Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.1 LAccepted-AOC | L1 | Accepted-AOC Accepted due to lowest rates bidder L1 | |
| 2 | L2₹13.5 L+₹1.2 L (9.77%)Rejected-Finance | L2 | Rejected-Finance Rejected due to higher rates bidder L2 |
Tender Value
₹8.4 L
EMD Value
₹16,800
Closing Date
7 Oct 2021, 5:00 pmClosed
Executive Engineer
Executive Engineer HP.PWD Division Jaisinghpur
Providing and laying 30 mm thick Bitumen concrete laying with paver finisher Km 0/000 to 1/000)(Approved financial Incentive 2021-22 PMGSY road) (Under Jaisinghpur Sub Division)
2021_PWD_52794_1
Periodic Maintenance of Tamber to Manjoti
Open Tender
Civil Works - Roads
Item Rate
60 days
Jaisinghpur
Please refer Tender documents.
15 documents required · 15 mandatory
₹350
₹16,800
22 Apr 2022
30 Sept 2021
8 Oct 2021
30 Sept 2021
7 Oct 2021
30 Sept 2021
Amount
Providing and applying tack coat with Bitumen emulsion (RS-I) using emulsion pressure distributor at the rate 0.225 kg (zero point two two five kilograme) per/ Square metre on the prepared Bituminous surface cleaned with hydraulic broom as per M.O.R.D. technical specifications section No. 503 or as per the entire satisfaction and direction of Engineer - in- Charge including carriage of materials within all leads, lifts and other incidentals. The rate including of octroi, royality, GST, Malkana, toll tax, or other taxes imposed by the Government.
Providing, laying and rolling of built-up spray grout over prepared base consisting of single Layer composite construction of crushed coarse aggregates using motor grader for aggregates, key stone chips spreader may be used with application of bituminous binder after each layer, and with key aggregates placed on top of the layer to serve as a base, conforming to the line, grade and cross-section specified, the compacted layer thickness being 75 mm (seventy five millimetre) as per technical spacification clause 505 by manual mean bitumen-VG-10 (VG ten) including carriage of materials within all leads , lifts and other incidentals or as per the directiones of Engineer-In-Charge. The rate including of octroi, royality, GST, Malkana, toll tax, or other taxes imposed by the Government.
Providing laying spreading and compacting by mechanical means 75 mm (seventy five millimetre) compacted thickness broken /crushed of stone aggregate of size 63mm to 45mm (sixty three millimetre to forty five millimetre) Grading-II to water bound Macadam specification including spreading in uniform thickness using template, hand packing, rolling with three wheel 80-100 (eighty to hundred ) K.N. static roller in stages to proper grade and camber including applying and brooming, stone screening type-B of size 11.2mm (eleven decimal two millimetre) nominal size at the rate of 0.20 cum (zero point two zero cubic metre) per ten square metre and binding material at the rate of 0.06 (zero decimal zero six) cubic metre per ten square metre to fill up the interstices of coarse aggregate, watering and compacting to the required density as per drawing and M.O.R.D. technical specifications section 405 and as per the directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals and to the entire satisfaction of the Engineer-in-Charge .The rate is including octroi, royality, GST, toll tax or other taxes imposed by the government.
Providing and applying primer coat with BITUMEN emulsion (SS-1) on the prepared surface of granular base including cleaning of road surface with hydraulic brooms and spraying primer @ 0.85 Kg. per Sqm. ( zero point eight five kilogram) per square metre using mechanical means as per M.O.R.D. technical specifications clause 502and as per the directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals and to the entire satisfaction of the Engineer-in-Charge .The rate is including octroi, royality, GST, toll tax, or other taxes imposed by the government.
Providing and laying 30mm thick (Thirty millimetre) bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.50%(five point fifty) per cent by weight of total of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects or as per the direction by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate including of octroi, royality, GST, Malkana, toll tax, or other taxes imposed by the Government.
G.P.ACHARYA
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .