Tourist Facility Devlopment Near Hafeshwar Mahadev Temple at Chhota Udaipur

Name of Work: Tourist Facility Development Near Hafeshwar Mahadev Temple at Chhota Udaipur

Sr. No. Total Qty Description Unit Rate in Figure Rate in Words

Excavation for foundation upto 1.5 m depth including

Rupees Two Hundred

sorting out and stacking of useful materials and

1 4,663.00 Cmt 284.69 Eighty Four And Paise

disposing off the excavated stuff upto 50 Meter lead.

Sixty Nine Only

(C) Hard Murrum

Excavation for foundation for depth from 1.5 m to

Rupees Two Hundred

m including sorting out and stacking of useful

2 86.00 Cmt 294.05 Ninety Four And Paise

materials and disposing off the excavated stuff upto

Meter lead.(C) Hard Murrum

Excavation for foundation for depth from 3.0 m to

Rupees Three Hundred

m including sorting out and stacking of useful

3 127.00 Cmt 307.16 Seven And Paise Sixteen

materials and disposing of the excavated stuff upto

Meter lead. (C) Hard Murrum

Box cutting the road surface to proper slope and

Rupees One Hundred

camber for making a base for road work including

4 3,356.00 Cmt 112.02 Twelve And Paise Two

removing the excavated stuff and depositing on the

road side slope as directed upto 50Mt. lead.

Rolling and consolidation of soling including filling in Rupees Twenty Two

5 2,596.00 depression which occur during the process, with smt 22.75 And Paise Seventy Five

power roler 8 tonne to 12 tonne. Only

Boring, providing and installation bored cast-in-situ

reinforced cement concrete piles of grade M-25 of

specified diameter and length below the pile cap, to

carry a safe working load not less than specified,

excluding the cost of steel reinforcement but including

the cost of boring with bentonite solution and

Rupees Two Thousand

temporary casing of appropriate length for setting out

Nine Hundred Eighteen

6 350.00 and removal of same and the length of the pile to be Mtr. 2,918.34

And Paise Thirty Four

embedded in the pile cap etc. by percussion drilling

using Direct mud circulation (DMC) or Bailer and

chisel technique by tripod and mechanical Winch

Machine all complete, including removal of excavated

earth with all its lifts and leads (length of pile for

payment shall be measured up to bottom of pile cap).):

1) 450 mm dia piles

Filling available excavated earth (excluding hard rock)

Rupees One Hundred

in trenches. plinth, sides of foundations etc. in layers

7 5,278.00 Cmt 137.47 Thirty Seven And Paise

not exceeding 20 cm. in depth consolidating each

Forty Seven Only

disposited layer by ramming and watering.

Filling in foundation and plinth with murrum or Rupees Three Hundred

8 5,999.00 selected soil in layers of 20cm. thickness including Cmt 304.60 Four And Paise Sixty

watering, ramming and consolidating etc. complete. Only

Filling in plinth with sand under floors including Rupees Four Hundred

9 100.00 watering ramming, consolidating and dressing Cmt 489.28 Eighty Nine And Paise

complete Twenty Eight Only

Providing and laying controlled cement concrete

Rupees Three Thousand

M.150 for curing complete including cost of formwork

Eight Hundred Ninety

10 902.00 and reinforcement for reinforced concrete work in (A) Cmt 3,898.54

Eight And Paise Fifty

Foundations, footings,Base of columns and Mass

Providing, laying controlled cement concrete M 250 Rupees Four Thousand

and curing complete including the cost of form work Five Hundred Thirteen

but excluding reinforcement for reinforced concrete And Paise Sixty Nine

work in: Up to Plinth Level.(A) Footing Only

Providing, laying controlled cement concrete M

and curing complete including the cost of form work

Rupees Seven Thousand

(rates for centering, shuttering, formwork staging

12 74.00 Cmt 7,004.35 Four And Paise Thirty

scaffolding for considering up to 4.50m height) but

excluding reinforcement for reinforced concrete work

in: (C) Plinth Beam

SCHEDULE- B Page

Sr. No. Total Qty Description Unit Rate in Figure Rate in Words

Providing, laying controlled cement concrete M

and curing complete including the cost of form work Rupees Seven Thousand

(rates for centering, shuttering, formwork staging Nine Hundred Thirty

scaffolding for considering up to 4.50m height) but Three And Paise Fifty

excluding reinforcement for reinforced concrete work Five Only

in: (B) Column all floor

Providing, laying controlled cement concrete M

and curing complete including the cost of form work Rupees Seven Thousand

(rates for centering, shuttering, formwork staging Nine Hundred

scaffolding for considering up to 4.50m height) but Seventeen And Paise

excluding reinforcement for reinforced concrete work Thirty Nine Only

in: (D) RCC Wall all floor

Providing and laying controlled cement concrete M- Rupees Six Thousand

250 and curing complete including the cost of form Three Hundred Forty

work but excluding reinforcement for reinforced Nine And Paise Eighty

concrete work in: (D) Lintel/ coping all floor Seven Only

Providing and laying controlled cement concrete M-

Rupees Six Thousand Six

250 and curing complete including the cost of form

16 7.00 Cmt 6,655.90 Hundred Fifty Five And

work but excluding reinforcement for reinforced

Paise Ninety Only

concrete work in: (D) Wheathershed all floor

Providing, laying controlled cement concrete M

and curing complete including the cost of form work

Rupees Six Thousand

(rates for centering, shuttering, formwork staging

17 58.00 Cmt 6,419.56 Four Hundred Nineteen

scaffolding for considering up to 4.50m height) but

And Paise Fifty Six Only

excluding reinforcement for reinforced concrete work

in: (E) Floor Beam all floor

Providing, laying controlled cement concrete M

and curing complete including the cost of form work

Rupees Six Thousand Six

(rates for centering, shuttering, formwork staging

18 164.00 Cmt 6,658.93 Hundred Fifty Eight And

scaffolding for considering up to 4.50m height) but

Paise Ninety Three Only

excluding reinforcement for reinforced concrete work

in: (E) Slab all floor

Providing Corrosion Ressitance Steel TMT Bars FE

Rupees Eighty One And

19 77,135.00 500D reinforcement for R.C.C. work including bending, Kg. 81.45

Paise Forty Five Only

binding and placing in position complete

Applying general insecticide pest control treatment to

floors, cupboards etc including labour materials etc.

complete. Using Imidacloprid 30.5 SCas Per IS

Rupees Forty Nine And

20 640.00 part-II (0.075% concentration by mass) is Smt 49.25

Paise Twenty Five Only

recommended 10.5ml chemical diluted with 5 liters of

water application 0.5 litre chemical/Sqm of surface is

recommended as per I.S.

Designing, providing and constructing GABIONS with

mechanically woven double twisted hexagonal wire

mesh of 4 mm dia. Wire zinc plus 0.5 mm thick PVC

coated wire mesh with gabion baskets of size 1 mt x

mt x 1mt/ required size as per design filled with 30 to Rupees Two Thousand

21 1,994.00 50 kg trap rubble stone with mesh size of 10 x 12 cm Cmt 2,305.83 Three Hundred Five And

including packing, interlocking of stones, fusing top of Paise Eighty Three Only

gabions, tying each other and laying to required line,

level and slope with all leads & lift including

foundation and body of gabions, lacing and installation

etc. completed as directed.

Uncoursed Rubble Masonry with hard stone of

Rupees Two Thousand

approved quality in foundations and plinth in Cement

22 706.00 Cmt 2,635.14 Six Hundred Thirty Five

Mortar 1:5 (1 cement : 5-coarse sand including

And Paise Fourteen Only

levelling up etc. complete

Pointing on Uncoursed stone masonry with cement Rupees One Hundred

23 938.00 mortar 1:3 (1-cement : 3-coarse sand) (A) Flush SMT 111.16 Eleven And Paise

pointing Sixteen Only

SCHEDULE- B Page

Sr. No. Total Qty Description Unit Rate in Figure Rate in Words

Coursed rubble masonry with stone of approved Rupees Three Thousand

quality in foundations and plinth in Cement Mortar 1:3 Eight Hundred Forty

(1-Cement: 3-coarse sand) etc. complete. (more than Three And Paise Thirty

10 ton) all floor. Two Only

Masonary work using Aerated light weight concrete

Rupees Four Thousand

block having crushing strength not less than

Eight Hundred Eighty

25 310.00 kg/sqcm for super structure above plinth level upto cmt 4,888.43

Eight And Paise Forty

floor two level in cement mortar 1:5 ( 1 cement : 5 fine

sand ) complete as per Technical Specification all floor

Providing & laying 15 mm. thick mala cement plaster

in single coat on fair side of brick concrete walls for Rupees Two Hundred

26 1,621.00 interior plastering and finished even & smooth plaster Smt 231.38 Thirty One And Paise

with floating coat of neat cement slurry. (ii) Cement Thirty Eight Only

mortar 1:4 (1 cement: 4 sand) all floor

10mm th cement plaster in single coat on fair side of

brick/ concrete wall for interior plastering upto floor Rupees Two Hundred

27 331.00 two level finished even and smooth in C M 1:4 (1 Smt 213.94 Thirteen And Paise

cement 4 coarse sand) including floating coat of neat Ninety Four Only

cement including finishing etc complete. all floor

Providing 20 mm thick double coat mala cement

plaster on interior brick/ concrete work for plastering

comprising of base coat of 12 mm thick cement plaster Rupees Two Hundred

28 3,101.00 in cement mortar (1 Cement: 4 coarse sand) in rough Smt 290.71 Ninety And Paise

finishing and 8 mm thick top coat of cement mortar Seventy One Only

1:2 (1 Cement: 2 Coarse sand) finished with trovel

including scaffolding curing etc. complete.

Providing 20mm thick water proof cement plaster

using water proofing powder 1Kg/ 1bag of cement for

Rupees Two Hundred

all floors on brick/ concrete wall work using water

29 246.00 Smt 291.89 Ninety One And Paise

proofing materials in CM 1:4 (1 cement 4 coasrse

Eighty Nine Only

sand) including finishing with a flooting coat of neat

cement slurry etc complete for all floor. as directed.

Providing and applying two coats of Birla or Asian

acrylic lapy (putty) & two coats of primer of approved

brand and manufacture on new wall surface to give an Rupees Forty And Paise

even shade including thoroughly brushing the surface Fifty Nine Only

free from mortar dropping and other foreign matter

and sand papered smooth.

Wall painting (three coats) with plastic emulsion paint

of approved brand and manufacture on undecorated Rupees One Hundred

31 3,109.00 wall surface to give an even shade including throughly Smt 128.38 Twenty Eight And Paise

brushing the surface free from mortar droppings and Thirty Eight Only

other foreign matter and sand papered smooth.

Providing and applying 2mm thick Texture Plaster

Terre Plaette (Specturm, Coral or equivalent)

incoprating fine fillments made of polymer and

Rupees Four Hundred

aggergating natural stone powder with making

32 927.00 Smt 453.49 Fifty Three And Paise

grooves on base coat of 20 mm thick smooth mala

Forty Nine Only

plaster (which paid seperately) etc. complete.Colour

and shade as approved by Architect/ Engineer in

charge for at all floor, all height.

SCHEDULE- B Page

Sr. No. Total Qty Description Unit Rate in Figure Rate in Words

Finishing wall with weather proof low velocity ultima

exterior emulsion paint on wall surface (two coats) to Rupees One Hundred

33 2,951.00 give an required shape even shade after thoroughly Smt 122.14 Twenty Two And Paise

brushing the surface to remove all dirt, and remains of Fourteen Only

loose powdered materials.etc complete for all height

Provding and fixing M.S. plain grills of required

pattern with M.S. flats at required spacings & frame Rupees One Hundred

34 517.00 around, sequare or round bars with round headed Kg. 110.31 Ten And Paise Thirty

bolts and nuts or by screws including applying a One Only

priming coat of red lead paint two coat of Oil paint .

Steel work, welded in built up sections framed work

including cutting, hoisting, fixing in position and

applying a priming coat of red lead paint. with one

coat primer & two coat oil paint (A)In beams and Rupees One Hundred

35 52,202.80 joists, channels angles Tees, flats, with connecting Kg. 105.04 Five And Paise Four

plates or angle cleats as in main and cross beams. Hip Only

and jack rafters, purlins conneted to common rafters

and the like as per the structural designs and

directions of Engineer in charge

Pro. And fixing single layer water proof gypsum board

12.5 mm thick sections using water proof board of size

1220 mm x 1830 mm x 8.0 mm suspended by GI

suspender channel of size 25 mm x 3 mm with

intermediate channel og size 18 mm x 40 mm x

mm at 1220 mm center to center ceiling section of size Rupees Six Hundred Six

36 1,142.00 40 mm x 35 mm x 0.55 mm at 457 mm c/ c and Smt 606.95 And Paise Ninety Five

perimeter channel A of size 20 mm x 27 mm x 30 mm x Only

0.5 mm at edges & drops incl.paper tap sand sofit

cleat, anchor fastener, scoch bolt connecting cleat,

joining compound top coat on ceiling incl.making

necy.opening for light fitting, diffuser etc. comp. as per

detail drawing as directed

Providing and laying 16-18 mm thick polished granite

stone machine cut in single piece (Max. available) in

sill and jambs of door, window, ventilation & lift wall

cladding, staircase flooring landing, risers & treads,

Rupees Three Thousand

skirting laid over 10mm thick cement mortar 1:3 (1

One Hundred Twenty

37 179.00 cement: 3 coarse sand) and jointed with grey cement Smt 3,129.99

Nine And Paise Ninety

slurry with matching pigment incl. rubbing and

polishing, half rounding edge and incl. fixing of hilty

fastener at every 1/3 span of sill as required size etc.

complete colour and shed as approved by architect

engineer in charge.

P & L 24" x 24" vitrified 8 mm thick tile flooring over

20 mm (average) base of cement mortar 1:6 (

cement: 6 coarse sand) on new surface or fixing on Rupees One Thousand

existing flooring by adhesive material including Four Hundred Seventy

dismentaling of existing flooring and jointed with color Two And Paise Ninety

cement slurry including finised with flush pointing & One Only

cleaning the surface etc. complete for DARK

shade/Light shade

P & L 24" x 24" vitrified 8 mm thick tile flooring over

20 mm (average) base of cement mortar 1:6 (1

Rupees One Thousand

cement: 6 coarse sand) on new surface or fixing on

Four Hundred Seventy

39 131.00 existing flooring by adhesive material including Smt 1,472.91

Two And Paise Ninety

dismentaling of existing flooring and jointed with color

cement slurry including finised with flush pointing &

cleaning the surface etc. complete for antiskit

SCHEDULE- B Page

Sr. No. Total Qty Description Unit Rate in Figure Rate in Words

Providing and laying coloured glazed tiles of the size

Rupees One Thousand

Five Hundred Twenty

40 481.00 in skirting, risers of steps and dedo on 10 mm. thick Smt 1,523.67

Three And Paise Sixty

cement plaster 1:3 (1 cement: 3 coarse sand) & jointed

with white cement slurry.

Providing and fixing Sand which type Granite platform

including supplying and fixing granite stone 18 mm

thick mirror polished 1st quality Granite stones in top

and side posiition and vertical strip at front over 25 Rupees Five Thousand

41 34.00 mm thick polished kotah stone platform fixing in top Smt 5,058.08 Fifty Eight And Paise

and sides and itermediates supports fixing with Eight Only

cement mortar and adhesivee and finishing including

cutting for fixing of sink any size (as directed by

engineer incharge) at required position etc complete.

Providing & fixing 18 mm thick of approved quality of

green marble urinal partition in single piece of size

Rupees Two Thousand

0.62 x 1.20 mt. in cement mortar 1:1 (1 cement:

Three Hundred Eighteen

42 4.00 coarse sand) and finishing with white cement Smt 2,318.96

And Paise Ninety Six

including polishing on bothsides, finishing edges with

round shape of marble etc completed as directed by

Providing and laying machine cut free edges machine

polished Kota stone for shelves in cupboard and walls

Rupees Nine Hundred

in single piece (Miximum 150) 25 mm including

43 13.00 Smt 996.87 Ninety Six And Paise

cutting grooves in walls and fixing the stone with neat

Eighty Seven Only

cement slurry in true line and level as directed . etc.

complete. for Shelves

Providing and laying polished River wash Kota stone

slab flooring over 20mm (Average) thick base of

Rupees One Thousand

cement mortar 1:6 (1-cement: 6-coarse sand) or L.M.

One Hundred Ninety

44 180.00 1.1.5 (1-Lime putty: 1.5- coarse sand) laid over and Smt 1,193.82

Three And Paise Eighty

jointed with grey cement slurry mixed with pigment to

match the shade of slab including rubbing and

polishing etc. complete. (A) 25mm thick

Providing and laying Multicoloured Kota stone slab

flooring over 20mm (Average) thick base of cement

Rupees One Thousand

mortar 1:6 (1-cement: 6-coarse sand) laid over and

Three Hundred Eighty

45 150.00 jointed with 3 mm thick epoxy grouting as per Smt 1,384.71

Four And Paise Seventy

approved make and sample work including including

rubbing and polishing, etc. complete. (A) 20-25 mm

Providing and laying 18 mm thick Dholpur stone

flooring/ wall cladding laid with groove 12mm x

12mm over 10 mm thick cement mortar 1:3 (1

Rupees One Thousand

cement: 3 coarse sand) and jointed with grey cement

46 652.00 smt 1,550.35 Five Hundred Fifty And

slurry with matching pigment incl. fixing of hilty

Paise Thirty Five Only

fastener at every 1/3 span of sill as required size etc.

complete colour and shed as approved by architect

engineer in charge

Providing and laying broken chine mosaic flooring for

terrace using 12 mm to 20 mm broken pieces of glazed

tiles to be laid over cement mortar 1:3 to plain or

Rupees Seven Hundred

slope and to be tempered to bring mortar creme out

47 61.00 smt 779.70 Seventy Nine And Paise

upto surface using white cement including rounding

off junctions and extending them upto 15 cm along the

wall,clearing with water and oxalic acid etc. as

SCHEDULE- B Page

Sr. No. Total Qty Description Unit Rate in Figure Rate in Words

Providing and laying cement concrete flooring 1:2:4 (1-

Rupees Three Hundred

cement: 2-coarse sand: 4-graded stone aggregate

48 74.00 Smt 355.69 Fifty Five And Paise

20mm nominal size) laid in one layer and finished

Sixty Nine Only

with a floating coat of neat cement. (B) 50mm thick..

Providing cement vata (10 cm x 10 cm size) quartar Rupees Twenty Four

49 89.00 round in cement mortar 1:1 including neat cement Rmt 24.28 And Paise Twenty Eight

finishing watering etc. complete. For all floor Only

Providing, laying, spreading and compacting graded

stone aggregates to Wet Mix Macadam in 150mm

thickness as per MORT & H specification including

premixing the material with water at OMC in

Rupees Eight Hundred

mechanical mix plant, carraige of mixed material by

50 207.00 Cmt 860.61 Sixty And Paise Sixty

tippers to site, laying in uniform layers with paver or

motor grader in sub base/ base course on well

prepared surface and compacting with vibratory roller

to acheive the desired density.complete as per MORT

Providing and fixing flush door both sides laminated

and I.T.W. beading all around by using shutter

fabricated from 35 mm thick solid core malemine

faced three layered pre laminated flat pressed wood

based exterior grade bonded BWP/BWR synthetic

Rupees Three Thousand

resin having stamped IS 12823 grade I type II

Nine Hundred Ninety Six

51 64.00 including three coats of lacquer polishing to exposed Smt 3,996.57

And Paise Fifty Seven

wooden surfaces and Stainless steel decorative type

designs fixtures/ fastening 2Nos. Handles, 2Nos.

Aldropes, towerbolt etc.including I.T.W. triangular

batten patti of size 30m.m.x 30m.m. etc. as per

architectural detailed drawing and as directed by

engineer in charge.

Providing and fixing FRP frame size 125x65 mm and

35mm thick FRP shutter with wood grain raised

panneled design finish shutter having extra

reinforcement on sides & edges in Gel coat finish. The

core of the shutter & frame is to be filed up with

Rupees Two Thousand

injected polyurethene foam done in situ alongwith

52 22.00 Smt 2,019.98 Nineteen And Paise

embedded wooden pieces for stiffening & also taking

Ninety Eight Only

hinges & fintures. The whole FRP frame & shutter is to

be water proof weather proof, termite proof &

resistance to mild acid/ alkali. Rates are to be inclusive

of S.S hinges with fastener sleeve & alluminium

fixtures & fastenings.

Providing and fixing rolling shutters of approved make

made of 80 mm wide M.S. laths inter-locked together

through their entire length and jointed together at the

ends by end locks mounted on specially designed pipe Rupees Three Thousand

53 9.00 shaft with bracket plates, guide channels and Smt 3,554.40 Five Hundred Fifty Four

arragements for inside and outside locking with push- And Paise Forty Only

pull operation including the cost of hood cover and

spring etc. complete. (A) Shutters having width below

SCHEDULE- B Page

Sr. No. Total Qty Description Unit Rate in Figure Rate in Words

Providing and fixing window having extruded

aluminum Colour anodized section frame main outer

size 95mm x 24mm x 1.17mm @ wt.of 0.738 Kg/mt

horizontal Three track member size 92mm x 31.75mm

x 1.30mm,@ Wt.1.07 Kg/mt, vertical member of size

92mm x 31.75mm x 1.50mm @ Wt. 1.06 Kg/mt with Rupees One Thousand

sliding shutters of horizontal member size 40 Five Hundred Eighty

mmx18mm x1.29mm @ wt.of 0.456 Kg/mt, vertical Three And Paise Ninety

member of size 40mm x 18mm x 1.29 mm @ wt.of Five Only

0.456Kg/mt/ with 5 mm thick transparent bronze

colour tinted float glass with powder coated aluminum

fittings and fixtures and transparent silicon sealant

glass fixing to frame as per details etc(2 sliding shutter

+1 mosquito jali shutter)

Providing and fixing standared extruded of

alluminium section of size 63.50 x 38.10 x 1.95 mm @

Wt 1.094Kg/ Rmt with colour anodized alluminium Rupees One Thousand

55 10.00 frame with 5 mm thick transparent bronze colour Smt 1,301.82 Three Hundred One And

tinted float glass with colour anodized alluminium Paise Eighty Two Only

frame for ventilation with 5 mm thick frosted glass as

details etc complete for.window

Fabricating, supplying and fixing in position SS railing

for staircase and balcony with 50mm dia.(16 gauge)

TOP RAIL, 32X32mm Square pipe(16 gauge)

VERTICAL SUPPORT & 16mm Dia. (16 gauge) HORI. Rupees Three Thousand

MEMBER brush finish and 304 grade as per Indian Two Hundred Twenty

Standrd and detailed drawing including grinding, One And Paise Ninety

cleaning and filling the welded spots with SS finish Only

(Only Length will be paid for payment heigth max.1.0

mt.). The Work to be executed as per consultant

Providing and fixing in position S.S. daso by providing

top 50 mm dia stain less steel pipe rail with starting Rupees One Thousand

and end point vertical post of 50 mm dia with Seven Hundred Ninety

wall/column including bending welding and fixing for Four And Paise Seventy

staircase and balcony as directed.(testing is required Seven Only

of s.s 304) for all floor

Providing laying and jointing in true line and level

15mm dia. U.P.V.C. Pipe (SCH- 40) for cold water

including fittings as approved by Engineer In Charge.

Rupees Seventy Two

Pipe shall be fixed on the wall with the help of clamp at

58 159.00 Rmt 72.65 And Paise Sixty Five

every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level

mm dia. U.P.V.C. Pipe (SCH-40) line including fittings of

standard make as apprroved by Engineer In charge.

Pipe shall be fixed on the wall with the help of clamp at Rupees Ninety One And

every two meter C/C or shall be concealed as directed Paise Eighty Four Only

including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

SCHEDULE- B Page

Sr. No. Total Qty Description Unit Rate in Figure Rate in Words

Providing laying and jointing in true line and level

mm dia. U.P.V.C. Pipe (SCH-40) line including fittings of

standard make as apprroved by Engineer In charge.

Rupees One Hundred

Pipe shall be fixed on the wall with the help of clamp at

60 974.00 Rmt 148.12 Forty Eight And Paise

every two meter C/C or shall be concealed as directed

including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level

mm dia. U.P.V.C. Pipe (SCH-40) line including fittings of

standard make as apprroved by Engineer In charge.

Rupees One Hundred

Pipe shall be fixed on the wall with the help of clamp at

61 210.00 Rmt 195.67 Ninety Five And Paise

every two meter C/C or shall be concealed as directed

Sixty Seven Only

including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing, laying and jointing in true line and level

diametre U.P.V.C (Type B) conforming to IS 13592-

1992 with one end plain and other end socketed with

rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe

shall be jointed with each other with rubber lubricant, Rupees Eight Hundred

62 195.00 pipe shall be fixed on wall using of PVC clamp of the Rmt 897.79 Ninety Seven And Paise

size 110 mm diametre x 149 mm length x 145 mm Seventy Nine Only

heigh at every 2000 mm center to center or shall be

concealed in walls as directed including necessary

fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

Providing, laying and jointing in true line and level

diametre U.P.V.C (Type B) conforming to IS 13592-

1992 with one end plain and other end socketed with

rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe

shall be jointed with each other with rubber lubricant, Rupees Eight Hundred

63 214.00 pipe shall be fixed on wall using of PVC clamp of the Rmt 834.38 Thirty Four And Paise

size 160 mm diametre x 210 mm length x 196 mm Thirty Eight Only

heigh at every 2000 mm center to center or shall be

concealed in walls as directed including necessary

fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

Providing and fixing to wall ceiling and floor 10.0 Kg.

F/Cm2 working pressure poluthene pipes of the

Rupees One Hundred

following outside Dia. Low densidy, complete with

64 60.00 Rmt 179.56 Seventy Nine And Paise

special falnge compression type fittings, wall clipsetc.

including making good the wall ceiling and floor.(E)

Providing and fixing to wall ceiling and floor 10.0 Kg.

F/Cm2 working pressure poluthene pipes of the

Rupees Two Hundred

following outside Dia. Low densidy, complete with

65 70.00 Rmt 280.23 Eighty And Paise

special falnge compression type fittings, wall clipsetc.

Twenty Three Only

including making good the wall ceiling and floor.(E)

Providing and fixing to wall ceiling and floor 10.0 Kg.

F/Cm2 working pressure poluthene pipes of the

Rupees Three Hundred

following outside Dia. Low densidy, complete with

66 140.00 Rmt 339.05 Thirty Nine And Paise

special falnge compression type fittings, wall clipsetc.

including making good the wall ceiling and floor.(E)

SCHEDULE- B Page

Sr. No. Total Qty Description Unit Rate in Figure Rate in Words

Providing and fixing concealed center point to wall

ceiling & floor CPVC (SDR 13.5) PIPE having National

Rupees One Hundred

Sanitation Foundation (NSF) seal for potable water of

67 60.00 Rmt 170.36 Seventy And Paise

following dia. nominal bore tube fittings and clamps

Thirty Six Only

including making good the wall, ceiling and floor etc.

complete.[A] 15 mm

Providing and fixing concealed center point to wall

ceiling & floor CPVC (SDR 13.5) PIPE having National

Rupees Two Hundred

Sanitation Foundation (NSF) seal for potable water of

68 100.00 Rmt 253.82 Fifty Three And Paise

following dia. nominal bore tube fittings and clamps

Eighty Two Only

including making good the wall, ceiling and floor etc.

complete.[A] 25 mm

Providing and fixing concealed center point to wall

ceiling & floor CPVC (SDR 13.5) PIPE having National

Rupees Four Hundred

Sanitation Foundation (NSF) seal for potable water of

69 1,080.00 Rmt 447.72 Forty Seven And Paise

following dia. nominal bore tube fittings and clamps

Seventy Two Only

including making good the wall, ceiling and floor etc.

complete.[A] 40 mm

Supplying & installing Brass Ball Valve conforming to

IS 778, of RB, Italy or equivalent. Ball valve must be Rupees One Thousand

70 4.00 having screwed ends. The ball valve should be with Nos. 1,086.76 Eighty Six And Paise

stand with maximum pressure up to 16 Kg/ cm². Seventy Six Only

Complete job as specified & directed. a) 25mm

Supplying & installing Brass Ball Valve conforming to

IS 778, of RB, Italy or equivalent. Ball valve must be Rupees Two Thousand

71 3.00 having screwed ends. The ball valve should be with Nos. 2,044.24 Forty Four And Paise

stand with maximum pressure up to 16 Kg/ cm². Twenty Four Only

Complete job as specified & directed b) 40mm

Rupees Two Thousand

Providing and fixing screw down two way bib taps of

Three Hundred Fifty

72 4.00 15mm dia- Brass down brigh polished jaquar code no. Nos. 2,355.32

Five And Paise Thirty

Supplying and Installing 3 layer PVC water tank (ISI)

Rupees Eleven And

73 15,000.00 of required capacity each with all necessary fittings Liter 11.11

Paise Eleven Only

and connection etc. complete on terrace.

Rupees Two Hundred

Providing and fixing Gun metal check or non-return

74 6.00 Nos. 203.82 Three And Paise Eighty

fullway wheel valve. (E) 25 mm dia.

Rupees Six Hundred

Providing and fixing Gun metal check or non-return

75 5.00 Nos. 663.43 Sixty Three And Paise

fullway wheel valve. (E) 40mm dia.

Forty Three Only

Providing and fixing table top wash basin on 18mm

thick black shade polished granite for top with 2 Nos.

of C.I. Heavy brecket with 1 Nos. of wash basin Jaquar

brand or equivalent, C.P. brass Jaquar pillar cock or

Rupees Thirteen

equivalent, angle valve or equivalent, C.P. brass

Thousand One Hundred

76 15.00 extension nipple 62mm long, S.S. flange water super Nos. 13,123.94

Twenty Three And Paise

connection pipe 60cm. long and full thread waste

Ninety Four Only

coupling includingm, bottle trap making hole in

granite for wash basin etc. complete. Table Top Wash

Basin (jaquar- KUS-WHT-35901), Piller Cock (jaquar-

FLR-5007B), Angle Valve (jaquar- FLR-5053N)

Providing and fixing water closet squatting Pan

Rupees One Thousand

(Indian type W.C. Pan) size 580mm including

77 7.00 Nos. 1,019.19 Nineteen And Paise

Earthwork, bed concrete, foot reste and trap (A)

Vitreous China. (I) Long pattern = White colour

SCHEDULE- B Page

Sr. No. Total Qty Description Unit Rate in Figure Rate in Words

Providing and fixing wash down wall hung water

closet(European type) of jaquar or equivalent with

integral 'P' trap jointed within C.I pipe in C:M 1:1

including matching seat cover, chair braket, Conceled

Rupees Seventeen

metropole of jaquar or equivalent, 2 way bibcock of

jaquar or equivalent, health foucet of jaquar or

78 13.00 Nos. 17,837.61 Hundred Thirty Seven

equivalent with 1 m extension pipe, toilet paper

And Paise Sixty One

holder of jaquar or equivalent with all accessories etc.

complete. Wall Hung Water Closet (jaquar- SLS-WHT-

6953BIPPSM), Metropole (jaquar- FLV-1093N), 2 Way

Bib Cock (jaquar- FLR-5041N), Health Faucet (jaquar-

ALD-573), Toilet Paper Holder (jaquare- ACN-1151N)

Providing and fixing urinals of jaquar or equivalent

with integral drain pipe jointed within C.I pipe in C:M

1:1, Conceled cock, all accessories etc. complete. Rupees Ten Thousand

79 6.00 (jaquar- URS-WHT-13255), Urinal Flush Valve Jaquar Nos. 10,094.95 Ninety Four And Paise

PRS-073 or equivalent with integral drain pipe jointed Ninety Five Only

within C.I pipe in C:M 1:1, Conceled cock, all

accessories etc. complete.

Providing and Fixing autoclosing concealed urinal Rupees Two Thousand

80 8.00 flush valve (jaquar PRS-073) with wall flange etc. Nos. 2,121.00 One Hundred Twenty

complete. As directed by EIC. One Only

Providing and fixing 600mm x 450mm bevelled edge

Rupees Eight Hundred

mirror of superior glass mounted on 6mm thick A.C.

81 15.00 Nos. 833.73 Thirty Three And Paise

sheet or plywood sheet and fixing to wooden pluge

Seventy Three Only

with C.P. brass screws and washers.

Providing and fixing Kitchen sink with C.I. or M.S.

Rupees Two Thousand

brackets, painted white including cutting holes in

Three Hundred Twenty

82 2.00 walls and making good the same but excluding fittings. Nos. 2,326.66

Six And Paise Sixty Six

(C) Vitreous China Sink.(i) 600mm x 450mm x 150mm

Providing and fixing PVC SWR Nahni trap IS 14735 for

drain- 100 mm diameter with jali of the following Rupees Six Hundred And

83 35.00 nominal diameter of self cleansing design with C.I Nos. 600.23 Paise Twenty Three

scread down or hinged grating including the cost of Only

cutting and making good the walls.

Providing and fixing chromium plated brass half trun Rupees Seven Hundred

84 1.00 flush cock of approved quality including fixing in Nos. 718.67 Eighteen And Paise Sixty

pipeline etc. complete. (ii) 25mm dia. Seven Only

Providing and fixing S.W. gully trap with C.I. grating

Rupees One Thousand

brick masonry chamber and water tight C.I. cover with

Two Hundred Forty Six

85 14.00 frame of 300mm x 300mm size (inside) with standard Nos. 1,246.92

And Paise Ninety Two

weight. (i) Square mouth traps.(B) 150mm x 100mm

size P or R type

Providing and fixing 2 Nos. support arms and backrest

Rupees Twenty Six

to mount at fixed height (Model R 1100-Commander

Thousand Five Hundred

86 1.00 or equivalent) for handicap toilet complete as Nos. 26,577.14

Seventy Seven And Paise

recommended by the etc completed as directed by

Providing and fixing raised toilet seat with cover for Rupees Twenty Four

handicap toilet (Model R-35: Presalit – Commander or Thousand Six Hundred

equivalent) as recommended by the etc completed as Seven And Paise Sixty

directed by E.T.C/ PMC . Four Only

Providing and fixing brackets, tracks (Model R4140)

Rupees Forty Three

with flexible feed & waste pipes for adjustable type

Thousand Five Hundred

88 1.00 wash basin complete as recommended, for handicap Nos. 43,506.76

Six And Paise Seventy

toilet (Make: Presalit – Commander or equivalent)etc

completed as directed by E.T.C/ PMC .

SCHEDULE- B Page

Sr. No. Total Qty Description Unit Rate in Figure Rate in Words

Providing & fixing (Make Jaguar COP-281PM or

eqivalent) Wall Mixer 3-in-1 System with Provision for

Rupees Five Thousand

both Hand Shower and Overhead Shower Complete

89 4.00 Each 5,450.97 Four Hundred Fifty And

with 115mm Long Bend Pipe, Connecting Legs & Wall

Paise Ninety Seven Only

Flange with all accessories etc. including labour work

Providing & fixing (Make Jaguar OHS-35497 or

Rupees Three Thousand

eqivalent) Overhead Shower 200X200mm Square

Nine Hundred Sixteen

90 4.00 Shape Single Flow (ABS Body Chrome Plated with Gray Each 3,916.78

And Paise Seventy Eight

Face Plate) with Rubit Cleaning System including

labour work complete.

Constructing brick masonry chamber for underground

C.I. Inspection chamber and bends with briocks having

croshing strength not less than 35Kg. Cm² in C.M. 1:5

C.I. cover with frame (Light duty) 455mm x 610mm

intenal dimensions total weight of cover with frame to

Rupees Two Thousand

be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of

Nine Hundred Thirty

91 17.00 frame 15Kg.) (R.C.C. top slabe with 1:2:4 mix (1- Nos. 2,932.93

Two And Paise Ninety

cement: 2- coarse sand: 4-graded stone aggregate

20mm size) foundation concrete 1:5:10 inside plaster

15mm thick with cement mortar 1:3 finished smooth

with a floating coat of neat cement on walls and bed

concrete etc. complete.(i) Inside dimensions 455mmx

610mm and 450mm deep for single pipe line

Extra over items 24.44 for every additional depth of Rupees Two Hundred

92 6.00 0.1M. of part thereof beyond 450mm depth for Brick NOS 242.39 Forty Two And Paise

masonry chamber.(i) for 455mm x 610mm size. Thirty Nine Only

Providing and constructing SOAK WELL of 2.50m

internal dia and 6.00 depth depth internal clear

dimention including the cost of execavation, PCC 1:4:8

foundation for honey combed masonary in C.M. 1:4

(1cement: 4 sand), casting R.C.C. 1:2:4 (1cement:

Rupees Forty Six

sand: 4 graded stone aggregate 20mm nominal size)

Thousand Four Hundred

93 7.00 top slab 12 thick with C.I. manhole cover 600mm x Each 46,412.53

Twelve And Paise Fifty

450mm size of 35 kg. weight and 75mm dia C.I. pipe

1800mm long with 75mm dia cowel vent and filling

the wall 1000mm in depth with dry brick bats

including providing vata in C.M. 1:3 (1cement: 3 sand),

curing including cost of reinforcement etc. complete as

per detailed drawing and directed by E.I.C.

Construction Septic tank inside dimention of 4.00 m in

length & 2.50 m in width & 2.00 m depth including

excavating any type of soil as shown and mentioned in

the drawing, providing and laying 0.10 m thick plain

cement concrete 1:3:6 (1 cement: 3 coarse sand:

graded stone agg.) 40 mm thick IPS flooring at bottom

with brick masonary 0.23 m thick walls CM 1:5 (1

cement: 5 coarse sand) and intermediate partition CM Rupees Seventy Two

1:4 & RCC Top slabs12 cms thick in 1:2:4 (1 cement: 2 Thousand Nine Hundred

coarse sand: 4 graded stone aggregate) including Fifty Five And Paise

reinforcement as per design and 15 mm thick cement Thirty Three Only

plaster in CM 1:4 with floating coat of neat cement

slurry inside, top and around tank below 15 cm on

ground level, Also provide Two nos CI Manhole frame

and cover of size 60 cm x 45 cm & 75 mm dia. PVC

kgf/ Sq cm pressure air vent pipe in 3.00 length with

cowl etc complete as per direction of Engineer in

SCHEDULE- B Page

Sr. No. Total Qty Description Unit Rate in Figure Rate in Words

Constructing Manhole with R.C.C. top slab in 1:2:4 mix

(1 cement :2-coarse sand : 4-graded stone aggregate

20mm nominal size) foundation concrete 1:3:6 mix (1-

cement : 3 coarse sand :6-Brick bats 40 + 50mm size)

inside plastering 15mm thick with Cement Mortar 1:3

(1-Cement : 3-coarse sand) finished with a floating

coat of neat cement and

making channels in cement concrete 1:2:4 mix (1-

Cement :2 Coarse sand :4-stone aggregate 20mm

Thousand Forty Two

95 9.00 nominal size) finished smooth complete including Each 11,042.74

And Paise Seventy Four

curing and festing (i) Inside size 900mm x 1200mm

and 1.5M. deep including C.I. cover with frame size

560mm diameter total weight of cover and frame to be

not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of

frame 64 Kg.)(A) With 230mm thick walls of brick

msonryusing brick having crushing strength not less

than 35Kg./ Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-

Coarse sand) (1) A type depth 0.90 Metre for 150mm

diameter sewer.

(I) Extra rate for constructing B.B. masonry for every Rupees Five Hundred

96 3.00 additional depth of 0.1M. or Part thereof over item Nos 522.96 Twenty Two And Paise

No.24.27 (I) for depth from 0.9M to 1.5M. Ninety Six Only

Rupees Nine Hundred

Providing and fixing C.I Manhole cover 0.60 mt x

97 2.00 Nos. 958.17 Fifty Eight And Paise

mt size having weight not less than 35 Kg

Providing, laying and fixing 200 mm vide PVC water

stop of approved make and grade thickness in

Rupees Three Hundred

concrete work for water tightstructures like retaining

98 33.00 Rmt 351.48 Fifty One And Paise

walls of pound water body and underground water

Forty Eight Only

tank including cleaning and placing in line level etc.

complete, as directed.

Providing & Fixing iron steps of size 500mm x 150mm Rupees Two Hundred

99 8.00 x 22.5 mm and painting with two coats of Nos. 207.66 Seven And Paise Sixty

anticorrosive paint etc. complete. Six Only

Providing and fixing screw down bib taps of following Rupees Two Hundred

100 21.00 size: (B) Brass chromium plated screw down bib tap Nos. 214.81 Fourteen And Paise

(I) 20 mm dia. Eighty One Only

Providing and fixing C.P. brass towel rail comlete with Rupees Six Hundred

101 2.00 C.P. brass brackets fixed to wooden plugs with C.P. Nos. 616.42 Sixteen And Paise Forty

brass scews.(B) 600mm x 20mm size. Two Only

Water Tank Overflow Alarm Wired Sensor Security Rupees Eighteen

System with installation providing and fixing all Thousand Four Hundred

necessary installation pipe fitting with 6 sensor and Four And Paise Twenty

controller and cable fitting as well. Two Only

SCHEDULE- B Page

Sr. No. Total Qty Description Unit Rate in Figure Rate in Words

Cobble stone 80 mm thick (150 x 150 mm/ 200 x

mm): Providing and laying of 80 mm thick (+10 mm)

cobble stone in multi colour (Sand stone) as per

approved sample by Architect/ Client. Fixing with

mm thick cement mortar (1: 4) of thickness on PCC

surface as per detailed drawing. The joints of the stone

shall be properly and firmly filled using properly

mixed mortar and joints shall be cleaned and well

pointed using cement mortar. Rupees One Thousand

Work Including levelling in proper line and level with Four Hundred Ninety

using surface vibrator etc complete. including cost of Nine And Paise Eighty

all type of tools, tackles, all labour, all type of Five Only

materials, transportation, cleaning of surfaces, if

required protecting, for at all level, all depth, all

Height, all lead and lift etc. work complete as per the

detailed drawing, approved sample, specifications and

instruction of Architect/ EIC. Sample mock shall be

approved from Architect/ Client. Material Test

certificate shall be submitted by the contractor.

(Excluding PCC and RCC)

Providing and laying 20mm thick stone stonecrete in

Rupees Two Thousand

laid over 20mm thick cement mortar 1: 3 (1 cement:

One Hundred Fifty Five

104 1,055.00 coarse sand) and jointed with grey cement slurry with Smt 2,155.34

And Paise Thirty Four

matching pigment in flooring complete as approved by

architect engineer in charge.

Tensile fabric canopy: Design, fabrication and

installation of Tensile fabric Canopy using steel

structure,white/ Colored Fabric of 600 GSM with both

side PVDF coating (Ferrari, Mahler, Sioen, Sprech

india) make as per approved sample by Architect with

Base plate, Anchor bolts, steel column, stiffner plate, gi

wire rope, nut etc complete.

Rupees Six Thousand

Work complete: Including cost of all type of tools,

Two Hundred Forty

105 148.00 tackles, scaffolding, all labour, materials, Smt 6,248.87

Eight And Paise Eighty

transportation, Finishing, all type of fabrication & steel

work (including epoxy paint), accessories,. Work

complete for at all floor, all level, all depth, all Height,

all lead and lift etc. work complete as per the Detailed

specification, shop drawing, approved sample,

instruction of Architect/ EIC. Sample mock shall be

approved from Architect/ EIC. Roof plan area shall be

measured for payment.

Providing and fixing pre-cast Rubber Dye/ steel Dye

inter locking concrete block 60mm thick with grade of

concrete M300 pnumatic compressed/ vibrated

Rupees Seven Hundred

mechanically and as per approved design Confirming

106 1,878.00 Smt 707.55 Seven And Paise Fifty

to IS 15658: 2006 including 35 mm Sand layer for

levelling and filling the joint with sand in proper line

and level as per guidlines of IRC: SP 63-2018 etc.

SCHEDULE- B Page

Sr. No. Total Qty Description Unit Rate in Figure Rate in Words

Grass Paver block (600 x 400 mm ) Providing and

laying shot blasted interlocking/ Non- interlocking

grey/non colored grass paver blocks of high density

mm thick M-40 grade of Alcock, Vyara, Nitco or

equivalent as per approved make for parking areas,

service lanes,Pathways and other areas as mentioned

in the drawing. Including providing and laying 50 to

80 mm thick average bedding layer of coarse sand

below paver block as per required grading and

Rupees One Thousand

specification and 40 mm thick average FYM Soil filling

Three Hundred Forty

107 1,102.00 as required and Specification and aslo including smt 1,345.32

Five And Paise Thirty

Suppying and Planting Specified Carpet lown as

required and Specification and Laid paver block shall

be mechanically compacted. The work of the bpaving

blocks shall be executed in line and level by skilled

mason of flooring work only. Cutting of paver block by

machine cut only and laying to be done by skilled

flooring mason. The Finished surface of the Paver

Block shall have Coarse Sand Texture Finish. Paver

blocks shall be compacted and shall be relaid if

Providing and fixing pre-cast concrete kerb stone of

gray cement based concrete block 30cm length, 30cm

Rupees Three Hundred

height and 15cm thick of M250 grade concret as per

108 2,143.00 Rmt 374.92 Seventy Four And Paise

approved design and including excavation for fixing in

Ninety Two Only

proper line and level, filling the joint with C:M 1:3

(1cement: 3fine sand) etc complete.

Applying priming coat over kerb stone surface after

and including preparing the surface by throughly

Rupees One Hundred

cleaning, oil, grease, dirt and other foreign matter and

109 921.00 Smt 131.86 Thirty One And Paise

scoured with brushes fine steel wood.scrapers and

Eighty Six Only

send paper with ready mixed priming paint brushing

red lead and Painting two coats enamel paint

Supplying and fixing reinforced concrete heavy duty

Rupees One Thousand

non-pressure pipes with collars for culverts including

Three Hundred Fifty

110 187.50 setting and joining the pipes in C.M. 1:2 watering and Rmt 1,355.85

Five And Paise Eighty

laying (to level or slope) of I.S. class NP2 of following

internal diameters.(iii) 600mm dia.

Proving & fixing G.I. + Powder Coating Green Weld Rupees Two Thousand

111 859.00 Mesh Fencing As per Approved By Architect/ Engineer Smt 2,222.00 Two Hundred Twenty

in charge . Two Only

Scraping oil paint from steel and other metal surface Rupees Fifty Three And

and making the surface even (with Hand Scraping.) Paise One Only

Painting one coats (excluding priming coat) on

previously painted steel and other metal surface with

Rupees Fifty Nine And

113 720.00 enamel paint, brushing to give an even shade including Smt 59.35

Paise Thirty Five Only

cleaning the surface of all dirt, dust and other foreign

Removing dry or oil bound distemper by a washing

and scraping and sand papering the wall surface Rupees Eleven And

smooth including necessary repairs to scratches Paise Eighty Two Only

SCHEDULE- B Page

Sr. No. Total Qty Description Unit Rate in Figure Rate in Words

ENTERANCE GATE Designing, Providing and erection

of 15 mt x 6mt x 3 mt. appropriate depth "Artistic

gate" with ferro cement/FRP sturcutre 50mm

thickness of rock stone structure (hand made artistic)

alongwith tree design as per the scalled model with a

cement mortar of 1:4 (1 cement : 4 sand),

6/8/10/16,25 mm FE500 TMT bar, chicken/mosquito

Rupees Thirty Five

wire mesh jali of 14*14 mesh, GI wire, painting with

115 1.00 Job 35,35,000.00 Lakh(s) Thirty Five

required colur and pigments, etc as directed Artistic

work as per the design inclusive of ferro structure,

steel work, rock stones structure, painting etc.OR FRP

ISO resin, matting, cobalt, catalyst, wax polish and

natural look painting with all required welding,

equipments, DG set, tools, scaffolding, transportation

at site as per the requirement and directed by EIC and

ENTERANCE GATE "HANFESHWAR CAMP SITE "

Designing, Providing and erection of 10 mt x 6mt x

mt. appropriate depth "Artistic gate" with ferro

cement/FRP sturcutre 50mm thickness of rock stone

structure (hand made artistic) alongwith tree design

as per the scalled model with a cement mortar of 1:4

(1 cement : 4 sand), 6/8/10/16,25 mm FE500 TMT

bar, chicken/mosquito wire mesh jali of 14*14 mesh, Rupees Twenty Lakh(s)

GI wire, painting with required colur and pigments, etc Twenty Thousand Only

as directed Artistic work as per the design inclusive of

ferro structure, steel work, rock stones structure,

painting etc OR FRP ISO resin, matting, cobalt, catalyst,

wax polish and natural look painting with all required

welding, equipments, DG set, tools, scaffolding,

transportation at site as per the requirement and

directed by EIC and architect.

NARMADA MATA STATUE Designing, Providing and

erection of Narmada Mata statue with aaprox size

mtr.Height. appropriate width Grade FRP, making

different initial mould structure using FE 500 TMT

bars and clay mould with hand work by experienced

artists giving all shapes and expression with as

approved by EIC and then final FRP ISO resin, matting, Rupees Fifteen Lakh(s)

117 1.00 cobalt, catalyst, wax polish and natural look painting Job 15,65,500.00 Sixty Five Thousand Five

with all required welding, equipments, DG set, tools, Hundred Only

scaffolding, transportation at site as per the

requirement and directed by EIC and architect. ISO

Grade Gel coat for First Layer, carox Pigment As per

sculptures color layer 450 GSM Emulation Matt with

Standard GP Resin. Final Color Coating Standard Auto

color,required Heavy Metal Frame strucrture ect.

SCHEDULE- B Page

Sr. No. Total Qty Description Unit Rate in Figure Rate in Words

Providing and applying saint gobain certain teed

roofing shingles "Landmark-AR" with Shadow ridge,

swift starter as per EIC. All concrete surfaces shall be

overlaid with a minimum of 1” Cement screed Surface

provided shall be duly rendered to a smooth finish and

bone dry. A coat of bituminous primer will be applied

and left till it touch- dry. All junctions (if any) of

sloping roof with a vertical wall or valley gutter if any Rupees One Thousand

will be lined with one feet wide flashing membrane Eight Hundred Twenty

Starter course will be fixed at the bottom of sloping Eight And Paise Ten

roof surface (Eave edge) before commencing the Only

application of CERTAINTEED shingles. CERTAINTEED

shingles will then be fastened using approved

Corrosion resistant nails, at suitable distance as per

manufacturer’s specifications. The front part of the

shingle shall be stuck to the subsequent shingle using

the self-adhesive tape provided at the bottom. Ridges

will be fixed once the surface coverage is complete

Children Play Equipment : Providing and installing

selected and specified children play equipments as per

the drawings and specifications as per instructions of

EIC/ Architect. Item includes cost of all labour,

transport, any types of civil/fabrication work of fixing

of play equipments etc. All works are carried as per

Rupees Sixty Seven

approval and instructions of the architect.

119 1.00 b). Wave slide :Size: 6 ft Height & 11 Ft Length Deck Nos 67,367.00

Hundred Sixty Seven

comprising from GI Sheet Tray 6 to- 6.5 ft height and

bottom vertical Stand support made from of 50 NB GI

Pipe, Ladder made from GI sheet Channel and steps in

Tray form made from GI sheet and Railing of 20 NB GI

Pipe. Slide 11 ft long made from Fiber Glass Reinforced

Plastic (FRP) minimum thickness 5 mm with support

frame of MS on reversed side.

Children Play Equipment : Providing and installing

selected and specified children play equipments as per

the drawings and specifications as per instructions of

EIC/ Architect. Item includes cost of all labour,

transport, any types of civil,fabrication,PU paint work Rupees Nineteen

of fixing of play equipments etc. All works are carried Thousand One Hundred

as per approval and instructions of the architect. Sixty Four And Paise

d) Double See-Saw- 6.5 ft Length ( For 4 children ) Seventy Five Only

Two pair seesaws of 32 NB GI Pipe with Fiber Glass

Seats 6.5 ft long, having handle of 20 NB GI pipe and

bottom frame of 32 NB GI pipe, having MS bush and

flanges for ditch-able arrangement

Children Play Equipment : Providing and installing

selected and specified children play equipments as per

the drawings and specifications as per instructions of

EIC/ Architect. Item includes cost of all labour,

transport, any types of civil,fabrication,PU paint work

Rupees Twenty Four

of fixing of play equipments etc. All works are carried

Thousand One Hundred

121 1.00 as per approval and instructions of the architect. Nos 24,101.63

One And Paise Sixty

g) Swing (For 2 children, 7 Ft Height) Two number

sides stand (vertical) of 40 NB GI Pipe span 8 ft. with

top Horizontal member of 50 NB GI pipe with top

frame of 15 NB GI Pipe in Triangle Shape, Height 7 ft.,

Nos. Seats of FRP and zinc plated chain and kada with

SCHEDULE- B Page

Sr. No. Total Qty Description Unit Rate in Figure Rate in Words

Providing & spreding Red murrum on pathway up to

Rupees Nine Hundred

any lead & lift etc. complete and red murrum sample

122 135.00 cmt 959.50 Fifty Nine And Paise

before execution approved by engineer in charge or

Providing & placing Circular Bench as per approved by

Architect/ Engineer in charge. Material: Canadian Rupees Thirty Two

123 4.00 wood top finish with metal supports Size : 6m Nos 32,522.00 Thousand Five Hundred

perimeter, 450mm height as per approved by Twenty Two Only

Engineer in charge.

Providing & placing Curvature bench as per as per

Rupees Thirty Thousand

approved by Architect/ Engineer in charge Material:

Two Hundred Seventy

124 4.00 Canadian wood top finish with RCC base supports Size Nos 30,279.80

Nine And Paise Eighty

: 4500 mm length, 450mm height as per approved by

Engineer in charge.

Providing panel wall for dry stone pitching in Rupees Two Thousand

uncourased rubble masonary with had stone of Six Hundred Eighty

approved quality in cement. mortar 1.5 including Seven And Paise Ninety

curing etc, complete Four Only

Proving & supplying Field soil and Spreading and Rupees Six Hundred

126 300.00 mixing of soil & silt as per approved By engineer In Cmt 688.63 Eighty Eight And Paise

charges . Sixty Three Only

Rupees One Thousand

Proving & farm Yard Manure and laobur for Two Hundred Thirty

spreading and mixing farm yard Eight And Paise Seven

Supply and planting box hedge shrub of average height

1' to 2' by providing and fixing FYM @ rate of

cmt/pit with soil pesticide & insecticides. Plants shoud

be disease free and fungus free in 6"x8" polythene bag.

Plastic bags or pot should be removed carefully and Rupees One Thousand

soil around the roots should not be dropped or One Hundred Thirty

disturbed much. Bill shall be placed after completion Three And Paise Seven

of maintenance period but not before stabilizing the Only

shrubs. Mortality rates to be inclusive. Work shall be

done as shown in the drawing or as directed and

approved by EIC. The ground coverage should be

dense and uniform throughout the planting area.

Supplying well grown shrub plants of average height 3'

to 4' and planting in 300x300x300mm size pits by

mixing of FYM & existing soil in ration 1:3 with soil,

pesticide & insecticides. Plant should be disease free

and fungus free 8"x10" polythene bag. Plastic bag or Rupees One Thousand

pots should be removed carefully and soil around the One Hundred Thirty

roots should not be dropped or disturbed much. Bill Three And Paise Seven

shall be placed after 45 days of plantation of shrubs. Only

Mortality rates to be inclusive. Work shall be done as

shown in the drawing or as directed and approved by

EIC/Architect. The ground coverage should be dence

and uniform throuout the planting area.

SCHEDULE- B Page

Sr. No. Total Qty Description Unit Rate in Figure Rate in Words

Supply and planting of tree of specified variety

including excavation of pit 600x 600x600mm depth

mixing of FYM & existing soil in ratio 1:3 termite

treatment and planting of plants (height 8' to 10'

above bags/pots). Soil mounts 4'-8" in size. Tree

plantation should be carried on neatly accurately and

with perfection as per drawing and instruction given

by EIC. Plastic bags or pots should be removed Rupees Seven Hundred

130 210.00 carefully and soil around the roots should not be Nos 759.89 Fifty Nine And Paise

dropped or disturbed much. Bill shall be placed after Eighty Nine Only

completion of maintenance period but not before

stabilizing the hedges. Rates for mortality to be

inclusive. Providing and fixing tripod made of wooden

ball, height 1.5m. Top bracket to be 300x300mm leg

embedded in ground up to 300mm and to have tar

coat. Work shall be done as shown in the drawing or as

directed and approved by EIC.

Rupees Four Hundred

131 990.00 Proving & fixing Carpet lawn smt 461.79 Sixty One And Paise

Seventy Nine Only

Rupees Eighteen

132 5.00 Providing ficas toparies 1.5 to 1,8 m (h) each 18,584.00 Thousand Five Hundred

Eighty Four Only

Rupees Two Hundred

133 5.00 Providing ficas golden bushi-0.90 m Each 249.72 Forty Nine And Paise

Seventy Two Only

134 5.00 Providing date palm -3.00 to 3.60 m (h) Each 11,615.00 Thousand Six Hundred

Rupees Four Hundred

Providing ficas safari-black bushi for hedge-0.90 to

135 5.00 Each 464.60 Sixty Four And Paise

Rupees Seven Thousand

Five Hundred Forty Nine

136 5.00 bismarckia palm at lawn area-2.40 to 3 m Each 7,549.75

And Paise Seventy Five

GREY HERON SCULPTURE

Designing, Providing and erection made of MS with

mm thickness Sculpture with 2 mtr height in MS sheet

with artistic shape with natural element mix of virgin

Rupees Six Lakh(s) Six

137 1.00 and scrap material as per approved design by Job 6,06,000.00

EIC/Architect. Lifting, Placement & Fixing with all

required fabrication welding DG set, tools, crane and

scaffolding etc at the site as per requirement directed

by EIC and architect.

TIGER SCULPTURE

Designing, Providing and erection made of MS with

mm thickness Sculpture with life size in MS sheet with

artistic shape with natural element mix of virgin and

Rupees Six Lakh(s) Six

138 1.00 scrap material as per approved design by Job 6,06,000.00

EIC/Architect. Lifting, Placement & Fixing with all

required fabrication welding DG set, tools, crane and

scaffolding etc at the site as per requirement directed

by EIC and architect.

SCHEDULE- B Page

Sr. No. Total Qty Description Unit Rate in Figure Rate in Words

WILD LIFE SCULPTURE ON GATE

Designing, Providing and erection wild life sculpture

with life size High Grade FRP, making different initial

mould structure using FE 500 TMT bars and clay

mould with hand work by experienced artists giving

all shapes and expression with as approved by EIC and

then final FRP FRP ISO resin, matting, cobalt, catalyst, Rupees Two Lakh(s)

139 5.00 wax polish and natural look painting with all required Job 2,52,500.00 Fifty Two Thousand Five

welding, equipments, DG set, tools, scaffolding, Hundred Only

transportation at site as per the requirement and

directed by EIC. ISO Grade Gel coat for First Layer,

carox Pigment As per sculptures color layer 450 GSM

Emulation Matt with Standard GP Resin. Final Color

Coating Standard Auto color, required Heavy Metal

Frame strucrture ect.

WILDLIFE SCULPTURE (Leopard climbing on the

Designing, Providing and erection of Leopard climving

on the trunk with Life size Sculpture. High Grade FRP,

making different initial mould structure using FE

TMT bars and clay mould with hand work by

experienced artists giving all shapes and expression

Rupees Two Lakh(s)

with as approved by EIC and then final FRP FRP ISO

140 1.00 Job 2,52,500.00 Fifty Two Thousand Five

resin, matting, cobalt, catalyst, wax polish and natural

look painting with all required welding, equipments,

DG set, tools, scaffolding, transportation at site as per

the requirement and directed by EIC. ISO Grade Gel

coat for First Layer, carox Pigment As per sculptures

color layer 450 GSM Emulation Matt with Standard GP

Resin. Final Color Coating Standard Auto color,

required Heavy Metal Frame strucrture ect.

PHOTO POINT (I LOVE HAFESHWAR CAMP SITE)

Designing, Providing and erection of total length

mtr. and height 1 mtr. to 0.5 mtr. as per design with

High Grade FRP, making different initial mould

structure using FE 500 TMT bars and clay mould with

hand work by experienced artists giving all shapes and

expression with as approved by EIC and architect then

Rupees Eight Lakh(s)

141 1.00 final FRP ISO resin, matting, cobalt, catalyst, wax Job 8,08,000.00

Eight Thousand Only

polish and natural look painting with all required

welding, equipments, DG set, tools, scaffolding,

transportation at site as per the requirement . ISO

Grade Gel coat for First Layer, carox Pigment As per

sculptures color layer 450 GSM Emulation Matt with

Standard GP Resin. Final Color Coating Standard Auto

color, required Heavy Metal Frame strucrture ect.

Signages and Artifacts

Designing, Supply and Installation of various Signages,

shown in pictures should be erected in sheet with MS

Rupees Thirty Thousand

142 55.00 sctructure of size in 4mm sheet thick, made with S.S. Smt 30,300.00

Three Hundred Only

304 or MS or Aluminium Composite panel with digital

printing on various medium as per approved by EIC or

IRON GATE Design, fabrication and installation of

artistic iron gates using MS materials, powder

Rupees One Lakh(s) One

143 2.00 coated/painted finish, with hardware like hinges, Job 1,01,000.00

latches. Labour charges for fabrication, welding, and

installation are included.

SCHEDULE- B Page

Sr. No. Total Qty Description Unit Rate in Figure Rate in Words

Point wiring for Light/ Bell with 2-1.5 sq.mm & earth

wire of 1.5 sq.mm (Green) both are of ISI marked

KV grade FRLS PVC insulated multi strand copper

wires up to 10 Mtr. length, in below type of pipe

erected with 6A Modular type switch/ bell push &

accessories and earth continuity of following type, Rupees Four Hundred

144 100.00 erected on PVC/ Metallic/ Wooden box, single Pt. 485.81 Eighty Five And Paise

mounting base frame covered with textured/ metallic/ Eighty One Only

white front plate modules erected on/ in wall/ ceiling

as per pipe erected, with necessary Lamp holder/

ceiling rose/ H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ ceiling complete Cat. III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of

1.5 sq.mm (Green) both are of .ISI marked 1.1 KV

Grade FRLS PVC insulated multi strand copper wires

up to 10 Mtr. length, in below type of pipe erected with

6A Modular type switch and hum free EME step type

electronic fan regulator mounted and accessories with

Rupees Six Hundred

earth continuity of following type erected on PVC/

145 35.00 Pt. 674.68 Seventy Four And Paise

Metallic/ Wooden box, single mounting base frame

Sixty Eight Only

covered with textured/ metallic/ white front plate

modules erected on/ in wall/ ceiling as per pipe

erected. with necessary ceiling rose/ H.D.Connector as

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ ceiling complete Cat-III

Point wiring for Individual Plug with & earth wire of

1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires up to

Mtr. length, in below type of pipe erected complete

with Modular type switch & 5 pin Plug erected on

PVC/ Metallic/ Wooden box covered with appropriate Rupees Five Hundred

front plate modules erected on/ in wall/ ceiling as per Ten And Paise Five Only

pipe erected with following type of accessories.

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu.

Wire from nearby switchboard/ mcb db board

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ ceiling completeCat-III

Point wiring for on board Looped Plug with 6A

Modular type switch & 5 pin socket erected on PVC/

Rupees Two Hundred

Metallic/ Wooden box, single mounting base frame

147 40.00 Pt. 257.55 Fifty Seven And Paise

covered with textured/ metallic/ white front plate

Fifty Five Only

modules erected on / in wall/ ceiling with following

type accessories. Cat.III

Providing following type of Modular Type Accessories

mounted with PVC/ Metallic/ Wooden box, single

mounting base frame covered with textured/ metallic/ Rupees One Hundred

148 25.00 white front plate, modules erected with necessary Pt. 180.79 Eighty And Paise

connections as per site situation directed by Engineer Seventy Nine Only

(9) 16 Amp. SP one way switch Cat.III

SCHEDULE- B Page

Sr. No. Total Qty Description Unit Rate in Figure Rate in Words

Providing following type of Modular Type Accessories

mounted with PVC/ Metallic/ Wooden box, single

mounting base frame covered with textured/ metallic/ Rupees One Hundred

149 30.00 white front plate, modules erected with necessary Pt. 199.98 Ninety Nine And Paise

connections as per site situation directed by Engineer Ninety Eight Only

(10) 6/ 16Amp. Universal socket Cat.III

Point wiring for Tissino / Modular secondary light

point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires, in below type of

pipe to be erected complete with earth continuity and

necessary connection with primary light with Rupees One Hundred

150 70.00 accessories erected on Metal / PVC / wooden box Pt. 167.66 Sixty Seven And Paise

covered with 3 mm thick PC(Polycarbonate) / Acrylic Sixty Six Only

sheet for open / concealed wiring. with necessary

Lamp holder / ceiling rose / H.D.Connector as

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ ceiling complete Cat-III

Providing following type of Modular Type Accessories

mounted with PVC/ Metallic/ Wooden box, single

mounting base frame covered with textured/ metallic/

Rupees One Hundred

white front plate, modules erected with necessary

151 10.00 Nos. 160.59 Sixty And Paise Fifty

connections as per site situation directed by Engineer

(3) Two Pin/ RJ-11 Telephone Socket [A] For One

Rupees One Hundred

(4) TV Co-axial Socket outlet

152 10.00 Nos. 160.59 Sixty And Paise Fifty

(7) Blank Plate Single Rupees Twenty Five And

Cat-III Paise Twenty Five Only

Rupees One Hundred

(8) Modem Jack for Computer Open RJ-45

154 25.00 Nos. 160.59 Sixty And Paise Fifty

Rupees Three Hundred

155 10.00 (19) Modular Indicating Call Bell Cat.III EA 329.26 Twenty Nine And Paise

Twenty Six Only

Rupees One Hundred

(20) Modular Buzzer Cat.III

156 10.00 EA 149.48 Forty Nine And Paise

Forty Eight Only

Conduits & Pipes

Providing and erecting ISI mark Medium class RIGID

PVC PIPES of following size complete to be erected on/

Rupees Twenty Four

in wall or ceiling erected with necessary PVC fittings &

157 800.00 Mtr. 24.24 And Paise Twenty Four

Junction boxes fixed with adhesive solution & Clamps

with following dia of pipes, in approved manner as

Rupees Thirty Three

158 750.00 b) 25 mm Mtr. 33.33 And Paise Thirty Three

Rupees Fifty Four And

Paise Fifty Four Only

SCHEDULE- B Page

Sr. No. Total Qty Description Unit Rate in Figure Rate in Words

Providing and erecting Mains with 1.1 KV grade FRLS

PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected concealed

in/ flushed on wall/ ceiling, with 1.5 sq. mm copper Rupees Sixty Two And

conductor FRLS PVC insulated stranded wire of green Paise Sixty Two Only

colour for earth continuity of following size

(a) with medium class Rigid PVC pipe and accessories

(a) 2 wire 1.5 sq. mm

Providing & Erecting approved make following size of

TV Co-axial flexible cable comprising inner conductor

of solid bare copper insulated with Foam PE &

Rupees Thirty Nine And

161 350.00 Secondary conductor made of poly- Aluminium film Mtr. 39.39

Paise Thirty Nine Only

bonded Al. Braids @ suitable coverage overall

sheathed with black PVC insulation.

Supplying & erecting Delton or approved make

Telephone Cable electrolytic copper conductor PE

insulation twisted in two pairs, & wrapped with FRLS

PVC tape & sheathed with FRLS PVC or HFFR outer

Jacket suitable for telephone wiring & confirming to C-

Rupees Twenty And

162 350.00 DOT erected in existing pipe. of following size of Mtr. 20.20

Paise Twenty Only

conductors & Nos..of pairs. With necessary

A. Conductor Size 0.5 mm

(a) (2) Unarmoured

Providing & erecting Switch board for Computer or

electric apparatus consisting of following modular

type accessories mounted with PVC / Metallic

concealed/ open box with single mounting base frame

Rupees One Thousand

covered with textured/ metallic/ white front

One Hundred Thirty

163 25.00 plate,modules erected with necessary connections as Pt. 1,133.22

Three And Paise Twenty

1 no. 6A/ 16A universal plug-switch combined.

3 Nos.. 6A Switch

3 Nos.. 6A 5 pin Plug

For Modular Type Accessories cat iii

Supplying & erecting approved make LAN cable of

Rupees Forty Seven And

164 550.00 following size in existing pipe as per direction Mtr. 47.47

Paise Forty Seven Only

Providing & erecting main Distribution (MDF) indoor Rupees Nine Hundred

165 4.00 type, back mounted frame Nos. 994.85 Ninety Four And Paise

(a) Suitable for 10 pair Eighty Five Only

Providing and erecting XLPE (IS:7098)(I)-88 ISI

armoured cable multistrand Aluminium conductor for Rupees One Hundred

166 550.00 1.1 KV. to be laid on wall with necessary clamps or in Mtr. 153.52 Fifty Three And Paise

existing trench / pipe of following size of cables Fifty Two Only

d) 4 Core 16 Sq.mm.

Rupees One Hundred

167 1,000.00 c) 4 Core 10 Sq.mm. Mtr. 140.39 Forty And Paise Thirty

ARMOURED COPPER CABLES.

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Copper conductor for 1.1 Rupees Three Hundred

168 40.00 KV. to be laid on wall with necessary clamps or in Mtr. 395.92 Ninety Five And Paise

existing trench / pipe at road crossing or floor of Ninety Two Only

following size of cable.

b) 3 Core 6 Sq.mm.

SCHEDULE- B Page

Sr. No. Total Qty Description Unit Rate in Figure Rate in Words

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand/ Solid Copper conductor

Rupees Three Hundred

for 1.1 KV. to be laid on wall with necessary clamps or

169 800.00 Mtr. 364.61 Sixty Four And Paise

in existing trench / pipe at road crossing or floor of

following size of cables.

(B) 4 core 4 Sq. mm

Making trench in soft soil of suitable width of 90 cms

Rupees Fifty Five And

170 800.00 deep for laying cable or locating the fault all over the Mtr. 55.55

Paise Fifty Five Only

run and back filling the same and making the surface

as a normal ground.

Drilling the road without breaking the road surface

(Asphalt) for laying of cable for feeding power supply Rupees Four Hundred

171 100.00 by making upto 150mm dia. size of holes at both ends Mtr. 492.88 Ninety Two And Paise

complete. Eighty Eight Only

(A) Up to 100 mm bore dia

Providing and erecting iron clad cable route marker

Rupees Two Hundred

duly marked with ELE.CABLE of size 23 cms.X 12 cms.

172 20.00 Nos. 240.38 Forty And Paise Thirty

Flushed with ground in cement foundation as directed

by Engineer incharge.

Providing & laying approved make Double walled

corrugated pipes (DWC) of polyethylene (conforming

to IS 14930 II) with necessary connecting accessories

Rupees Sixty Two And

173 1,000.00 of same material at required depth in existing trench Mtr. 62.62

Paise Sixty Two Only

for laying of cable. below ground / road surface for

enclosing cable

(A)50 mm outer dia

Providing & laying approved make Double walled

corrugated pipes (DWC) of polyethylene (conforming

to IS 14930 II) with necessary connecting accessories Rupees One Hundred

174 200.00 of same material at required depth in existing trench Mtr. 137.36 Thirty Seven And Paise

for laying of cable. below ground / road surface for Thirty Six Only

enclosing cable

(D)120 mm outer dia.

Providing and, fixing heavy duty flange type brass

cable gland with rubber ring for PVC insulated Rupees Thirty Eight And

armoured cable complete with out going tails, Paise Thirty Eight Only

insulating tape etc for following size of cables.

(C) 2 to 4 core 10 Sq. mm

Rupees Forty Seven And

176 20.00 d) 2 to 4 Core 16 Sq.mm Nos. 47.47

Paise Forty Seven Only

Solder less crimping type Aluminium lugs conforming

to IS suitable for cable of following size evenly

Rupees Thirteen And

177 100.00 crimped with high pressure tool & connected to Nos. 13.13

Paise Thirteen Only

switchgear terminals with brass/ cadmium plated nut

bolts in an approved manner.

Rupees Fifteen And

Paise Fifteen Only

MINIATURE CIRCUIT BREAKERS.

Miniature circuit breaker single pole 6A to 32A

Rupees One Hundred

suitable to operate on 240 V A.C. system and having

179 50.00 Nos. 112.11 Twelve And Paise

breaking capacity 10 KA to be erected in existing box.

confirming to IS 8828/ 1996 with ISI Mark

SCHEDULE- B Page

Sr. No. Total Qty Description Unit Rate in Figure Rate in Words

Providing & erecting 240 V MCB double pole switch for

lighting Load (B Curve) having 10 KA breaking Rupees Two Hundred

180 20.00 capacity & confirms to IS : 8828 in existing box having Nos. 278.76 Seventy Eight And Paise

following capacity Seventy Six Only

(A) 6 to 32 Amp. Cat-III

Providing & erecting 415 V MCB Four Pole for Motor &

Inductive Load (C Curve) having 10KA breaking Rupees Seven Hundred

181 20.00 capacity & confirms to IS :8828 in existing box having Nos. 737.30 Thirty Seven And Paise

following capacity Thirty Only

(c)63 Amp. Cat.III

Providing & erecting 415V MCB Four Pole Switch for

Lighting Load (B curve) having 10KA breaking Rupees Six Hundred

182 20.00 capacity & confirms to IS :8828 in existing box having Nos. 638.32 Thirty Eight And Paise

following capacity Thirty Two Only

(b)40 Amp. Cat.III

Providing and erecting Sheet Steel powder coated

MCB distribution board- flush/ surface mounted fitted

with busbar, neutral link, earth bar and DIN rail,

confirming to IS 13032 and BS 5486-1986 without Rupees Three Thousand

MCB to house appropriate Nos.. of MCBs.(The DBs Four Hundred Twelve

should be used of same company of MCB to be used) And Paise Seventy Nine

(B) three phase incoming and single phase horizontal Only

type outgoing Per phase isolation type (PPI) (b) sheet

steel double door

Providing and erecting Sheet Steel powder coated

MCB distribution board- flush/ surface mounted fitted

with busbar, neutral link, earth bar and DIN rail,

Rupees One Thousand

confirming to IS 13032 and BS 5486-1986 without

Four Hundred Ninety

184 4.00 MCB to house appropriate Nos.. of MCBs. (The DBs Nos. 1,492.78

Two And Paise Seventy

should be used of same company of MCB to be used)

(A) single phase incoming and horizontal single phase

outgoing (b) sheet steel double door

EARTH LEAKAGE CIRCUIT BREAKERS.

providing and erecting Approved make RCCBs

conforming to IS: 12640 and having sensitivity of

mA and Short Circuit withstand capacity of 10 KA and

Rupees Two Thousand

suitable for operation on single phase 240 V,50Hz.

Two Hundred Thirty

185 15.00 having characteristic of quick action & tripping with all Nos. 2,235.13

Five And Paise Thirteen

advance feature & do not incorporate any electronic

component. for following Max. rating erected as

(ii) 40Amps. DP

Rupees Two Thousand

Six Hundred Fifty Four

186 6.00 (iii) 63 Amps. DP Cat-III Nos. 2,654.28

And Paise Twenty Eight

Providing and erecting Approved make RCCBs

conforming to IS: 12640 and having sensitivity of

mA and Short Circuit withstand capacity of 10 KA and

suitable for operation on 3 phase and neutral Rupees Three Thousand

187 6.00 415V,50Hz. having characteristic of quick action & Nos. 3,040.10 Forty And Paise Ten

tripping with all advance feature & do not incorporate Only

any electronic component for following Max. rating

erected as directed.

(iii) 63 Amps. FP CAT III

SCHEDULE- B Page

Sr. No. Total Qty Description Unit Rate in Figure Rate in Words

Providing and erecting metallic vitrified danger notice

board as per language suggested by engineer incharge Rupees Sixty Nine And

for MEDIUM VOLTAGE installation to be erected as per Paise Sixty Nine Only

Providing and erecting Approved make Four pole

moulded case circuit breaker having breaking capacity

ICU of 35 KA. at 415 V. having Normal current rating Rupees Sixteen

200A.with variable Thermal & magnetic release Thousand Two Hundred

suitable to work on A.C.supply 50 c/ s. with all internal Twenty One And Paise

connections, spreader tinned copper & complete Sixty One Only

erected in existing 16 G.M.S.housing

ICS=100% of ICU only Cat III

Pproviding and erecting Approved make Four pole

moulded case circuit breaker having breaking capacity

ICU of 25 KA. at 415 V,having normal current rating up Rupees Six Thousand

to 25 A to 100A. with Fixed thermal & magnetic One Hundred Seventy

release suitable to work on A.C. supply 50 c/ s. with all Three And Paise Twelve

internal connections, spreader tinned copper & Only

complete erected in existing 16 G.M.S.

housing.ICS=100% of ICU only Cat III

Supplying and erecting triple pole & neutral 440V/

500V panel mounting Copper Busbars with four equal

Nos.. of electrolyte bus having current density not

more than 1.6 Amp./ sq.mm (Rated current/ cross

Rupees Three Thousand

section area) duly wrapped with colour insulating tape

191 6.00 Rmt 3,202.71 Two Hundred Two And

for phase sequence of following current carrying

Paise Seventy One Only

capacity, erected with necessary bus bar supports/

insulators, main cable socket to each bar, erected in

existing cubical panel with necessary connections.

(B) Suitable for 200 Amp. capacity

Providing & erecting weather proof, dust & vermin

proof, floor mounted front operated indoor type

cubical panel board having IP-64 protection made

from 14 SWG thick CRC M.S. sheet for outer body &

doors, 16 SWG thick CRC M.S.sheet for internal

partitions with necessary supporting angles, flats

including cutting, bending, drilling, welding, riveting

with internal partitions & cable alley as per

requirements & instruction of engineer-in-charge with

erection of supplied switch gears, BUSBARS, with

suitable size of inter connecting PVC copper wire/ Rupees Nineteen

copper-aluminium strips, rubber grommets, rib, Thousand Three

192 4.00 bakelite control fuses for measuring instruments, Smt 19,387.96 Hundred Eighty Seven

earth bus & earth bolts, foundation flange- bolts-base And Paise Ninety Six

Plates, sufficient Nos.. of hinged doors, handles with Only

locking arrangement and rubber gasket complete. The

Panel shall be painted with epoxy powder coating.

(The rates excludes the cost of switchgears, bus bars,

inter connecting mains & Copper Aluminium strips,

meters, Fuses etc. The dimension shall be measured

excluding base beams) The panel shall be supplied

with following approved manufacturers with following

(B) The standard companies switch gear shall be used

and only manufacturers at CPRI approved factory

(ii) with 550 mm. Depth

Supplying and erecting approved make suitable panel

Rupees Forty Three And

193 15.00 indicator LED type lamp, lens cover, complete erected Nos. 43.43

Paise Forty Three Only

with necessary connections.

SCHEDULE- B Page

Sr. No. Total Qty Description Unit Rate in Figure Rate in Words

providng and erecting Approved make energy meter

phase 4 wire unbalanced load rating, 10A to 60 Amp.

based on ASIC(Application specific Integral Circuits)

digital technology with accuracy Class- 1, temper Rupees Two Thousand

194 4.00 proof, free from effect of external magnetic field with 3 Each 2,696.70 Six Hundred Ninety Six

phase indication, earth & impulse indication, 6 digit And Paise Seventy Only

electro mechanical impulse counter, suitable work on

120 V to 300V per phase 45-55 HZ, housed in robust

enclosure with erection as directed.

Rupees Two Thousand

providng and erecting Suitable set of CTS for 100A

195 8.00 Each 2,105.85 One Hundred Five And

Paise Eighty Five Only

Supplying and erecting approved make panel

Rupees One Thousand

mounting type Digital Voltmeter having 3 digits LED

Two Hundred Seventy

196 4.00 display, 0 to 750 AC Volts range erected on existing Ea. 1,275.63

Five And Paise Sixty

panel board with all connection, wiring etc .with

manufacturers calibration certificate.

Supplying and erecting approved make panel

mounting type Digital Ammeter having 3 digits LED Rupees One Thousand

display, external CT operated, calibrated for 0 to 1000 Five Hundred Fifty Eight

Amps suitable to operate on 500 Volt AC, erected on And Paise Forty Three

existing panel board with all connection, wiring etc Only

.with manufacturers calibration certificate.

Supplying and erecting Ammeter/ Voltmeter selector Rupees Three Hundred

198 2.00 switch for 3 phase AC Supply 500 V on existing panel Ea. 317.14 Seventeen And Paise

board with necessary connections. Fourteen Only

Supplying & erecting approved make Four Pole 415V Rupees Twenty Two

change over switch interior for panel mounting with Thousand Two Hundred

operating mechanism A.C.23 duty confirming to IS for Fifty Five And Paise

(F)400A cat iii Thirty Five Only

Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat

resistant PVC insulated conforms to IS 694, IEC-

Rupees Thirty Seven

erected in existing pipe of following size (Specifically

200 250.00 Mtr. 37.37 And Paise Thirty Seven

for control panel, relays, power switchgears, motor

starters & control wiring) with required size of copper

lugs, nuts and bolts if required.

(d) One wire 4.00 sq. mm

Rupees Fifty Six And

201 150.00 (e) One wire 6.00 sq. mm Mtr. 56.56

Paise Fifty Six Only

Rupees Ninety One And

202 125.00 (f) One wire 10.00 sq. mm Mtr. 91.91

Paise Ninety One Only

Rupees One Hundred

203 125.00 (g) One wire 16.00 sq. mm Mtr. 142.41 Forty Two And Paise

Rupees Two Hundred

204 125.00 (h) One wire 25.00 sq. mm Mtr. 236.34 Thirty Six And Paise

Thirty Four Only

Providing, erecting, fabricating the M.S. structure as

per requirement on site incorporating proper size of

M.S. angles, flats, bars, channels, sections complete

Rupees Seventy Seven

with cutting, welding, grinding & finishing duly

205 200.00 Kg. 77.77 And Paise Seventy Seven

painted with one coat of red oxide with erection on

site as per direction of engineer in charge with

necessary grouting, cementing, plastering & finishing

SCHEDULE- B Page

Sr. No. Total Qty Description Unit Rate in Figure Rate in Words

CEILING FANS AND ACCESSORIS.

Providing & erecting Approved make Power Saving

Watt Ceiling Fan with double ball bearing ISI mark Rupees One Thousand

with Condenser 230 volt A.C. 50 Hz 1200 mm sweep Nine Hundred Forty

complete having 3blades with aluminium blades with, Eight And Paise Twenty

canopy & 30 cm. down rod erected with Nine Only

earthing.(Make shall be approved by Engineer in

FAN ACCESSORIES.

Supplying and erecting 19/ 20 mm. nominal bore Rupees One Hundred

207 10.00 Medium Class M.S. Pipe down rod erected duly painted Mtr. 108.07 Eight And Paise Seven

for fan complete with necessary 24/ O.2, 3 core Only

flexible wire with earthing.

Supplying & erecting Fan Hook of 10 mm M.S.

Rupees Forty Three And

208 35.00 Roundbar grouted in RCC slab with Making the site as Nos. 43.43

Paise Forty Three Only

Supplying & erecting fan hook box of 10 mm M.S.

round bar bounded to the RCC bars up to 50mm length Rupees One Hundred

209 35.00 each side and pierced through a 16 Gauge M.S. box/ Nos. 108.07 Eight And Paise Seven

Heavy Duty PVC box complete erected concealed in Only

Ceiling with necessary finishing..

Providing Fan clamp of 30 x 5 mm flat of required

Rupees Ninety Eight And

210 35.00 length & 10 mm M.S. Bolt & Nuts erected with Nos. 98.98

Paise Ninety Eight Only

necessary hook of 10 mm M.S. Round Bar.

Providing 2.5mm.thick laminated acrylic sheet to Rupees Eighteen And

cover the fan hook or Fan box. Paise Eighteen Only

TABLE FANS, EXHAUST FANS & ACCESSORIES.

Rupees One Thousand

Supplying & erecting approved make low noise

Seven Hundred Three

212 15.00 decorative exhaust fan having size 200mm with 1350 Nos. 1,703.87

And Paise Eighty Seven

RPM with square frame ABS body with inbuilt lowers

& square frame.

Supplying and erecting approved make oscillating type

Rupees Two Thousand

bracket fan A.C. 23OV. 50cy/ s 400/ 450 mm sweep

Five Hundred Thirty

213 1.00 wall mounted with height adjustment and rotary Nos. 2,534.09

Four And Paise Nine

tilting device complete with guard, flexible Core plug

top complete erected with lead wires as directed.cat iii

Supplying and erecting LED indoor fittings with LEDs

of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made

of thick sheet Steel conforming to IS: 513/ CRCA

polyester powder coated and high U.V. & corrosion

resistance with diffuser and/ or Polycarbonate optics

with company mark/ name 120 to 300 V,Power

Factor more than 0.9, THD < 10 %, Rupees Three Hundred

214 150.00 CCT 4000 K to 6500K, Uniformity ratio >0.7, Nos. 373.70 Seventy Three And Paise

Luminaire efficiency> 85 lumens/ watt, Seventy Only

LED driver efficiency > 85 %

CREE/ OSRAM/ PHILIPS Lumileds/ NICHIA/ SEOUL/

Bridgelux(U.S.A.) make LED used for luminaire. (Each

fitting required LM-79 & LM-80 Certificates)

(A) Tube Light with integral/ non-integral driver

(d) 22-24 Watts, Surge- 4KV,IP-20, 4 feet

SCHEDULE- B Page

Sr. No. Total Qty Description Unit Rate in Figure Rate in Words

Supplying and erecting LED indoor fittings with LEDs

of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made

of thick sheet Steel conforming to IS: 513/ CRCA

polyester powder coated and high U.V. & corrosion

resistance with diffuser and/ or Polycarbonate optics

with company mark/ name 120 to 300 V,Power

Factor more than 0.9, THD < 10 %, Rupees Four Hundred

215 30.00 CCT 4000 K to 6500K, Uniformity ratio >0.7, Nos. 427.23 Twenty Seven And Paise

Luminaire efficiency> 85 lumens/ watt, Twenty Three Only

LED driver efficiency > 85 %

CREE/ OSRAM/ PHILIPS Lumileds/ NICHIA/ SEOUL/

Bridgelux(U.S.A.) make LED used for luminaire. (Each

fitting required LM-79 & LM-80 Certificates)Square/

Circular Surface/ Recessed Mounted Downlight/

Hanging with provision for spring loaded mounting

clips complete.(b) 11-15 watts, Surge-4 KV Cat III

Supplying and erecting LED indoor fittings with LEDs

of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made

of thick sheet Steel conforming to IS: 513/ CRCA

polyester powder coated and high U.V. & corrosion

resistance with diffuser and/ or Polycarbonate optics

with company mark/ name 120 to 300 V,Power

Factor more than 0.9, THD < 10 %, Rupees Three Hundred

216 30.00 CCT 4000 K to 6500K, Uniformity ratio >0.7, Nos. 312.09 Twelve And Paise Nine

Luminaire efficiency> 85 lumens/ watt, Only

LED driver efficiency > 85 %

CREE/ OSRAM/ PHILIPS Lumileds/ NICHIA/ SEOUL/

Bridgelux(U.S.A.) make LED used for luminaire. (Each

fitting required LM-79 & LM-80 Certificates)

(H) Mirror Light 9 Watts, wall mounted minimum

Rupees Seventy Seven

Providing and erecting HOT deep Galvanised iron strip

217 50.00 Kg. 77.77 And Paise Seventy Seven

wire 8 to 16 S.W.G.

Pipe type earthing with 40 mm dia 2.5 Mtr. long 'B'

Rupees Eight Hundred

grade G.I. pipe with necessary coupling buch buried in

218 25.00 Ea. 823.15 Twenty Three And Paise

specially prepared earth pit & G.I. earth wire of 8 SWG

erected & connected as directed

Rupees One Hundred

For using salt and charcoal/ coke as required for pipe

219 1.00 Ea. 171.70 Seventy One And Paise

SCHEDULE- B Page

Sr. No. Total Qty Description Unit Rate in Figure Rate in Words

Supplying & erecting in earthpit of minimum bore dia.

225mm size approved make Safe Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 80 mm having 80-200 Micron

galvanising, Inner pipe dia of 40 mm having 200-250

Micron galvanising, connection terminal dia of 14 mm

with constant ohmic value surrounded by highly

conductive compound with high charge dissipation Rupees Ten Thousand

suitable for following type of applications with Five Hundred Ninety

chamber and heavy duty cover.(approved make OEM Three And Paise Eighty

has to submit test certificate including value of earth Nine Only

resistane of installation.

[C] For Electrical Installation covering Transformer

Neutrals, Lightning arrester Earthing, A.C.Plant &

Sensitive Computer System(like Automation,

SCADA)i.e. independent Earthing located in other than

normal soil i.e. Soft Rock, Marshy Soil etc.

-Length of Pipe : 3 Mtr.s.

-Back filling Compound :2 Nos. Bags of 25 Kg.

Providing and erecting required size HOT deep Rupees Seventy Seven

221 200.00 Galvanised iron strip for earthing of H.T., OCB/ ACB/ Kg. 77.77 And Paise Seventy Seven

Transformer LT panel board, Motors etc. using proper Only

Rupees Seven Hundred

Providing and erecting Annealed bare Copper wire

222 50.00 kg 794.87 Ninety Four And Paise

Eighty Seven Only

Supplying & erecting Galvanized M.S pipe post “B”

class 88.9 mm O.D 6 Mtr. Long duly painted with two Rupees Four Thousand

223 40.00 coats of aluminium paint complete with metallic base- Ea. 4,440.97 Four Hundred Forty And

plate of 300 mm x 300 mm x 4mm thick for using as a Paise Ninety Seven Only

compound light pole with approx. weight 47 Kg.

Supplying, erecting, testing, commissioning approved

make M.S. Polygonal High Mast Pole having following

general Specification.

(a) Polygonal Section fabricated from M.S. Plate

confirms BSEN 10025 & Hot deep galvanized

minimum 65/ 86 micron (as per IS 2629/ 1985)

Lantern carriage with ring and rubber lines for

erection of luminaries of suitable site.

(b) Maximum telescopic section not more than four

(c) Double drum gear pipe motorized winch with 6mm

dia S.S. Rod (For 16 Mtr. and above size)(d) Approved

make L.E.D. aviation light = 1 No. ightening arrestor =

1 No. with necessary wiring of 2.5 sq.mm 5 core ISI Rupees One Lakh(s)

copper cable Unarmoured.(e) Bottom most section Forty One Thousand Six

suitable for mounting reversible motor and Hundred Sixteen And

switchgears having door not more than 1400mm x Paise Fourteen Only

300mm with waterproof gasket & hinges & locking

arrangement.(f) Pole structure comprises suitable size

of reversible motor, cable and necessary switchgears

with control panel. (g) bottom section shall have

suitable size of thickness supports ribs foundation

bolts nuts etc.(h) Item not comprises the cost of

lanterns.(i) Necessary Cement Concrete foundation as

per IS including testing & commissioning of the entire

structure for following size of High Mast poles

[1] High Mast 12 Mtr. TOP A/ F 105 mm, BOTTOM A/ F

360mm, No. of Sec. No.- 1, Bottom Thickness- 3 mm,

Size of Base Plate- Dia 520 mm x 20 mm thick,

SCHEDULE- B Page

Sr. No. Total Qty Description Unit Rate in Figure Rate in Words

Providing M-20/ 1:2:4 cement concrete foundation &

70 % PCC from bottom including excavation for the

pole of size 45 x 45 x 100 cms. Deep in below ground

Rupees Eight Hundred

225 60.00 level with plinth of 45 cms x 45 cms (or 45 cms dia x Ea. 809.01

Nine And Paise One Only

45 cms) high upper ground level with necessary curing

and finishing in approved manner.

( for 4 & 6 Mtr. pole)

STREET LIGHT BRACKETS.

Providing street light pole bracket consisting of Light

Class MS.pipe of 4.2 cms. outside dia. complete with

suitable M.S. sleeve tubing of approximate 45 cms. and

length suitable for 76.5 mm/ 80mm./ require size pole

top having sufficient fastners for fixing the brackets Rupees Five Hundred

226 60.00 and having spread of 1 Mtr. length with suitable rise as Ea. 561.56 Sixty One And Paise Fifty

per site condition & suitable welded stiffener reducer Six Only

and nipple with check nut complete painted with one

coat of Red oxide/ PU base primer and two coats of

Aluminium/ PU paint. paint with following Nos. of

[A] Single Arm bracket 1 Mtr.

STREET LIGHT BRACKETS.

Providing street light pole bracket consisting of Light

Class MS.pipe of 4.2 cms. outside dia. complete with

suitable M.S. sleeve tubing of approximate 45 cms. and

length suitable for 76.5 mm/ 80mm./ require size pole

top having sufficient fastners for fixing the brackets Rupees Seven Hundred

227 15.00 and having spread of 1 Mtr. length with suitable rise as Ea. 758.51 Fifty Eight And Paise

per site condition & suitable welded stiffener reducer Fifty One Only

and nipple with check nut complete painted with one

coat of Red oxide/ PU base primer and two coats of

Aluminium/ PU paint. paint with following Nos. of

[B] Double Arm Bracket 1 Mtr

Supplying and erecting LED street light/ Flood light

fittings with High power White LEDs wattage of 1Watt

and above assembled on single MCPCB, efficiency

more than 130 lm/ w and corrosion free High pressure

die cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser

and Polycarbonate optics/ lenses with company

mark/ name engraved or embossed 120 to

V,Power Factor more than 0.95, THD < 10 %, CCT

Rupees Eight Thousand

Uniformity ratio >0.45, Luminaire efficacy>

Four Hundred Fifty

228 40.00 lumens/ watt . LED driver efficiency > 85 %.CREE/ Ea. 8,453.70

Three And Paise Seventy

OSRAM/ PHILIPS Lumileds/ NICHIA/ SEOUL/

BridgeLux (U.S.A.) make LED used for luminaire. (

fittings required LM-79 & LM-80 certificates)(NOTE:

Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges

(B) Flood Light (IP-65), Surge-4KV,Light must have

440VAC line supply protection. It should withstand

hours for 440VAC line supply

(v) above 120 to 160 watts

SCHEDULE- B Page

Sr. No. Total Qty Description Unit Rate in Figure Rate in Words

(c) LED Bollard fittings of minimum height 1000 mm &

dia.100mm having polycarbonate clear/ milky diffuser

mounted on 3mm thick aluminium finished powder Rupees Five Thousand

229 35.00 coated pipe with base plate 160x160mm with erection Ea. 5,262.10 Two Hundred Sixty Two

by M8x75mm fastner with required RCC And Paise Ten Only

foundation.IP65 for 9 to 20 watt and above,surge-4kv

Supplying and erecting LED street light/ Flood light

fittings with High power White LEDs wattage of 1Watt

and above assembled on single MCPCB, efficiency

more than 130 lm/ w and corrosion free High pressure

die cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser

and Polycarbonate optics/ lenses with company

mark/ name engraved or embossed 120 to

V,Power Factor more than 0.95, THD < 10 %, CCT

Rupees Three Thousand

Uniformity ratio >0.45, Luminaire efficacy>

Three Hundred Forty

230 70.00 lumens/ watt . LED driver efficiency > 85 %.CREE/ Ea. 3,345.12

Five And Paise Twelve

OSRAM/ PHILIPS Lumileds/ NICHIA/ SEOUL/

BridgeLux (U.S.A.) make LED used for luminaire. (

fittings required LM-79 & LM-80 certificates)(NOTE:

Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges

(A) Street Light (IP-65), Surge protection-4KV integral

and,Light must have 440VAC line supply with over-

voltage protection.

(i) above 36 to 48 watts CAT III

Providing & erecting open well horizontal mono block

pump set with cast iron body, complete for three

Rupees Eighteen

phase submersible motor having

231 2.00 [D] For 5 HP 3 phase open well horizontal mono block EA 18,746.61

Hundred Forty Six And

pump set suitable for 1350 LPM to 310 LPM @ 10 to

Paise Sixty One Only

42 Mtr. head suitable for 50/ 65 mm dia delivery pipe

Supplying and erecting Direct On-line Electronics

Starter with 2-5/4-10/8-14/10-16 Amp. Rating relay

(variable current setting) directly operated in totally

insulated elegant enclosure and 18 Amp. Rating power

relay with start- stop button for single phase operation

Rupees One Thousand

up to 3 HP as per complete erected on P.W. Block with

232 2.00 EA 1,603.88 Six Hundred Three And

following features.

Paise Eighty Eight Only

Low voltage cut off below 140 V

High voltage cut off above 280 V

Overload protection

Indicating LEDs for motor on lv, hv & overload

tripping. [Cat.II]

Providing & erecting water cooler having storage

capacity 150 Ltr. & cooling capacity 150 Ltr.per hour

@ an ambient temp of 45˚ C. The outlet temp. of the

water should drop by 15˚C within a hour, The water Rupees Fifty Five

cooler should be comprising of hermetically sealed Thousand Eight

compressor, fan motor, condensing unit, water tank Hundred Ninety Three

surrounded by evaporating, coil, thermostats, relay And Paise Forty Only

etc.complete with necessary inlet & outlet connection.

The body of water cooler will be made from Stainless

Rupees Five Thousand

Supplying and erecting water filter cum purifier with

Four Hundred Twenty

234 2.00 ultra violate technology. (Aquaguard/ waterdoc model Ea. 5,424.71

Four And Paise Seventy

or equivalent symphony/ crystal/ videocon model)

SCHEDULE- B Page

Sr. No. Total Qty Description Unit Rate in Figure Rate in Words

Supplying & erecting 5 stage single reverse osmosis

water purification system with M.S. powder coated

frame, prefilter housing with 'O' ring presediment

Rupees Twenty Nine

filter GAC filter, carbon filter suitable buster DC pump

Thousand One Hundred

235 2.00 capacity 80 psi, mention with 40 psi inline type post Ea. 29,187.99

Eighty Seven And Paise

carbon filter auto low & high pressure switches with

Ninety Nine Only

following size of storage tank & LPH capacity &

erected as directed [C] 50 Ltr / Hr with 150 psi 2 nos

Supply of Fibreglass Platform Step (A Type) Ladder-

18 FT having following specifications :

Rupees Thirty Five

It should have large fully serrated platform 15” wide

Thousand Five Hundred

236 1.00 20” deep which locks ladder, Aluminium feet with Ea. 35,590.38

Ninety And Paise Thirty

thick rubber tread, top rail guard to serve as a railing,

two pairs of gusset support at the bottom step and All

gussets are heavy duty steel. Capacity : 300 lbs.

Supplying of single phase submersible pump set

suitable for 100 mm size or more dia bore well having

Rupees Seventeen

motor capacity and discharge as under with necessary

Thousand Six Hundred

237 1.00 panel box EA 17,607.33

Seven And Paise Thirty

(b) Motor rating 1.5 HP (16 stage) pump having

capacity of 50 LPM at 60 Mtr. head suitable for 32 mm

dia. delivery pipe Cat II

Supplying and erecting Direct- On- Line Starter with

18 A. rating contactor and with 3.5 Amp. 18A range

Rupees Two Thousand

directly operated in totally insulated elegant enclosure

238 1.00 EA 2,100.80 One Hundred And Paise

for single phase operation up to 3 HP as per IS

complete erected on P.W. Block with necessary

connection. Cat III

Supply, Installation, Testing and Comissioning of 4MP

Fixed Lens Dome Type Camera,

H.265 4MP IR Vandal Proof Dome N/ W Camera,

2.8mm/ 3.6mm, 30M IR, Micro SD, DC12V/ PoE, IP67/

Rupees Nine Thousand

IK10, Basic IVA, 1 / 2.7" CMOS, 2560 × 1440, 0.01 Lux,

Nine Hundred Sixty Five

239 4.00 F1.2, AGC ON; Defog, True Ea. 9,965.67

And Paise Sixty Seven

day/ night, Digital WDR, 3D DNR, HLC & BLC, Triple

streams, Smart codec by ROI, Cyber Security, Basic

intelligent video analytics, NDAA Compliance, UL, CE,

FCC Certified (Including Five year free maintenance

with guarantee)

Supply, Installation, Testing and Comissioning of 4MP

Fixed Lens Bullet Type Camera, H. 265 4MP IR Bullet

N/ W Camera, 3.6mm/ 6mm, 50M, Micro SD, DC12V/

Rupees Nine Thousand

PoE, IP67/ IK10, Basic IVA, 4MP resolution (2560 ×

Nine Hundred Sixty Five

240 16.00 1440), True day/ night, Digital WDR, 3D DNR, HLC & Ea. 9,965.67

And Paise Sixty Seven

BLC, Triple streams, Smart codec by ROI, Cyber

Security Basic intelligent video analytics, NDAA

Compliance, UL, CE, FCC Certified (Including Five year

free maintenance with guarantee)

Supply, Installation, Testing and Comissioning of

Channel Network Video Recorder (NVR), Support

Rupees Sixty Eight

8CH@2MP, H.264 Video Compression, HDMI, VGA

241 1.00 output, up to 4 SATA interface each with max 6 TB Ea. 68,794.13

Hundred Ninety Four

support, bandwidth 200 mbps, CE FCC, BIS, Operating

And Paise Thirteen Only

Temp-10 deg to 50 deg C, USB and serial Interface

(Including Five year free maintenance with guarantee)

Supply Installation Testing and commissioning of

Rupees Eight Thousand

PORT POE SWITCH with required all necessary

242 3.00 Nos. 8,585.00 Five Hundred Eighty

accessories to complete th job.

SCHEDULE- B Page

Sr. No. Total Qty Description Unit Rate in Figure Rate in Words

Rupees Eight Thousand

Supply, installation, testing and commissioning of 9 U

Eight Hundred Seventy

243 1.00 Rack including necessary power mounting and fan Nos. 8,875.88

Five And Paise Eighty

arrangements for mounting CCTV equipments

SITC of 32 Inch 500 NTS Brightness professional

Display with Direct-Type LED, Viewing Angle :

Degree Verti, 178 Degree Hor. Operation 27x7, Native

Resolution 3840 x 2160 (16:9)- UHD, 4 x USB (2 x 2.0, Rupees Twenty Five

244 1.00 1 x 2.0 internal, 1 x Type C), 0-40°C, ≤0.5 W, HTML 5 Ea. 25,250.00 Thousand Two Hundred

Browser Opera (4.9), Yes (internal) IEEE 802.11 a/ b/ Fifty Only

g/ n Dual WiFi certificated, BIS, YES CLASS A 3dB

margin. (Including Five year free maintenance with

Supply Installation Testing and commissioning of 10 Rupees Forty Thousand

kva 3 phase Servo stabilizer for Light operation . Four Hundred Only

Bed Side Table Overall Size : Depth- 450.0 mm Width-

440.0 mm Height- 510.0 mm Material : Body and

drawer panels of Bed side table are made of 18 mm

thick Prelaminated Particle Board. All the exposed

edges are edge banded with 0.8 mm thick PVC edge

banding. Side panels are made of 18 mm thick Rupees Five Thousand

Prelaminated Particle board with imported H.D.F. foil Five Hundred Twenty

wrapped decorative trim Four And Paise Seventy

fixed on to it. Hardware : The high quality hardware Only

used like Roller slides, Hinges, minifix, dowels is of

make Hettich.. Construction : Knock Down

Packets : 1 packet.Finish :. 18 mm thick Prelaminated

Particle Board is in Walnut shade.

Vanity Counter with Mirror Overall Size : Dressing

Depth- 450.0 mm, Width- 440.0 mm, Height-

Panels of Dressing table are made of 18 mm thick

Prelaminated Particle Board .All the exposed edges are

edge banded with 0.8 mm thick PVC edge banding.

Side panels are made of 18 mm thick Prelaminated

Particle board with imported H.D.F. foil wrapped

decorative trims fixed on to it. Mirror panel is made of Rupees Ten Thousand

18 mm thick particle board with 4 mm thick mirror Seven Hundred Six Only

fixed on to it.. Supporting pipe used for fixing the

mirror frame is made of M.S. 25 mm square pipe of

thickness 1.2 mm. The high quality hardware used like

Roller slides, Hinges, minifix, dowels is of make

Hettich.. 18 mm thick Prelaminated Particle Board is in

Walnut shade. Metal pipe is powder coated in shade

Metallic Silver Grey to

thickness of 50 microns(+-10). With Knock Down

SCHEDULE- B Page

Sr. No. Total Qty Description Unit Rate in Figure Rate in Words

Providing and constructing Wardrobe size of

(2100X1500X600)mm Made out of 19 mm thk IS

COMMERCIAL PLY with all vertical/horizontal

external/exposed surfaces to be finished with 1mm

thick laminate finish of approved make and shade and

out side/internal side of shuter use 18mm thk PLY

with 1mm laminate finish of approved shade. All

internal surface shall in 0.8 mm thk laminate and 5mm

miror fixing on front of ward robe as per drawing. All

the lipping mouldings as per the detail shall be

finished with bidding patti and melamine polish.The Rupees Thirty Three

ward robe base shall have plastics buffers. All PLY Thousand Eight

shall be fixed with proper architectural joinery and Hundred Twelve And

with required full thread sheet metal CSK head Paise Seventy Eight Only

screws.Hardware : The high quality hardware used

like Roller slides,... SS pipe, Hinges, minifix, wooden

dowels is of make Hettich.. Lock used for main door is

3 way lock and lock used for drawer is cam lock

Construction..All suppliying,making and assembaling

wardrobe as per detail design,shape as showing in drg

no ( SBLC-IN-01-2.22 ), over all briefing as above.the

rate are including with all material,labour,wastage and

complete as directed by EIC(inside surface finised by

0.8 mm balancing lamminat).

Providing and making Queen Size Bed size

(2200X2100X400)mm made out of 19 mm thk IS303

COMMERCIAL PLY with all vertical/horizontal

external/exposed surfaces to be finished with 1mm

thick laminate finish of approved make and

shade.8mm PLY and wooden sport use inner side of

haderest and make NOTCH in ply as per detail

drawing. provide 38mmX75mm vertical and

horizontal support and 75mmX75mm LEG make out of Rupees Twenty Six

C.P teak wood as per drawing detail.All the lipping Thousand Three

249 4.00 mouldings as per the detial shall be finished with Each 26,347.87 Hundred Forty Seven

bidding patti and melamine polish. The master bed And Paise Eighty Seven

base shall have plastics buffers.All PLY shall be fixed Only

with proper architectural joinery and with required

full thread sheet metal CSK head screws.All

suppliying,making and assembaling bed as per detail

design,shape as showing in drg no ( SBLC-IN-01-2.24 ),

over all briefing as above.the rate are including with

all material,labour,wastage and complete as directed

by EIC(inside surface finised by 0.8 mm balancing

Providing and making Center Table of size

(600X450X400) with top out of 12 mm thk glass with

19 mm thk IS303 COMMERCIAL PLY with all

vertical/horizontal external/exposed surfaces to be

finished with 1mm thick laminate finish of approved Rupees Four Thousand

make and shade .Use 12mm S.S pipe as per Three Hundred Ninety

drawing.PVC buffer use in under tabale.All One And Paise Forty

suppliying,making and assembaling side table as per Eight Only

detail design,shape as showing in drg no ( SBLC-IN-01-

2.09 ), over all briefing as above.the rate are including

with all material,labour,wastage and complete as

directed by EIC.

SCHEDULE- B Page

Sr. No. Total Qty Description Unit Rate in Figure Rate in Words

Providing and making Side Table of size

(450X450X400) with top out of 12 mm thk glass with

19 mm thk IS303 COMMERCIAL PLY with all vertical/

horizontal external/exposed surfaces to be finished

with 1mm thick laminate finish of approved make and

Rupees Three Thousand

shade and Internal surface made out in teak wood as

251 4.00 Each 3,952.13 Nine Hundred Fifty Two

per drawing. Use 12 mm S.S pipe as per drawing. PVC

And Paise Thirteen Only

buffer use in under tabale. All suppliying,making and

assembaling Center table as per detail design, shape as

showing in drg no (SBLC-IN-01-2.10), over all briefing

as above. the rate are including with all material,

labour, wastage and complete as directed by EIC.

providing and supplying Bed mattresh Rupees Seven Thousand

252 4.00 (2200X2100X400)mm size as per site mesuremant. Each 7,904.26 Nine Hundred Four And

Use 40 density 'U' foam. Paise Twenty Six Only

Providing and fixing Curtain (Cotton fabrics of rate of

Rs. 400 per sqmtr + suppot cotton cloth) with

Rupees Eight Hundred

Aluminum rod of dia 40 to 50mm dia with SS rings

253 50.00 Smt 836.28 Thirty Six And Paise

fixed at all the levels and sizes as per the

Twenty Eight Only

manufacturer's specification. Fabric to be approved by

architect. Make : Vista or Equivalent

Providing & Fixing TV Cabinet with 18mm thick

playwood depth 15" with 1.5" thick ledge-made of

18mm plywood use in Carcasse all sides internal

0.8mm laminate & wooden Drawer 2 nos Veneer finish Rupees Twelve

254 4.00 brush finish Profile shutter with 4mm extra clear Nos 12,120.00 Thousand One Hundred

frosted glass & SS Legs The rate also includes for The Twenty Only

rate also includes for all necessary items required to

complete the job as per design /drawing and client/

consultant's instructions.

Providing and making Side Table o+B17f size

(450X450X400) with top out of 12 mm thk glass with

19 mm thk IS303 COMMERCIAL PLY with all vertical/

horizontal external/ exposed surfaces to be finished

with 1mm thick laminate finish of approved make and

shade and Internal surface made out in teak wood as Rupees Six Thousand

per drawing. Use 12 mm S.S pipe as per drawing. PVC Sixty Only

buffer use in under tabale. All suppliying,making and

assembaling Center table as per detail design, shape as

showing in drg no ( SBLC-IN-01-2.10 ), over all briefing

as above. the rate are including with all material,

labour, wastage and complete as directed by EIC.

Providing Center Table of 2'-0" x 2'-0" made of

teakwood framing of barma teak. Made from Wood

finish PU and partially with laminate finish, all the Rupees Six Thousand

256 4.00 edges as directed. Hardware fixtures as per Nos 6,565.00 Five Hundred Sixty Five

specification & detail drawings. (square measurement Only

will be consider of the top surface only). Complete As

per Image and design by Architect.

Providing & fixing wooden Wall Panelling with

laminated surface top on 12mm thick plywood

comercial ISI Mark fixing with decorative texture/wall Rupees Six Thousand

257 60.00 paper as per peoperly fixed with laminated sheets all smt 6,566.01 Five Hundred Sixty Six

exposed wood to be finished with melamine polish as And Paise One Only

per detailed working drawing and instructions of

SCHEDULE- B Page

Sr. No. Total Qty Description Unit Rate in Figure Rate in Words

Providing & Supplying Dining Table with melamine

polished Steam Beech wood structure and laminate /

Rupees Twenty Five

veneer with SS leg insert in the middle as per design

258 8.00 Nos 25,250.00 Thousand Two Hundred

The rate also includes for all necessary items required

to complete the job as per design /drawing and

client/consultant's instructions. [4 persons]

Providing and fixing Wooden Dining Chair Made up of

Indian Teakwood legs, seat, back rest with PU Foam in

seat on 12mm Plywood coverd with superior quality

Rupees Six Thousand

Tapestry/ upholstery as per color approved inclusive

259 32.00 Nos 6,568.03 Five Hundred Sixty Eight

of melamine polishing plastic buffers, with The rate

And Paise Three Only

also includes for all necessary items required to

complete the job as per design/ drawing and

client/consultant's instructions.

STAND ALONE TABLES @ 1500LX750DX750HT, WITH

SIDE STORAGE @ 900LX450DX750HT WITH PED 3 MS

DWR (2B+1F)- FOR CABIN WORKTOP to be made of

25 mm thick Prelaminated particle board with

machine pressed 2.0mm PVC edge band on all sides.

Worksurface HT shall be 750mm MODESTY PANEL @

600HT to be made of 18 mm thick Prelaminated

particle board with machine pressed PVC edge band

on all sides. STRUCTURAL SUPPORT SYSTEM Table

shall be constructed using 50 x 50 mm MS Pipe with

Rupees Twenty Five

caps & levellers for legs & 40 x 40 mm MS Powder

260 1.00 Nos 25,250.00 Thousand Two Hundred

Coated Pipes for cross members with dicast brackets

for best stability. SIDE STORAGE @

900LX450DX750HT to be made of Top in 25 mm thick,

Back in 9 mm thick & rest all in 18mm thick

Prelaminated Partical Board. With PVC Edge band.

Consist of 2 no of Openable Shutter with 1 adjustable

shelf, with SS C-TYPE Handle.PED 3 MS DWR (2B+1F)

WITH LEVELER 406LX459DX680H- to be made of

18mm thick Prelaminated Partical Board. With PVC

Edge band. Consist of 3 no of Metal Drawer set with SS

Providing & Supplying Low Back Chair having Seat &

back cushioned on ply, aluminum die casted PU arms

with cushioned pad, The mechanism of the chair have

following features: 360⁰ revolving type 2.5mm Thk

CRCA seat plate with 3.5mm thk CRCA channel plate

push back Mechanism, Tilt tension adjustable, Single

position locking, Plastic component inside the Rupees Six Thousand

261 1.00 mechanism of Grade- MI 3530 and Epoxy Powder Nos 6,570.05 Five Hundred Seventy

coated 70 Microns with tested 1.2 lacs cycles as per And Paise Five Only

BIFMA Standard The chair have be provided with

pneumatic height adjustment, chrome base Including

upholstered with letherette all materials and labour as

per instruction etc complete or as directed by engineer

in charge. Consist of 3 no of Metal Drawer set with SS C-

SCHEDULE- B Page

Sr. No. Total Qty Description Unit Rate in Figure Rate in Words

Providing and Fixing Service Counter with using

19mm thk commercial plywood finish with approved

1mm thk laminate and Sides vertical of finished in

1mm thk approved laminate front to be in approved

Rupees Six Thousand

laminate finish with wooden under carriage of all

262 1.00 Nos 6,571.06 Five Hundred Seventy

fitting approved make complete as per detail and

One And Paise Six Only

instructions. The rate also includes for all necessary

items required to complete the job as per design

client/consultant's instructions.

Providing & Fixing Reception Manager Table, top

made of 18mm thick best quality ply wood finished

with laminated/veneer coated with poly urithin

Rupees Twenty Five

coating in visible surfaces and melamine polish on rest

263 1.00 Nos 25,250.00 Thousand Two Hundred

of the surfaces as per drawing. Base and side credenza

made out of The rate also includes for all necessary

items required to complete the job as per design

/drawing and client/consultant's instructions.

Providing and fixing of coffee chair with curved

Rupees Six Thousand

wooden framing having knowk down joint and

264 8.00 Nos 6,565.00 Five Hundred Sixty Five

excellent finish quality as per photo or design by

Architect. Approved by Architect / Client.

Provdg. & Fixing low/full height Storage rack ready to

assemble type, self-standing, over hanging or partition

mounted storage system having size 900mm length,

750mm height and 450 mm. depth. Carcass and

shelves: Made from 18mm flat laminated panels of

16mm BWR calibrated ply covered with 0.8 mm High

pressure laminate on both side glued with PUR glue,

0.8mm thick PVC edge bands glued with hot melt Rupees Eight Thousand

265 20.00 Glues. The shelves are connected with body through smt 8,585.00 Five Hundred Eighty

adjustable shelf supports Back Panel: 3mm high Five Only

pressure compact sheet both side laminated hold in

slit formed in the body. Shutters: Made from Flat

laminated Plywood with 1 mm High pressure laminate

on both side glued with PUR glue,with 2 mm thick PVC

edge bands. Shutters should be of sliding mechanisum

as per selection. etc. complete as directed by engineer

Providing and Supplying Three Seater Sofa made from

19mm. thick Prelaminated Board as a base and

support of the seat area as per drawing and back side

of the sofa is also made from 19mm. Thick plywood

make a box with screw and nail used, than 4" U-foam

40 density use in base and back of sofa with 2" thick

super sofa U-foam use adhesive and cover with

selected foam leather, in handle used 1.5" thick U- Rupees Thirty Five

266 1.00 foam andand back side of the sofa also cover with Nos 35,350.00 Thousand Three

0.075 thick U-foam & whole sofa box rest on 25mm. x Hundred Fifty Only

25mm x 3mm. S.S. angle and side and back support by

3/4" 19.5mm guage S.S. pipe fitting as per instruction

of engineer-incharge and consultant. whole sofa box is

rest on s.s. 0.75"dia support as per drawing &

instruction of site Engineer-In-Charge and

Consultant.Three Seater Overall Size:

1950X785X675MM(LXDXH) For Three Seater

SCHEDULE- B Page

Sr. No. Total Qty Description Unit Rate in Figure Rate in Words

Low Back Chair (Staff)

Providing and Supplying a Low Back Chair Heavy Duty

Cushion of 32 Densities and cotton Base Mesh. Seat,

Front side with cotton Mesh and back side with

designer PP material, Metal Base with Chrome

Rupees Six Thousand

Finished and Nylon Twin Wheel Castors according to

267 1.00 Nos 6,565.00 Five Hundred Sixty Five

BIFMA standard for long life and heavy duty, BIFMA

standard tested heavy duties hydraulics for ling life,

fixed PU Arm Rest, Central tilt mechanism and seat

cover common black, back rest colour- Navy Blue/

Black as per instruction of Engineer- In- Charge and

I/We am/are willing to carry out the work at …………………% above/below percent (Should be written in figures ………………………………………

……………) of the estimated rates mentoined above . Amount of my/our tender work out as under .

Estimate amount: Estimate amount:

Put to tender Rs. Put to tender Rs.

Note - 1 All work shall be carried out as per Public Works Department Handbook and other specifications of Division or as directed.

GM\W v! AW]\ H SFD AF\WSFD lJEFUGL 5]l:TSF VG[ l0lJhGGL ALHL BF; lJUT D]HA VYJF ;}RGF 5|DF6[ SZL VF5JFG]\ ZC[X[P

All the columns is Schedule should be filled in ink and the total of the entries in the last column should be struck by the contractor under

GM\W v Z VG];}lRDF\ AWF BFGFGL lJUTM ;CLYL EZJL VG[ K[<,F BFGFGL GM\WMGM ;ZJF/M SZL SMg8=FS8Z[ 5MTFGL ;CL SZJL

Rates quoted include clearance of site (prior commencement of work and at its close) in all respects and hold good for work under all

conditions, site, moisture, weather etc.

GM\W v# 8F\S[,F NZDF\4 :Y/GL sSFDGF VFZ\E[ VG[ 5}~ YFI T[ JBT[ f NZ[S ZLT[ ;FO;}OL SZJFGM ;DFJ[X YFI K[P VG[ T[ NZ TDFD 5lZl:YlT4 :Y/4 E[H4 CJFDFG JU[Z[ C[9/ SFD DF8[ VD,DF\ ZC[XP[

Note - 4 To be continued on additional sheets, if found necessary

GM\Wv$ H~Z H6FI JWFZFGF SFU/M HM0L RF,]\ ZFBJ]\P

Signature of Contractor with Seal

SCHEDULE- B Page