Construction of New Anganwadi at Gaviyar Village in South West (Athwa) Zone. 2nd Attempt

NAME OF WORK : Construction of New Anganwadi At Gaviyar Village in South

West (Athwa) Zone.

TENDER NOTICE NO. : Dy.Commissioner/S.W.(Athwa) Zone/No.22/

DESCRIPTION QUANTITY UNIT RATE AMOUNT

WORK UP TO PLINTH LEVEL

Excavation for foundation includ.sorting out &

stacking of useful materials & disposing of the

1 excavated stuff upto 50 mt. Lead & all lift,

watering etc.Comp.

(A) Loose or Soft soil Executed With Mechanised Efforts /

Boring holes 3.5 mt.deep in ordinary soil ( for

cast in situ piles) & disposal ofthe surplus

excavated soil as directed within a lead of

M. For following diameter of piles.

250mm dia 8.40 Rmt 326.84

Providing and filling rubbles including hand

packing and filling interstices with quarry

spalls behind abutments and between returns

Providing & laying C.C 1:3:6 (1cement :3

coarse sand :6 Crushed stone agg 20m.m

Nominal size)&curing comp. excl. cost of form

work in :(a) foundation & Plinth

(A) Foundation 5.60 C.M. 3005.76

(C) Grade Slab 7.20 C.M. 3005.76

Providing & laying cement concrete 1:2:4 (1

cement:2 sand:4 graded stone agg. 20 mm

nominal size)& curing comp. Includ.cost of

5 form work but exclu. Cost of reinforcement for

reinforced concrete work in : (A) Foundation,

footing, Base of columns and Mass concrete

(C) Grade slab 9.90 C.M. 3637.34

Providing, mixing, placing, compacting by

machine vibrator, curing, testing M20 Design

mix concrete as per IS 456:2000 (latest

6 revision) and as per tender specification in all

items including cost of form work and

rendering but excluding cost of reinforcement

DESCRIPTION QUANTITY UNIT RATE AMOUNT

(A) foundation, footing, base of columns and

mass concrete 7.60 C.M. 3918.70

SMC SOR, PAGE NO 14 DESIGN MIX M20

Providing, mixing, placing, compacting by

machine vibrator, curing, testing M20 Design

mix concrete as per IS 456:2000 (latest

7 revision) and as per tender specification in all

items including cost of form work and

rendering but excluding cost of reinforcement

(1) Having cross sectional area up to

(2) Having cross sectional area more than

0.085 sq. mt .up to 0.12 sqmt.

(3) Having cross sectional area more than

SMC SOR, PAGE NO 14 DESIGN MIX M20

(1) Having cross sectional area upto

(2) Having cros sectional area more than

sq. mt and upto 0.12 sq.mt.

(3) Having cross sectional area more than

SMC SOR, PAGE NO 14 DESIGN MIX M20

Providing & fixing IS Mark TMT Bar FE 500D

8 reinforcement for R.C.C. work incl. bending,

binding & placing in position etc.comp.---

Upto G.L./P.L. 3441.00 Kg. 76.21

SMC SOR, PAGE NO 1 IT NO

Brick work using common burnt clay building

bricks having crushing strength not less than

kg./Sq.Cm. in Cement Mortar 1:6 (1- Cement : 6 -

fine sand) (C) Fly Ash Bricks

SMC SOR, PAGE NO 2 IT NO 16 10.40 C.M. 4511.97

Filling available excavated earth (excluding rock)

in trenches. plinth, sides of foundations etc. in

10 layers not exceeding 20 cm. in depth consolidating

each disposited layer by ramming and watering.

SMC SOR, PAGE NO 1 IT NO 10 205.30 C.M. 130.39

Filling in foundation and plinth with murrum or

selected soil in layers of 20cm. thickness including

watering, ramming and consolidating etc.

Carring out plinth treatment to post construction /

existing structure by spraying chemical solution for

termite control treatment including labour and material

consistment with ISI specification. Using Chlordene and

Chiorpurfiles 20 EC. As per 6131_paret-II Consentration

12 Weight one percent is recommended i.e. one litre 20 EC 96.00 S.M. 82.89

chemical emulsion with 19 liter give 1% concrentration

inclusive of one litre chemical emulsion appication at

the rate of 5 litre chemical / Sqm of surface is

recommended as per IS.

SMC SOR, PAGE NO 12 IT NO

DESCRIPTION QUANTITY UNIT RATE AMOUNT

Providing & Applying 20mm. Th. Heavy Roller plaster on

walls or similar surfaces at all floor levels consisting of

12 mm av. Th. Backing coat of C.M. 1:3 (1 cement:3

sand) & 8 mm. th. Finishing coat of C.M. 1:1 (1 cement:

13 1 sand) apply thick cement slurry and apply roller

horizontal as well as vartical ( two times ) up to good

quality and size of grain in elevation as per directed by

engineer incharge.

SMC SOR, PAGE NO 3 IT NO 28 MR 18.10 S.M 324.00

Providing & applying two coats of weather shield max

paint (3 coats may be required in case of darker

colours.) of ICI Dulux or Apex Ultima of Asian Paint

including applying exterior acrylic primer coat as per

manufacturers specification and directions in shade and

colour approved by architects, on exterior surfaces of

the building including scaffolding, preparing the surface,

watering, curing etc. complete and as directed by the

architects and manufacturers. Surface Preparation :

surface is thoroughly clean, dry and free from all loose

14 dirt, chalk, grease, fungi, algae and flaking paint. This

can be achieved by brushing with a wire/ stiff coir brush,

followed by water jetting if required. Fill up all minor

cracks and defects with white cement and sand mixture

in the ratio 1:3. For application on previously painted

wall, previous coatings of paint must be thoroughly

scraped off and Clean the surface thoroughly using wire

brushes. Priming: Apply a liberal coat of exterior acrylic

primer and allow it to dry for 4-5 hours. Application of

putty is not recommended. Minimum 4-6 hours

duration is required between each coat of weather

shield max paint

TOTAL COST UP TO PLINTH

WORK ABOVE PLINTH

Providing, mixing, placing, compacting by

machine vibrator, curing, testing M20 Design

mix concrete as per IS 456:2000 (latest

15 revision) and as per tender specification in all

items including cost of form work and

rendering but excluding cost of reinforcement

(1) Having cross sectional area up to

Ground Floor 0.00 C.M. 12550.27

First Floor 0.00 C.M. 12589.87

Terrace Floor 0.00 C.M. 12629.47

(2) Having cross sectional area more than 0.085 sq. mt .up to

Ground Floor 0.00 C.M. 11099.15

Terrace Floor 0.00 C.M. 11138.75

At Staircabin Top 0.00 C.M. 11178.35

(3) Having cross sectional area more than

Ground Floor 4.80 C.M. 9153.32

Terrace Floor 1.80 C.M. 9192.92

At Staircabin Top 0.00 C.M. 9232.52

(SOR SMC Pg No. 14 Design Mix M20)

(1) Having cross sectional area upto

Ground Floor 0.20 C.M. 8957.39

Terrace Floor 0.00 C.M. 8996.99

DESCRIPTION QUANTITY UNIT RATE AMOUNT

(2) Having cros sectional area more than 0.08 sq. mt and upto

Ground Floor 0.40 C.M. 8038.38

Terrace Floor 0.00 C.M. 8077.98

(3) Having cross sectional area more than 0.12 sq.mt.

Ground Floor 7.30 C.M. 6961.62

Terrace Floor 0.00 C.M. 7001.22

(SOR SMC Pg No. 14 Design Mix M20)

(2) Slabs having more than 8 Cm & upto 10 Cm thickness.

Ground Floor 0.00 C.M. 7850.27

Terrace Floor 0.00 C.M. 7889.87

(3) Slabs having more than 10 Cm & upto 13 Cm thickness.

Ground Floor 0.00 C.M. 7268.63

Terrace Floor 0.00 C.M. 7308.23

(4) Having more than 13 cm. Thickness

Ground Floor 12.10 C.M. 6690.46

Terrace Floor 0.00 C.M. 6730.06

(SOR SMC Pg No. 14 Design Mix M20)

Ground Floor 0.70 C.M. 9381.78

Terrace Floor 0.00 C.M. 9421.38

(SOR SMC Pg No. 14 Design Mix M20)

Ground Floor 0.30 C.M. 6875.78

Terrace Floor 0.00 C.M. 6915.38

(SOR SMC Pg No. 14 Design Mix M20)

Providing & laying C.C 1:3:6 (1cement :3

coarse sand :6 crushed stone agg. 20 m.m

Nominal size)& curing comp. incl. cost of from

work in: wall caps/ copings.

(SOR SMC Pg No. 9 It No. 97) 1.80 C.M. 3982.62

Providing, mixing, placing, compacting by

machine vibrator, curing, testing M20 Design

mix concrete as per IS 456:2000 (latest

17 revision) and as per tender specification in all

items including cost of form work and

rendering but excluding cost of reinforcement

(F) Stair cases including landing etc.

Ground Floor 0.00 C.M. 7062.46

First Floor 0.00 C.M. 7102.06

(G) Vertical and horizontal fins

Ground Floor 0.00 C.M. 9275.80

Terrace Floor 0.00 C.M. 9315.40

(SOR SMC Pg No. 14 Design Mix M20)

Providing & fixing IS Mark TMT Bar FE 500D

reinforcement for R.C.C. work incl. bending,

binding & placing in position etc.comp.---

Ground Floor 3351.00 Kg 76.21

Terrace Floor 481.00 Kg 77.21

Stair Cabin Top 0.00 Kg 78.21

(SOR SMC Pg No. 2 It No. 15)

DESCRIPTION QUANTITY UNIT RATE AMOUNT

Brick work using common burnt clay building

bricks having crushing strength not less than

19 35 kg./Sq.Cm. in Cement Mortar 1:6 (1-

Cement : 6 -fine sand) (C) Fly Ash Bricks

Ground Floor 28.50 C.M. 4511.97

Terrace Floor 10.20 C.M. 4786.95

(SOR SMC Pg No. 2 It No. 16)

Half brick masonry in common brunt clay

building bricks having crushing strength not

20 less than 35 Kg/Sq.Cm. in Cement mortar 1:4

(1- Cement : 4 - coarse sand ) in foundation

and plinth (C)Fly Ash Bricks

Ground Floor 68.10 S.M. 678.86

Terrace Floor 0.00 S.M. 631.79

(SOR SMC Pg No. 2 It No. 17)

Providing & Applying 15mm.th.cement plaster

in single coat on brick/ concrete walls similar

surfaces for plastering & finished even &

smooth with a floating coat of cement slurry

21 mixed with admixture of lime or neeru in

required proportion etc. comp. in C.M 1:3 (1

cement : 3sand) (A) For wall and similar

Ground Floor 296.40 S.M 237.51

Terrace Floor 48.20 S.M 265.65

(SOR SMC Pg No. 3 It No. 25)

Providing & Applying 10mm.th.cement plaster

in single coat on brick/ concrete walls similar

surfaces for plastering & finished even &

smooth with a floating coat of cement slurry

22 mixed with admixture of lime or neeru in

required proportion etc. comp. in C.M 1:3 (1

cement : 3sand) (A) For wall and similar

(B) for ceilings and soffits of stairs

Ground Floor 81.10 S.M 214.60

Terrace Floor 0.00 S.M 242.74

(SOR SMC Pg No. 3 It No. 24)

Providing and fixing 150 mm wide, approved

quality chicken wire mesh (FRP / PVC)at

junction of brick work and RCC work or two

dissimilar surfaces, at all heights fixed by nails,

rowal plugs or tag by cement mortar 1:3

before applying the plaster, including curing,

scaffolding all complete as directed.

Ground floor 18.90 S.M. 102.00

Terrace Floor 2.50 S.M. 102.00

(SOR SMC Pg No. 11 It No. 124) MR

DESCRIPTION QUANTITY UNIT RATE AMOUNT

Providing & Applying 20mm. Th. Heavy Roller

plaster on walls or similar surfaces at all floor

levels consisting of 12 mm av. Th. Backing

coat of C.M. 1:3 (1 cement:3 sand) & 8 mm.

24 th. Finishing coat of C.M. 1:1 (1 cement:

sand) apply thick cement slurry and apply

roller horizontal as well as vartical ( two times

) up to good quality and size of grain in

elevation as per directed by engineer incharge.

Ground Floor 135.60 S.M 324.00

Terrace Floor 114.70 S.M 324.00

(SOR SMC Pg No. 3 It No. 28) MR

Providing throating or plaster drip and

25 moulding it to R.C.C. chajja etc. comp.. For all

Ground Floor 17.30 R.M 41.66

(SOR SMC Pg No. 3 It No. 29)

Providing 20 mm deep finished groove in

26 plaster in line and level etc. Comp. For all Floor

Ground Floor 18.00 R.M 50.00

Terrace Floor 0.00 R.M 50.00

(SOR SMC Pg No. 3 It No. 30) MR

Providing and laying Vitrified tiles 8 to 10 mm

thick, 24" x 24" in flooring treads of steps and

landing laid on a bed of 12mm thick cement

mortar 1:3 (1 cement : 3 coarse sand) finishing

with flush pointing in white cement.

Ground Floor 0.00 S.M 1040.35

Terrace Floor 0.00 S.M 1040.35

(SOR SMC Pg No. 4 It No. 44)

Providing and laying Vitrified tiles 8 to 10 mm

thick, 24" x 24" in skrting risers of steps and

28 dedo on 10mm thick cement plaster 1:3 (1

cement : 3 coarse sand) and jointed with white

Ground Floor 73.80 S.M 1081.71

Terrace Floor 0.00 S.M 1081.71

(SOR SMC Pg No.4 It No. 45)

Providing & laying Vitrified tiles of 8mm thick

of Orient, Kajaria, Jhonson, Nitco, Somani,

Bell, Asian or Euro make in flooring,treads of

steps & Landing laid on bed of 20 mm

(Average) base of cement mortar 1:6 (1

Cement : 6 Coarse sand) on new surface or

29 fixing on existing flooring by adhesive material

including dismentaling of existing flooring and

jointed with colour cement slurry including

finished with flush pointing & cleaning the

surface etc. comp.Size 24" x 24" For Antiskid

Ground Floor 15.50 S.M 1397.83

Terrace Floor 0.00 S.M 1397.83

(SOR SMC Pg No.4 It No. 43)

DESCRIPTION QUANTITY UNIT RATE AMOUNT

Providing and laying polished Kota stone slab

flooring over 20mm (Average) thick base of

cement mortar 1:6 (1-cement : 6-coarse sand)

or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand)

laid over and jointed with grey cement slurry

mixed with pigment to match the shade of

slab including rubbing and polishing etc. Floor

Ground 69.70 S.M 989.45

(SOR SMC Pg No.4 It No. 32)

Providing and laying polished kota stone slab

25mm thick in risers of steps,skirting Dedo

and pillars laid on 10mm thick cement mortar

1:3 (1- Cement : 3 coarse sand) and jointed

with gray cement slury mixed with pigment to

match the shade of slab including rubbing and

polishing etc. complete.

Ground Floor 8.50 S.M 1076.94

Terrace Floor 0.00 S.M 1076.94

(SOR SMC Pg No.4 It No. 33)

Providing and constructing sandwitch type

Granite stone cooking platform 0.6 mt. wide

& 0.75 mt. height, including one end side

granite stone (Double Polish) of 1.25 mt.

height & front granite stone patti of 10 cm

wide, vertical partitions of half B.M. wall in

C.M. 1:4 and 10mm th. plaster in 1:3 with

32 finishing smooth with cement slurry as

required and Stainless Steel sink of 0.45 mt x

0.45 mt size of approved quality and make

with required all fitings & fixitures etc. comp

as per instruction given by site in charge at all

floors. (Basic rate of Granite Rs.1,200.00 /

Ground Floor 6.30 R.M. 3128.00

Terrace Floor 0.00 R.M. 3128.00

(SOR SMC,Pg No.11, It No. 123) MR

Providing and filling in depressions of Bath and

W.C. At all floor levels, after completing

33 plumbing work of pans, pipes,traps etc.with

cinder or fly ash as directed by Engineer in

charge etc. comp..

All Floor 3.90 C.M 500.00

(SMC SOR,Pg No.6, It No. 61)

Providing & fixing 35mm.th. Indian teak wood

shutters for doors, windows & clearstory

34 windows incl. Indian teak wood frames of finished

size 12cm x 7cm.incl. anodized aluminum fixtures

& fastenings incl. Primer coat of approved quality

& two coats of oil painting etc. For all Floor

(A) Fully Panelled 3.00 S.M 5533.68

(SOR SMC Pg No.5 It No. 53)

DESCRIPTION QUANTITY UNIT RATE AMOUNT

Providing and fixing FRP FRAME size 125 x 65 mm

and 35 mm thick FRP shutter with wood grain

raised panneled design finish shutter having extra

reinforcement on sides & edges in Gel coat finish.

The core of the shutter & frame is to be filed up

with injected polyurethene foam done in situ along

with embedded wooden pieces for stiffening &

also taking hinges & fixtures. The whole FRP frame

& shutter is to be water proof weather

proof,termite proof &resistance to mild

acid/alkali. Rates are to be inclusive of S.S.hinges

with fastener sleeve & alluminium fixtures &

(A)'Same as Above But Without Frame 3.80 S.M 2019.98

(SMC SOR,Pg No.5, It No. 55)

Providing & fixing 35mm.th. Flush Door Solid

Double Core type Both Face water proof Ply

Vennered & 1.5 mm th.laminate shall be pasted

on both side with adhesives as specified by the

manufacturers. The laminate shall be as per

approved shade & texture, of make incl. Sal wood

frames of finished size 12cm x 7cm.incl. S.S. Hinges

with nessary screws & Anodized aluminum fixtures

& fastenings For all Floor

(SOR SMC Pg No.5 It No. 51) MR

Same as Above But Without Frame

All Floor 8.20 S.M 2520.00

(SOR SMC Pg No.5 It No. 52) MR

Providing and fixing window having extruded

aluminium Powder Coated section frame main

outer size 63.50 x 38.10 x1.95 mm (of Jindal

section no.4605, @ Wt. 1.094Kg/mt) horizontal

Two track member size 61.85 mm x 31.75 mm x

1.20 mm (of jindal section no:8687, @ Wt.

Kg/mt.) vertical member of size 61.85 mm x

mm x 130 mm (of jindal section no:8758 @ wt. of

0.659 kg/mt) with sliding shutters of horizontal

member size 40 mm x18 mm x 1.29 mm ( of jindal

37 section no:8949, @ Wt. of .456 Kg/mt) vertical

member of size 40 mm x 18 mm x 1.29 mm (of

jindal section no:8947, @ Wt. of

Kg/mt/section 8948, @ Wt. of 0.457 Kg/mt) with

mm thick tranparent bronze colour tineted float

glass with powder coated aluminium fittings and

fixtures and transparent silicon sealant glass fixing

to frame as per details etc. complete for window.

(A) Same as above but colour anodized 0.00 S.M 1705.67

SMC SOR Alluminium Work ITEM NO.3(A)

DESCRIPTION QUANTITY UNIT RATE AMOUNT

Providing and fixing window having extruded

aluminium Powder Coated section frame main

outer size 95 mm x 24 mm x 1.17 mm (of jindal

section no:2459 @ Wt. of 0.738 Kg/mt),

horizontal Three track member size 92 mm x

31.75 mm x 1.30 mm (of jindal section no;8688,

@ Wt. 1.07 Kg/mt), vertical member of size

mm x 31.75 mm x 1.50 mm (of jindal section

no:8933, @ Wt. 1.06 Kg/mt) with sliding shutters

38 of horizontal member size 40 mm x 18 mm x

mm (of jindal section no:8947 @ wt. of

kg/mt), vertical member of size 40 mm x 18 mm x

1.29 mm (of jindal section no:8949 @ wt. of

kg/mt) with 5 mm thick transparent bronze colour

tinted float glass with powder coated aluminium

fittings & fixtures and transparent silicon sealant

glass fixing to frame as per details etc.

(A) Same as above but colour anodized 11.00 S.M 1591.87

SMC SOR Alluminium Work ITEM NO.2(A)

Providing and fixing standared extruded of

aluminium section of size 61 x 37.0 x0.90 mm

(of Jindal section no.14080, @ Wt. 0.471 Kg

per mt) with Powder Coated alluminium

frame with 5 mm thick transparent bronze

colour tinted float glass as details etc.

complete for fix window

A) Same as above but Colour anodized 1.40 S.M 2336.00

SMC SOR Alluminium Work ITEM NO.5A MR

Providing & laying granite slab 18mm thick in

Window-Door seal Frame Etc laid on 10mm thick

cement mortar 1:4 (1 Cement : 4 Coarse sand)

with nessary adhesive material and finished with

flush pointing in white or colour cement, including

rubbing & polishing comp.. (Basic Rate:-

For all Floors. 33.70 S.M 2026.00

SMC SOR , PAGE No.4 ITEM NO.41 MR

Labour Charges For Edge Finished For Granite for

For all Floors. 282.40 R.M 43.43

SMC SOR, PAGE No.4 ITEM NO.42

Providing & fixing M.S.Grills of required pattern to

wooden frames of windows etc. At all floor levels

with M.S. flats at required spacing & frame around

42 square or round bars with round headed bolts &

round headed bolts and nuts or by screws incl.

Priming coat of Red lead paint etc. comp.

(A) Plain grill For all Floors 582.80 Kg. 104.20

SMC SOR, PAGE NO 5 IT NO

DESCRIPTION QUANTITY UNIT RATE AMOUNT

Painting two coat (excluding priming coat) on

new steel and other metal surface with synthetic

43 enemal paint, burshing to give an even shade

including cleaning the surface of all dirt, dust and

other foreign matters

For all Floors 29.20 S.M 65.31

SMC SOR, COLOUR IT.No. 8, Pg No.15

Providing and fixing stainless steel ( Grade 304) railing

made of Hollow tubes, channels, plates etc., including

welding, grinding, buffing, polishing and making

curvature (wherever required) and fitting the same with

necessary stainless steel nuts and bolts complete, i/c

fixing the railing with necessary accessories & stainless

44 steel dash fasteners , stainless steel bolts etc., of

required size, on the top of the floor or the side of waist

slab with suitable arrangement as per approval of

Engineer-incharge, (for payment purpose only weight of

stainless steel members shall be considered excluding

fixing accessories such as nuts, bolts, fasteners etc.)

SMC SOR, PAGE NO 11 ITEM NO 120, MR 0.00 Kg. 450.00

(1) The whole work is to be executed through

specialized agency with a guarantee of 10 (Ten) years

45 given on a prescribed proforma duly stamped (2) The

rate shall include for work at all floors & conducting

water proof test as directed. (M.R.)

B) Providing and laying integral cement based water

proofing treatment including preparation of surface as

required for treatment of roofs, balconies, terraces etc.

consisting of following operations. (a) Applying and

grouting a slurry coat of neat cement using 2.75 kg/sqm

of cement admixed with proprietary water proofing

compound comforming to IS:2645 over the R.C.C. slab

including cleaning the surface before tratment.(b)

Laying cement concrete using broken bricks/brick bats

25 mm to 100 mm size with 50% of cement mortar 1:5

(1 Cement : 5 Coarse sand) admixed with proprietary

water proofing compound conforming to IS:2645 ,brick

bats is finally covered by jointless cement plaster 20mm

th. in C.M. 1:4 added with special water proofing

compound confirming to IS:2645 & top smooth finished

with trowel with false chequered marking of

mm.size.The treatment is carried along the vertical

surface of the parapet & other adjoining wall up to

height of about 300 mm in a shape of quarter round

vata Incl. curing etc. Comp. With average thickness of

120 mm and minimum thickness at khurra as 65 mm.(c)

The whole terrace so finished shall be flooded with

(c) The whole terrace so finished shall be

flooded with water for a minimum period of

two weeks for curing and for final test. All

above operations to be down in order and as

directed and specified by the engineer-in-

charge. With average thickness of 120 mm and

minimum thickness at khurra as 65 mm.

(Cement consumption 0.511 Bags / S.M.)

Terrace and staircabin top 102.10 S.M 511.00

SMC SOR, PAGE NO 6 IT NO 62 B M.R.

DESCRIPTION QUANTITY UNIT RATE AMOUNT

Providing and laying broken china mosaic

flooring for terrace using 12mm to 20mm

broken pieces of glazed tiles to be laid over

cement mortar 1:3 to plain or slope and to be

46 tempered to bring mortar creme out upto

surface using white cement including rounding

off junctions and extending them upto 15 cm

along the wall clearing with water and oxalic

acid etc. as directed.

SMC SOR, PAGE NO 12 IT NO 131 102.10 S.M 747.29

Apply two coats of putty and two coats of

primer of approved brand and manufacture

on new wall surface to give an even shade

47 including thoroughly brushing the surface free

from mortar dropping and other matter and

sand papered smooth.

(A) for wall and similar surfaces

For all Floors 344.60 S.M 40.59

(B) for ceilings and soffits

For all Floors 81.10 S.M 40.59

SMC SOR, COLOUR IT.No. 4, Pg No.15

Wall painting (two coats) with plastic emulsion

paint of approved brand and manufacture on

undecorated wall surface to give an even

48 shade including throughly brushing the surface

free from mortar droppings and other foreign

matter and sand papered smooth.

(A) for wall and similar surfaces

For all Floors 344.60 S.M 79.39

(B) for ceilings and soffits

For all Floors 81.10 S.M 79.39

SMC SOR, COLOUR IT.No. 5, Pg No.15

Providing & applying two coats of weather shield max

paint (3 coats may be required in case of darker

colours.)of ICI Dulux or Apex Ultima of Asian Paint

including applying exterior acrylic primer coat as per

manufacturers specification and directions in shade and

colour approved by architects, on exterior surfaces of

the building including scaffolding, preparing the surface,

watering, curing etc. complete and as directed by the

architects and manufacturers. Surface Preparation :

surface is thoroughly clean, dry and free from all loose

49 dirt, chalk, grease, fungi, algae and flaking paint. This

can be achieved by brushing with a wire/ stiff coir brush,

followed by water jetting if required. Fill up all minor

cracks and defects with white cement and sand mixture

in the ratio 1:3. For application on previously painted

wall, previous coatings of paint must be thoroughly

scraped off and Clean the surface thoroughly using wire

brushes. Priming: Apply a liberal coat of exterior acrylic

primer and allow it to dry for 4-5 hours. Application of

putty is not recommended. Minimum 4-6 hours

duration is required between each coat of weather

shield max paint

For all Floors 250.30 S.M 82.00

SMC SOR, colour works,Pg No.16,item no.-17

DESCRIPTION QUANTITY UNIT RATE AMOUNT

Providing & laying granite slab 18mm thick in

flooring, treads of steps and landing laid on

bed of 20mm thick cement mortar 1:6 (1

Cement : 6 coarse sand) or lime mortar 1:1.5

50 laid and finished with flush pointing in white

or colour cement including rubbing and

polishing complete. (Basic Rate:-

For all Floors. 0.00 S.M 2410.00

SMC SOR 15-16, PAGE NO 4,IT NO 39 M.R.

Providing & laying granite slab 18mm thick in

skirting, risers of steps, dedo and pillars laid

on 10mm thick cement mortar 1:4 (1 Cement :

4 Coarse sand) and finished with flush pointing

in white or colour cement including rubbing &

polishing comp.. (Basic Rate:- Rs.1347.46/S.M.)

SMC SOR 15-16, PAGE NO 4,IT NO 40 M.R.

Providing and fixing M.S. Fan clamps type 1 to

16 mm dia M.S. bar bent to shpe with hooked

ends to RCC slabs curing, layig including

painting the exposed portion of loops, all as

per standard design complete.

For all Floors. 5.00 Nos 129.02

SMC SOR , PAGE NO 5, IT NO

Steel work welded in built up sections, framed

work including cutting, hoisting, fixing in

position and applying a priming coat of red

lead paint (A) in beams & joists channels

53 angles, tees, flats with connection plates or

angle cleats as in main & cross beams,hip &

trussed purlins connected to common raffers

For all Floors. 0.00 Qtl. 9047.86

SMC SOR ,Pg No.9,IT NO 98(A)

Providing & fixing in position collapsible steel

shutters with vertical channels 20 x10 x

mm. Braced with flat iron diagonals 20 x5mm

size with top & bottom rails of T-iron

54 40x40x6mm. with 38mm dia. steel pulleys

comp. with bolts, locking arrangements,

stoppers, handles incl. applying a priming coat

of Redlead paint etc. comp.

Ground Floor 9.50 S.M 5865.10

SMC SOR , PAGE NO 5, IT NO

Providing & fixing at all floor levels,both face

polished machine cut edge Marble slab for

urinal partition joined with grey/White

cement slurry (1:1) incl. Rubbing & polishing

etc. complete. (M.R.)( Basic Cost- Rs. 450/S.M.)

DESCRIPTION QUANTITY UNIT RATE AMOUNT

SMC SOR, PAGE NO.7,IT NO 66 (MR) 7.50 S.M 1050.00

Wall Vinyl Sticker

SMC SOR, PAGE NO.14,IT NO 146 (MR)

Eco Solvent Vinyl Sticker (120 gsm) with

Lamination (100 gsm)

SMC SOR, PAGE NO.14,IT NO 147 (MR)

Solvent Vinyl Sticker (120 gsm) with

Lamination (100 gsm)

SMC SOR, PAGE NO.14,IT NO 148 (MR)

5mm PVC sheet Eco Vinyl (Any size)

SMC SOR, PAGE NO.14,IT NO 149 (MR)

Decorative theme base designing & painting

with all waterproof materials

SMC SOR, PAGE NO.14,IT NO 150 (MR)

TOTAL COST OF SUPER STRUCTURE

Water Supply & Sanitation

Prov.& Fixing water closet squatting pan

(Orissa type W.C.pan) at all floor levels, size

500mm x 400 mm incl. 100 mm size "P'or "S"

trap for water closet squatting pan joining the

trap with the pan & soil pipe in C.M. 1:1

(1cement :1 fine sand) etc. Comp.(A) Vitreous

Make- Cera S3010109, Parry ware C0117CS/

C0117*, Jaquar,HindWare

For all Floors. 2.00 Nos. 3275.00

SMC sor- Sanitary Items,Page no22,It No.

Providing and fixing Wash Down Water closet

European type W.C. pan with integral P or S

trap with normal closing seat cover L bend

62 ncluding jointing the trap with soil pipe in

cement mortar 1:1 (1 cement : 1 find sand) (A)

Viterous china pattern - I

Make- Cera CONVENTIONAL B1510121 , Parry

ware C0297*/ C0278,HindWare sleek

Jaquar- CNS-WHT-751P180SPPZ

SMC sor- Sanitary Items,Page no21,It No.

Providing and fixing plastic seat and cover for

wash down water closet with C.P. brass hinges

and rubber buffers (B) Plastic seat and cover.

For all Floors. 2.00 Nos 291.33

SMC sor Page no7 It No.

Providing & fixing Wash Hung basin with

single hole for pillar tap , Size- 550 x 400 mm

at all floor levels, with C.I. or M.S. Brackets

painted white incl. cutting holes & making

good the same etc. complete. For all Floor

DESCRIPTION QUANTITY UNIT RATE AMOUNT

Make- Cera Cat. No. S2040121, Parry

wareC0434* (CTH), Jaquar SLS- WHT -6801 1.00 Nos 2656.00

SMC sor- Sanitary Items,Page no21,It No.

Providing & fixing 600 mm.x 450 mm. mirror

of superior glass at all floor levels, mounted

on 6 mm. th. A.C. sheet or plywood sheet &

fixed to wooden plugs with C.P.brass screws

and washers etc. For all Floor

All Floor 1.00 Nos 833.73

SMC sor Page no7 It No.

Providing & fixing C.P. brass pillar cock with

66 copper connection, C.P. brass screws complete

Make- Cera F2013101, Parry ware Cat. No.:

G3102A1, HindWare Cat. No.: F650003, Jaquar 2.00 Nos 1423.00

SMC sor Sanitary Items,Page no21,It No.

Providing & Fixing 15 mm Dia bib tap with wall

67 Flange at all floor levels, polished bright etc.

Make- Cera F2013151 BIB COCK, Parry ware

G3104A1, HindWare F280002 BIB COCK, 10.00 NO 1323.00

Jaquar FLR-5047 N BIB COCK

SMC sor Sanitary Items,Page no21,It No.

Providing flush cock consisting lever, cartridge

68 sleeve & flange & concealed part

Make- Cera EXPOSED PART F2013751

&Concealed part F4060101 , Parry ware

T9824A1&T9823A1, Jaquar FLR 5083 KN

CONCEALED BODY ALD-081,HindWare

F280052 & CONCEALED STOP COCK F850105

SMC sor Sanitary Items,Page no21,It No.

Providing & fixing 15mm C.P. brass angle

valve (Stop Cock) with C.P. copper connecting

pipe 450 mm long and nuts, washer and brass

flange complete, including cutting and making

good the wall where required.

Make- Cera, Parry ware,HindWare

For all Floors. 2.00 Nos 1432.00

SMC sor- Sanitary Items,Page no21,It No.

Providing and fixing Towel Ring fabricated

from seamless stainless steel tube 2mm thick

in bath room with polished wall flange at end

of bars with heavy duty anchor fasteners &

Make- Cera, Parry ware, Jaquar ,HindWare

For all Floors. 2.00 Nos 890.00

DESCRIPTION QUANTITY UNIT RATE AMOUNT

SMC sor Sanitary Items,Page no21,It No.

Providing & Fixing stainless steel recessed type

Soap dish of approved make. Including

providing & fixing screws, washers, cutting &

making good the walls.

Make- Cera, Parry ware, Jaquar ,HindWare

For all Floors. 2.00 Nos 793.00

SMC sor Sanitary Items,Page no21,It No.

Providing and fixing PVC SWR Nahni trap IS

14735 for drain - 110x110 mm diameter with

jali of the following nominal diameter of self

72 cleaning design with C.I. scread down or

hinged grating including the cost of cutting

and making good the walls.

All floor 5.00 558.36

SMC sor.Page no 8,It No.

Providing & Fixing U-PVC pipe (SWR)

confirming to IS no. 13592 (Type "B") of

Prince/ Supreme/ Jain/ Astral/ Tulsi/ Finolex

make for soil and waste discharge system at all

floor levels incl. All fixtures like bends, tees,

shoe etc. jointed with resin of approved brand

& manufacture etc. comp. (M.R.)

SMC sor,Page no 8 It No. 84 M.R.

Providing & fixing U-PVC pipes Confirming to

IS no. 13592 (Type "A") of

Prince/Supreme/Jain/Astral/ Tulsi/ Finolex

74 make for rain water at all floor levels incl.

fixtures like bends, tees, shoe etc joined with

resin of approved brand & manufacture etc.

SMC sor ,Page no 8, It No. 85 M.R.

Providing & Fixing in position PVC Cowl vent

Prince/Supreme/Jain/Astral/Tulsi/Finolex

SMC sor- Page no.8, It No.

Providing & Fixing Kathi around the vertical

PVC drainage pipes for concealing with

cement plaster 20 mm avg thickness(CM 1:3 [1

cement :3 coarse sand]) finishing as per

instruction given by Eng. incharge. for

(A) 75 mm PVC PIPE 30.00 R.M 173.00

(B) 100 mm /110 mm PVC PIPE 8.00 R.M 180.00

SMC sor- Page no 8, It No. 93 MR

DESCRIPTION QUANTITY UNIT RATE AMOUNT

Providing, Laying and jointing on true line and

level UPVC pipe (SCH-40) line of Prince/

Supreme/ Jain/ Astral/ Tulsi/ Finolex make

including fittings make or equivalent as

approved by angineer-in-charge. Pipe shall be

77 fixed on the wall the help of clamp at every

two meter C/C or shall be concealed as

directed including necessary fittings etc.

including testing of pipe and joints and fixing

the same with adhesive solvent, including cost

of all materials.

SMC sor Page no 8 It No.

Providing & Fixing P.V.C. pipes (SCH-80) of

Prince/ Supreme/ Jain/ Astral/ Tulsi/Finolex

make for water supply line at all floor levels

incl. fixtures like bends, tees, shoe etc joined

with resin of approved brand & manufacture

78 etc. comp. Pipe shall be fixed on the wall the

help of clamp at every two meter C/C or shall

be concealed as directed including necessary

fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent,

including cost of all materials.

SMC sor Page no 8 It No. 87 MR

Providing and fixing M.S. holder bat clamps at

all floor level,of approved design to C.I. or S.C.I

79 pipes including cost of cutting holes and

making good the wall etc. comp. (M.R)

SMC sor- Page no 8, It No.

Providing & fixing Z - clamps at all floor levels

of approved design to C.I. S.C.I. or PVC pipes

including the cost of cutting holes & making

good the wall etc.

(B) 75 to 90 mm Dia 7.00 NO 75.00

(C) 150 mm to 200 mm dia 0.00 NO 98.00

SMC sor- Page no 11, It No. 121 M.R.

Providing & Fixing gun metal check or non

81 return full way wheel valve at all floors levels,

SMC sor Page no 8,It No.

Providing & Fixing abonite ball cock of

approved qualities directed etc. comp.

DESCRIPTION QUANTITY UNIT RATE AMOUNT

SMC sor- Page no 8,It No.

Providing, Lowering & laying joining R.C.C.

NP2 CLASS Pipe In C.M. 1:1 of following

nominal internal diameters incl. Testing of

pipes and joints etc. Comp.

SMC sor- Page no.7, It No.

SMC Storm drainage SOR 20-21, Page no1 It

Prov. & Fixing S.W. Gully trap with C.I.grating

brick masonary (C.M 1:5)chamber & water

tight C.I. cover with frame of 300mmx300mm

size (inside) with weight includ. plastering

smooth inside & outside 15mm. th' in C.M.1:3

etc. comp. (i) Square mouth traps---(A) 100mm

x 100mm Size -P type

SMC sor,Page no 7, It No. 73 4.00 Nos 1292.19

Prov. & Fix. 10 cm.x15 cm.(4" x 6") S.W. trap

with Inside dimension ,455 x 610 mm &

mm deep sewer trap chamber with 23 cm th'

B.B. masonary walls in C.M 1:5 with cement

plaster 15 mm th' in C.M. 1:3 inside & outside

85 to exposed faces, R.C.C. top slab with 1:2:4 mix 0.00 No. 3155.63

( 1 cement: 2 Sand : 4 Grade stone aggregate

20mm size) ,Foundation concrete 1:5:10 &

fixing C.I. cover with frame to be not less than

38 kg. On top etc. comp. for single pipe.

(A).Same as above but Precast RCC heavy duty

Cover instead of C.I. Cover

Extra for every additional depth of 0.1 0.00 Each 222.71

mt.beyond 0.45 mt.

SMC sor, Page no.7, It No.75

Providing & construction simple chamber of

23 cm. th' B.B. Masonary in C.M 1:5 with

cement plaster 15 mm th' in C.M. 1:3 inside &

outside to exposed faces, R.C.C. top slab with

1:2:4 mix ( 1 cement: 2 Sand : 4 Grade stone

86 aggregate 20mm size) ,Foundation concrete 0.00 No. 2932.93

1:5:10 & fixing C.I. cover with frame to be not

less than 38 kg. On top etc. comp. Inside

dimension,455 x 610 mm &450 mm deep for

(A).Same as above but Precast RCC heavy duty

Cover instead of C.I. Cover

Extra for every additional depth of 0.1 0.00 Each 242.39

mt.beyond 0.45 mt.

SMC sor - Page no7,It No.76

Providing and fixing C.I. manhole cover

87 mt. x 0.45 mt. size having weight not less than

35 kg. etc. complete.

SMC sor- Page no.8, It No. 83 2.00 NO 958.17

DESCRIPTION QUANTITY UNIT RATE AMOUNT

Providing and fixing G.I, Rain water spout of

50 mm dia and 30 cm Length

SMC sor- Page no 6 It No. 64 6.00 NO 101.91

Providing & fixing white vitreous china urinal

of size 450 x325mm as per IS-2556 (Part-2 )

with C.I. hangers and 15mm dia. C.P.

89 spreader,32mm dia CP bottle trap and pipe to

wall with C.P. flange complete including

cutting and making good the walls and floors

wherever required.

Make- CeraCat. No. S4020103, Parry ware

C0501*, Jaquar URS-WHT 13261H ,HindWare 1.00 NO 2476.00

SMC SOR- Sanitary Items,Page no.21, It No.8

Providing & fixing at all floor levels,both face

polished machine cut edge Marble slab for

urinal partition joined with grey/White

cement slurry (1:1) incl. Rubbing & polishing

etc. complete. (M.R.)( Basic Cost- Rs. 450/S.M.)

SMC sor- Page no7 It No. 66 MR 1.00 S.M 1050.00

Providing & laying ordinary C.C.1:1.5:3 mix for R.C.C.

work incl. boxing, centering, vibrating, curing & mixed

with approved water proofing cement compound or

"CEMWET"or"PIDICRETE LW"integral water proofing

admixture as water proofing agent to be mixed with

kg. cement bag shall be as recommended by the

manufacture of the water proofing material, concrete

work for top, bottom slab & side pardi for Under ground

Tank & Item incl. Necessary excavation & refilling the

91 available earth, 15 cm th' C.C 1:4:8 for bedding

concrete, Half B.M. in C.M. 1:4 outside wall, inside

R.C.C. pardi as per design, 10mm.th. water proofing

cement plaster in C.M. 1:3 with smooth

finishing,watering etc.Comp.to all inner face & bottom

of tank curing etc. comp. incl. Locking arrangement,

outlet, inlet, overflow & wash out pipe arrangement as

necessary & C.I. Cover 0.60 x .045 weight not less then

35kg. etc. com. as per structural drawing excluding Steel

& as directed by Engineer in-charge

Under Ground water Tank 5000.00 Lit 5.46

Providing & Laying white glazed tiles 6mm. th.

of Orient, Kajaria, Jhonson,Nitco,Somani ,Bell

make at all floor levels, in flooring, treads of

steps & landings laid on a bed of 12 mm. Av.

Th.C.M.1:3(1cement :3 sand) finished with

flush pointing in white cement etc.com. For all

Under Ground water Tank 5.50 SM 857.42

SMC SOR, Page no4, It No.

DESCRIPTION QUANTITY UNIT RATE AMOUNT

Providing & Laying white glazed tiles 6mm. th.

Of Orient, Kajaria, Jhonson,Nitco,Somani,Bell

make at all floor levels in skirting risers of

steps & dado on 10 mm. th. C.M.1:3(1cement

:3 sand) including necessary cement paste for

fixing and joined with white cement slurry etc.

complete. For all floors

Under Ground water Tank 14.00 SM 887.64

SMC SOR, Page no4, It No.35

Providing & fixing IS Mark TMT Bar FE 500D

reinforcement for R.C.C. work incl. bending,

binding & placing in position etc. comp. Upto

Upto G.L./P.L. 540.00 Kg. 76.21

SMC SOR- Page no1, It No.

Providing erecting and fixing double coated

Sintex / Super / Reno PVC (ISI) mark water

95 tank of required capacity each with all 4000.00 Lit 3.95

necessary fittings & connection etc. complete

SMC SOR- Page no 8, It No.

Total cost of Water supply & sanitation

TOTAL (A) CIVIL WORK

(B) Area & Ground Development

(a) PAVER BLOCK

Box Cutting the road surface to proper slope and

camber for making base includinng removing the

1 excavated stuff and depositing on the road side

slope as directed up to 50 mt. lead.

(SOR SMC GD It No. 01)

Preparation of subgrade with Compacting,

Levelling and consolidation of subgrade with

miniroller /plate vibrator machine including

watering and filling in depressions which occur

during the process as directed by engineer in

charge. 10.00 S.M. 4.93

(SOR SMC GD It No. 02)

Providing & laying Granular sub base (GSB)

confirming to Grading-V of Table 400.0 of

compacted thick of 150mm with specified graded

stone metal and sand mixed in place and laid with

mechanical means spreading with motor grader

3 and compacting with vibratory roller having

minimum 80-100 KN static weight to acheve

desired density of 98% of MDD including all

material, labour, machinery with all leads and lift

(SOR SMC GD It No. 09)

Providing & Laying C.C1:5:10 (1cement :5coarse

sand :10 graded stone agg. 40 m.m Nominal size

)& curing comp. excl. cost of from work in

:Foundation & Plinth 1.50 C.M. 2517.44

(SOR SMC It No. 03)

DESCRIPTION QUANTITY UNIT RATE AMOUNT

Providing and laying 200 micron plastic sheet on

prepared sub base For V.D.S Concrete 0.00 S.M. 26.00

(SOR SMC GD It No. 12) MR

Supplying & filling fine sand(pana) in 75 mm /

mm / 150 mm compacted thickness over the base

including necessary compaction, watering etc.

6 complete. Item includes leveling by using vibratory

plates compacted machine and as directed by

engineer in charge

(SOR SMC GD It No. 04)

Providing 100mm thick readymade C.C. kerb of

strength M-20 (size 300mm x 380mm) purchased

from SMC's approved paverblock manufacturer &

setting in line, level and in truly vertical position,

including filling joints in C.M. 1:1 (1 part of cement

: 1 part of stone dust) smooth pointing in C.M. 1:1

(1 part of cement : 1 part of coarse sand) including

watering etc. complete and as directed by

engineer in charge.

R.C.C kerb 380 mm depth and 300 mm width 10.00 R.MT 228.00

(SOR SMC GD It No. 06)

Providing interlocking type Rubber moulded

cement concrete paver block of approved shape,

design & colour having 60mm thickness (M-35)

purchased from SMC's approved paverblock

manufacturer only & fixing of fine sand bedding.

Item includes levelling by using vibratory plates

compacted machine. Item also includes all

materials, labour, equipments, tools, plants,

watering, cleaning etc. complete.

With colour 5.00 S.M. 524.00

Without colour 5.00 S.M. 524.00

(SOR SMC GD It No. 07) MR

Providing & filling with Mix soil in layers of 20 cm.

9 Th'. Incl. watering, ramming & consolidation etc.

complete. 2.00 C.M. 206.00

(SOR SMC GD It No. 03)

Filling in foundation and plinth with murrum or

selected soil in layers of 20cm. thickness including

watering, ramming and consolidating etc.

complete. 5.60 C.M. 289.06

(SOR SMC It No. 11)

Providing & laying cement concrete Pavement

using 1:1.5:3 (1 cement:1.5 sand:3 graded stone

agg. 20 mm nominal size) & Vaccuum Dewatering

technique including floating surface with a skim

powder floater, curing etc. complete

Internal road 0.00 C.M. 5981.00

(SOR SMC GD It No. 10) MR

Cutting of Groove 5 to 7 mm thick in VDS for depth

1/3 of total thickness with filling of epoxy sealent

as directed by engineer in charge

(SOR SMC GD It No. 13)

Providing and fixingTMT/CRS bar reinforcement

13 for R.C.C. work including binding and placing in

position etc. comp.

DESCRIPTION QUANTITY UNIT RATE AMOUNT

Upto G.L./P.L. 0.00 Kg. 76.21

(SOR SMC It No. 15)

Providing and fixing rebar of following diameter

using chemical grout of Swanchore/Hilti/Fischer or

equivalent make including cost of all equipments,

tools, material, labour, etc. Standard procedure as

mentioned in manufacturer's specifications shall

be strictly followed, which shall be submitted and

got approved from the authority prior to start of

work. The rate shall also include cost of drilling of

14 hole of required diameter and depth as mentioned

in manufacturer's specification, cleaning the hole

with required air blower and other necessary tools

and tackles, positioning, providing and grouting

chemical, allied fixtures and fasteners, etc. but

excluding the cost of reinforcing bar etc. complete.

Item includes necessary scaffolding, staging,

labour, tools and equipments, etc. complete as

directed by the engineer-in charge.

(SOR SMC It No. 126) MR

Dismentalling of R.C.C work by electric breaker, rate

15 to include all lead, lift , scaffoulding, transportation, and 50.00 Hr. 125.00

labour etc. complete. As directed by engg. Incharge.

Total amount of Paver Block & VDS Road

Total amount of Paver Block & VDS Road

(b) Water Supply & Sanitary

Providing & construction simple chamber of 23 cm.

th' B.B. Masonary in C.M 1:5 with cement plaster

15 mm th' in C.M. 1:3 inside & outside to exposed

faces, R.C.C. top slab with 1:2:4 mix ( 1 cement:

1 Sand : 4 Grade stone aggregate 20mm size)

,Foundation concrete 1:5:10 & fixing C.I. cover

with frame to be not less than 38 kg. On top etc.

comp. Inside dimension,455 x 610 mm &450 mm

deep for single pipe 1.00 No 2932.93

(SOR SMC It No. 76)

Providing, Lowering & laying joining R.C.C. NP2

CLASS Pipe In C.M. 1:1 of following nominal

internal diameters incl. Testing of pipes and joints

(SOR SMC It No. 77) & STROM DRAINGE SOR

DESCRIPTION QUANTITY UNIT RATE AMOUNT

Providing & Fixing P.V.C. pipes (SCH-80) of Prince/

Supreme/ Jain/ Astral/ Tulsi/Finolex make for

water supply line at all floor levels incl. fixtures like

bends, tees, shoe etc joined with resin of approved

brand & manufacture etc. comp. Pipe shall be fixed

on the wall the help of clamp at every two meter

C/C or shall be concealed as directed including

necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent,

including cost of all materials.

(SOR SMC It No. 87)

Providing & Fixing C.P. Brass screw down bib tap

4 at all floor levels, polished bright etc. comp.

(SOR SMC It No. 80)

Providing & Fixing gun metal check or non return

5 full way wheel valve at all floors levels, etc.

(SOR SMC It No. 80)

Total amount of Water Supply & Sanitary

Total amount of Water Supply & Sanitary

LAWN : Area cleaning and side grading,

removing unwanted materials, plants,

chrubs,wild grass, weeds,debris,rubbish,etc.

Excavating up to depth 30 C.M surface dressing

leveling, making slopes for drainage according

to landscape, Disposal of unwanted materials

with all labour and tools. Development of lawn

including preparation of bed ground, spreading

and mixing the good soil with Farm Yard

Manure, Gypsum, fertilizer soil with farm Yard

1 Manure, Gypsum, Fertilizer bas required hand

specified. Planting of lawn grass bits roots of

approved quality, watering and specified.

Planting of lawn grass bits roots of approved

quality, watering, and specified. Planting of

lawn grass watering mowing, weeding etc.

maintenance of developed lawn for a period of

(As per Garden Dept.)

DESCRIPTION QUANTITY UNIT RATE AMOUNT

Supplying on site plants with following

specifications . Plants would be in good

condition and of specified height. The rates

would be inclusive of all taxes, sales tax,

2 Octroi,transportaion etc. complete F.O.R. site.

Conditions of plant would be verified at the

time of selction as well delivery. All complete

and as per instructions of the Engineer-in-

Lagerstroemia thorell II - 3.66m ht 0.00 Nos. 270.00

Millingtonia hortensis - 3.66m ht 1.00 Nos. 270.00

Azadirachta Indica - 2.13m ht 2.00 Nos. 270.00

Gresses & Bamboos

Bambusa valgaris - 1.83m ht. 5.00 Nos. 75.00

Nephrolepis exalotta smithi - 0.45x0.30m 10.00 Nos. 20.00

Champa - 3.66m ht. 0.00 Nos. 270.00

(As per Garden Dept.)

Total amount of garden =

Total amount of garden =

TOTAL (B) AREA & GROUND DEVELOPMENT

(C) Electrification Work

Description Total Qty. Unit Total With Total

INTERNAL WIRING

Point wiring for Light / Bell with 2-1.5 sq.mm

& earth wire of 1.5 sq.mm (Green) both are of ISI

1.1 KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length , in below type

of pipe erected with 6A Modular type switch /

bell push & accessories and earth continuity of

following type, erected on PVC /

1 Metallic/Wooden box, single mounting base 20 Pt. 471.92

frame covered with

textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

complete Cat. III

Point wiring for secondary light point with 2-

1.5 sq.mm & earth wire of 1.5 sq.mm (green) both

are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires, in below

type of pipe to be erected complete with earth

continuity and necessary connection with primary

light with accessories erected on Metal / PVC /

wooden box covered covered with appropriate

2 front plate modules erected on / in wall / ceiling for 5 Pt. 159.08

open / concealed wiring. with necessary Lamp

holder / ceiling rose / H.D.Connector as

directed.as per pipe erected with following type

of accessories.

Note:- Maximum up to 6 mtrs length, excess will

(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

DESCRIPTION QUANTITY UNIT RATE AMOUNT

Point wiring for FAN with 2-1.5 sq.mm & earth wire

of 1.5 sq.mm (Green) both are of .ISI marked

KV Grade FRLS PVC insulated multi strand copper

wires up to 10 mtr length, in below type of pipe

erected with 6A Modular type switch and hum free

EME step type electronic fan regulator mounted

and accessories with earth continuity of following

type erected on PVC

3 / Metallic/Wooden box, single mounting base 2 Pt. 660.69

frame covered with textured/metallic/white

front plate modules erected on / in wall /

ceiling as per pipe erected. with necessary ceiling

rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

complete, Cat. III

Point wiring for Individual Plug with & earth wire

1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected

complete with Modular type switch & 5 pin Plug

erected on PVC/ Metallic/Wooden box covered with

4 appropriate front plate modules erected on / in wall 10 Pt. 497.37

/ ceiling as per pipe erected with following type of

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu.

Wire from nearby switchboard/mcb db board

(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

complete, Cat. III

Point wiring for Individual Plug with & earth wire

1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected

complete with Modular type switch & 5 pin Plug

erected on PVC/ Metallic/Wooden box covered with

5 appropriate front plate modules erected on / in wall 5 Pt. 697.91

/ ceiling as per pipe erected with following type of

[II] For 16A Plug and 16 amp switch with 2-

2.5 sq.mm Cu. Wire from mcb db board.

(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

complete, Cat. III

Point wiring for on board Looped Plug with

6A Modular type switch & 5 pin socket erected

on PVC / Metallic/Wooden box, single mounting

6 base frame covered with textured / 5 Pt. 253.46

metallic/white front plate modules erected on / in

wall / ceiling with following type accessories, Cat. III

Point wiring for Two Way Controlled Light

Point with 2-1.5 sq.mm & earth wire of

sq.mm (green) both are of .ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper

wires erected in below type of pipe with 6A

Modular type switches and following type of

accessories erected on PVC / Metallic/Wooden

7 box, single mounting base frame covered with 1 Pt. 588.58

textured / metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected.

with necessary batten/angle holder or ceiling rose

or H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

complete, Cat. III

DESCRIPTION QUANTITY UNIT RATE AMOUNT

Providing following type of Modular

Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame

covered with textured/ metallic/white front plate

modules erected with necessary connections as per

site situation directed by Engineer In charge.

(1)One No. SP 6 Amp.Cat. III 10 Ea. 151.65

(2) One No 5 pin plug 15 Ea. 151.65

(3) Two Pin/RJ-11 Telephone Socket

[A] For One Gang, Cat. III 1 Ea. 161.20

[B] For Two Gang, Cat. III 1 Ea. 211.03

(4) TV Co-axial Socket outlet, Cat. III 1 Ea. 161.20

(7) Blank Plate Single, Cat. III 1 Ea. 25.45

(8) Computer RJ-45 socket, Cat. III 1 Ea. 161.20

(22) 16/20/25 Amp. Modular Starter for Motor /

(19) Modular Indicating Call Bell, Cat.III 1 Ea. 329.81

(20) Modular Buzzer, Cat.III 1 Ea. 150.59

Providing and erecting ISI mark Medium class

RIGID PVC PIPES of following size complete to

be erected on/in wall or ceiling erected with

necessary PVC fittings & Junction boxes fixed

9 with adhesive solution & Clamps with following

dia of pipes, in approved manner as directed.

Providing & erecting PVC Corrugated

Flexible Conduit with required nos. of coupling,

PVC bushes, Check-nuts etc. complete of following

Supplying & erecting UPVC Mini trunking

(PVC Casing-n-Capping) having

double-locking arrangement with grooves, trunking

of size not below

12.5 mm in height as per IS with accessories

of PVC/Resin polypropylene not below 1.8 mm thick

duly sealed in joint & erected on wall / ceiling of

following size .

Providing and erecting Mains with 1.1 KV grade

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with

12 1.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green

(A) With medium colour

class Rigid forpipe

(a) 2 wire 1.5 sq. mm 150 Mtr. 59.59

(b) 2 wire 2.5 sq. mm 70 Mtr. 78.78

providing and erecting Mains with 1.1 KV grade

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected

in / on wall/ ceiling with 2.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following size

(A) with medium class Rigid PVC pipe and

(a) 2 wire 4 sq. mm 20 Mtr. 107.06

DESCRIPTION QUANTITY UNIT RATE AMOUNT

Providing & Erecting approved make following size

of TV Co-axial flexible cable comprising

inner conductor of solid bare copper insulated with

Foam PE & Secondary conductor made of poly -

Aluminium film bonded Al. Braids @ suitable

coverage overall sheathed with black PVC

Providing & erecting Switch board for

Computer or electric apparatus consisting of

following items in single board erected on PVC /

Metal/Wooden board concealed/open with 3 mm

thick PC (Polycarbonate) / Acrylic sheet erected as

1 no. 6A/16A universal plug-switch combined. 3 nos.

3 nos. 6A 5 pin Plug

For Modular Type Accessories, Cat. III 1 Ea. 1081.71

Decorative call bell Ting-tong box type

16 volts 1 Ea. 68.68

complete erected

L.T. SWITCHGEAR AND DIST. BOARD & L.T. PANEL

Providing and erecting Sheet Steel powder coated

MCB distribution board - flush / surface

mounted fitted with busbar, neutral link, earth

bar and DIN rail, Conforms to IS 8623-1 &

IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be

used of same company of MCB to be used)

(A) single phase incoming and horizontal

single phase outgoing

(b) sheet steel double door (IP-43)

providing and erecting Miniature circuit

breaker single pole 6A to 25A suitable to

operate on 240 V

A.C. system and having breaking capacity 10 KA to

be erected in existing box. confirming to IS

8828/1996 with ISI Mark, Cat. III (10 Amp)

Providing & erecting 240 V MCB double pole

switch for lighting Load (B Curve) having 10 KA

19 breaking capacity & confirms to IS : 8828 in existing 1 Ea. 278.76

box having following capacity (A) 25 Amp. &

providing and erecting Approved make

RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit withstand

capacity of 10 KA and suitable for operation on

single phase 240 V,50Hz. having characteristic of

quick action & tripping with all advance feature &

do not incorporate any electronic component. for

following Max. rating erected as directed (i)

Amps.DP, Cat III

(i) 25 Amps. DP, Cat. III 1 Ea. 1969.50

providing and erecting Approved make

RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit withstand

capacity of 10 KA and suitable for operation on

single phase 240 V,50Hz. having characteristic of 1 Ea. 2235.13

quick action & tripping with all advance feature &

do not incorporate any electronic component. for

following Max. rating erected as directed (i)

Amps.FP, Cat III

(ii) 40 Amps. FP, Cat. III 1 Ea. 2637.11

DESCRIPTION QUANTITY UNIT RATE AMOUNT

Providing & erecting 240 V MCB double pole

switch for motor & inductive load (C Curve)

22 having 10 KA breaking capacity & confirms to IS : 1 Ea. 299.97

8828 in existing box having following capacity (A)

Plastic enclosure fitted with DIN rail suitable

for incorporating One / Two nos. MCB

Plastic enclosure fitted with DIN rail suitable

for incorporating Three /Four nos. MCB

Sheets steel powder coated enclosure suitable

for incorporating One/Two nos. MCB.

Providing and erecting metallic vitrified

danger notice board as per language suggested

26 by engineer incharge for MEDIUM VOLTAGE 1 Ea. 69.69

installation to be erected as per IS-2551.

Providing & erecting Medium Voltage Danger

Notice Board sticker as per language suggested

by engineer incharge of standard size as per IS-2551

providng and erecting Approved make single

phase electronic energy meter rating

5A/20A/40A based on ASIC (Application Specific

integral circuit) digital technology with accuracy

28 Class-I, temper proof, free from effect of external 1 Ea. 1738.21

magnetic field with phase, earth, reverse and

impulse indications, 6 digit electro- mechanical

counter suitable to work on 120 V to 300V, 45 -

Hz., housed in robust enclosure complete to be

INDOOR LIGHTING ITEM

Supplying and erecting LED indoor fittings with

LEDs of wattage 0.2 Watt to 0.5 Watt assembled

on single MCPCB, with housing used as a heat

sink shall be made of thick sheet Steel conforming to

IS: 513/CRCA/ aluminium die cast powder coated

and high U.V. & corrosion resistance with

diffuser with company mark/name 160V to

270V, Power Factor more than 0.9, THD < 15%,CCT

3000 K to 6500K,Luminaire efficacy>

lumens/watt ,LED LED driver efficiency > 85 %(

fitting required LM-79 & LM-80

Certificates)(NOTE: Below description

(A) Tube Light with integral driver have

(i) 5-10 Watts, Surge-2 KV, IP-20, conventional 1 to

(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional

(v) 36-40 Watts, Surge-2 KV, IP-20, conventional

Supplying and erecting LED lamps with

following wattage capacity of 220 to

voltage, minimum 15000 burning hours life,

500 V in built-surge protection,Polycarbonate

diffuser, mounting suitable for E14 / E27 / B22

30 lamp holders, pf >=

(A) LED Lamps integral type, with PC diffuser

(i) 2 to 3 watts 1 Ea. 69.69

(iii) 10 to 15 watts 4 Ea. 188.87

FAN AND RELEATED ITEM

Providing & erecting Approved make Ceiling Fan with

double ball bearing ISI mark with Condenser 230 volt

A.C.50 Hz. 1200 mm sweep complete having 4 blades

31 Aluminium body and blade sets having ornamental 3 Ea. 2358.35

design shanks, canopy erected with earthing [ Make

shall be approved by Engineer in Charge]

DESCRIPTION QUANTITY UNIT RATE AMOUNT

Supplying and erecting 19 / 20 mm. nominal

bore Medium Class M.S. Pipe down rod

erected duly painted for fan complete with

proper insulation without leakage and earthing.

Supplying & erecting fan hook box of 10 mm

M.S. round bar bounded to the RCC bars up to 50mm

length each side and pierced through a 16 Gauge

M.S. box / Heavy Duty PVC box complete erected

concealed in Ceiling with necessary finishing.

Providing 2.5mm.thick laminated acrylic sheet

cover the fan hook or Fan box.

Providing & erecting fresh Exhaust air fan

35 mm dia with square frame make of ABS body 2 Ea 1559.44

with louvers, Cat. III

Supplying and erecting approved make

oscillating type medium duty bracket fan

with Aluminium Blades A.C. 23OV. 50cy/s, with

thermal overload protection wall mounted with

36 height adjustment and rotary tilting device complete 1 Ea. 3518.84

with guard, pull cord for speed and oscillation

flexible Core plug top complete erected with lead

wires as directed.

EARTHING SYSTEM

Providing and erecting required size HOT

deep Galvanised iron strip for earthing of H.T.

37 OCB/ ACB/ Transformer LT panel board, Motors etc. 2 Kg. 77.77

Providing and erecting Annealed bare Copper wire

Providing and erecting HOT deep Galvanised

39 iron 5 Kg. 77.77

strip wire 8 to 16 SWG.

Supplying & erecting in earthpit of minimum bore

dia. 225mm size approved make Safe Earthing

Electrode consisting Pipe-in-Pipe Technology as

per IS 3043- 1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 80 mm

having 80-200 Micron galvanising, Inner pipe dia

of 40 mm having 200-250 Micron galvanising,

40 connection terminal dia of 14 mm with constant

ohmic value surrounded by highly conductive

compound with high charge dissipation suitable

for following type of applications with

chamber and heavy duty cover.(approved make

OEM has to submit test certificate including value

of earth resistane of installation.

[B] For Electrical installation up to 11 KV located

in other than normal soil i.e. Soft Rock, Marshy Soil

-Length of Pipe : 2 mtr

-Back filling Compound :1 no. Bag of 25 Kg. two

for body earth and one for neutral earth

[C] For Electrical Installation covering

Transformer Neutrals, Lightning arrester

Earthing, A.C.Plant & Sensitive Computer

System(like Automation, SCADA)i.e. independent

Earthing located in other than normal soil i.e.

Soft Rock, Marshy Soil etc..

-Length of Pipe : 3 Mtrs.

-Back filling Compound :2 nos Bags of 25 Kg.

CABLES, WIRE AND TERMINATIONS

DESCRIPTION QUANTITY UNIT RATE AMOUNT

Making trench in soft soil of suitable width of

cm deep for laying cable or locating the fault all

41 over the run and back filling the same and making 1 Mtr. 46.46

as normal ground.

Providing & laying. R.C.C. Hume pipe for cable

to be laid 90 cm. below ground across the road

crossing or on floor with necessary material in

an approved manner and making the ground as per

Providing & laying approved make Double

walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with

43 necessary connecting accessories of same material 10 Mtr. 62.62

at required depth in existing trench for laying of

cable. below ground / road surface for enclosing

cable, (A)50 mm outer dia

Providing and erecting XLPE(IS:7098)(I)-88

ISI armoured cable multistrand / Solid

Copper conductor for 1.1 KV. to be laid on

wall with necessary clamps or in existing trench /

pipe at road crossing or floor of following size of

(A) 4 core 2.5 Sq. mm 30.0 Mtr. 269.67

(B) 4 core 4 Sq. mm 30.0 Mtr. 362.59

Providing and, fixing heavy duty flange type

brass cable gland with rubber ring for PVC

insulated armoured cable complete with out

going tails, insulating tape etc for following size of

(A) 2 to 4 core 2.5 / 4 Sq. mm 4 Ea. 33.33

Solder less crimping type Copper lugs conforming

to IS suitable for cable of following size evenly

crimped with high pressure tool & connected to

46 switchgear terminals with brass/cadmium plated

nut bolts in an approved manner.

Supplying & erecting approved make LAN cable

of following size in existing pipe as per direction [C]

WATER COOLER AND PURIFIER

Providing and erecting water cooler having

storage capacity 80Ltr. & cooling capacity 40 Ltr.per

hour @ an ambient temp of 45˚ C. The outlet

temp. of the water should drop by 15˚ C within a

hour, The water cooler should be comprising

48 of hermetically sealed compressor, fan motor, 1 Ea. 41342.33

condensing unit, water tank surrounded by

evaporating coil, thermostats, relay etc. complete

with necessary inlet & outlet connection. The body of

water cooler will be made from Stainless Steel.

SITC of Water Purifire Eureka Forbs Make AG

PUMP SETS AND STARTERS

Providing & erecting open well type horizontal

mono block pump set with stainless steel body

having following specification

50 (C) 1 H.P. single phase open well motor pump 1 Ea. 9613.18

set suitable for 185 LPM discharge @ 25 mtr.

head, suitable for 32 mm dia. Delivery pipe with

DESCRIPTION QUANTITY UNIT RATE AMOUNT

Supplying and erecting Direct - On - Line Starter

with 18 A. rating contactor and with 3.5 Amp.

18A range directly operated in totally insulated

elegant enclosure for single phase operation up

to 3 HP as per IS 13947 complete erected on P.W.

Block with necessary connection Cat-lll.

Supplying & erecting approved make

Automatic liquid level controller 6A. with sensor

testing as per instruction of Engineer in charge on

site complete with wiring connection with existing

wires , with copper conductor from pump to upper

and lower tank.

TOTAL (C) ELECTRIFICATION WORK

EXECUTIVE ENGINEER

SOUTH WEST ZONE (ATHWA)

SURAT MUNICIPAL CORPORATION

SIGNATURE & SEAL OF CONTRACTOR

NAME & ADDRESS :-