Govt. T D Medical College hospital, Vandanam Alappuzha -Urgent repairs to existing fire fighting system (Pump Room and Ground / Yard Area)- Fire Fighting Work

Amount

Fire fighting system

90.17.7.8:Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :150 mm dia

90.17.6.2:Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required.150 mm. Dia

90.17.7.6:Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :80 mm dia

90.14.4:Supply and fabrication conveyance and installation of base frame of panel board using 75 x 40 mm rolled steel channel (ISMC)

90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

14.10:Providing and laying in position reinforced cement concrete 1 :2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required (excluding reinforcement).

90.17.24.3:Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of following sizes as required :150mm dia

90.17.11.6:Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required150 mm dia

90.17.11.5:Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required100 mm dia

90.17.11.4:Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required80 mm dia

90.17.11.1:Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required40 mm dia

90.17.14.7:Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :150mm dia

90.17.14.5:Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :100mm dia

90.17.14.1:Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :40mm dia

OD145912/2023-2024:Supplying, fixing, testing and commissioning of Air Release valve with bronze/gunmetal seat duly ISI marked complete with gaskets

OD145913/2023-2024:Supplying, fixing, testing and commissioning of 25mm Ball valve with bronze/gunmetal seat duly ISI marked complete with gaskets

90.17.22:Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required

16.8:Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required

OD145917/2023-2024:Scrapping, cleaning and painting the existing fire hydrant system in pump room, attending minor repair if necessary, including cleaning and painting the air vessel in pump room attending minor repairs test running etc as required

OD145918/2023-2024:Dismantling the exiting Foot valve 200/150/100/80mm or nearest size from suction pipe, cleaning the valve, attending minor repairs if necessary including foot valve washer nut bolts, including attending minor repair in suction pipe and painting the suction pipe etc, and refitting the same in position, test running etc as required.

OD145919/2023-2024:Dismantling the exiting NRV 150/100/80/65mm or nearest size from GI/MS pipe flange set, cleaning the valve, attending minor repairs if necessary including washer nut bolts etc, and refitting the same in position, test running etc as required.

OD145920/2023-2024:Dismantling the exiting Butterfly Valve 150/100/80/65mm or nearest size from GI/MS pipe flange set, cleaning the valve, attending minor repairs if necessary including washer nut bolts etc, and refitting the same in position, test running etc as required.

OD145915/2023-2024:Dismantling the exiting 3HP-15HP motor into stator and rotor, cleaning the winding, attending minor repairs, re taping the coils if necessary, heating and baking the windings reassembling, cleaning the impeller, pump side attending minor repairs including greasing the bearing, water sealing etc, including painting the pump set test running etc as required

OD145916/2023-2024:Dismantling the exiting 25HP-50HP motor into stator and rotor, cleaning the winding, attending minor repairs, re taping the coils if necessary, heating and baking the windings reassembling, cleaning the impeller, pump side attending minor repairs including greasing the bearing, water sealing etc, including painting the pump set test running etc as required

OD71544/2023-2024:Charges for General servicing, maintenance of Diesel Engine Including dismantling overhauling cleaning ,greasing checking alignments, changing of gland packing, diesel filter ,packing ,Engine oil, fuel pump reconditioning etc. complete and making the Unit in good working condition including Supply and installing Diesel Filter, Fuel Filter, Engine Oil and suitable capacity of Battery for starting pump set, attending minor repair work in engine control panel and checking trial running, cleaning diesel tank, checking tank and fuel pipe and filling 20ltr Diesel in tank etc. including painting the all component if required etc with suitable paint complete.

OD145921/2023-2024:Dismantling the exiting Cubicle Type fire pump Panel, cleaning and painting the panel attending minor repairs, including control wiring, with replacing damaged indication lamps, auto/manual operation switches, meters etc, including replacing/repairing the TPN ISO units and Pump starter contractor for the pump set auto manual operation, Diesel pump set controller, Battery charged for Diesel pump set and test running etc as required

90.17.10.2:Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as requiredSingle headed Stainless steel

90.17.16.2:Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :Stainless Steel (Grade 304)

90.17.18.2:Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :Stainless Steel (Grade 304)

OD145914/2023-2024:Supply & Fixing of Hose cabinet made of M.S Sheet with full front glass door and locking arrangements suitable to accommodate 2 Nos 15 M long Hose pipes and 1 No Branch pipe. The cabinet shall be painted to scarlet red colour out side & Offwhite inside.

90.3.20.3:Supply & installation of light fittings on TW round block <br> Supply, conveyance installation testing and commissioning the light fittings of following types made of CRCA with 0.5mm thickness complete with all accessories and lamps etc. directly on wall or ceiling with PVC round block neatly painted to suit the fitting and giving connection with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS and giving connections as required.1200 mm 1X20W LED Lamp with box type fixture

17.5.2:CABLING & WIRINGSupplying & laying of 2x1.5 sq mm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.

1.21.2:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm

90.6.6.1:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.1.50 sq mm

90.6.6.2:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.2.50 sq mm

OD145925/2023-2024:Charges for preparation of Fire Drawing per sheet first copy (including existing pump room and all floor of newly constructed Obstetrics and Gynecology Block for availing Fire NOC)

OD145924/2023-2024:Copying charges for additional copies per sheet

RAYAN FIRE PROTECTION SYSTEMS

Bidder Name

Aag India Private Limited

RAYAN FIRE PROTECTION SYSTEMS