SPECIAL REPAIRS TO TOILET BLOCKS (BLDG NO. T-271, T-272, T-274, T-275) AND BATHROOM BLOCKS (BLDG NO. T-273, T-276, T-277) OF FD HOSP AND PROVN OF LED CEILING LIGHTS FITTINGS AND MISC ITEMS INSIDE BLDG NO. T-152 (AMARVEER TAPE YAJO AUDITORIUM) AT ALON

Amount

B/R SERVICES/ WORKS

Demolition Cement Concrete (Un-reinforced) of any description in Ground Floors, Pavings, etc. not exc. 150mm thickness (above or below Ground Level) and Removing Debris, etc. to a Distance not exc. 100.00 Metre, complete all as specified and as directed.

Demolition Cement Concrete (Reinforced) of any description and in any Position not otherwise specifically provided and Removing Debris, etc. to a Distance not exc. 100.00 Metre, complete all as specified and as directed.

Demolition Brick Work or Pre-cast Concrete Block Masonry, built in Cement Mortar and in any Position including all Quoins, Arches and Pillars, etc., complete all as specified and as directed.

Taking down Chowkat or Frame of any description (without Taking Off Shutter from the Frame) not exc. 1.50 Square Metre Each, complete all as specified and as directed.

Taking down/out Unserviceable Rusted/ Worn out Wire Cloth/Netting of any description, fixed with Beads, etc., complete all as specified and as directed.

Dismantling Wrought Iron or Mild Steel Work of any description, complete all as specified and as directed.

Dismantling Plain or Corrugated Steel Sheeting of any gauge and thickness, Seggregating Serviceable Steel Sheeting and keep in Safe Custody for Refixing, complete all as specified and as directed.

Dismantling Wall Panel Boards (Fibre, Pulp, Insulation, etc.) or Insulation Boards/ Slabs/ Blankets of any descriptions including Cover Fillets (if any), complete all as specified and as as directed.

Taking up or down Old Unserviceable GI Pipes/ Steel Tubing 15mm bore (dia) and Fittings/ Connections of any description and from any Situations, complete all as specified and as directed.

Taking up or down Old Unserviceable GI Pipes/ Steel Tubing 20mm bore (dia) and Fittings/ Connections of any description and from any Situations, complete all as specified and as directed.

Taking down PVC (SWR) Pipe, Eaves Gutters and Rain Water Pipe, Soil, Waste and Vent Pipe with Fittings of any description and from any Situations, complete all as specified and as directed.

Excavation in Trenches not exc. 1.50 Metre wide and not exc. 1.50 Metre in Depth for Foundation etc. or for Shafts, Wells, Cess Pits, Manholes, Pier Holes, etc. not exc. 10 Sqm on Plan and not exc. 1.50 Metre in Depth and getting out as in Hard/ Dense Soil, complete all as specified and as directed.

Returning, Filling in including Spreading, Levelling, Watering and Well Ramming in layers not exc. 25 Cm, in Soft/Loose Soil, complete all as specified and as directed.

Removing Excavated Materials (Soils), exc. 250.00 Metre but not exc. 500.00 Metre distance and depositing where directed at a level not exc 1.50 Metre above the Starting Point, complete all as specified and as directed.

M&L Hardcore Broken Stone or Boulders, Gauge not exc. 63mm, deposited, spread and levelled in layers not exc. 15 Cm thick, watered and well rammed to a True Surface, complete all as specified and as directed.

M&L Reinforced Cement Concrete 1:2:4 (20mm graded stone aggregates) in Slabs supported on Walls, Beams and Columns; in Floors, Roofs, Landings Balconies, Canopies, Deck Slabs and in Shelves and the like, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be Measured and Paid for separately under appropriate Items.

M&L Pre-cast Reinforced Cement Concrete 1:2:4 (20mm graded stone aggregates) in Landings, Cover Slabs, Manhole Cover Slabs, etc., Set in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Reinforcement will be Measured and Paid separately under relevant Item(s).

M&L Formwork to Soffits of Suspended Slabs such as Roof Slabs, Floor Slabs, Landings and Similar Works; not exc. 200mm thick (Horizontal or Sloping), etc., Flat, Rough Finished surfaces of Concrete, complete all as specified and as directed.

M&L Pre-cast Cement Concrete Block Masonry with Solid Blocks of Size 300x200x200mm or 300x200x100mm, having Compressive Strength of not less than 100 Kg/ Sq Cm (as per IS-2185) in Cement Concrete 1:3:6 (20mm graded stone aggregates), exc. 10 Cm in Width and Setting in Cement Mortar 1:6, complete all as specified and as directed.

S&F Factory made Solid PVC Door Frame of Size 50x47mm made out of 5.0mm thick Plain Colour (Ivory Shade) PVC Sheet reinforced with Mild Steel Square Tube and fixing in opening as per Specification and Drawing of MES Schedule Part-II, complete all as specified and as directed.

S&F Factory Made Solid Panel PVC Door Shutter 30mm thick (Style) of Frame made out of Mild Steel Tubes for Top & Bottom Rails; Mild Steel Frame shall be covered with Heat Moulded Plain Colour PVC ‘C’ Channel having a PVC Sheet Strip of 20mm width stuck inside with Solvent Cement for Stiles and Plain Colour PVC Sheets for Top Rail, Lock Rail & Bottom Rail on Either Side and as Gap insert for Top Rail & Bottom Rail; Panelling of Plain Colour PVC Sheet to be fitted in the Mild Steel Frame welded/ sealed to the Stiles & Rails with suitable PVC Sheet Beading and joined together with Solvent Cement and Fixing in the Frame at Site as per Specifications & Drawings, complete all as specified and as directed. NOTE : Builders Hardware will be Measured and Paid separately under appro-priate Items.

S&F Aluminium anodised Barrel Tower Bolt of Size 125mm long, Extruded Section, complete all as specified and as directed.

S&F Aluminium alloy, anodised, Sliding Door Bolt 250mm long with Hasp, Staple (Bolt type) and Fixed Clips of Sheet, Cast or Extruded Sections and Fixed Bolts and Sliding Bolts of Extruded Sections or Cast-Aluminium alloy, complete all as specified and as directed.

S&F Stainless Steel Butt Hinge of Size 75mm, complete all as specified and as directed.

S&F Aluminium Handle of Size 125mm, Cast type, anodised, complete all as specified and as directed.

S&F Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples, complete all as specified and as directed.

M&L TMT Bars 10mm dia and Over, Cut to length, Bent to Shape required including Cranking, Bending Spirally for Hooping for Columns, hooking Ends and Binding with and including Mild Steel Wire (annealed) not less than 0.90mm dia, complete all as specified and as directed.

M&L TMT Bars 8.0mm dia, Cut to length, Bent to Shape required including Cranking, Bending Spirally for Hooping for Columns, hooking Ends and Binding with and including Mild Steel Wire (annealed) not less than 0.90mm dia, complete all as specified and as directed.

M&L Rolled Mild Steel Sections in Main and Cross Beams, Hip & Jack Rafters, Purlins where connected to Common Rafters, Running Rails and Guides for Sliding Doors, conforming to Fe-410-W (Gde E-250), Quality 'A', fixed with Angle Cleats or Other Connecting Plates, complete all as specified and as directed.

S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Corrugated Steel Sheet 0.50mm thick Coloured, having Tensile Strength of 550 Mpa in Roof Covering, Cladding to Walls, fixed with Aluminum Self Tapping Screws and Aluminum Washers of suitable Size, complete all as specified and as directed.

M&L Refixing Corrugated or Plain Steel Sheeting (Serviceable Sheet obtained from BOQ Item No. 1.07 here-in-before), fixed with suitable Size Mild Steel Coach Screws and Washers or Aluminum Self Tapping Screws and Aluminum Washers (as ordered), complete all as specified and as directed.

M&L Wall Panel Board 20-25mm thick (as approved) matching with existing Boards, complete all as specified and as directed.

M&L Cement Concrete 1:2:4 (12.5mm graded stone aggregates) 25mm thick in Sub-base for laying of Tiles, etc., Maintaining Level Uniformly, finished Concrete Surfaces Fair and Even, complete all as specified and as directed.

M&L Non-skid Ceramic Coloured Tiles (1st quality and as approved) 7.0mm to 8.0mm thick (Square/ Rectangular), Area of Each Tile exc. 0.11 Sqm but not exc. 0.18 Sqm in Floors, Jointed in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile, laid over and including Cement Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed. NOTE : Cost of Screed Bed will deemed to be included in Quoted Unit Rate.

M&L Cement Concrete 1:3:6 (40mm graded stone aggregates) 75mm thick in Plinth Protection, etc., Laid in Alternate Panels, finished Concrete Surfaces Even and Smoooth without using Extra Cement, complete all as specified and as directed.

M&L Bitumastic Filling comprising 1 Part of Bitumen of Grade 85/25 and 3 Parts of Sand by Weight, complete all as specified and as directed.

M&L Cement Concrete 1:4:8 (40mm graded stone aggregates) 75mm thick in Sub-base to Flooring, etc., complete all as specified and as directed.

M&L Chequered Cement Concrete Tiles 200x200x25mm thick, Set and Jointed in Neat Cement Slurry in Floors and Pointed in Grey Cement, laid over and including 15mm thick Cement Screed Bed in Cement Mortar 1:6, complete all as specified and as directed. NOTE : Cost of Screed Bed will deemed to be included in Quoted Unit Rate.

M&L Rendering (Internal) 10mm thick in Cement Mortar 1:6 on Brick/ PCC Blocks or Concrete Works, finished Plastered Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L Rendering (External) 15mm thick on Bricks/Pre-cast Blocks or Concrete Works consisting in 2 layers, Backing/Under layer of 10mm thick in Cement Mortar 1:4 and Float/Top layer 5.0mm thick in Cement Mortar 1:4 including mixing WPC to Float/Top layer, finished Fair and Even, complete all as specified and as directed NOTE : Integral Water Proofing Compound (WPC) will be Measured and Paid separately under appropriate Item.

Supply only Water Proofing Compound (as approved), conforming to IS:2645-2003, complete all as specified and as directed.

M&L Preparing New Plastered Surfaces of Walls and Applying Three Coats of White Wash, complete all as specified and as directed.

M&L Preparing New Surfaces of Wall Panel Boards of any description, Over 10 Cm Width or Girth, not otherwise described and applying Two Coats of Synthetic Enamel Paint (1st quality/ grade Paint of approved Tint) over a Coat of approved Primer, complete all as specified and as directed.

M&L Preparing Old Treated Surfaces by Complete Removal from Wall Panel Boards of any description, Over 10 Cm Width or Girth, not otherwise described and applying Two Coats of Synthetic Enamel Paint (1st quality/ grade Paint of approved Tint) over a Coat of approved Primer, complete all as specified and as directed.

M&L Preparing Steel and Iron Surfaces of any descriptions, over 10 Cm in Width or Girth and applying Two Coats of Synthetic Enamel Paint (1st quality/ grade Paint of approved Tint) over a Coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

S&F Galvanised Steel Tubing 15mm bore (dia), medium grade, conforming to IS-1239 with all Fittings, fixed to Walls, Ceiling or laid in Floors, complete all as specified and as directed.

S&F Galvanised Steel Tubing 20mm bore (dia), medium grade, conforming to IS-1239 with all Fittings, fixed to Walls, Ceiling or laid in Floors, complete all as specified and as directed.

S&F Bib Tap 15mm bore (dia) Cast Copper alloy, Chromium Plated, Fancy type, with Crutch or Butter-fly Handle, screwed down, screwed for Iron Pipe or for Brass Ferrule and Fixed-in-repairs, complete all as specified and as directed.

S&F Pillar Tap 15mm bore (dia), Cast Copper alloy with Capstan Heads, Chromium Plated, Fancy type, screwed down, high pressure, with or without lettered 'Hot' or 'Cold' with Long screwed Shanks and Fly-nuts, screwed for Iron Pipe and Fixed-in-repairs, complete all as specified and as directed.

S&F Stop Valve 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type, screwed down, high pressure, with Crutch or Butter-fly handle, screwed both Ends for Iron Pipe or for Unions and Fixed-in-repairs, complete all as specified and as directed.

S&F Stop Cock/ Valve 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type, with Long Shank and Cup (Concealed type), screwed down, high pressure, with Crutch or Butter-fly handle, screwed both Ends for Iron Pipe or for Unions and Fixed-in-repairs, complete all as specified and as directed.

S&F Gun Metal Globe/Gate Valve 20mm bore (dia) with Iron Wheel Head, screwed both Ends for Iron Pipe and Fixed-in-repairs, complete all as specified and as directed.

M&L Rotational Moulded Polyethene Water Storage Tank 1000 Litre Capacity, Cylindrical, Vertical with Closed Top, 3 layered, conforming to IS:12701-1996, hoisted and fixed in Position all as specified in MES Schedule and Providing GI Tank Nipple 20mm (02 No. on Each) and Water Supply Connections including Lowering/Taking down Unserviceable Water Storage Tank of any description after disconnecting Water Supply connections, complete all as specified and as directed.

S&F PTMT Ball Valve 20mm bore (dia), having weight not less than 210 Gram, high pressure with Epoxy Coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe and Fixed-in-repairs, complete all as specified and as directed.

M&L Vitreous China White Squatting Pan of size 580x440mm, Orissa Pattern with Integral Foot Rests, PVC (SWR) ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan, Cones, India Rubber (nozzles of WC Pan) incluiding provision of Lime Concrete Bedding and Making Good to Floor/ Distrubed Surfaces and Fixed-in-repairs, complete all as specified and as directed.

S&F PVC Flushing Cistern 10 Litre capacity White, Low Level, Valveless, Syphonic Action type with Inlet, Ball Valve, Float & Handle, and PVC Flush Pipe 32mm bore (dia) for suitable Length, a Pair of Cast Iron Brackets Erecting Stand duly painted including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and Fixed-in-repairs, complete all as specified and as directed.

S&F Vitreous China White Wash Hand Basin 550x400mm in Size, Flat Back including Brass Chromium Plated Waste Coupling/ Fitting 32mm bore (dia) of 80mm Long and PVC Waste Pipe 32mm bore (dia) including a Pair of Cast Iron Brackets Brackets Erecting Stand duly Painted, Cutting and Pinning in Ends and Fixed including Making Good disturbed Surfaces in Cement Mortar 1:3 and Fixed-in-repairs, complete all as specified and as directed.

S&F PVC Connection Pipe 15mm in Size and 450mm in length with PTMT Nuts suitable for connecting with Flushing Cistern, Wash Hand Basin, etc. and Fixed-in-repairs, complete all as specified and as directed.

S&F Corner Glass Shelf of Size 200mm with ABS Brackets, fixing to Wall with Brass Chromoum Plated Screws on Wooden/ PVC Cleats and Fixed-in-repairs, complete all as specified and as directed. MAKE : PRAYAG, Model : ABS BRACKETS, Cat No. BEA-48 or equivalent Model in Approved Make.

S&F Tubular Towel Rail 20mm dia, Brass Chromium Plated, D-type, 60 Cm long between Flanges with Bracket (One Pair), Fixed to Walls with and including Chromium plated Brass Screws and Wooden/ Plastic Cleats and Fixed-in-repairs, complete all as specified and as directed.

S&F Brass Chromium Plated Shower Rose with Shower Arm 125mm, Swival Joint including Fixed to Steel Pipe and Fixed-in-repairs, complete all as specified and as directed.

S&F Chromium Plated Soap Dish, not less than 125mm in Size (as approved), Fixed to Walls with and including Chromium plated Brass Screws and Wooden/ Plastic Cleats and Fixed-in-repairs, complete all as specified and as directed.

S&F PVC (SWR) Floor Trap having Diameter of Outlet 75mm, Plain with Grating including Jointing with Solvent Cement and Fixed-in-repairs, complete all as specified and as directed.

S&F PVC (SWR) Pipe 75mm bore (dia), Single Socketed, in any length with Rubber Ring Joints and Jointing with Solvent Cement, fixing to Walls or laid on Floors, complete all as specified and as directed.

S&F PVC (SWR) Bend 75mm bore (dia), any Radius, etc. and Jointing with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) Vent Cowl 75mm bore (dia) and Jointing with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) Pipe 110mm bore (dia), Single Socketed, in any length with Rubber Ring Joints and Jointing with Solvent Cement, laid in Trenches, complete all as specified and as directed.

S&F PVC (SWR) Bend 110mm bore (dia), any Radius, etc. with Access Door and Jointing with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) Pipe 160mm bore (dia), Single Socketed, in any length with Rubber Ring Joints and Jointing with Solvent Cement, laid in Trenches, complete all as specified and as directed.

M&L Cement Concrete 1:4:8 (40mm graded stone aggregate) in Concrete Bed to PVC (SWR) Pipe of 110mm bore (dia) including Packing Under and Haunching against the Sides of Pipes after they are laid and tested; complete all as specified and as directed. NOTE : Necessary Earth Works will be Measured and Paid for separately under appropriate Items.

M&L Cement Concrete 1:4:8 (40mm graded stone aggregate) in Concrete Bed to PVC (SWR) Pipe of 160mm bore (dia) including Packing Under and Haunching against the Sides of Pipes after they are laid and tested; complete all as specified and as directed. NOTE : Necessary Earth Works will be Measured and Paid for separately under appropriate Items.

M&L Cutting into Existing Manholes for Connecting New Drain Pipes of 160mm (Internal dia), Making Good to Pipe and Rendering, Cutting out Existing Benching for and Forming Branch Channel (½ Round or ¾ Section) in Cement Concrete 1:2:4 (20mm graded stone aggregates), Smooth Finished and Reforming Benching as required, complete all as specified and as directed.

E/M SERVICES/ WORKS

M&L Taking down carefully Point Wiring (Light, Fan, Socket or Power) complete from in any Position including Fixture and Fittings such as Switches, Ceiling Roses, Pendants, Regulators, Sockets but excluding Light Fittings of any descrip-tion, Making Good Disturbed Surfaces of Walls/ Ceillings, etc. in Cement Mortar 1:3 including providing Surface Treatment (White/Colour Washing/Distempering, Painting, etc.) wherever required to match the Existing Finishes, complete all as specified and as directed.

M&L Taking down Unserviceable Sub-main Wiring from PVC Conduit/ PVC Casing Capping of any description, Making Good disturbed surfaces of Walls/ Ceilling, etc. in Cement Mortar 1:3 including providing Surface Treatment (White /Colour Washing, Distempering, Painting, etc.) wherever required to match the Existing Finishes, complete all as specified and as directed.

Taking down Unserviceable Service Connection Cable and Connected Items of any description, complete all as specified and as directed.

M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded single core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn in and including PVC Casing Capping (ISI Marked) of suitable Size (approx 25/32/40mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. complete with PVC Board of suitable Size for accommodat-ing Switches, Sockets, Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE LIGHT/ FAN/ BELL POINT controlled by One 1-way Switch 6 Amp, complete all as specified and as directed.

M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded single core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire for ONE 3 PIN SOCKET 6 AMP POINT on SAME BOARD, complete all as specified and as directed.

M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded single core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn in and including PVC Casing Capping (ISI Marked) of suitable Size (approx 25/32/40mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. complete with PVC Board of suitable Size for accommodat-ing Switches, Sockets, Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE 3/5 PIN SOCKET OUTLET 6 AMP POINT on INDEPENDENT BOARD, complete all as specified and as directed.

M&L Point Wiring with 2.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded single core Copper Conductor Cable with 2.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn in and including PVC Casing Capping (ISI Marked) of suitable Size (approx 25/32/40mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. complete with PVC Board of suitable Size for accommodat-ing Switches, Sockets, Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE 3/5 PIN SOCKET OUTLET 6/16 AMP POINT on INDEPENDENT BOARD, complete all as specified and as directed.

M&L Sub-main Wiring with 2-Run of 2.5 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable and 1-Run of 2.5 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuty Conductor drawn through and including PVC Casing Capping of suitable Size (25/32mm Width), ISI Marked along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. and Making Good Disturbed Surfaces of Walls/ Roofs/ Floors, etc. so as to match with the Existing Finishes, complete all as specified and as directed. NOTE :- (a) Cost of 3-Run of Cable & 1-Run of PVC Casing Capping will deemed to be included in the Quoted Unit Rate and the same will be Mesured as ONE UNIT. (b) Sub-main Wiring will be measured PVC Casing Capping only. Wires required for looping, etc. will deemed to be included in the Quoted UNIT RATE.

M&L Sub-main Wiring with 2-Run of 6.0 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable and 1-Run of 6.0 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuty Conductor drawn through and including PVC Casing Capping of suitable Size (25/32mm Width), ISI Marked along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. and Making Good Disturbed Surfaces of Walls/ Roofs/ Floors, etc. so as to match with the Existing Finishes, complete all as specified and as directed. NOTE :- (a) Cost of 3-Run of Cable & 1-Run of PVC Casing Capping will deemed to be included in the Quoted Unit Rate and the same will be Mesured as ONE UNIT. (b) Sub-main Wiring will be measured PVC Casing Capping only. Wires required for looping, etc. will deemed to be included in the Quoted UNIT RATE.

S&F Switch Piano 6 Amp, Single Pole, Flush type, 1-way, 230 Volt AC and Connecting up, complete all as specified and as directed. NOTE : Old Unserviceable Switch Piano 83 No. obtained from Taking down of Point Wiring will be catered under Schedule of Credit.

S&F Socket Outlet 6 Amp, 3 Pin, 2-in-1, Flush type, 230 Volt AC and Connecting up, complete all as specified and as directed.

S&F Switch Socket Combination 6/16 Amp 3 Pin, 3-in-1, Multi-plug, Flush type, 230 Volt AC, complete all as specified and as directed.

S&F Lamp/ Angle Holder PVC/ Polycarbonate type with Back Plate suitable for Batten Fitting and Connecting up, complete all as specified and as directed. NOTE : Old Unserviceable Lamp/ Angle Holder 41 No. obtained from Taking down of Point Wiring will be catered under Schedule of Credit.

S&F Ceiling Rose 65x50mm, 3 Terminals, Surface Bakelite suitable for 230 Volt AC and Connecting up, complete all as specified and as directed. NOTE : Old Unserviceable Ceiling Rose 21 No. obtained from Taking down of Point Wiring will be catered under Schedule of Credit.

S&F LED Lamp 15 Watt, 230 Volt (as approved) Volt, Self-ballasted and fixing to existing Light Fitting including Taking down/out Unserviceable Lamp (41 No.), complete all as specified and as directed.

S&F LED Bulkhead Luminaires 1x10 Watt including LED Bulb/ Light, Driver, Holder and Connecting up with suitable Length and Size 3 Core Twisted Flexible Copper Conductor Cable including Taking down/out Unserviceable Light Fitting (21 No.), complete all as specified and as directed.

S&F LED Light Fitting 1x12 Watt Surface mounted Rimless Square Downlighter with LED Light, Driver, Holder, etc. and Connecting up with suitable Length and Size 3 Core Twisted Flexible Copper Conductor Cable including Taking down Unserviceable Light Fitting (41 No.), complete all as specified and as directed.

S&F LED Light Fitting 15 Watt, Tuneable, White, Smart Downlighter, Recessed mounted Panel, Aesthetically designed, complete with all Accessories, Pre-wired and Connecting up with suitable Length and Size 3 Core Twisted Flexible Copper Conductor Cable, complete all as specified and as directed. MAKE : HAVELLS, Cat No. LHEBAIPNIZ1W015 or equivalent Model in Make : BAJAJ/ CG/ C&S/ PHILIPS (as approved by GE)

S&F LED Tube Light Fitting 1x20 Watt with 20 Watt Inverter LED Batten with Square Profile and Polycarbonate Channel having Lithium Ion Battery with Charging Time 8 Hour to 10 Hours and Backup Time upto 4 Hours and Connect-ing up with suitable Length and Size 3 Core Twisted Flexible Copper Conductor Cable including Taking down/out Unserviceable Light Fitting (21 No.), complete all as specified and as directed. MAKE : HAVELLS, Cat No. LHEXACP7FN1W020 or equivalent Model in Make : BAJAJ/ CG/ C&S/ PHILIPS (as approved by GE)

S&F TRIM PLUS LED PANEL SQUARE Light Fitting 22 Watt, 3000K, Aestheti-cally designed, Recessed mounted Panel in light weight Plastic body, complete with all Accessories, Pre-wired and Connecting up with suitable Length and Size 3 Core Twisted Flexible Copper Conductor Cable, complete all as specified and as directed. MAKE : HAVELLS, Cat No. LHEBGAP5IZ1W022 or equivalent Model in Make BAJAJ/ CG/ C&S/ PHILIPS (as approved by GE)

S&F SKY LUX PANEL Light Fitting 36 Watt, 2500-6500k, Auto tunable 2'x2' Fitting Enviromentaly Friendly, with entire HCL System with IP-54 Protection, complete with all Accessories, Pre-wired and Connecting up with suitable Length and Size 3 Core Twisted Flexible Copper Conductor Cable, complete all as specified and as directed. MAKE : BAJAJ, Cat No. BZRSQL R 36W LED HCL OD SD or equivalent Model in Make : CG/ C&S/ HAVELLS/ PHILIPS (as approved by GE)

S&F PRISTINE GEN 2 PANEL Light Fitting 45 Watt, 5700K, 2'x2' Fitting, Enviro-mentaly Friendly, New Generation, with CRCA housing crew less frame structure with PMMA Diffuser with IP-54 Protection, complete with all Accessories, Pre-wired aand Connecting up with suitable Length and Size 3 Core Twisted Flexible Copper Conductor Cabl, complete all as specified and as directed. MAKE : BAJAJ, Cat No. BPRF 45W WH SL LED or equivalent Model in Make : CG/ C&S/ HAVELLS/ PHILIPS (as approved by GE)

S&F MCB 6 Amp to 32 Amp, Single Pole, 'B' Curve, 50 Hz, 10 kA, 240 Volt and Connecting up including Taking down/out Unserviceable MCB (14 No.), complete all as specified and as directed.

S&F MCB 10 Amp to 32 Amp, Single Pole & Neutral, 'B' Curve, 50 Hz, 10 kA, 240 Volt and Connecting up including Taking down/out Unserviceable MCB (07 No.), complete all as specified and as directed.

S&F MCB 63 Amp, Triple Pole & Neutral, 'B' Curve, 50 Hz, 10 kA, 240 Volt and Connecting up, complete all as specified and as directed.

S&F Sheet Metal Enclosure for DB's when MCBs to be used 4-way, SPN, 240 Volt, Double Doors, Epoxy Based Powder coated suitable for mounting MCB DP/ SPN as Incomer and MCB SP as Out-goings with 200 Amps rated Bus-bar, Neutral Bar, Earth Bar, Connecting Cable Links and Connecting up including Taking down Unserviceable Sheet Metal Enclosure of any description (07 No.), complete all as specified and as directed.

S&F Sheet Metal Enclosure for DB's when MCBs to be used 12-way, SPN, 240 Volt, Double Doors, Epoxy Based Powder coated suitable for mounting MCB DP/ SPN as Incomer and MCB SP as Out-goings with 200 Amps rated Bus-bar, Neutral Bar, Earth Bar, Connecting Cable Links and Connecting up, complete all as specified and as directed.

S&F Sheet Metal Enclosure for DB's when MCBs to be used 4-way, TPN, 415 Volt, Double Doors, Epoxy Based Powder coated suitable for mounting MCB DP/ SPN as Incomer and MCB SP as Out-goings with 200 Amps rated Bus-bar, Neutral Bar, Earth Bar, Connecting Cable Links and Connecting up, complete all as specified and as directed.

Supply & Laying or Fixing or Passing through Pipe, 1100 Volt grade, Heavy duty Cable with PVC insulated Aluminium Stranded Conductor Served with an inner Sheathing of PVC Tape Armoured with Galvanised Steel Wire or Tape and overall PVC Sheathed, Nominal Cross Section 6.0 Sqmm, 2 Core in Service Connection, complete all as specified and as directed.

Supply & Laying or Fixing or Passing through Pipe, 1100 Volt grade, Heavy duty Cable with PVC insulated Aluminium Stranded Conductor Served with an inner Sheathing of PVC Tape Armoured with Galvanised Steel Wire or Tape and overall PVC Sheathed, Nominal Cross Section 16 Sqmm, 4 Core in Service Connection, complete all as specified and as directed.

Excavating in Trenches, not exc. 1.50 Metre Wide and Depth not exc. 1.50 Metre for Taking out/up and/or Laying of Cables, Pipes, etc., Forming Surfaces to required Foundation, etc. and getting out as in Soft/Loose Soil, complete all as specified and as directed.

Returning, Filling in including Spreading, Levelling, Watering, Well Ramming in Layers not exc. 25 Cm, Providing Heaps along the Route of the Cable, Pipe Line with Surplus Soil in Soft/Loose Soil, complete all as specified and as directed.

Supply & laying Steel Water Tubing 15mm bore (dia), Galvanised, ‘medium grade’ with all Fittings, laid in Trenches or any other situation, complete all as specified and as directed. NOTE : Necessary Earth Work will be Measured & Paid separtely under appro-priate Items.

Supply & laying Steel Water Tubing 20mm bore (dia), Galvanised, ‘medium grade’ with all Fittings, laid in Trenches or any other situation, complete all as specified and as directed. NOTE : Necessary Earth Work will be Measured & Paid separtely under appro-priate Items.

S&F Gun Metal Globe/Gate Valve 15mm bore (dia) with Iron Wheel Head, screwed both Ends for Iron Pipe and Fixed-in-repairs (07 No.), complete all as specified and as directed.

M&L Cutting Cast Iron/ GI Pipes of any Size and bore (dia) and reducing to required Length before Laying and to existing Pipe Lines for Taking up for Branch Connections and Insertion of Specials (as per Site requirment), complete all as specified and as directed. NOTE : Cost of Specials will deemed to be included in the Quoted Unit Rate.

M/s O DARANG ENTERPRISES

Kaushik Enterprises

M/S ARUNACHAL VIKASH

M/S CHAKRA GOHAIN

STANDARD ELECTRIC WINDERS

FREEZCON

jitendra narayan goswami

B S ENTERPRISE

M/S HAZARIKA CONSTRUCTION