Renovation of Rooms with modular workstation of Directorate of education department, Old Sectt., Delhi-110054

Amount

ALL BOARD ITEMS ARE IN EXTERIOR GRADE WORKSTATION CONSISTING OF THE FOLLOWING PARTITION Tiles Based Partition System of 63mm thickness 1230mm height having inner framework of CRCA steel of Grade D as per IS:513 coverd with tiles on both sides and covered with aluminium powder coated trims in top end sides.Partition has steel receway at bottom level. Partition system provides option of various kinds of tiles like prelaminated board tiles, fabric tiles & white marker tiles. All metallic parts undergo a 7 stage antiust treatment and are powder coated in matt finish to a thickness of 40-60 microns. The modular partitions are independent and not grouted in the floors. The modular partitions are an assembly of the following parts:- FRAME:- Frame forms the basic support structure for all other components. The main vertical member of the frame bearing all the load is made of 1.2mm CRCA steel and the horizontal members are made of 1.2mm CRCA steel. The frames also has prefabricated slots for fixing brackets to support workstops, gable ends etc. Bottom level of frame is provided with Skirting receway of 132mm Ht made up of CRCA steel 0.7mm. The skirting is designed so that switch cutout can be provided at the skirting level and are snap fitted on both sides woth plates made of 1mm thick Galvanized steel. TILES:- BOTTOM TILES can be following options:- The Prelaminated Particle Board tile are provided in12mm Prelaminated Particle Board of Grade II type II as per IS:12838 with decorative laminate on top and white balancing in unexposed face, having all exposed edges sealed eith PVC edge banding tape, pressed at 1080 C with holt melt glue on multistage edge banding machine. The tiles are supported with tile Hook made of MS steel sheet duly galvanized to clip on to the partition frame. UPPER TILES can be in following options:- The Fabric Tiles are made of 11mm high density soft board inside covered with 3mm foam and fabric pasted in them. The tiles are supported with tiles Hook made of MS steel sheet duly galvanized to clip on to the partition frame. The Marker Tiles are made up of 9mm particle board pasted with 0.8mm white marker laminate, on the exposed face and white balancing on unexposed face, having all exposed edges sealed with PVC edge banding tape, pressed at 1800 C with holt melt glue on multistage edge banding machine. The tiles are supported with tile Hook made of MS steel sheet duly galvanized to clip on to the partition frame.TRIMS:- The exposed vertical and horizontal faces of the frames are snap fitted with curve trims. The trims are made of aluminum extrusion of 1.3mm thickness and 63mm width and are covered with ABS caps. CORNER POST:- At 2-way 900 joint the frame are connected by post of aluminum extrusions of 1.2mm thickness using special designed fasteners.JUNCTION CONNECTOR:- The frames are connected by interlocking extrusions connectors at the (3-way 900, 4-way 900) joint using special designed fasteners. GROOVE COVERS:- The vertical gaps between the tiles can be properly and uniformly maintained and can be vertically covered by fixing specially extruded aluminum section to maintain uniform groove on both the sides of the partition.WIRE MANAGEMENT :- Partition system has concealed wire management capabilities and are engineered for responsive and safe operations of power, telecommunication and data (LAN) and has separate components for electrical, data and telephone cables having adequate capability of both the vertical and horizontal wire movements, Slots/cutouts are provided on Raceways to fix all electrical and data points. Separate Middle raceway can be provided as per requirement below or above the worktop level. LEVELLERS:- Levellor of M10 size having base of ABS are provided in each frame which allow 10-25mm adjustment for floor unevenness.

WORKTOP Manufacturing, assembling, transporting and placing/fixing in position knock down modular furniture such as office table, drawer unit, side rack/credenza, wall hung file storage cabinet, ward robe storage/almirah etc. Configurated of modular panels of particle board as per drawing specification and direction of Engineer-in-charge. All outer exposed edges of all panels shall be covered & sealed with 2mm thick PVC edge banding tape, Rehau or Dollkin or equivalent make and all concealed and butt edges of all panels shall be covered and sealed with 0.7 mm thick PVC edge banding tape of same make with hot melt glue on edge banding machine at 200 degree C temperature. All joinery fabrication work shall be done with mini fix fittings and plastic dowels in approved factory including cost of mini fix fittings, PVC cable wire manager, Nylon glides 20mm, plastic dowels etc. (Cost of providing and fixing of fittings to modular furniture such as drawer slides self closing springs loaded hinges, multipurpose lack, knob/handles etc. shall be paid for separately.) (i) 25 mm thick interior grade particle board confirming to IS 3087 for table top, with one side post formed grade lamination 0.70mm thick of FORMICA or MERIND or equivalent make including rounding of post formed lamination on two long edged of top of table and turning bact to 75 mm depth and post forming balancing lamination on other sides. The other two/three edge shall be covered with 2 mm thick PVC edge banding tape as per make and specifications mentioned above.

Manufacturing, assembling, transporting and placing/fixing in position knock down modular furniture such as office table, drawer unit, side rack/credenza, wall hung file storage cabinet, ward robe storage/almirah etc. Configurated of modular panels of particle board as per drawing specification and direction of Engineer-in-charge. All outer exposed edges of all panels shall be covered & sealed with 2mm thick PVC edge banding tape, Rehau or Dollkin or equivalent make and all concealed and butt edges of all panels shall be covered and sealed with 0.7 mm thick PVC edge banding tape of same make with hot melt glue on edge banding machine at 200 degree C temperature. All joinery fabrication work shall be done with mini fix fittings and plastic dowels in approved factory including cost of mini fix fittings, PVC cable wire manager, Nylon glides 20mm, plastic dowels etc. (Cost of providing and fixing of fittings to modular furniture such as drawer slides self closing springs loaded hinges, multipurpose lack, knob/handles etc. shall be paid for separately.) (i) 18 mm thick flat pressed, three layered pre-laminated particle board with both side decorative lamination (Medium density), Grade II, type II conforming to IS:12823 (Interior grade).

Providing and fixing keyboard tray made up of 1.2mm thick CRCA steel sheet duly powder coated. The Keyboard tray runs on ball slides for smooth movement.

Providing & Fixing CPU trolley of size 200 x250x 250 mm thick CRCA steel sheet duly powder coated complete as per direction of Engineer-in-charge.

Providing and placing of Visitor chair with steel tube frame seat 12mm thick hot pressed ply. The back is designed with contoured lumber for extra comfort. The pedestal is made of high class steel duly chrome plated.The seat and back finished in high class upholstery of approved sample all complete as per direction of Engineer in charge.

Providing and placing of low back chair in approved colour of LEATHRITE/FABRIC with seat and back 12mm thick hot pressed ply. The back is designed with contoured lumber for extra comfort. The pedestal is made of die cast aluminium with buffing finished & is fitted with 5 nos. twin wheel castors all finished in high class upholstery all complete as per direction of Engineer in charge.

Providing and fixing auto closing hinges of HETTICH/EBCO or equivalent make of approved brand to cupboard shutters with steel screws including making necessary recess in panel board and finished etc. complete as per direction of Engineer-in-charge.

Providing and Fixing of SS handle 96 mm in various item drawer unit, storages etc. complete as per direction of Engineer-in-charge.

Providing and Fixing Multipurpose lock of GODREJ/PLAZA or equivalent make of approved brand and manufacture to drawer of cupboard with steel screws including making recess or required size in board and fixing of standard plate having groove meant for receiving locks lever in locked position etc. complete as per direction of Engineer-in-charge.

Providing and fixing powder coated telescopic slide channels with side bracket supports of HERSHELL/EICHER or equivalent make of approved brand for computer table key board.(a) 405 mm long

Providing and placing in position decorative, sofa sets fully upholstered frame work made of hollock wood in different section and the visible part of wood made of 2nd class teak wood in approved design and shape, upholstered with superior quality sleep well foam of density 50kg/m3 of required thickness i.c. 25, 50 and 100 mm upholstered with superior quality tapestry cloth as per approved sample and shade and all other material required and finally polished the exposed portion of wood with melamine polish of desired shade and as per sample and as per direction of Engineer-in-charge.

Providing and placing in position central table of size 1.22x0.61x0.40 mtr. The frame work shall be made of 2nd class teak wood. Top shall be made out of cross section of 100x40mm 4 legs shall be made out of section 100x100mm in ornamental shape & pattern. The top of the table shall be made from 10 mm thick approved quality smoke glass. The table shall be finished with lacquer polished as per direction of Engineer-in-charge.

Providing and placing of High back chair in approved colour of LEATHRITE/FABRIC with seat and back 12mm thick hot pressed ply. The back is designed with contoured lumber for extra comfort. The pedestal is made of die cast aluminium with buffing finished & is fitted with 5 nos. twin wheel castors all finished in high class upholstery all complete as per direction of Engineer in charge.

Providing and placing in position side table/Peg table of size 0.61x0.61x0.46 mtr. The frame work shall be made of 2 nd class teak wood. Top shall be made out of cross section of 100x40mm 4 legs shall be made our of section 100x100mm in ornamental shape & pattern. The top of the table shall be made from 10 mm thick approved quality smoke glass. the table shall be finished with lacquer polished as per direction of Engineer-in-charge.

Manufacturing, Supplying and fixing in place modular steel of approved make Mobile Storage System - (as per manufacturer Specifications and etc complete and as per apprroved sample by the compitant authourity and as per the direction of Engineer-In-charge. The KNOCK DOWN STORAGE UNITS shall be powder coated with epoxy polyester powder with approximately overall height of 2080mm. The units shall be arranged in a row with four or five units placed-side by side as per requirement at site. Each unit will be of size 2080x915x457 mm. The body of the module shall be 0.8 mm thick CRCA steel The unit shall be divided into five loading compartments by placing four shelves of .8 mm thick CRCA steel. The unit or row of units shall rest on understructure of approximate height 65 mm made up of 3.15 mm thick hot rolled steel sheet which in turn shall rest on set of rails 35 mm high consisting 'J'section 2 mm thick hot rolled sheet and 25 mm square bar, both connected by screws. The rails shall be embedded to properly levelled ground with the help of rawl plug and screw. The configuration shall consist of one single static unit of depth 457 mm, twin mobile drive units of depth 910 mm as required and one last drive of depth' 457 mm. The cost will include all necessary fittings, locks, bolts, screws, painting, powder coating and rails complete and nothing extra shall be paid on this account. (a) Single Face Fixed 2080x915x457 mm

Manufacturing, Supplying and fixing in place modular steel of approved make Mobile Storage System - (as per manufacturer Specifications and etc complete and as per apprroved sample by the compitant authourity and as per the direction of Engineer-In-charge. The KNOCK DOWN STORAGE UNITS shall be powder coated with epoxy polyester powder with approximately overall height of 2080mm. The units shall be arranged in a row with four or five units placed-side by side as per requirement at site. Each unit will be of size 910x455x1980 mm. The body of the module shall be 0.8 mm thick CRCA steel The unit shall be divided into five loading compartments by placing four shelves of .8 mm thick CRCA steel. The unit or row of units shall rest on understructure of approximate height 65 mm made up of 3.15 mm thick hot rolled steel sheet which in turn shall rest on set of rails 35 mm high consisting 'J'section 2 mm thick hot rolled sheet and 25 mm square bar, both connected by screws. The rails shall be embedded to properly levelled ground with the help of rawl plug and screw. The configuration shall consist of one single static unit of depth 455 mm, twin mobile drive units of depth 910 mm as required and one last drive of depth' 455 mm. The cost will include all necessary fittings, locks, bolts, screws, painting, powder coating and rails complete and nothing extra shall be paid on this account. (b) Double Face mobile 2080x915x457 mm

Manufacturing, Supplying and fixing in place modular steel of approved make Mobile Storage System - (as per manufacturer Specifications and etc complete and as per apprroved sample by the compitant authourity and as per the direction of Engineer-In-charge. The KNOCK DOWN STORAGE UNITS shall be powder coated with epoxy polyester powder with approximately overall height of 2080mm. The units shall be arranged in a row with four or five units placed-side by side as per requirement at site. Each unit will be of size 910x455x1980 mm. The body of the module shall be 0.8 mm thick CRCA steel The unit shall be divided into five loading compartments by placing four shelves of .8 mm thick CRCA steel. The unit or row of units shall rest on understructure of approximate height 65 mm made up of 3.15 mm thick hot rolled steel sheet which in turn shall rest on set of rails 35 mm high consisting 'J'section 2 mm thick hot rolled sheet and 25 mm square bar, both connected by screws. The rails shall be embedded to properly levelled ground with the help of rawl plug and screw. The configuration shall consist of one single static unit of depth 455 mm, twin mobile drive units of depth 910 mm as required and one last drive of depth' 455 mm. The cost will include all necessary fittings, locks, bolts, screws, painting, powder coating and rails complete and nothing extra shall be paid on this account. (c) Single Face mobile 2080x915x457 mm

SHRI BHAGWAN MITTAL

VIJAY FURNISHERS

Ganpati Furniture Systems Pvt Ltd

INDO OFFICE SOLUTIONS PVT. LTD.