Source level Augmentation of various water supply scheme under JSV section Geherwin from Kaherwin Nallah Satluj River in Tehsil Jhandutta Distt. Bilaspur HP SH Construction of water Sanitation training hall under JSV Sub Division Jhandutta under

Amount

Excavation in foundation and trenches etc. in all kinds of soil such as pick work, jumper work, blasting and chiselling soft or hard rock where blasting is prohibited in all leads and lifts including trimming and dressing of sides, levelling of bed to correct grade stacking the excavated soil clear from the edge of excavation and returning the excavated soil in 15cm layers including consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated soil as directed in all leads and lifts and soring strutting and trimming and dressing where ever required complete in all respect.

Pick jumper work 50% each

Providing and laying cement concrete 1:4:8(1cement:4sand:8 graded crushed stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth including carriage of materials in all leads and lifts.

Providing and laying cement concrete work 1:1½:3(1cement:1½sand: 3 crushed stone aggregate 20mm nominal size & curing complete excluding the cost of form work and reinforcement for reinforced concrete work in following items including carriage of material in all leads & lifts.

Foundation footing, bases of columns etc.

Column, pillars, posts and struts upto floor two level

Suspended floors,roofs,landing shelve and their supports balconies beams,girders bressumers and centilevers upto floor two level

Stair cases (except spiral stair cases) excluding landing but including preparing of the surface and finishing of nosing upto floor two level

Walls (any thickness but not less than 0.10 mts. Thickness) attached pillasters, buttresses plinth, & string courses etc. from top of found level upto floor two level.

Providing form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battens and ballies, height of propping and centring blow supporting floor to ceiling not exceeding 4 mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in following item including carriage of material in all leads & lifts.

Foundation, footings basis of columns etc. and mass concrete.

Flat surface such as soffits of suspended floors, roofs, landings and like floors etc. upto 200mm in thickness

Beams, cantilever, girders and lintels.

Columns, pillars, posts and struts Square, rectangular or polygonal in plan.

Edges of slabs and breaks in floors and walls: Under 20 cm. wide.

Vertical surface such as walls(any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like.

Providing tor steel reinforcement for RCC work including bending binding and placing in position complete upto floor two level including carriage of material in all leads & lifts

Providing and laying 20 cm.thick composit stone masonry with stone facing of chisel dressed stones one linedressed in cement mortar 1:6(1cement :6 sand) and concrete backing with cement concrete 1:3:6 (1 cement: 3 sand: 6graded stone aggregate 20 mm. nominal size) on inner face of walls including centring, shuttering and propping complete up to floor(EXTERIOR WALLS)

Ist class brick work using common burnt clay building bricks in supper structure above plinth upto floor two level in cement mortar 1:6(1cement:6sand) including carriage of materials in all leads & lifts.

1st class Half brick masonry in common burnt clay building bricks in :Cement Mortar 1:4 (1 Cement : 4 Sand) including carriage of materials in all leads & lifts.

Providing wood work of 1st class deodar wood in frames of doors,windows,clerestory,windows and other frames wrought, framed and fixed in position complete including carriage of materials in all leads & lifts.

Providing and fixing panelled glazed or panelled and glazed shutters for doors,windows and clerestory windows i/c bright finished/black enamelled iron butt hings with necessary screws 1st class deodar wood 40mm thick including carriage of material in all leads & lifts.

Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85G. with wire of dia 0.56 mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws 1st class deodar wood 40mm thick including carriage of material in all leads & lifts.

15mm cement plaster in single coat on rough side of brick/stone masonry for interior plastering upto floor two level i/c arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 20mm in girth and finished even and smooth cement mortar 1:6 including carriage of material in all leads & lifts.

20mm Cement plaster in single coat on rough side of interior plastering upto floor two level ncluding arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:4 including carriage of material in all leads & lifts.

6mm cement plaster in single coat on ceiling upto floor two level i/c arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. In cement mortar 1:3 including carriage of material in all leads and lifts

Kota stone slab flooring 20 mm (average) thick base of cement mortor 1:4 (1 cement :4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. including rubbing and polishing complete including carriage of material in all leads & lifts. (13540200) 30 mm thick for porch.

Providing and laying granite stone in flooring 20mm(average)thickness base of cement mortar 3 (1cement:3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete including carriage of material in all leads & lifts. 20mm.thick for stairs and top of kichen shelf.

Providing and fixing 10mm thick antiskid/polished water proof stain and impect resistent heavy duty vetrified tiles Kajaria/Nitco/Johnson/AGL 600x600mm/ 600x1200mm/ 800mmx1200mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of material in all leads & lifts.(as sample approved by the department)

Providing and laying wooden textured ceramic tiles in flooring (20x120mm size)

White glazed tiles 9 mm thick in flooring, treads of steps and landing laid on a bed of 12 mm thick cement mortar 1:3(1 cement :3sand) finished with flush pointing in white cement complete in all respect including carriage of material in all leads & lifts.(size of tile=30x45cms

Providing and laying 10mm thick antickid floor tiles in flooring of size 300x300 mm/300x600mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc..

Providing and fixing plaster of paris(POP.) false ceiling 12 mm thick plaster, fixed over GI sections and wire mesh,:L-connectors, rawl plugs, complete as per Arhitectural drawings complete

Providing and laying heavy duty precast cement concrete inter locking paver blocks vibro compacted upto M-50 grade i/c border or kurb block grey or coloured over sub-base of concrete with 25mm thick average thickness of cement mortar 1:4 (1 cement : 4 sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curing rubbing & polishing complete (Sub base concrete floor to be paid for 60mm thick inter locking blocks complete in all respect including carriage of material in all leads & lifts .

Polshing two coats with PU( polyurepthang) sirca/ asin make polish of required sade on new wood and wood bashed surfaces to give an event surface including cleaning the surface of all dirt, dust and sand prepared soomth and including a coat of wood fillre complete in all respect including carrigae of material in cluding all leads and lifts

Painting two coats(excluding primimg coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering & stoping complete in all respect including carriage of material in all leads & lifts other than white enamel paint

Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including t horoughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface complete in all respect including carriage of material in all leads & lifts

Applying one coat for wood preservetive on previously treated wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matter,sand papering and knotting complete in all respect including carriage of material in all leads & lifts wood filler transparent)

Applying spirit or oil stains any colour on new wood and wood based surfaces to give an even surfaces including cleaning the surface of all dirt , dust and sand papering so as to produce a smooth dry and matt surface including stopping & knotting.

Filling in plinth with sand under floors including watering ramming consolidating and dressing complete under flooring complete in all respect including carriage of material in all leads & lifts.

Providing and fixing 19mm thick water proof commercial board in shelves/box for cup board (Bhuttan make)with butt joints & fixing with nails & screws etc complete in all respect including carriage of material in all leads & lifts.(centuary/virgo/green make)

Providing and fixing 19mm thick water proof commercial board in shutter of cup board (Bhuttan make)with butt joints & fixing with nails & screws etc complete in all respect including carriage of material in all leads & lifts. Centuary/virgo/green make)

Providing and fixing 4mm thick burl ply of standard quality and of approved shade & design wall lining i/c fixing with approved adhesive, butt jointing and nails & screws complete (Base frame work to be measured & paid for separately) complete in all respect including carriage of material in all leads & lifts.

Providing and fixing 1.00mm thick coloured or plain lamination sheet (sunmica) on oards/ ply wood sheets with approved adhesive and nails etc complete in all respect including carriage of material in all leads & lifts.

Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting,fixing in position and applying a priming coat of red lead paint. In MS hollow square/rectangluer pipes (tata make)beams joists channels ,angles, tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like complete in all respect including carriage of material in all leads and lifts

Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees including carriage of material in all leads and lifts as required as per the direction of Engineer-in-charge.

Providing and fixing ridges or hips 60cm overall with 0.60mm thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories including carriage of material in all leads and lifts as required as per the direction of Engineer in Charges .

Providing and fixing stair case/ balcony railing of stainless steel grade 304 in straight length with horizontal & vertical members of standard size/height with in all leads and lifts as per the direction of Engineer-In-Charge

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete in all respect including carriage of material in all leads & lifts .

Providing under layer for plinth protection of 75mm thick (unconsolidated) bed of dry brick/ stone aggregate 40 mm nominal size, well rammed and with fine sand, including preparation of ground consolidated and grouted.

Painting two costs (excluding priming coat) on new steel and other metal surfaces eith enamel paint brushin to give an even shade including cleaning the surface of all dirt,dust and other foregin matters complete including carriage of material in all leads & lifts Enamel white paint

Providing and laying cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size ) curing complete excluding cost of form work in suspended roofs in all leads and lifts and as per the direction of the Engineer-in-Charge.

Providing & Fixing of Man hole cover (size 680X680) with M.S sheet 2.00 mm thick with hinges on MS. angle iron frame 35x35x3mm supporting with 40x5mm MS flat with base frame 40x40x5mm duly welded and fixed in RCC slab with anchor bolt 12mmx150mm i/c cost of welding charges,carriage fixing and applying priming coat and locking arrangement complete in all respect as per entired satisfiction of engineer in charge.

Providing and laying cement concrete 1:3:6 (1 cement:3 sand:6 graded crushed stone aggregate and 40mm nominal size) and curing complete excluding the cost of shuttering in retaining walls/breast walls, in all leads and lifts.

Stone/boulder filling behind retaining wall complete in all respect within all leads and lifts and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing PVC pipe of ISI mark of 100 mm diameter for wheep holes as per direction and to the entire satisfaction of the Engineer in charge.

Jungle clearing (Bush Cutting) including uprooting of rank Vegetation, grass , brush wood, trees and sapling of girth upto 30 cm measured at a height of 1 metre above ground and removal of rubbish upto a distance of 20 metres outside the periphery of the area cleared

Filling with earth work procured with in 5 Km radius in low laying area with in all leads and lifts as per their entire satisfaction of Engineer-In-Charge.

Provision for structural design & drawing ( after asertaining the safe bearing capacity of the soil ) the architectural drawings, structural design and drawing of getting approved from the competent authority.

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. Group-C

Wiring for light plug with 2x1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Supplying & fixing of G.I. modular boxes of following sizes along with modular base and cover plate for modular switches in recess as required:-

4 modules(140mmx78mmx50mm)

6 modules(205mmx78mmx50mm)

8 modules (120mmx135mmx60mm)

12 modules (205mmx135mmx60mm)

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.

2x1.5 Sq. mm.

2x2.5 Sq. mm.

2x4.0 Sq. mm.

Wiring for circuit / sub-main with 4x6 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.6 Sq.mm. (4x6+2x6) HRFRLS/PVC insulated single core copper conductor cable for earthing wire from MCB box to main pannel board.

Wiring for circuit / sub-main with 4x10 Sq. mm. PVC insulatedheat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.10 Sq.mm. (4x10+2x10) HRFRLS/PVC insulated single core copper conductor cable for earthing three phase wiring in main pannel board for busbar.

Providing and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required.

S.P. 5/ 6 Amps one way Modular switch.

5 pin, 5/ 6 Amps Modular socket outlet.

Bell push, Modular.

Providing and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required.

S.P. 15/ 16 Amps one way Modular switch

6 pin,15/16 Amps Modular socket outlet.

Providing and fixing TV. Socket outlet, modular rating switch /socket in the existing switch box / cover plate including connections etc. as required.

Providing and fixing Telephone socket outlet, modular rating switch /socket in the existing switch box / cover plate including connections etc. as required.

Providing and fixing ceiling rose on the existing junction box /wooden block including connections etc. as required.

Providing and fixing of Double door-12 way single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wireset, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnec- tions, phosphatized and powder painted, including earthing etc. as required.

Providing and fixing 63 Amps. Cat-A rating, four pole (three phase & neutral) 415 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Providing and fixing sheet metal bus-bar chamber suitable for 200 Amp. 415 volts capacity with 4 No. copper strip bus-bars each of length 450mm & cross-sectional area(25.4mmx4.75mm), enclosure made from 1.6 mm thick M.S. sheet having overall dimensions (530mmx450mmx 150mm) nominal with all accessories including connections, earthing the body etc. as required.

Providing and fixing TP&N switch disconnector fuse unit cubical type, 415/500 volts with 3 No. HBC/HRC fuses, in sheet steel enclosure including drilling holes on the board, connections, earthing the body etc. as required. 100 Amp. Category-A

Providing and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of Single pole & neutral. Cat-B in the existing MCB DB complete with connections etc. as required:-

Providing and erection of wall mounted metal boards for switch gear mounting of suitable size, with permissible variation in size of plus minus 5mm, welded frame work made of M.S. angle iron 35 mm x 35 mm x 6 mm thick duly welded complete with 2.80mm thick M.S. sheet fixed with hinges as open able front, complete with locking arrangement including painting and bonding to the existing earth as required:-

Providing and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of Double pole. Cat-B in the existing MCB DB complete with connections etc. as required:-

Providing and fixing 40 Amps. Cat-B rating, four pole (three phase & neutral) 415 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Providing and fixing 20 Amps, 240 volts, SPN industrial socket outlet, 2-pole & earth, metal enclosed plug top, sheet steel enclosure, suitable to accommodate a 20 Amp SPN-MCB/DP on surface or in recess, with chained metal cover for the socket outlet, complete with connections, testing and commissioning etc. as required.

Providing and fixing TP&N switch disconnector fuse unit panel mounting, 415/500 volts with 3 No. HBC/HRC fuses, open execution, including drilling holes in the cubical, making connections, etc. as required. 200 Amp. Category-A

Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required.

Providing and fixing of lightning conductor finial, made of 25 mm dia. 300 mm long copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate including holes etc. complete as required.

Providing and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required ( for vertical run)

Providing and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required ( for horizontal run)

Providing and fixing M.V.danger notice plate of 200 mm x 150 mm made of mild steel at least 2 mm thick, and vitreous enameled white on both sides and with inscription in signal red color on front side as required.

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, rmoured/ XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation sand cushioning, protective covering and refilling the trench etc. of the Armoured cable 4 sq. mm (twin core) for Yard lights.

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Nonreturn valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. 25 Liter capacity water heater (Cat-A)

Providing, Installation, testing and commissioning of ceiling fan of Bajaj/havells/usha make with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. Ceiling Fan 1400 mm sweep, Category-A

Providing and fixing stepped type Modular fan regulator on the existing modular box including making connections etc. as required.

Providing and installation of Exhaust Fan of Bajaj/havells/usha make Light duty, (Domestic) 225 mm sweep in the existing opening, including taking the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc.

Providing and fixing 1x36 watt LED (category-A) surface mounting fixture Syska/Havells/Bajaj make.

Providing and fixing 6 watt recessed down lights round shape for false ceiling complete.

Providing and fixing of fancy wall bracket containing thread type LED lamp holder (s) of all sizes and shapes, complete with all accessories but excluding LED lamp including making connections, testing etc. as required. Fixed type wall bracket 150 dia, single lamp.(Category-A)

Providing, Installation, testing and commissioning of prewired flourecent tube fitting 1x20W LED coplete in all respect.

Providing and fixing mirror light 60 cms long 6watt LED fixture.

Providing and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required

Providing and fixing LED BULBS 9 watt.

Providing and drawing co-axial TV cable,RG-6 grade,0.7mm (75 Ohms) copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface / recessed, steel / PVC conduit as required.

Providing and fixing bakelite batten/angle holder including connections etc. as required.

Providing and fixing of integral LED Post Top Lantern of following capacity, cast aluminium spigot, spun aluminium canopy, opal acrylic diffuser, complete with all accessories but excluding CFL lamp including making connections, testing etc. as required. Gate post top lantern - LED 22 watt.

Providing and fixing of integral LED boundary wall lights fixed over G.I. Pipe polls 1.20 mtrs ht 50mm dia. 9 watt LED lamp with 200 mm dia globe made of acrylic sheet complete.

Providing and fixing of INTERCOME exchange of reputed brand having 12 connections with phone sets and wiring complete.

Providing and fixing of split type air conditioner Blue star/LG/ Onida Whirlpool/Lloyd/ Samsang make 2 tonn having five stars features auto clean filter four way swing all copper pipes including making provision of draining of back moisture water through M S pipe 20mm dia electronic voltage stabilizer, cutting holes for conduits in wall, unit bracket set fixed on outer wall complete as required

1 Tonne capacity

2 Tonne capacity

Providing and fixing of LED TV 32" Sony/Samsung/LG make as required as per the direction of Engineer-in-charge.

Providing and fixing of inverter with dual batteries Luminous/Su-kam/Microtech make as per the direction of Engineer-in-charge..

Providing and fixing of water purifier with container 25 Ltr capacity (Aquaguard Model MAGNA HD RO+UV) as per the direction of Engineer-in-charge.

Providing and fixing of washing machine of Lloyd/LG/Whirlpool make semi automatic double container 8.5 Kg. capacity as per the direction of Engineer-in-charge.

Providing and fixing of microwave oven of IFB/Samsung make 17 ltr capacity as per the direction of Engineer-in-charge.

Providing and fixing of refrigerator of LG/Whirlpool/Samsung make 320 ltr capacity as per the direction of Engineer-in-charge.

Providing and fixing high pressure spigot and socket waste ventilating pipe of following daimeter i/c entire carriage of material within all leads and lifts.

75mm dia

100mm dia

Providing and fixing PVC plain bend of following diameter i/c entire carriage of material within all leads and lifts.

75mm dia

100mm dia

Providing and fixing PVC door bend of following diameter i/c entire carriage of material within all leads and lifts.

75mm dia

100mm dia

Providing and fixing PVC collar/ socket of following diameter i/c entire carriage of material within all leads and lifts.

75mm dia

100mm dia

Providing and fixing PVC Single equal branch of following diameter i/c entire carriage of material within all leads and lifts.

75mm dia

100mm dia

Providing and fixing PVC Single equal branch with eval access of following diameter i/c entire carriage of material within all leads and lifts.

75mm dia

100mm dia

Providing and fixing PVC Floor traps 110x75mm i/c entire carriage of material within all leads and lifts.

Providing and fixing viterous China wash down water closet (European Type WC pan) with intergral “P”or”S” trap including jointing the trap with soil pipe in cement mortar 1:1 (1cement: 1 sand) including entire carriage of material within all leads and lifts.

Single piece WC i/c seat cover ,wall distance 300mm Jaguar/Cera/Hindware make.

Providing and fixing vitreous china wash basin with single hole for pillar tap with CI or MS brackets painted white i/c cutting holes & making good the same but excluding fitting i/c entire carriage of material within all leads and lifts. Cera/Hindware/Jaguar make Concord, 630x450mm size.

Providing and fixing vitreous china pedestal for wash basin complete recessed at the back for the reception of pipes and fitting i/c entire carriage of material within all leads and lifts.

Providing and fixing of MI union for wash basin 32mm dia i/c carriage of material within all leads and lifts.

Providing and fixing 32mm dia PVC waste pipes for wash basin i/c brass check nut i/c entire carriage of material within all leads and lifts.

Providing and fixing 900mm x 600mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P. brass screws and washer including carriage of materials within all leads and lifts.

Providing and fixing C.P. brass towel rail complete with C.P.brass brackets fixed to wooden plugs with C.P. brass screws including carriage of materials within all leads and lifts 600 x 20mm. Jaguar make

Providing and fixing 600x120mm glass shelf i/c entire carriage of material within all leads and lifts.

Providing and fixing CP toilet paper holder i/c entire carriage of material within all leads and lifts.

Providing and fixing CP brass soap dish i/c entire carriage of material within all leads and lifts.

Providing and fixing Tooth brush and tumbler holder i/c entire carriage of material within all leads and lifts.

Providing and fixing CP brass shower 300mm dia,with 60 cms long rod, i/c entire carriage of material within all leads and lifts.

Providing and fixing brass bib tap long nose 15 mm dia (Heavy duty) i/c entire carriage of material within all leads and lifts.

Providing and fixing CP brass wall mixture for bathing area i/c entire carriage of material within all leads and lifts.

Providing and fixing brass angle valve 15 mm dia without nut and pipe i/c entire carriage of material within all leads and lifts.

Providing and fixing CP concealed stop cock 15 mm dia without nut and pipe i/c entire carriage of material within all leads and lifts.

Providing and fixing single hole single lever wash basin mixture i/c entire carriage of material within all leads and lifts.

Providing and fixing PVC connection 15mm dia i/c entire carriage of material within all leads and lifts.

Providing and fixing 100mm dia, C.P. brass grating including carriage of material within all leads and lifts.

Providing and fixing health facut (hand shower) fixed for WC seat i/c entire carriage of material within all leads and lifts.

Providing and fixing CP towel rail i/c entire carriage of material within all leads and lifts.

Providing and fixing CP towel rack 600x250mm for VIP toilet i/c entire carriage of material within all leads and lifts.

Providing and fixing wall to ceiling and floor galvanised mild steel tubes light grade), tube fittings and clamps i/c making good wall ceiling & floor of following diameter i/c entire carriage of material within all leads and lifts

15mm dia

20mm dia(ALL INTERNAL FITTING OF TOILETS)

25mm dia (from tank to toilet etc.)

Providing & fixing Brass full way wheel valve i/c entire carriage of material within all leads & lifts

15mm dia

20mm dia

25mm dia

Providing and fixing 115x50x25cms size double bowl of approved make stainless steel kitchen sink i/c entire carriage of material within all leads and lifts

Providing and fixing 1000 ltrs. Three layer sintex make water storage reservoir with top lid and making connection complete in all respect including all leads and lefts.

Constructing manhole with RCC top slab in 1:2:4 mix ( 1 cement :2 sand:4 graded stone aggregate 20 mm nominal size) foundation concrete 1:4:8 ( 1cement:4sand :8graded stone aggregate 20 mm nominal size),inside plastering 15 mm thick with cement mortor 1:3 (1cement:3sand),finished with a floating coat of neat cement & making channels in cement concrete 1:2:4 (1cement:2 sand:4 graded stone aggregate 20mm nominal size) finished smooth complete i/c curing &testing. (i) inside size 1200 x 900 x 1000 mm deep i/c c.i. cover with frame (m. duty) with single pattern 455 x 610 mm internal dimensions (total wt.of cover & frame to be not less than 38 kg) 23 cms. thick brick masonry walls using 2nd class brick in cm 1:3 (icement : 3 sand)

Providing & fixing stone ware gully trap grade 'A' complete with CI grating,B/Masonry chamber in cement mortor 1:5 & water tight CI cover with frame of 300 mm x 300 mm size (inside) .The wt.of cover to be not less than 4.53 Kg & frame to be not less 2.72 Kg. (Square mouth traps 100 x 100 mm size)

Double bed box with 2 side table of 1st class indian teak wood fully polished complete in all respect including all leads & lift as per the direction of Engineer-in-charge.

Dinning table set 7'x3'-6" of 1st class indian teak wood with marble top and 8 chair of 1st class teak wood fully polished for dining hall complete in all respect including all leads & lift as per the direction of Engineer-in-charge.

Side cross sofa set seven seater(7) for waiting room/Meeting hall of 1st class indian teak wood, woolan cushion and fully polished including all leads & lift as per the direction of Engineer-in-charge.

Centre table(4 ft X 2 ft) of 1st class indian teak wood with Marble Top fully polished for sofa set at waiting room & Meeting Hall complete in all respect including all leads & lift as per the direction of Engineer-in-charge.

Bed room chair with cushion of 1st class indian teak wood including all leads & lift as per the direction of Engineer-in-charge.

chair with arms made of 1st class indian teak wood fully polished including all leads & lift as per the direction of Engineer-in-charge.

Providing of mattress having size of 75x35, 5½" thick of sleepwell make as per the direction of Engineer-in-charge.

Providing of mattresss having size 75x35, 4'' thick of sleepwell makeas per the direction of Engineer-in-charge.

Providing of durable rigid plastic mid back with arm chair with good quality material of Nilkamal/Cello make with standard dimension (H 34 x W 22 x D 24 inches ) Seating Height of 17inch complete in all respect to the entire satisfaction of the Engineer-In-Charge.

Providing of Bed sheet VIP satin strip as per the direction of Engineer-in-charge.

Providing of BD double bed sheet cotton comforeter as per the direction of Engineer-in-charge.

Providing of Pillow simple recwall as per the direction of Engineer-in-charge.

Providing of Cusion fillter 24x24 as per the direction of Engineer-in-charge.

Providing of Towel ultrex 75x150 VIP as per the direction of Engineer-in-charge.

Providing of Towel ultrex 40x60 VIP as per the direction of Engineer-in-charge.

Providing of Towel satino 75x150 as per the direction of Engineer-in-charge.

Providing of Towel satino 40x60 as per the direction of Engineer-in-charge.

Providing of Bed cover white strip as per the direction of Engineer-in-charge.

Providing of Passum quilt tencil double 350 GSM as per the direction of Engineer-in-charge.

Providing of Quilt cover duble satin strips as per the direction of Engineer-in-charge.

Providing of Passum quilt tencil Single white 350 GSM as per the direction of Engineer-in-charge.

Providing of Quilt cover sigle white strip mark as per the direction of Engineer-in-charge.

Providing of Saprose mat pose small as per the direction of Engineer-in-charge.

Providing of Saprose mat pose big as per the direction of Engineer-in-charge.

Providing of Saprose runner pose R as per the direction of Engineer-in-charge.

Providing of Blanket single as per the direction of Engineer-in-charge.

Providing of Mora blanket double as per the direction of Engineer-in-charge.

Providing of Carpet 4x6 as per the direction of Engineer-in-charge.

Providing of Curtains for ground floor as per the direction of Engineer-in-charge.

Providing of Curtains for 1st floor as per the direction of Engineer-in-charge.

Providing of Pressure cooker 10 ltr as per the direction of Engineer-in-charge.

Providing of Pressure cooker 5 ltr as per the direction of Engineer-in-charge.

Providing of Pressure cooker 3 ltr as per the direction of Engineer-in-charge.

Providing of Aluminium Pans large 50 ltr(Stainless Steel) as per the direction of Engineer-in-charge.

Providing of Aluminium Pans Mediam(Stainless Steel)as per the direction of Engineer-in-charge.

Providing of Aluminium Tea pans (Stainless Steel) as per the direction of Engineer-in-charge.

Providing of Sevice Tray 45X30 cms as per the direction of Engineer-in-charge.

Providing of Spoons(Stainless Steel) as per the direction of Engineer-in-charge.

Providing of Sevice Spoons (Stainless Steel)as per the direction of Engineer-in-charge.

Providing of Steel Tumbler as per the direction of Engineer-in-charge.

Providing of Karchi Medium as per the direction of Engineer-in-charge.

Providing of karchi Small as per the direction of Engineer-in-charge.

Providing of karchi Large as per the direction of Engineer-in-charge.

Providing of Knives as per the direction of Engineer-in-charge.

Providing of Full Rice Plate(Malmoware) as per the direction of Engineer-in-charge.

Providing of Quarter Plates as per the direction of Engineer-in-charge.

Providing of Service bowls as per the direction of Engineer-in-charge.

Providing of Chakla as per the direction of Engineer-in-charge.

Providing of Belna as per the direction of Engineer-in-charge.

Providing of Tava (Non Stick) as per the direction of Engineer-in-charge.

Providing of Emty Plastic Jars as per the direction of Engineer-in-charge.

Providing of Grain Storage Basket, Drum 20 ltrs (Stainless Steel) as per the direction of Engineer-in-charge.

Providing of Stainless Steel Full Plates as per the direction of Engineer-in-charge.

Providing of Fry Pan as per the direction of Engineer-in-charge.

Providing of Karahi as per the direction of Engineer-in-charge.

Providing of Cello 45pscs dinner set as per the direction of Engineer-in-charge.

Providing of Cup saucer white small as per the direction of Engineer-in-charge.

Providing of Mug white smart CTN of 36 Pcs as per the direction of Engineer-in-charge.

Providing of Borosil Glass large set of 6 as per the direction of Engineer-in-charge.

Providing of Glass noraml CTN of 48 pcs as per the direction of Engineer-in-charge.

Providing of White full acrylic as per the direction of Engineer-in-charge.

Providing of White katory acrylic as per the direction of Engineer-in-charge.

Providing of Bowl with LID acrylic as per the direction of Engineer-in-charge.

Providing of Rice plate acrylic as per the direction of Engineer-in-charge.

Providing of Malamine tray extra large as per the direction of Engineer-in-charge.

Providing of Freelance Tray black as per the direction of Engineer-in-charge.

Providing of Mlamine tray handle tray large as per the direction of Engineer-in-charge.

Providing of Botle Glass black steel knob as per the direction of Engineer-in-charge.

Providing of Bottle jug luminarc as per the direction of Engineer-in-charge.

Providing of Milton jug as per the direction of Engineer-in-charge.

Providing of Borosil mix bowl as per the direction of Engineer-in-charge.

Providing of Ice tray as per the direction of Engineer-in-charge.

Providing of Fridge bottle as per the direction of Engineer-in-charge.

Providing of Pedal bin RB as per the direction of Engineer-in-charge.

Providing of Philips dry iron as per the direction of Engineer-in-charge.

Providing of Grinder Mixer heavy duty of Bajaj make as per the direction of Engineer-in-charge.

Providing of Dustbin plastic as per the direction of Engineer-in-charge.

Providing of Dustbin swing as per the direction of Engineer-in-charge.

Providing of Bucket 25 ltr flora square as per the direction of Engineer-in-charge.

Providing of Mug flora square as per the direction of Engineer-in-charge.

Providing of Stool floora square as per the direction of Engineer-in-charge.

Providing of Bucket 25 ltr folra round as per the direction of Engineer-in-charge.

Providing of Mug flora round as per the direction of Engineer-in-charge.

Providing of Stool flora round as per the direction of Engineer-in-charge.

Providing of Cup Saucer Dankatua as per the direction of Engineer-in-charge.

Providing of Cutlury set 72 pcs royal windser as per the direction of Engineer-in-charge.

Providing of Table mat as per the direction of Engineer-in-charge.

Providing of Induction Chulah as per the direction of Engineer-in-charge.

Providing of Four Burner Gas Chulah Bajaj Make as per the direction of Engineer-in-charge.

Gopal Mahajan

R.G. INDUSTRIES

MS Kamal Dev Sharma