MID/J/65

1) Gate at RD :2700m of Main Canal (Drung canal): Fabrication and installation of a new Gate at RD:2700m of Main Canal (Drung canal) to regulate irrigation water by way of Fabrication of leaf structure of size 1.50mX1.00m (approx.) using the ISMC 75 channel size with vertical & horizontal cross members for support by way of cutting as per required size and then welding using superior quality electrodes. The leaf is to be fabricated with 3 number horizontal supports and 3 number vertical supports at equidistance from each other. The supports should be fabricated out of ISMC 75 channel. Providing and welding the MS sheet of 6 mm thickness on the frame of fabricated MS channel. Providing and fixing of rubber seals(reputed make) with MS Flat as per design requirement with nuts&bolts and also ensure the seal is continuous all around to prevent leakages. Job further includes providing and fitting of fasteners to the embedded frame of the gate. The Job also includes complete fabrication of outer frame MS structure of size (1.50m X2.0m) by MS channel of ISMC 125 consisting of groove channels, base channels and checking it for trouble free operation. Top hoisting channel consisting of 2 number of ISMC 125 of length approx. 2.5 meters each. Fabrication of L shaped clamps attaching stem rod attachment during up and downward moment of gate. Fabrication, providing & fitting of 03 Ton capacity manually operated, worm gear type winch machine along with stem rod and base plate of 10 mm thickness. Oiling and greasing the gear and bearings mechanism before fitting. Providing and fitting of rain pipe over the winch machine to secure the stem rod and machinery. Loading the gate structure along with winch machine on the mechanical transport for carrying to site of installation. Unloading the gate structure at road side then shifting to the site of installation. Installation of gate structure by way of lowering the leaf structure into the sliding grooves using skilled manual labour and hydra or other suitable mechanical means. Drilling requisite no. of holes in hoisting channels at site.Fitting of winch machine on the supporting channel and connecting the stem rod to the leaf structure after ensuring the proper alignment/gravity of the gate structure. Complete painting of gate structure with one coat of red oxide primer and two coats of superior quality enamel paint (Asian paints/ Kansai Nerolac paints/ Berger paints/ equivalent Reputed make ). The complete job includes cost of material, (skilled/unskilled) labour charges, loading & unloading, to &fro carriage, generator charges, testing and installation and hire charges of the hydra, tools & tackles used during the execution of job. Complete Job. 2) Gate at RD :2000m of Main Canal (Drung canal): Fabrication and installation of a new Gate at RD:2000m of Main Canal (Drung canal) to regulate irrigation water by way of Fabrication of leaf structure of size 1.20mX1.0m (approx.) using the ISMC 75 channel size with vertical & horizontal cross members for support by way of cutting as per required size and then welding using superior quality electrodes. The leaf is to be fabricated with 3 number horizontal supports and 3 number vertical supports at equidistance from each other. The supports should be fabricated out of ISMC 75 channel. Providing and welding the MS sheet of 6 mm thickness on the frame of fabricated MS channel. Providing and fixing of rubber seals(reputed make) with MS Flat as per design requirement with nuts&bolts and also ensure the seal is continuous all around to prevent leakages. The Job also includes complete fabrication of outer frame MS structure of size (1.20m X2m) by MS channel of ISMC 125 consisting of groove channels, base channels and checking it for trouble free operation. Top hoisting channel consisting of 2 number of ISMC 125 of length 2 meters each. Fabrication of L shaped clamps attaching stem rod attachment during up and downward moment of gate. Fabrication, providing & fitting of 03 Ton capacity manually operated, worm gear type winch machine along with stem rod and base plate of 10 mm thickness. Oiling and greasing the gear and bearings mechanism before fitting. Providing and fitting of rain pipe over the winch machine to secure the stem rod and machinery. Loading the gate structure along with winch machine on the mechanical transport for carrying to site of installation. Unloading the gate structure at road side then shifting to the site of installation. Installation of gate structure by way of lowering the leaf structure into the sliding grooves using skilled manual labour and hydra or other suitable mechanical means. Drilling requisite no. of holes in hoisting channels at site.Job further includes providing and fitting of fasteners to the embedded frame of the gate. Fitting of winch machine on the supporting channel and connecting the stem rod to the leaf structure after ensuring the proper alignment/gravity of the gate structure. Complete painting of gate structure with one coat of red oxide primer and two coats of superior quality enamel paint (Asian paints/ Kansai Nerolac paints/ Berger paints/ equivalent Reputed make ). The complete job includes cost of material, (skilled/unskilled) labour charges, loading & unloading, to &fro carriage, generator charges, testing and installation and hire charges of the hydra, tools & tackles used during the execution of job. Complete Job. 3) Gate at Pargonie Distributry RD :0m of Main Canal (Drung canal): Fabrication and installation of a new Gate at Pargonie Distributry RD:0m of Main Canal (Drung canal) to regulate irrigation water by way of Fabrication of leaf structure of size 0.70mX0.70m (approx.) using the ISMC 75 channel size with vertical & horizontal cross members for support by way of cutting as per required size and then welding using superior quality electrodes. The leaf is to be fabricated with 3 number horizontal supports and 3 number vertical supports at equidistance from each other. The supports should be fabricated out of ISMC 75 channel. Providing and welding the MS sheet of 6 mm thickness on the frame of fabricated MS channel. Providing and fixing of rubber seals(reputed make) with MS Flat as per design requirement with nuts&bolts and also ensure the seal is continuous all around to prevent leakages. The Job also includes complete fabrication of outer frame MS structure of size (0.70m X1.40m) by MS channel of ISMC 125 consisting of groove channels, base channels and checking it for trouble free operation. Top hoisting channel consisting of 2 number of ISMC 125 of length 1.20 meters each. Fabrication of L shaped clamps attaching stem rod attachment during up and downward moment of gate. Fabrication, providing & fitting of 03 Ton capacity manually operated, worm gear type winch machine along with stem rod and base plate of 10 mm thickness. Oiling and greasing the gear and bearings mechanism before fitting. Providing and fitting of rain pipe over the winch machine to secure the stem rod and machinery. Loading the gate structure along with winch machine on the mechanical transport for carrying to site of installation. Unloading the gate structure at road side then shifting to the site of installation. Installation of gate structure by way of lowering the leaf structure into the sliding grooves using skilled manual labour and hydra or other suitable mechanical means. Drilling requisite no. of holes in hoisting channels at site. Job further includes providing and fitting of fasteners to the embedded frame of the gate. Fitting of winch machine on the supporting channel and connecting the stem rod to the leaf structure after ensuring the proper alignment/gravity of the gate structure. Complete painting of gate structure with one coat of red oxide primer and two coats of superior quality enamel paint (Asian paints/ Kansai Nerolac paints/ Berger paints/ equivalent Reputed make ). The complete job includes cost of material, (skilled/unskilled) labour charges, loading & unloading, to &fro carriage, generator charges, testing and installation and hire charges of the hydra, tools & tackles used during the execution of job. Complete Job. 4) Gate at RD :4000m of Naj Canal : Fabrication and installation of a new Gate at RD :4000m of Naj Canal to regulate irrigation water by way of Fabrication of leaf structure of size 0.70mX0.90m (approx.) using the ISMC 75 channel size with vertical & horizontal cross members for support by way of cutting as per required size and then welding using superior quality electrodes. The leaf is to be fabricated with 3 number horizontal supports and 3 number vertical supports at equidistance from each other. The supports should be fabricated out of ISMC 75 channel. Providing and welding the MS sheet of 6 mm thickness on the frame of fabricated MS channel. Providing and fixing of rubber seals(reputed make) with MS Flat as per design requirement with nuts&bolts and also ensure the seal is continuous all around to prevent leakages. The Job also includes complete fabrication of outer frame MS structure of size (0.70m X1.80m) by MS channel of ISMC 125 consisting of groove channels, base channels and checking it for trouble free operation. Top hoisting channel consisting of 2 number of ISMC 125 of length 1.20 meters each. Fabrication of L shaped clamps attaching stem rod attachment during up and downward moment of gate. Fabrication, providing & fitting of 03 Ton capacity manually operated, worm gear type winch machine along with stem rod and base plate of 10 mm thickness. Oiling and greasing the gear and bearings mechanism before fitting. Providing and fitting of rain pipe over the winch machine to secure the stem rod and machinery. Loading the gate structure along with winch machine on the mechanical transport for carrying to site of installation. Unloading the gate structure at road side then shifting to the site of installation. Installation of gate structure by way of lowering the leaf structure into the sliding grooves using skilled manual labour and hydra or other suitable mechanical means. Drilling requisite no. of holes in hoisting channels at site.Job further includes providing and fitting of fasteners to the embedded frame of the gate. Fitting of winch machine on the supporting channel and connecting the stem rod to the leaf structure after ensuring the proper alignment/gravity of the gate structure. Complete painting of gate structure with one coat of red oxide primer and two coats of superior quality enamel paint (Asian paints/ Kansai Nerolac paints/ Berger paints/ equivalent Reputed make ). The complete job includes cost of material, (skilled/unskilled) labour charges, loading & unloading, to &fro carriage, generator charges, testing and installation and hire charges of the hydra, tools & tackles used during the execution of job. Complete Job 5) Gate at RD :4000m of Naj Canal : Fabrication and installation of a new Gate at RD :4000m of Naj Canal to regulate irrigation water by way of Fabrication of leaf structure of size 1.20mX0.90m (approx.) using the ISMC 75 channel size with vertical & horizontal cross members for support by way of cutting as per required size and then welding using superior quality electrodes. The leaf is to be fabricated with 3 number horizontal supports and 3 number vertical supports at equidistance from each other. The supports should be fabricated out of ISMC 75 channel. Providing and welding the MS sheet of 6 mm thickness on the frame of fabricated MS channel. Providing and fixing of rubber seals(reputed make) with MS Flat as per design requirement with nuts &bolts and also ensure the seal is continuous all around to prevent leakages. The Job also includes complete fabrication of outer frame MS structure of size (1.20m X1.80m) by MS channel of ISMC 125 consisting of groove channels, base channels and checking it for trouble free operation. Top hoisting channel consisting of 2 number of ISMC 125 of length 1.70 meters each. Fabrication of L shaped clamps attaching stem rod attachment during up and downward moment of gate. Fabrication, providing & fitting of 03 Ton capacity manually operated, worm gear type winch machine along with stem rod and base plate of 10 mm thickness. Oiling and greasing the gear and bearings mechanism before fitting. Providing and fitting of rain pipe over the winch machine to secure the stem rod and machinery. Loading the gate structure along with winch machine on the mechanical transport for carrying to site of installation. Unloading the gate structure at road side then shifting to the site of installation. Installation of gate structure by way of lowering the leaf structure into the sliding grooves using skilled manual labour and hydra or other suitable mechanical means. Drilling requisite no. of holes in hoisting channels at site.Job further includes providing and fitting of fasteners to the embedded frame of the gate. Fitting of winch machine on the supporting channel and connecting the stem rod to the leaf structure after ensuring the proper alignment/gravity of the gate structure. Complete painting of gate structure with one coat of red oxide primer and two coats of superior quality enamel paint (Asian paints/ Kansai Nerolac paints/ Berger paints/ equivalent Reputed make ). The complete job includes cost of material, (skilled/unskilled) labour charges, loading & unloading, to &fro carriage, generator charges ,testing and installation and hire charges of the hydra, tools & tackles used during the execution of job. Complete Job 6) Gate at D1 at RD :1000m of Naj Canal : Fabrication and installation of a new Gate at D1 at RD:1000m of Naj Canal to regulate irrigation water by way of Fabrication of leaf structure of size 0.70mX0.70m (approx.) using the ISMC 75 channel size with vertical & horizontal cross members for support by way of cutting as per required size and then welding using superior quality electrodes. The leaf is to be fabricated with 3 number horizontal supports and 3 number vertical supports at equidistance from each other. The supports should be fabricated out of ISMC 75 channel. Providing and welding the MS sheet of 6 mm thickness on the frame of fabricated MS channel. Providing and fixing of rubber seals(reputed make) with MS Flat as per design requirement with nuts &bolts and also ensure the seal is continuous all around to prevent leakages. The Job also includes complete fabrication of outer frame MS structure of size (0.70m X1.40m) by MS channel of ISMC 125 consisting of groove channels, base channels and checking it for trouble free operation. Top hoisting channel consisting of 2 number of ISMC 125 of length 1.20 meters each. Fabrication of L shaped clamps attaching stem rod attachment during up and downward moment of gate. Fabrication, providing & fitting of 03 Ton capacity manually operated, worm gear type winch machine along with stem rod and base plate of 10 mm thickness. Oiling and greasing the gear and bearings mechanism before fitting. Providing and fitting of rain pipe over the winch machine to secure the stem rod and machinery. Loading the gate structure along with winch machine on the mechanical transport for carrying to site of installation. Unloading the gate structure at road side then shifting to the site of installation. Installation of gate structure by way of lowering the leaf structure into the sliding grooves using skilled manual labour and hydra or other suitable mechanical means. Drilling requisite no. of holes in hoisting channels at site. Providing and fixing of rubber seals(reputed make) with MS Flat as per design requirement with nuts&bolts and also ensure the seal is continuous all around to prevent leakages. Job further includes providing and fitting of fasteners to the embedded frame of the gate. Fitting of winch machine on the supporting channel and connecting the stem rod to the leaf structure after ensuring the proper alignment/gravity of the gate structure. Complete painting of gate structure with one coat of red oxide primer and two coats of superior quality enamel paint (Asian paints/ Kansai Nerolac paints/ Berger paints/ equivalent Reputed make ). The complete job includes cost of material, (skilled/unskilled) labour charges, loading & unloading, to &fro carriage, generator charges, testing and installation and hire charges of the hydra, tools & tackles used during the execution of job. Complete Job 7) Gate at Minor of D1 at RD :0m of Naj Canal : Fabrication and installation of a new Gate at Minor of D1 at RD :0m of Naj Canal to regulate irrigation water by way of Fabrication of leaf structure of size 0.60mX0.60m (approx.) using the ISMC 75 channel size with vertical & horizontal cross members for support by way of cutting as per required size and then welding using superior quality electrodes. The leaf is to be fabricated with 3 number horizontal supports and 3 number vertical supports at equidistance from each other. The supports should be fabricated out of ISMC 75 channel. Providing and welding the MS sheet of 6 mm thickness on the frame of fabricated MS channel. Providing and fixing of rubber seals(reputed make) with MS Flat as per design requirement with nuts &bolts and also ensure the seal is continuous all around to prevent leakages. The Job also includes complete fabrication of outer frame MS structure of size (0.60m X1.20m) by MS channel of ISMC 125 consisting of groove channels, base channels and checking it for trouble free operation. Top hoisting channel consisting of 2 number of ISMC 125 of length 1 meters each. Fabrication of L shaped clamps attaching stem rod attachment during up and downward moment of gate. Fabrication, providing & fitting of 03 Ton capacity manually operated, worm gear type winch machine along with stem rod and base plate of 10 mm thickness. Oiling and greasing the gear and bearings mechanism before fitting. Providing and fitting of rain pipe over the winch machine to secure the stem rod and machinery. Loading the gate structure along with winch machine on the mechanical transport for carrying to site of installation. Unloading the gate structure at road side then shifting to the site of installation. Installation of gate structure by way of lowering the leaf structure into the sliding grooves using skilled manual labour and hydra or other suitable mechanical means. Drilling requisite no. of holes in hoisting channels at site. Providing and fixing of rubber seals(reputed make) with MS Flat as per design requirement with nuts &bolts and also ensure the seal is continuous all around to prevent leakages. Job further includes providing and fitting of fasteners to the embedded frame of the gate. Fitting of winch machine on the supporting channel and connecting the stem rod to the leaf structure after ensuring the proper alignment/gravity of the gate structure. Complete painting of gate structure with one coat of red oxide primer and two coats of superior quality enamel paint (Asian paints/ Kansai Nerolac paints/ Berger paints/ equivalent Reputed make ). The complete job includes cost of material, (skilled/unskilled) labour charges, loading & unloading, to &fro carriage, generator charges ,testing and installation and hire charges of the hydra, tools & tackles used during the execution of job. Complete Job 1.The contractor/firm must ensure safety mechanisms for the workers and material involved during the execution of job at the site, as the sole responsibility lies with the contractor/firm. 2.The tenderers are requested to visit the site and quote the rates as per site conditions. Any modifications/ alterations of the job, absolutely necessary if required at the time of execution may be done as per actual site conditions.