REPAIRS TO ROAD AND ROAD SIDE FURNITURE AT CERTAIN PLACES AT VSN CHILODA

Amount

M&L Repair to potholes any depth, not exc 1 sq m each including sweeping to make free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat with bituminous primer @ 5 kg per 10 sq m, putting in Premix bituminous macadam with minimum binder 4% (VG-30) well rammed and sealed with binder 9.8kg/10Sqm binded with 0.09cum of stone chipping of 6.3mm size and well rammed (including supply of premix maccadam , binder and chipping) depth of potholes exc 30 mm all as specified and as directed by Engineer-in-Charge

Scarifying or picking graveled, macadam or bituminous macadam surfaces to a depth exc 50mm and n.exc 100mm in area n. exc 400sqm and disposal of scarified material complete all as specified

Scarifying or picking graveled, macadam or bituminous macadam surfaces to a depth exc 50mm and n.exc 100mm in area exc 400sqm and disposal of scarified material complete all as specified

M&L Preparation of existing black top surfaces of road by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning cleaned surfaces with gunny bags to remove all loose dirt etc complete all as specified and directed

M&LTack coat with bituminous primer using paving bitumen VG-10 at the rate 5kg/10 sqm complete all as specified and directed

M&LTack coat with bituminous primer using paving bitumen VG-10 at the rate 10kg/10 sqm complete all as specified and directed

M&L Premix bituminous macadam (consolidated thickness) upto 75mm thick with 4% binder content ( paving bitumen VG-30) by weight of total mix laid and rolled with 8-10 tonne Power Roller to required gradient and camber complete all as specified and as directed. Note : For 1.00 & 2.00 (i) Job mix formula for the Premix bituminous macadam shall be obtained from the institutes specified in the Particular Specifications. (ii) In case, as per actual design mix, the binder content by weight of total mix is less than 4 %, price adjustment shall be made as per average rate of all the purchase vouchers for bitumen pertaining to the work under this contract. If total binder content as per design mix is more than 4 %, no price adjustment shall be made for the same.

M&L Bituminous premixed semi dense asphaltic concrete (SDAC) 30mm thick consolidated thickness with 5.5 % paving bitumen (VG-30) as binder content by weight of total mix, using hot mix plant and mechanical paver a approved by GE, rolled and compacted with 8 to 10 tonne Vibrator Power Roller to required gradient and camber, complete all as specified and as directed. Note : (i) Job mix formula for Premixed semi dense asphaltic concrete shall be got tested from the institutes specified in the particular specifications. (ii) Mix shall be obtained from hot mix plant and spreading shall be done by using mechanical paver. (iii) In case as per actual design mix, the binder content by weight of total mix is less than 5.5%, price adjustment shall be made as per average rate of all the purchase vouchers for bitumen pertaining to the work under this contract. If total binder content as per design mix is more than 5.5%, no price adjustment shall be made for the same complete all as specified and directed

M&L Prepration of black bituminous surfaces of road and applying 2.0 to 2.5mm thick as per IRC pattern with thermoplastic road marking point of approved quality white /golden / yellow as approved colour shade and make conforming to BIS: 3262-1989 with special applicator machine exceeding 10cm wide complete all as per manufacturer's instructions any as approved by GE Note : The rate included for provision of red signals to keep traffic from wet paint , cleaning road surfaces and working during odd hours when traffic is light

M & L Preparation of old painted brick, stone, plaster surfaces of any description over 10cm width or girth not otherwise described for and applying one coat of synthetic enamel paint complete all as specified

S&F Cat Eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA strip lens reflector of model No. DA 972.0 fixed with and including MS stud of suitable size as per manufactures instructions complete as in rpairs all as specified and directed

S&F Solar cateye aluminium alloy shall (100% water proofing design according to 65) of size 125mmx125mmx25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4v/0.3 watt one NI-ed rechargable battery (1.2V/1600MA) consisting of super bright LED with 10000 to 18000 mcd complete as per manufactures instruction as in repairs all as specified

S&F Road safety convex mirror made up of polycarbonate reflective with hood for road turning intersection, curves, T junction etc un breakable & strong mounted on and body made of ABS/Fiber/ Plastic of size 100cm dia fixed over & including 80mm bore MS pipe of 2.4 m length duly powder coated fixed with adjustable clamp pole fixed in PCC 1:2:4 type B1 using 20mm graded crushed stone aggregate block of size 450mmx450mmx450mm deep including necessary excavation earth work complete as in repairs all as specified

S&F Solar delineator made from poly carbonate & toughened aluminium alloy body 145mm high , 80mm dia solar reflector , 80mm high compressing of super bright LESs giving 360degree view with solar panel 2.5V, 120mm approx, 1.25V rechargeable battery and high intensity rectro reflective band , 1" wide for extra visibility , mounted on and including 65mm dia powder coated MS pipe , 750mm long fitted with in and including provision of PCC 1:2:4 type B1 using 20mm graded crushed stone aggregate block of size 200mmx200mmx300mm deep including necessary excavation earth work complete as in repairs all as specified

S&F Metal tubular delineator made out of ABS round body fitted with 2 Nos 65mm dia highly reflective reflectors made out of PMMA and mounted on 45/50mm dia mild steel pipe of 600mm height duly powder coated and thermoplastic elastomer 3 bands of green, red and yellow reflector radium tape of 25mm wide strips with anti-theft steel net for reflector protection including embedding in PCC 1:2:4(150mmx150mmx300mm) type B1 complete as in repairs all as specified

M/S Anil Enterprises (BID ID -3208664)

DMA PROJECTS (BID ID -3202957)