleaning and removing from site completed all as specified.
Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
M&L for refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) for 20 mm dia pipes with and including all new fittings complete all as specified and directed. Note:- GI pipe shall be reused, received under Item No. 89.
M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exceeding 10 cm girth as in brick wall complete all as specified and directed.
Supply and fixing in repairs PTMT Ball valves 20 mm bore, high pressure with epoxy coated Aluminium rods & high density plastic ball screwed and fixed complete all as specified. Make Prayag or Equivalent in Pearl/ prabhat.
All as per serial No 93 here-in-before but 15 mm size complete all as specified.
S&F in repair PVC Knob/Handle (as per sample) for 10 ltr capacity PVC low level flushing cistern complete all as directed.
S&F in repair PVC Syphon (as per sample) for 10 ltr capacity PVC low level flushing cistern complete all as directed.
S&F in repair complete Veta Washer set (as per sample) for 10 ltr capacity PVC low level flushing cistern complete all as directed.
S&F in repair low level flushing cistern any capacity after carrying out minor repairs such as stopping of leakage etc. complete all as directed.
Cleaning and removing all scale and dirt, etc. from over head water tanks and from mouths of circulating pipes of capacity exc 250 ltr but not exc 500 ltr vacumation, dewatering, desludging, rubbing internal surfaces with soft sponge & medium hard sponge to remove coglation with vinegar solution or light acid, drawing the tank by wet vaccume cleaner, disinfecting the internal surfaces with Kmnou solution & drying it again with vaccume cleaner and marking the outer surface of overhead tank with synthetic enamel paint using stancils (Date of cleaning month & Year)
All as per serial item No 99 here-in-before but capacity of water tanks exc 500 ltr and not exc 1000 ltr capacity.
S&F in repair water tank covers of PVC suitable for 300/500/1000 Ltr tanks complete all as specified & directed.
S&F in repair rotational moulded polyethylene water storage tanks 500 lts capacity (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I and as directed
S&F in repair rotational moulded polyethylene water storage tanks 1000 lts capacity (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I and as directed
S&F in repairs PTMT/ CP bottle trap 32 mm size for WHB complete all as specified and as directed (As per sample)
S&F PTMT grating 125 mm dia with or without waste hole fixed in repairs complete all as specified and as directed.
S&F PTMT grating 100 mm dia with or without waste hole fixed in repairs complete all as specified and as directed.
M&L for preparation of new or previously untreated wooden surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Supply and fixing in repairs CI lid for inspection hole of CI bend, traps Y junction T junction, etc fixed with nut and bolt, fixed as in repair including removing old nuts by drilling or welding complete all as specified and directed.
Supply and fixing in repairs cast Iron bends 100mm dia bore ( any radius), diminishing pieces or tapers (larger bore measured) in cement joints complete all as specified and directed.
Supply and fixing in repairs MS powder coated peg set of three complete all as specified.
S&F double action spring hinge 100mm long mild steel with steel wire spring stove enameled black all as directed.
S&F 300mm long M.S ordinary Helical door spring incl roller and roller plate all as specified.
Demolition of Cement concrete of any description and in any position not otherwise specially provided for Sunken floor etc complete all as specified and directed
M&L for 40mm thick PCC (1:2:4) type B1 (using 20mm grade aggregate) as in flooring finishing the surfaces even & smooth without using extra cement complete all as specified.
S&F Cast iron soil, waste and vent pipe, 100mm bore, sand cast in any length, with or without ears, with cement joints, fixed to walls with and including stack clamps, nuts , bolts etc. and making necessary connections complete all as specified after taking down of existing unserviceable pipe fixed in repair
S&F Cast iron soil, waste and vent pipe, 75mm bore, sand cast in any length, with or without ears, with lead joints, fixed to walls with and including stack clamps, nuts , bolts etc. and making necessary connections, fixed as in repair complete all as specified.
Attending complaints like leakge of taps, angle valve stop coks or in pipes, fitting and removing of plumbing fittings such as Bib taps , pilllar taps, GI tubing , stop cocks, angle vales, float valves water tanks, gratinsgs, traps , WCs flushing cistern, waste pipes, WHBs, EWCs and similar work for continuity of essential internal water supply/sanitary services by employing an experienced team of plumbers and helpers to restore the exiting/services to the satisfaction of Engineer-in-Charge. Note :- (i) T&P including convence to reach door to door for attending the jobs will be provided by the contractor. (ii) Material will provided by seggregation of complaints (72 Hours/3 days/15 days/30 days) to the contractor and will be seperatly measured & paid as per item below. (iii) The complaint slip will be collected from complaint cell incharge/JE(Civ) by the contractor or high authority rep in writing. (iv) The area/Location of of Job will be all MD and OTM accn in AOR of AGE B/R-II. (v) If any complaint not attended by contractor with in 24 hours he will be liable for penalty/recovery of Rs.150 per complaint.Amount will be deducted from running payments/Final bill.
Attending complaints related to carpenter work and obtaining completion from user including repair/easing of doors re-fixing or tightening of doors, windows, resecuring of door/window wire guage, (fixing only) builders hardwares, helical door spring including use of all types of nails, screws etc which are required to make good the work, use of any other stores/fittings shall be paid seprately under Supply only items in building to continuity of essential carpentry service by employing a team of experienced carpenters with a helpers to restore the existing service to the satisfaction of Engineer-in-Charge. All as directed T&P for attending the job will be provided by the contractor. Note :- (i) T&P including convence to reach door to door for attending the jobs will be provided by the contractor. (ii) The complaint slip will be collected from complaint cell incharge/JE(Civ) by the contractor supervisor. (iii) The area/Location of of Job will be all MD and OTM accn in AOR of AGE B/R-II. (iv) If any complaint not attended by contractor with in 48 hours he will be liable for penalty/recovery of Rs.150 per complaint.Amount will be deducted from running payments/Final bill.
Attending complaints related to black smith work and obtaining completion from user for resecuring/easing/minor repair to make functional of steel doors, steel windows, steel rolling shutter and gates etc by greasing,oiling & cleaning and changing of required fittings, fixtures & compnents etc by employing experienced Black smith with a helper to restore the existing service to the satisfaction of Engineer-in-Charge by using store issued by the Dept..All as directed T&P for attending the job will be provided by the contractor. Note :- (i) T&P including convence to reach door to door for attending the jobs will be provided by the contractor. (ii) Material will provided by department through maintanace cell and neccessary salvage/unused material deposit back to complaint cell incharge/JE(Civ). (iii) The complaint slip will be collected from complaint cell incharge/JE(Civ) by the contractor supervisor. (iv) The area/Location of of Job will be all MD and OTM accn in AOR of AGE B/R-II. (V) Scan Copy of EPF,ESIC will be provided by the contractor at the time of bid submission other wise bid will be rejected in technical bid. (VI) If any complaint not attended by contractor with in 24 hours he will be liable for penalty/recovery of Rs.150 per complaint.Amount will be deducted from running payments/Final bill.
Attending complaints related to Cleaning of blocked WC seat of pedestal/squatt pattern upto Ist manhole and making the drain pipe of any size full fuctional by flushing with water to entire satisfaction of engr-in charge including cleaning of 1st manhole and removing the waste material/sludge etc to a distance n. exec 300m and burning the same in pits complete all as specified and directed by Engr-in -charge. T&P for attending the job will be provided by the contractor. Note :- (i) T&P including convence to reach door to door for attending the jobs will be provided by the contractor. (ii) Material will provided by department through maintanace cell and neccessary salvage/unused material deposit back to complaint cell incharge/JE(Civ). (iii) The complaint slip will be collected from complaint cell incharge/JE(Civ) by the contractor supervisor. (iv) The area/Location of of Job will be all MD and OTM accn in AOR of AGE B/R-II. (V) Scan Copy of EPF,ESIC will be provided by the contractor at the time of bid submission other wise bid will be rejected in technical bid. (VI) If any complaint not attended by contractor with in 24 hours he will be liable for penalty/recovery of Rs.100 per complaint.Amount will be deducted from running payments/Final bill.
Attending complaints related to Cleaning of blocked floor trap of bath room &kitchen etc upto 1st manhole including cleaning of gully/trap and removing the waste material/sludge etc ta a distance n. exec 300m and burring the same in pits complete all as specified and directed by Engr-in -charge. T&P for attending the job will be provided by the contractor. Note :- (i) T&P including convence to reach door to door for attending the jobs will be provided by the contractor. (ii) Material will provided by department through maintanace cell and neccessary salvage/unused material deposit back to complaint cell incharge/JE(Civ). (iii) The complaint slip will be collected from complaint cell incharge/JE(Civ) by the contractor supervisor. (iv) The area/Location of of Job will be all MD and OTM accn in AOR of AGE B/R-II. (V) Scan Copy of EPF,ESIC will be provided by the contractor at the time of bid submission other wise bid will be rejected in technical bid. (VI) If any complaint not attended by contractor with in 24 hours he will be liable for penalty/recovery of Rs.100 per complaint.Amount will be deducted from running payments/Final bill.
Dewatering of septic tank/soakage well of any depth by pump or by manual after plugging of incoming sewage lines and throwing water into non residential area or in drain/nallah complete all as specified and directed by Engineer-in-Charge.
Cleaning of septic tanks, soakage well of any depth including inlet and outlet chamber and removing sludge, silt, residue both organic and in-organic nature including any other type of waste material after plugging of incoming sewage line and removing waste material/sludge etc to a distance n.exc 300m and burrying in a pit complete all as specified and directed by Engineer-in-Charge.
Supply only Jumper brass with rubber or leather washer complete for 15 mm dia bib cock / stop cock brass all as specified.
Supply only spindle brass for 15 mm dia CP Bib cock/ pillar cock/ concealed cock of any pattern.
Supply only Capastain head / cap of CP bib tap / CP stop cock 15 mm size complete all as directed by Engr- in-charge.
Supply only Jumper brass with rubber or leather washer complete for 20 mm dia stop cock brass all as specified.
supply only white cement in 1 kg pack :-Birla white or as approved)
supply only Plain sheet glass 3 mm thick of size 90X90 cms
Supply only oil glass putty for glazing
Supply only PVC urinal waste pipe 40 mm
Supply only PVC waste pipe 32 mm
Supply only PVC washer for bib tap 15 mm
Supply only Rain water pipes PVC 110 mm bore
Supply only Rain water pipes PVC 75 mm bore
Supply only Clamps for rain water pipes
Supply only PVC grating 150mm
Supply only WPC Board 18mm thick,Make Navratan specialty chemicals LLP GIZA Brand/Rajshree/Ecocell
Supply only WPC Board 6mm thick,Make Navratan specialty chemicals LLP GIZA Brand/Rajshree/Ecocell
Supply only WPC Board 30mm thick,Make Navratan specialty chemicals LLP GIZA Brand/Rajshree/Ecocell
Supply only wood ply 6mm thick
Supply only wood ply 10mm thick
Supply only wood ply 12mm thick
Supply only wood ply 18mm thick
Supply Only Mortice lock 75mm
Supply Only Mortice lock 100mm
Supply Only PVC Connection 600mm
Supply Only Door seal 1000mm Note- Materials taken as " supply only" in the BOQ shall be supplied and deposited to MES store yard of Engineer-in-charge and taken on ledger charge by him and shall be issued on proper issue voucher solely for the purpose of repair/ maintenance under this contract only.
Meher enterprises
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .