Construction of 4 rooms at GSSS Kasba Narwana, in Distt. Kangra (H.P.)

Amount

Excavation in foundation, trenches etc. in earth work in all classification of soil such as pick work, jumper work, pick jumper work, blasting work, jumper blasting work, soft and hard blasting and saturated soil, de-watering, including wedging out rocks where blasting work is prohibited, chiseling or any other mixed variety of soil, including shoring, shuttering and pumping out water upto any depth or any quontam of water including slush which may be arise during de-watering removal of slush and stacking the serviceable and un-serviceable material clear from the edge of excavation as direction of Engineer-In-Charge and retuning the stacked soil in 15cm (Fifteen centimeter) layers, when required into plinths, sides of foundation etc; consolidating each deposited layer by ramming, watering and then disposing of all excavated earth as directed by the Engineer-in-Charge, within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rates inclusive of octori, royality, Malkhana, toll taxes, GST and any other taxes imposed by the Government.

Excavation in drains and channels etc; in earth work in all kind of soil, such as pick work, jumper work, pick jumper work, blasting work, hard and soft blasting, saturated soil including chiseling or any other mixed variety of soil, including shoring, shuttering, de-watering and pumping out water upto any depth or any quontam of water including slush which may be arise during the de-watering removal of slush and stacking the serviceable and un-serviceable material clear from edge of excavation as per direction of Engineer-In-Charge and then returning the stacked soil in 15cm (fifteen centimeter) layer when required into plinths sides of foundations etc. consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as directed by the Engineer- In charge, within all leads, lifts of materials and other incidentals. As per approved drawing, design and as directed by the Engineer-in-Charge. The rates inclusive of octori, royality, Malkhana, toll taxes, GST and any other taxes imposed by the Government.

Sand filling under floor including watering, ramming, consolidating and dressing complete as per HP.PWD., Specification and approved drawing and as per entire satisfaction as directed by Engineer-In Charge, including carriage of material within all leads & Lift and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Foundation footings, bases of columns and mass concrete within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs, landings as per Architectural drawing and the like within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams cantilevers girders and lintels sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto all depths within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns pillar posts and struts Square, rectangular or polygonal in plan within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetres),so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in stairs cases with slopping or stepped soffits, excluding, landing, within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls under any thickness within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimeters), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters, buttresses plinth and string courses and the like within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.

Providing and laying cement concrete 1:4:8 (One cement isto Four sand isto Eight graded broken/crushed stone aggregate 40mm (Forty milimetres ) nominal size and down gauge) mechanically mixed and curing complete excluding cost of forms work in foundation and plinth within all leads, lifts of materials and other incidentals as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Stone filling in plinth with approved quality under floor including watering, ramming, consolidating and dressing complete within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying cement concrete 1:6:12 (One cement isto Six sand isto Twelve graded broken/crushed stone aggregate 40mm (Forty millimeters) nominal size and down gauge) mechanically mixed and curing complete excluding cost of forms work in foundation and plinth, within all leads, lifts of materials and other incidentals as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth including rakcking out joints with cement mortar 1:6 (One cement isto Six sand) and curing complete within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth including rakcking out joints with cement mortar 1:5 (One cement isto five sand) and curing complete within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the compressive strength of 20N/mm2 (twenty newton per square millimeter) with cement contents not less than 330 kg (Three hundred thirty kilogram) per cubic meter to give an smooth surfaces mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in foundation, footings, bases of columns and the like and mass concrete in all depth / thickness upto all floor level within all leads, lifts of materials and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the compressive strength of 20N/mm2 (twenty newton per square millimeter) cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic meter, mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landings, shelves their supports balconies, beams, girder, bressumers and cantilevers in all depth / thickness upto all floor level etc; within all leads, lifts of materials and other incidentals as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the compressive strength of 20N/mm2 (twenty newton per square millimeter) cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic meter, mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in columns, pillars posts and struts for all floors heights in all depth / thickness within all leads, lifts of materials and other. incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the compressive strength of 20N/mm2 (twenty newton per square millimeter) cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic meter, mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in Stair cases (except spiral stair cases) excluding landings, but including preparing of top surfaces and finishing of nosing upto all floor level within all leads, lifts of materials and other incidentals as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the compressive strength of 20N/mm2 (twenty newton per square millimeter) cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic meter, mechanically mixed and vibrated including curing complete in reinforcement work for reinforced concrete Chhajjas for all thickness in all floor levels up to all heights and all thickness including finishing the exposed surface with cement mortar 1:3 (One cement : Three sand) to give a smooth and even surface including centering/ form work and curing complete but excluding the cost of reinforcement for reinforced concrete work up to all floors level up to all height as per direction of Engineer-In-charge. within all leads, lifts of materials and other incidentals as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying reinforcement concrete work M-20 (M-twenty) design mix to obtain the compressive strength of 20N/mm2 (twenty newton per square millimeter) cement contents not less than 320 kg (Three hundred twenty kilogram) mechanically mixed and vibrated to give smooth and even surfaces including centring and shuttering etc. but excluding the cost of reinforcement as in mouldings as in cornices, windows sills etc not exceeding 15cm (Fifteen centimetres) in girth as per approved specification, drawing and design complete upto floor all level within all leads, lifts of materials and other. incidentals and as per approved drawing, design and as directed by the Engineer-in-Charge.

Providing and laying reinforcement concrete work M-20 (M-twenty) design mix to obtain the compressive strength of 20N/mm2 (twenty newton per square millimeter) cement contents not less than 320 kg (Three hundred twenty kilogram) mechanically mixed and vibrated to give smooth and even surfaces including centring and shuttering etc. but excluding the cost of form work and reinforcement for concrete work in walls (any thickness but not less than 0.10 (zero decimal ten) metre thickness) including attached pillasters buttersses, plinth and string courses etc. from top of foundation as per approved specification, drawing and design complete upto floor all level within all leads, lifts of materials and other. incidentals and as per approved drawing, design and as directed by the Engineer-in-Charge.

Providing Tor steel reinforcement of Sail / Tisco for reinforced cement concrete work including bending, binding, straighting, cutting and placing in position complete including cost of binding wires complete for all floors within all leads, lifts of materials and other incidentals as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying Damp Proof Course 100mm (One Hundred milimetres) thick with cement concrete 1:2:4 (one cement: two sand : four graded crushed stone aggregate 12.5mm (Twelve decimal five milimetres nominal size) and curing complete, within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Applying a coat of hot bitumen mexphalt 80/100 (Eighty/Hundred) or equivalent using 1.70 Kgs. (one decimal seventy Kilogram’s) per square metre. On Damp Proof Course after cleaning the surface with a piece of cloth lightly soaked in kerosene oil; within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Second class brick work using common burnt clay building bricks in super-structure upto all floor level in cement mortar 1:6 (One cement isto Six sand) within all leads, lifts of materials and other incidentals, as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Second class half brick work using common burnt clay building bricks in super-structure upto all floor level in cement mortar 1:4 (One cement isto four sand). within all leads, lifts of materials and other incidentals, as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing Single rebate angle iron door,window, clerestory window frame manufactured from structural steel iron section of 40X40X6 mm, (forty into forty into six millimetre) thickness welded with 50x6mm thick flat iron including hinges, jambs, lock jambs mild steel 50x25mm (fifty into twenty five millimetre) welded or rigidly fixed by mechanical means lugs with split end tails to each jambs including steel butt hinges 2.5mm (two decimal five millimetre) thick with provision with locking arrangeemnt and shock observer as specified and applying a coat of approved steel priming after pretreatment of the surface as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing double rebate angle iron door,window,clerestory window frame manufactured from structural steel iron section of 40X40X6 mm, (forty into forty into six millimetre) thickness welded with 50x6mm thick flat iron including hinges, jambs, lock jambs mild steel 50x25mm (fifty into twenty five millimetre) welded or rigidly fixed by mechanical means lugs with split end tails to each jambs including steel butt hinges 3.5mm (three decimal five millimetre) thick with provision with locking arrangeemnt and shock observer as specified and applying a coat of approved steel priming after pretreatment of the surface as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing angle iron frames manufactured from M.S.Angle iron section 25X25X5mm (Twenty five into Twenty five into Five milimetres) thickness including hinges jamb,lock jamb,beed and if required angle thrashold of mild steel angle 25X25mm (Twenty five into Twenty five milimetres) welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel butt hinges 2.5mm (Two decimal Five milimetres) thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after preteatment of the surface as directed by Engineer-in-Charge, within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

channels section 75x40x6mm (seventy five into forty into six millimetre) M.S. flat 75x4mm (seventy five into four millimetre) combination as per design drawing i/c hinges, jambs, beeds if required threshold of M.S. angles 50x25mm (fifty into twenty five millimetre) welded or rigidly fixed by mechanical means lugs, with split ends tails to each jambs including steel butts hinges 2.5mm (two decimal five millimetre) thick with a provision of locking arrangements shock observes and specified and applying coat of approved steel primer after pre-treatment of surfaces as directed by the Engineer–in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing steel glazed doors, windows and ventilators of standerd rolled steel sections, joints mitred and welded with 16x3.15 mm (sixteen into three point one five) lugs 10 cm (ten centimetre) long embedded in cement concrete blocks 15 cmx10cmx10cm (fifteen centimetre into ten centimetre into ten centimetre) size of 1:3:6 (one cement isto three sand isto six graded stone aggregate 20mm (twenty millimetre) nominal size) or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings,including providing and fixing of glass panes with glazing clips and special metal sesh puty of approved make complete including applying a priming coat of red lead paint within all leads, lifts of materials and other incidentals as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Fixed steel windows

Top hung ventilators.

Providing and fixing double ISI marked No. IS-1003 steel shutter windows side hung 1 (One) glazed and other wire gauge) of standard rolled steel section jointing mitered and welded manufactured to relevant ISI standard specification with 16x3.15mm (Sixteen into Three decimal Fifteen milimetres) lugs 20cm (Twenty centimetres) long embedded in cement concrete block 15x10x10cm (Fifteen into Ten into Ten centimetres) size of 1:3:6 (One cement : Three sand : Six graded stone aggregate 20mm (Twenty milimetres nominal size) or with wooden/steel plugs and screws or rawl plugs screws or with fixed clips or with bolts and nuts as required iron fitting including providing and fixing of glass pans with special putty of glazed side of shutter and wire gauge of IS designation 85G (Eighty five-G) with metal beading on other side complete including priming coat of red lead paint within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 35 mm (thirty five millimetre) thick including black enamelled M.S. butt hinges flush door shutters interior grade, commercial type, core of black-board construction with frame of first class hard wood and well matched commercial ply veneering with vertical grains of cross bands and face veneers on both faces of shutters within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 19mm (Nineteen milimetres) thick preliminated board (One side) BWP grade partical board in SDB shutters. The inner side of the shutter shall be finished with aluminium sheet within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 19mm (Nineteen milimetres) thick water proof terminate resistant commercial board with hard wood edging in shelves/box for cup-board including its shelves and back side of cup-board butt joints and fixing with nails and screws etc; complete within all leads, lifts of materials and other incidentals, as per drawing & design and as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 6mm (Six milimetres) thick ply wood lining with butt jointing and nails (frame work and cover fillets to be measured and paid for separately) within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 12mm (Twelve milimetres) thick preliminated board 100mm (One hundred milimetres) wide pelmet including 25mm (Twenty five milimetres) dia aluminium curtain rod and barackets within all leads, lifts of materials and other incidentals, as per drawing & design and as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and Fixing 12mm (twelve millimetre) thick prelaminated Phenol Bonded suede finish black boardd size 1.80 x 1.00 (one decimal eighty into one decimal zero metre) board bounded exterior / interior grade both side within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing magnetic catcher for cup board shutters with necessary screws etcetra; within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 65x35mm (Sixty five into Thirty five millimetres) special quality bright finished brass cup-board locks or ward robe locks with six levers including necessary screws etcetra complete (Indian make of approved quality) within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimetres) bright finished brass door stoper with rubber cushion screws etc to suit shutter thickness complete within all leads, lifts of materials and other. incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing Plain M.S. grills of required patterns in steel/wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws or with welding within all leads, lifts of materials and as per approved drawing, design and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 35mm (Thirty five millimetres) thick 2nd (second) class deodar wood wire guage shutters using galvanized Mild steel wire guage of IS guag desiganation 85 G with wire of dia 0.56 (Zero decimal fifty six millimetress) for doors , windows and clearstory windows including bright finished black enameled iron but hinges with necessary srews etc. complete within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 300x16mm (Three hundred into Sixteen milimetres) size oxidized M.S. sliding door bolts with nuts and screws etc. complete within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing M.S. tower bolts (barrel type) with necessary screws etc. complete as approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

200x10mm (Two hundred into Ten milimetres) size

150x10mm (One hundred fifty into Ten milimetres) size

Providing and fixing M.S. handles with necessary screws complete within all leads, lifts of materials and other. incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

125mm (One hundred twenty five milimetres) size

100mm (One hundred milimetres) size

75mm (seventy five milimetres) size

Providing and fixing 250mm (two hundred fifty millimetre) size oxidized M.S. hooks and eyes within all leads, lifts of materials and other. incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing land Laying 300 x 300 x 25mm (three hundred into three hundred into twenty five millimetre) automatic hydraulic compressed and polished Precast terrazzo tiles of ISI marked No.1237 in 50% (fifty percent) white cement and 50% (fifty percent) grey cement in white, green, yellow and maroon chips.the size of the chips shall be 0,,B (SG 403-B) of NTC as per approved shade laid in floors, treads of steps, ramp and landings on a bed of 25mm (twenty five millimetre) thickness of cement mortar 1:6 (one cement isto six Sand) jointed with cement slurry mixed and pigment to match the shade of tiles (Wherever required) including rubbing and polishing and nosing making Complete within all leads and lifts and other incidentals as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing land fixing Precast terrazzo tiles hydraulic compressed 20 mm (twenty millimetre) thick (with marble chips of specified sizes) in skirting and risers of steps of ISI marked No.1237 in 50% (fifty percent) white cement and 50% (fifty percent) grey cement of white, dark green, yellow and maroon chips.the size of the chips shall be 0,,B, of NTC (SG 403-B) 10 mm (ten millimetre) thick cement plaster 1:3 (one cement isto three sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required)including rubbing and polishing complete with shade of tile, including rubbing and polishing Complete within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying antiskid (Non slippery) mat finished spartic ceremic tiles 5.5mm (Five decimal Five milimetres) thick of Nitco or its equivalent in flooring (300x300mm (Three hundred into Three hundred milimetres) size treads of steps laid on a bed of 12mm (Twelve milimetres) thick cement mortar 1:3 (One cement: Three sand) finished with flush pointing in white cement. within all leads and lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.

Providing and laying 6 mm (Six milimetres) thick white glazed tiles of size 30 x 20 cm (thirty centimetre into twenty centimetre) in dado or skirting laid on a bed of 12mm (Twelve milimetres) thick cement mortar 1:3 (One cement isto Three sand) finished with flush pointing in white cement complete. within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.

50mm (fifty milimetres) thick cement concrete flooring 1:2:4 (One cement isto Two sand isto Four graded crushed stone aggregate 20mm (Twenty milimetres) nominal size and down gauge) laid in one layer finished with a floating coat of neat cement within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

15 mm (Fifteen milimetres) thick cement plaster skirting (upto any hgiehts) with cement mortar 1:3 (One cement isto Three sand) finished with a floating coat of neat cement including rounding of junction with floor within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing land fixing 25mm (twenty five millimetre) thick cement concrete chequered tile 30 x 30 cm (thirty into thirty centimetre) laid over 10 mm (ten millimetre) thick cement plaster 1:3 (one cement isto three sand ) jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required). within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying 20mm (Twenty milimetres) thick polished White makrana marble work with round nosing (Table rubbed and polished) in flooring 20mm (Twenty milimerres). thick base in cement mortar 1:3 (One cement:Three sand) including jointing with cement mortar 1:2 (One white cement: Two marble dust) with an admixure of pigment to match the shade of the marble. within all leads, lifts of materials and other Incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge

Providing and fixing 110mm (One hundred ten milimtres) diametre PVC pipe on wall face including acessories for rain water pipes of working pressure not less than 4.5 kg (four decimal five kilogramme) per square centimetre as per ISI finolex / relience / vectus or its equivalent for rain water pipe fixed with approved adhesive including filling the joints complete within all leads, lifts of materials and other incidentals. and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and Fixing hollow rectangular M.S. pipe of 75x25mm (seventy five into twenty five millimetre) hand rail of 14 (fourteen) to 16 (sixteen) gauge with M.S. flats at 75 (seventy five) and 90 cm (ninety centimetre) height welded with M.S. solid square bar 20 x 20 (twenty into twenty) and 12 x 12mm (twelve into twelve millimetre) in combination with M.S. flat balusters embeded in cement concrete 60cm c/c jointing with gas / electrical welding at top etc. complete within all leads, lifts of materials and other incidentals. and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 50mm (twenty millimetre) dia M.S. hollow pipe hand rail slip resistant with round ends at two level at 75cm (seventy five centimetre) and 90cm (ninety centimetre) height, welded to 25mm (twenty five centimetre) M.S. hollow pipe which in furnished be welded to ballustor it should extended 30 cm (thirty centimetre) beyond the top and bottom of the ramp and 50mm (fifty millimetre) dia M.S. hollow pipe ballustor embeded in cement concrete 600mm (six hundred millimetre) centre to centre with 25mm (twenty five centimetre) M.S. hollow pipe moulded shape complete with applying a coat of red lead pant as per direction of Engineer-Incharge within all leads, lifts of materials and other incidentals. and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing Railing of M.S. hollow section 80x40x3.2mm (eighty into forty into three decimal two millimetre) welded in straight length over M.S. flat at top of vertical balusters 25mm (twenty five millimetre) dia of solid square bars upto 85cm (eighty five centimetre) height including one coat of red oxide priming coat on M.S. hollow section, flat & Balusters etc. complete as per direction of Engineer-Incharge within all leads, lifts of materials and other incidentals. and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Painting two or more coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter enamel paint other than white within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matter) sand papering and knotting with ready mixed paint brushing wood primer pink within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Painting two or more coats (excluding priming coat) on new wood and wood based surface with enamel paint other than white to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering and stoping within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

6mm (Six milimetres) thick cement plaster in ceiling with cement mortar 1:3 (One cement: Three sand) for all heights within all leads, lifts of materials and other incidentals as per approved specification, drawings and design. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

15mm (Fifteen milimetres) thick cement plaster in single coat on fair side of brick/concrete/ stone walls for interior plastering upto all floor levels including arises internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement isto six sand) within all leads, lifts of materials and other incidentals as per drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

15mm (Fifteen milimetres) thick cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto all floor levels including arises internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement isto six sand) within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

15mm (Fifteen milimetres) thick cement plaster in single coat on fair side of brick/concrete/ stone walls for interior plastering upto two floor levels including arises internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:5 (One cement isto five sand) within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

15mm (Fifteen milimetres) thick cement plaster in single coat on rough side of brick/concrete/ stone walls for interior plastering upto two floor levels including arises internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:3 (One cement isto three sand) within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Distempering (two coats) with dry distemper with Nerolac/ Asian paints of approved brand and manufacture and of required shade on ceiling/sloping roof surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth.Priming coat with distemper primer within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Distempering (two coats) with acrylic oil bound washable distemper with Nerolac/ Asian paints of approved brand and manufacture and of required shade on ceiling/sloping roof surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth.Priming coat with distemper primer within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Applying Birla / J.K white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Applying priming coat on new concrete / masonry / asbestos cement / plastered surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required with Acrylic primer (spectrum or equivalent of superior quality) within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Wall painting (two coats) with Premium emulsion paint of Asian / Dulux /Nerolac paints approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including t horoughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Finishing wall with Apex weather proof exterior grade emulsion of Asians Paints / Exterior Emulsion of Nerolac Suraksha paint as per approved shade approved design (Apexultima) on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing under layer for plinth protection of 75mm (Seventy five milimetres) thick(un-consolidated)bed of dry brick/stone aggregate 40mm (Forty milimertres) nominal sizes well rammed and consolidated and grouted with fine sand including preparation of ground within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge.

Providing plinth protection 50mm (Fifty milimetres) thick cement concrete 1:3:6 (One cement: Three sand: Six graded crushed stone aggregate 20mm (Twenty milimetres) nominal size) including finishing the top surfaces of concrete smooth within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge.

Construction of drain with cement concrete 1:3:6 (One cement isto Three sand isto six graded crushed stone aggregate 20mm (Twenty milimetres) nominal size) including earth work shuttering and cast in-situ RCC cover slab over drain and cement concrete flooring 1:2:4 (One cement : Two sand : Four graded crushed stone aggregate 20mm (Twenty milimetrres)and finished with a floating cost of neat cement complete as per standard design within all leads, lifts of materials and other. incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.

Providing and fixing polythelene aluminum polythelene (PE- AL-PE) composite pressure pipe U.V. stabilized with carbon block confirming to I.S. 1545-2004 of Kitec or its equivalent for water supply including clamps at appropriate spacing, cutting fixing and making good the walls etcetera; but excluding the cost of fittings (Internal work), including filling the joints with approved adhesive complete including entire carriage of materials within all leads lifts and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

1216 (16mm) sixteen millimeter diameter pipe O.D. pipe

1620 (20mm) twenty millimeter diameter pipe O.D. pipe

Making connection of galvanized mild steel distribution branch with galvanized mild steel main 20mm to 40nmm (Twenty milimetres to Forty milimetres)nominal bore by providing and fixing tees including cutting and threading the pipe complete including entire carriage of materials within all leads lifts and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes light grade ISI marked including fixing with approved adhesive etc. complete including entire carriage of materials within all leads lifts and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

150mm (One hundred fifty milimetres) diametres

110mm (One hundred ten milimetres) diametres

Providing and fixing M.S. holder bat clamps of approved design to P.V.C.. rain water pipe embedded in and including cement concrete blocks 10x10x20cm of 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm (Twenty milimetres) nominal size and cost of cutting holes and making good the walls etc; within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

150mm (One hundred fifty milimetres) diameter.

110mm (One hundred ten milimetres) diametres

Providing and fixing P.V.C. I.S.I. marked heal rest including filling the joints with including fixing with approved adhesive within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

150mm nominal (One hundred fifty milimetres) diameter. (confirming to BIS-14735-99)

110mm (One hundred ten milimetres) diameters (confirming to BIS-14735-99)

Providing and fixing P.V.C. Collar ISI marked including fixing with approved adhesive complete, within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

150mm (One hundred fifty milimetres) diameter. (confirming to BIS-14735-99)

110mm (One hundred ten milimetres) diametres (confirming to BIS-14735-99)

Providing and fixing PVC double equal branch with oval access door, insertion rubber washer 3 mm (three millimetre) thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

150mm (One hundred fifty milimetres) diameter. (confirming to BIS-14735-99)

110mm (One hundred ten milimetres) diametres (confirming to BIS-14735-99)

Providing and fixing 75mm (seventy five millimetre) P.V.C. Cowl ISI marked including fixing with approved adhesive complete, within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 110 x 90mm (One hundred ten into Ninety milimetres) P.V.C. I.S.I. marked floor trap ISI marked (confirming to BIS-14735-99) of self cleaning design including with approved adhesive cost of cutting and making good walls and floors complete, within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing vitreous China Ordinary closet wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1 (one cement isto one sand) (Seat and over to be measured and paid for separately), within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 110mm (one hundred ten) millimetre diametre PVC ‘P’ or 'S' trap for water closet (squatting pan) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete within all leads, lifts of materials and other incidentals

Providing and fixing PVC coloured/white with (dual flushing system) 10.00 Ltrs (Ten litres) capacity low level flushing cistern (Sleek Plus) Hindware/cera/Jaquar of star white / snow white shade with fittings such as lead valve less siphon, 15mm (Fifteen milimetres) nominal size PVC ball valve with polythene float, with flush buffor, unions and couplings for connection with inlet, outlet and over flow pipe, 40mm (Forty milimetres) diametres C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (over flow pipe to be measured and paid for separately) within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and Fixing G.I. Inlet connection flush pipe with W.C. pipe complete in all respect within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing plastic seat solid type and cover of Hindware/cera/Jaquar of star white / snow white shade for wash down water closet with C.P. brass hinges and rubber buffers (white plastic seat and cover) within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing C.P. jet spray of Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindon series of Jal of approved quality and colour with one metre tube within all leads, lifts of materials and other incidentals and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing stainless steel kitchen sink size 610 x460 mm (six hundred ten into four hundred sixty millimetre) with bowl depth 200 mm (two hundred millimetre) of AMC unik / diamond approved standard ISI make with drain board and C.P. waste with C.I. or M.S. Brackets painted including cutting holes and making good the same but excluding fitting within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing flat back 600x450mm (Six hundred into Four hundred fifty milimetres) beveled edge mirror of modiguard / autal / Galdin fish or superior glass mounted on 6mm (Six milimetres) thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P. brass screws and washers within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing vitreous china wash basin Delta No.10010 of Cera / Hindware 55x40 CM (fifty five into forty centimetre) with single hole for pillar tap with pedestal including C.I. or M.S. brackets, painted white including cutting holes and making good the same but excluding fittingswithin all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 600x20mm (Six hundred into Twenty milimetres) C.P. brass Towel rail of Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindon series of Jal.brackets fixed to wooden plugs within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing chromium plated.(Heavy duty makes ISI marked is No. 8931 & 8934) brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws, within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetres) diametre C.P. stop cocks of Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindon series of Jal within all leads, lifts of materials and other incidentals and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetres) diametre nominal bore chromium plated ISI marked fancy bib tap of Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindon series of jal within all leads, lifts of materials and other incidentals and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen milimetres) diametres C.P. brass pillar tap with capstan Head of Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindon series of Jal within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen milimetres) nominal bore PVC connection pipe with brass union 45cm (Forty five Centimetres) length within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen milimetres) nominal bore C.P. brass full way valve with wheel, of Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindon series of Jal within all leads, lifts of materials and other incidentals and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimetres) diametres M.I. union for wash basin or sink.complete within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and placing water tank make P.V.C. SINTEX or equivalent having capacity of 1000 (One thousand) liters each tank with necessary fittings including over flow pipe scour pipe etcetera and pads required for in let and out let ball valve with cover and locking arrangements complete in all respect within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 600x120mm (six hundred into one hundred twenty millimetre) glass shelf of Modi guard / flout / sant gobind / Aashai Hindon series of jal with C.P. brass. (Heavy duty makes ISI marked) brackets and guard rail complete fixed to wooden plugs with C.P. brass screws within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 20mm (twenty millimetre) nominal bore to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Construction manhole with R.C.C. top slab in 1:2:4 (One cement isto Two sand isto Four graded crushed stone aggregate 20mm(Twenty milimetres nominal size) foundation concrete 1:4:8 (One cement isto Four sand isto Eight graded crushed/broken stone aggregate 40mm(Forty milimetres nominal size) inside plastering 15mm (Fifteen milimetres) thick with cement mortar 1:3 (One Cement isto three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (One cement isto Two sand isto Four graded crushed stone aggregate 20mm(Twenty milimetres nominal size) finished smooth complete including curing and testing inside size 800x800mm (Eight hundred into Eight hundred milimetres) 500mm(Five hundred milimetres) deep, including precast cement concrete cover medium duty with 300mm (Three hundred milimetres) thick walls of squared rubble masonry coursed with hard stone of approved quality in cement mortar 1:3 (one cement: three sand) within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Constructing brick masonry chamber for under ground C.I. inspection chamber and bends with common burnt clay building bricks in cement mortar 1:5 (One cement : Five sand) precast cement concrete cover medium duty with RCC top slab with 1:2:4 (One cement: Two sand: Four graded crushed stone aggregate 20mm (Twenty milimetres nominal size) foundation concrete 1:5:10 (One cement: Five sand: Ten graded crushed/broken stone aggregate 40mm(Forty milimetres nominal size) inside plastering 15mm ( Fifteen milimetres) thick with cement mortar 1:3 ( One Cement: three sand) finished with a floating coat of neat cement on walls and bed concrete etc. complete inside dimensions 455x610mmx450mm (Four hundred fifty five into Six hundred ten into Four hundred fifty milimetres) deep within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 20mm ( twenty milimetre) nominal bore ferrule including boring and taping the main complete in all respect within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 15mm ( fifteen milimetre) size G.I./M.I Union of following sizes (where not included in the items ) complete in all respect within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 20mm ( Twenty milimetre) size G.I./M.I Union of following sizes (where not included in the items ) complete in all respect within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 110mm (One hundred ten milimetres) nominal bore/diameters P.V.C. plain bend complete, within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying 150mm (one hundred fifty millimetre) dia cement concrete 1:5:10 (one Cement isto five Sand isto ten graded stone aggregate 40mm (forty millimetre) nominal size) in hunching of S.W. pipes of the following internal diameters, including concrete for beddings, necessary form work and curing complete within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing polythelene aluminum polythelene (PE- AL-PE) composit end seal compression fitting as per IS-1545-2004 for cold water supply e.g. tees, elbows, reduser,connceters,couplers and claps jointing testing and fitting complete including entire carriage of materials within all leads lifts and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing & fixing Kitec/ Kisan Equal Tee (1620)

Providing & fixing Kitec/Kisan Female Elbow 1620 X15 mm)

Providing & fixing Kitec/Kisan Female branchTee.(1620X1620X20mm)

Providing & fixing Kitec /Kisan Female Elbow (1620 X15 mm)

Providing & fixing Kitec / KisanMale Thread Connector (1620X15mm)

Providing and Fixing 455x 610mm (four hundred fifty five into six hundred ten millimetre) light duty rectangular C.I. Manhole with frane cover weight 38 kg (thirty eight kilogramme) (single seal) within all leads lifts and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and Fixing 100mm (one hundred millimetre) dia C.I. Cowl within all leads lifts and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Vinod Kumar

aatish choudhary govt. cont.

Anubhav Sharma

PARDEEP KUMAR

krishan kumar