REPAIR REPLACEMENT OF FLOORING FALSE CEILING PLASTERING AND CONNECTED ITEMS IN CERTAIN BLDGS AT JOSHIMATH

Amount

Demolition of cement concrete in ground floor and paving n.exc 15 cm thick (below or above ground level) etc complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.laid,bedded and pointed in any mortar complete all as specified and directed.

Demolition of concrete block walling or RR masonary in cement mortar including all quoins arches pillars etc and pre-cast block walling etc complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc incl raking out joints hacking for key scrubbing down with water complete all as specified and directed.

Dismantling plain corrugated steel sheeting any gauage thickness including Nainital and similar pattern complete all as specified and directed.

Dismantling of ceiling board of any thickness and of any description including cover fillets complete all as specified and directed.

Raking out joints/ pointing in walls for random rubble or polygonal rubble uncoursed or brought up to courses masonary built in Cement or cement lime mortar complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and directed..

M&L for PCC 1:2:4 type B-0 (Using 12.5 mm graded stone aggregates) 25 mm thick as in leveling course ,finished surfaces even and rough to receive floor finish complete all as specified and directed.

M&L for PCC 1:4:8 type D2,(using 40mm graded stone aggregates) as in foundation, filling and mass concrete all as specified and directed.

M&L for Non skid ceramic white tiles (300x300)x7 mm thick in floors etc. set and jointed in neat cement slurry and pointed in white cement and including over screed bed or bedding layer of mortar 15 mm thick laying floor finished in cement mortar 1:6 complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including over screed bed or bedding layer of mortar 15 mm thick laying floor finished in cement mortar 1:6 complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in skirting over and including 10mm thick rendering in CM 1:4 as in backing coat of tiles complete all as specified and directed.

M&L for Vitrified coloured tiles (600x600)x9/10mm thick in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including over screed bed or bedding layer of mortar 15 mm thick laying floor finished in cement mortar 1:6 complete all as specified and directed.

M&L for Vitrified coloured tiles (600x600)x9/10mm thick in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in skirting over and including 10 mm thick plastering in CM 1:4 as in backing coat of tiles complete all as specified and directed.

M&L for glazed ceramic white tiles of size (300x200) x7mm thick over and including 10 mm thick rendering in cement mortar 1:4 as in backing coat for tiles on vertical surfaces, set and jointed in neat cement slurry and pointed in white cement complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 350 x 250 x 7mm/450 x 350 x 7mm thick over and including 10 mm thick rendering in cement mortar 1:4 as in backing coat for tiles on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for providing 75 mm thick cement concrete in 1:3:6 type C-1,(using 20 mm graded aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as specified and directed.

M&L for Prepolished chequered cement concrete tiles 30cmx30cmx25mm thick, set, jointed and pointed and in need cement slurry in floor with grey cement and pigment and including over screed bed or bedding layer of mortar 20 mm thick laying floor finished in cement mortar 1:6 complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

M&L 60mm thick, M-30 Grade Machine pressed precast concrete interlocking paver block any shape and size casted in plastic moulds and compacted on vibratory table confirming to IS 15658-2006 with grey cement and pigment complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregates as in sub base finished rough surfaces to receive top finishing surfaces complete all as specified and directed.

M&L for 50mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregates as in top flooring surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for pre-cast cement concrete block masonary 1:3:6 type C-1 (Using 20 mm graded stone agg) with solid block exc 10 cm in width and setting in CM 1:6 etc complete all as specified and directed.

All as per Srl item No.26 here- in before but except PCC blocks complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in coping including form work complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:6 or fair faces of brick or cement concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:4 or fair faces of brick or cement concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L raised pointing to random or polygonal rubble, uncoursed or brought upto courses with CM 1:4 complete all as specified and directed.

M&L for providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying three coat of white wash complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (Using 20mm graded stone agg) as in lintel upto 1.5 m clear span, cills, steps, seismic and other similar articles ,bed plate copings & hold fast including form work etc complete all as specified and directed.

M&L for preparation of old decorated steel surfaces any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint on roof complete all as per specified and directed.

M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint on roof over a coat of red oxide primer complete all as per specified and directed.

M&L for Preparation of old wooden surface of any description over 10cm width or girth applying one coat of synthetic enamel paint complete all as specified and directed.

S&F rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.confirming to Fe 410-W (Gde- E- 250) quality- A complete all as specified and directed.

S&F for 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugated side lap fixed with L or J type or cranked hook bolts complete all as specified and directed.

S&F for 0.80 mm thick plain,galvanised mild steel sheeting in ridges, hips, valley gutters, drips and straight flashings with grade of zinc coating 275 complete all as specified and directed.

S&F for 0.63mm thick galvanised corrugated mild steel sheeting with grade of zinc coating 275 with two corrugation side lap fixed with L or J type or cranked hook bolts in roof wall etc. complete all as specified and as directed.

All as per item No 43 here-in before but except sheet complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed.

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre etc including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

S&F 6mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screw fixed in ceiling flat or sloping etc complete

M&L for 16-18mm thick granite slab on top of cooking platform and bar counter including cutting polishing rounding on edge etc machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over and including 15mm thick screed bed in CM 1:4. including grinding and polishing complete all as specified and directed.

M/S Swarn Constructions

MS NANDAN SINGH FARSWAN

Ganesh Dimri Construction