Civil Work-POWER TRANSFORMER PLANT AT KEL, MAMALA

Amount

CIVIL (FACTORY BUILDING)

50.6.1.8 Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in: CM 1:6 ( 1 cement : 6 coarse sand etc complete

13.1.1 12 mm cement plaster of mix: 1:4 ( 1 cement : 4 fine sand)

13.43.1 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface: Water thinnable cement primer

od160313/2020_2021 Cleaning the floor area and making the floor area free from dust and debris along with patching of the floor area wherever needed using patching compound followed by application of one coat of primer and 3 coats of epoxy paint.

od160314/2020_2021 Cleaning the floor area free from all kinds of debris and making the surface area clean and then applying a primer coat followed by 3 coat epoxy paint to a total of 2mm thickness

13.60.1 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work

od160375/2020_2021 External wall painting with waterproofing paint with approved brand and manufacture to give an even shade. One coat primer two or more quote paint

od160376/2020_2021 Cleaning the truss structure at all heights (up to 15m height) and then applying one coat of epoxy paint etc. complete including hire charges of scaffolding and other materials etc. complete.

od146836/2020_2021 Providing Vacuum Dewatered M20 concrete screeding with non metallic floor hardner 5 kg/sqm and recron 3S - one packet (125gram) for one bag of cement (50Kg), fixing MS channels to the required levels(10cm thick) vibrating the concrete with screed vibrator, dewatering using vacuum pumps finishning the top surface with power floater and power trowel including cost of material, labour etc. complete.

od146838/2020_2021 Groove cutting of the floor (5mm width, 20mm depth) and filling the same with polysulphide sealent or by poly urethane sealent

5.22.6 Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo - Mechanically Treated bars of grade Fe-500D or more

od153396/2020_2021 Providing and laying Corrugated Galvalume colour coated sheet made out of 0.50mm TCT cold rolled steel of 550 Yield strength conforming to ASTM A368 or As1397.Roofing shall be crest fixed to purlins with hot dip galvanised self drilling /self tapping screws of size (5.5x 55 mm) with integral EPDM washers. Minimum sheet over lap at end laps shall be 150mm.Penetration and end laps in sheet shall be sealed by proper sealent material. with EPDM seal, rate shall be inclusive of cost and conveyance of all materials all labour for lead, lift,scaffolding charges ,all labour charges making roof water tight with required sealand material etc complete at all levels

10.16.1 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes

4.11.2 Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal. Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408. (ii) Using Gravel mix soil

od161090/2020_2021 Providing and laying factory made chamfered edge Cement Concrete paver blocks of M-40 grade 100 mm thick with approved colour, design & pattern in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 100mm thick cement concrete paver block of M-40 grade with approved colour, design & pattern.

Road Formation

2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil

4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

7.1.1 Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with: Cement mortar 1:6 (1 cement : 6 coarse sand)

2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

4.11.2 Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal. Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408. (ii) Using Gravel mix soil

od161090/2020_2021 Providing and laying factory made chamfered edge Cement Concrete paver blocks of M-40 grade 100 mm thick with approved colour, design & pattern in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 100mm thick cement concrete paver block of M-40 grade with approved colour, design & pattern.

Note :1 All materials, Items, Equipment shall be best branded items with IS and approved by KEL

2:Rate should be inclusive of Insurance,Transportation, delivery and installation cost for all items

3.Rate should be Exclusive of GST.

4.Work should be executed as per DSR/PWD specification and direction of Engineer at site.

SAAJCONSTRUCTIONS