Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹7.9 LAdmitted-Finance HOSUE NO 1170 STREET NO 22 SBS COLONY WEST KARAWAL NAGAR DELHI 110094 | NORTH EAST | DELHI | 110094 | -0.50% | ₹7.9 L | L1 | Admitted-Finance |
| 2 | Not Admitted-Fee/PreQual/Technical | - | - | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
₹8.0 L
EMD Value
₹15,939
Closing Date
16 Feb 2026, 3:00 pmClosed
Executive Engineer (E)
EEE PWD DHC and ND/Central G.F. MSO Bldg. ND
MOEI and Fans and RMO Drinking Water Supply Pump Sets, Sub-Station and Distribution System DG Sets and AC Equipments including Heating System installed at IGDTUW, Kashmere Gate, Delhi (SH- Replacement/Repairing of 250 KVA DG sets spare Parts and Illu
2026_PWD_286507_1
229/EEE/PWDDHC,NDC2025-26
Open Tender
Electrical Works
365 days
New Delhi
Please refer Tender documents.
16 documents required · 16 mandatory
₹0
₹15,939
20 Feb 2026
9 Feb 2026
16 Feb 2026
9 Feb 2026
16 Feb 2026
9 Feb 2026
Repairing and replacement of following unserviceable/damaged/ faulty parts of 250 KVA Cummins DG Set complete as required and credit of old dismantle materials to the contractor. i) CARD CONTROL GENSET = 1 No. ii) ALTERNATOR VOLTAGE RELAY 415 V AC = 1 No. iii) ON DELAY TIMER 12 V (6-60SEC) = 2 Nos.
Charges of cleaning and descaling of Radiator for 250KVA DG Sets with labour at site & testing commissioning etc as required.
Charges of repairing & calibration of PT PUMP/Fuel Pump for 250KVA DG Sets for 250KVA DG Sets with labour at site & testing commissioning etc as required.
Charges of calibration of controller of 250 KVA Cummins DG Set with labour at site & testing commissioning etc as required.
Supplying and Fixing of following capacity SMF batteries in the existing DG Set i/c dismantling and buyback of old batteries, connection, testing and commissioning complete as required. (a) 12 V 180 AH (Two Year Warranty)
SITC of 5 Mtr 50 mm dia Hollow , tubular type GI pole making with DB box, connection box, plate, nut bolt and making foundation for street light etc. Complete as required.
Supplying, installation, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMIEMC As per CISPR -15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin),SDCM (Standard Deviation Colour Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output .LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). (a) 50 watt
Supplying, laying and fixing of following sizes XLPE insulated PVC sheathed aluminum conductor armoured cable of 1.1 KV grade on Wall/surface etc complete as required. a) 3 X 16 Sq.mm
Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of Street Light, pump, DG set etc including form work etc as required.
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. (a) 63 mm dia (OD-63 mm & ID-51 mm nominal)
Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. (a) 3 x 2.5 sq. Mm
Providing, laying, testing & commissioning of 'B' class medium duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : (a) 32 mm
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.80 MB
BOQ_379314.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid