PLWSS and House Hold Connection to Habitation Ootpur, Paloti and Makan Kular in G.P Ootpur in Tehsil Joginder Lad Bharol District Mandi H.P Under JJM SH Construction of Pump House W.C and Electrical installation in Pump House

Amount

Excavation in foundation and trenches etc. up to all depths and in all classification of earth work such as pick work, jumper work, saturated soil including bailing or pumping out of water, blasting soft or hard rock or chiselling / wedging out of soft / hard rock , where blasting is prohibited, in all lifts including trimming and dressing of sides, levelling of beds to correct grade including shoring, strutting , planking, timbering and dewatering where ever required. Stacking usable and unusable material /soil seperataly , returning the usable soil in 15cm layers by ramming and watering and then dISOsing of all surplus excavated soil/ unusable material as directed within all leads/ lifts complete in all respects within all leads and lifts as per direction of the Engineer-in-Charge.

Providing and laying cement concrete 1 : 1½ : 3 (1 Cement :1½ Sand : 3 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of from work in suspended floor ,Dome, roofs, lendings and shalves and thier suports balconies,beem griders and bressumers and cantiliver upto floor two level complete with in all leads and lifts as per direction of the Engineer-in-Charge

Providing and laying cement concrete 1 : 2 : 4 (1Cement : 2 Sand : 4 graded stone aggregate 20 mm nominal size)and curing complete excluding cost of form work and re-inforcement for reinforced concrete in suspended floor ,roofs, landings and shalves and their supports balconies, beam griders and bressumers and cantiliver upto floor two level complete with in all leads and lifts as per direction of the Engineer-in-Charge.

Providing tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level in all respect complete with in all leads and lifts as per the direction of Engineer-in-Charge.

Providing form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5mm,so as to give a fair finish including centring,shuttering,strutting and propping etc. with wooden battens and ballies,height of propping and centring below supporting floor to ceiling not exceeding 4.00 Mtrs. and removal of same for in situ-reinforced concrete & plain concrete work in:-

Slopping of Battering surface including folded plates where inclination to horizontal plane does not exceeds 30 degree with in all leads and lifts as per the direction of Engineer-in-Charge.

Beams, cantilivers, girders and lintels sides and soffits of beams,beam haunchings cantilivers, girders, bressumers and lintels not exceeding 1 metre in depth with in all leads and lifts as per the direction of Engineer-in-Charge.

Flat surfaces such as soffits of suspended fioors roofs landing and the like . Floors etc up to 200 mm in thickness. complete in all respect and as per the entire satisfaction of Engineer-In-Charge.

Edge of slabs & Breaks in floors & walls under 20 cm wide complete in all respect and as per the entire satisfaction of Engineer-In-Charge.

Providing and laying cement concrete 1 : 6 :12 (1Cement : 6 Sand :12 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work in foundation and plinth complete with in all leads & lifts as per direction of Engineer-in-Charge.

Random rubble masonry/ polygonal rubble masonry (uncoursed/brought to courses) with hard stone of approved quality in foundation & plinth including levelling up with cement concrete 1 : 6 :12 (1 Cement : 6 Sand : 12 graded stone aggregate) in CM 1 : 6 (1 Cement : 6 Sand) complete with in all leads and lifts.

Boulder filling under floor complete with in all leads and lifts.

Brick work using common burnt clay building bricks in super structure above plinth level upto floor two level in cement mortor 1: 4 ( 1 Cement : 4 Sand ) Ist class brick complete with in all leads and lifts.

Providing wood work in frames of door and window 2nd class Deodar wood with in all leads and lift,carrige of material and other incidental charges complete in all respect as per the direction of Engineer-in-charge

Providing and fixing panneled glazed or panneled and glazed shutters for doors, windows and clerestory windows, including black enamelled iron butt hinges with necessary screws 40 mm thick 2nd class deodar wood complete with in all leads & lifts as per direction of Engineer-in-Charge.

Providing & fixing M.S. grills of required pattern in wooden frame of window etc. with M.S. flats, square or round bars with round headed bolts and nuts by screws plain grill complete with in all leads and lifts.

Cement concrete flooring 1 : 2 : 4 (1 Cement : 2 Sand : 4 graded stone aggregate 20 mm nominla size) laid in one layer finished with a floating coat of neat cement 40 mm thick complete with in all leads and lifts.

6 mm thick cement plaster to ceiling in cement mortar 1 : 3 (1 cement:3 sand)

15 mm cement plaster in single coat on rough side of brick/ concrete/ stone wall for interior plastering upto floor two level including arrises internal rounded angles, chamfers and or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortor 1:6 (1 Cement : 6 Sand) complete with in all leads & lifts as per direction of Engineer-in-Charge.

Flush pointing on brick work with cement mortor 1: 3 (1 Cement : 3 Sand) with in all leads and lifts.

White washing with lime on un-decorated wall surfaces (with two coats) to give an even shade including thoroughty brooming the surface to remove all dirt, dust, mortor dirt and other foreign matter with in all leads and lifts.

Applying priming on new wood and wood based surface after and including preparing the surface by thoroughly cleaning oil, grease, dust and other foreign matter, sand preparing and knotting. Ready mixed paint brushing wood primer pink with in all leads and lifts.

Painting two coats ( excluding priming coat ) on new wood and wood based surfaces with enamel paint to give even shade including cleaning the surface of dust and other foreign matter, sand preparing and stopping with enamel paint other than white with in all leads and lifts.

Providing and fixing oxidized M.S. sliding dooor bolts with nuts and screws etc. complete 300 x16 mm complete with in all leads & lifts as per direction of Engineer-in-Charge.

Providing and fixing anodised M.S. Tower bolts (Barrel type) with necessary screws etc.complete .

Providing and fixing Oxidized M S Handle with necessary screws etc complete. 125 mm

Providing plinth protection 50 mm thick in cement concrete 1 : 3 : 6 (1 Cement : 3 Sand : 6 graded stone aggregate 20 mm nominal size) including finishing the top surface of concrete smooth with in all leads and lifts.

Providing under layer for plinth protection of 75 mm thick (unconsolidated) bed of dry brick /stone aggregate 40 mm nominal size) well remmed and consolidated and grouted with fine sand including preparation of ground with in all leads and lifts.

Half brick masonry in common brunt clay building bricks in cement mortor 1 : 4 ( 1 Cement : 4 Sand ) 2class bricks complete with in all leads and lifts.

White glazed tiles 6 mm thick flooring cement mortar 1 : 3 (1cement : 3 sand) complete with in all leads and lifts.

White glazed tiles 6 mm thick in skirting risers of steps and dado 12 mm thick cement mortar 1 : 3 (1cement : 3 sand) complete with in all leads and lifts.

Distempering with dry distemper of approved brand and manufacture (two coats) and of required shade on undecorated wall surfaces to give an even shade sand papered smooth with in all leads and lifts.

Providing and fixing automatic flushing cistern with a pair of C.I. or M.S. brackets complete with fittings including Syphonic apparatus, mosquito proof lid, unions and coupling for connections with inlet, outlet and overflow pipes including cutting holes and making food the same (overflow pipe to be measured and paid for separately) Viterous china 5 ltrs. capacity.

Providing and fixing vitreous China wash, down water closet ( European type WC pan) with integral "P" or "S" trap including jointing the trap with soil pipe in cement mortar 1:1(1cement :1 Sand)( Seat and cover to be measured and paid for separately) white colour Anglo Indian ( Universal Closet) complete in all respect in all leads and lifts and to the entire satisfaction of Engineer-in-charge .

Providing and fixing 100 mm size P or S trap for water closet ( Squatting Pan) including jointing the trap with the pan and soil pipe in cement mortar 1:1 ( 1cement : 1 sand) Sand cast iron complete in all respect in all leads and lifts and to the entire satisfaction of Engineer-in-charge .

Providing & fixing viterious china wash basin with single hole for pillar tap with CI or MS bracket painted white including cutting hole inculding good the same excluding fitting cera sanitary work (cornet) white 550 x 400 mm white in all respect in all leads and lifts and to the entire satisfaction of Engineer-in-charge .

Providing & fixing viterious china pedestral for wash basin complete recessed at the basic for reception of pipe and fittings cera sanitary work (carnet) white (Vitrious China in white colour) n all respect in all leads and lifts and to the entire satisfaction of Engineer-in-charge .

Providing and fixing water storage tank Sintex having of capacity of 500 ltrs. with necessary fitting i/c over flow pipe, Scour pipe etc. inlet and outlet and inside paint of approved quality complete including hoisting complete in all respect in all leads and lifts and to the entire satisfaction of Engineer-in-charge .

Providing and fixing on wall face PVC (D - Plast) rain water pipes of working pressure not less 4.5 Kg/Sqcm including fitting the joints with approved adhesive complete with in all leads , lifts and carriage of materials.110 mm nominal bore.

Providing & and fixing on wall faces PVC door bend (D-plast) with oval access door inserstion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing wit approved adhesive complete 75 mm nominal bore.

Providing and fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fittings and clamp including making good the wall ceiling and floor in all leads and lifts.) 15 mm nominal bore

Providing and fixing full way wheel valve 15 mm dia Gun metal.

Providing and fixing C. I cowl 100 mm dia .

Providing and fixing brass bib tap (superior qualityor heavy type) 15 mm dia.

Providing & Fixing CP Brass Soap Dish with CP breckets fixed to wodden plugs with CP brass screws complete in all respect in all leads and lifts.

Supplying and Fixing of Cast Iron man hole cover with frame 455 x 610 mm rectangular C.I. cover (light duty) single seal pattern the weight of cover 23 Kg and weight of frame 15 Kg. The total weight of cover and frame to be not less than 38 Kg complete in all respect in all leads and lifts and entire satisfaction of the Engineer-in-Charge.

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.

Group -C

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.

2x1.50 Sqmm.

2x2.50 Sqmm.

(a) Supplying and fixing 3 pin 5/6 amps. Socket outlet on the exists switch box/covers including connections etc. as required.

(b) Supplying and fixing 2 way 5/6 amps. Tumbler/piano type switch on the existing switch box on the switch box/cover including connections etc. as required.

(a) Supplying and fixing 3 pin 15/16 amps. Socket outlet on the exists switch box/covers including connections etc. as required.

(b) Supplying and fixing 15/16 amps. Tumbler/piano type switch on the existing switch box on the switch box/cover including connections etc. as required.

Supplying and fixing wooden box of following size (nominal) on surface or recess with suitable size of phenolic laminated sheet cover of in front as required.

229 mm x 102 mm x 60 mm deep

203 mm x 152 mm x 60 mm deep

Providing and Supplying CFL 1 x 23 watt of reputed make in all leads and lifts.

Providing and Supplying of CFL 1 x 5 watt in all of reputed make in leads and lifts.

Supplying and Fixing 5 Amps to 32 Amps rating, 240 Volts, L series miniature circuit breaker of following poles in the existing MCBDB complete with connections, testing and commissioning etc. as required Cat - A. (Single Pole)

Supplying and fixing celing rose on existing junction box/wooden block including connections etc.as required.

Supplying and fixing following rating , double pole , 240 watts , isolator in the existing MCB DP complete with connections (testing and commissioning etc. as required (63 amp. CAT A)

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-

Single door-16 way

Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required:-

Ceiling Fan 1400 mm sweep, Category-A

Providing and fixing ultra slim decorative extruded box fixture with domestic electronic ballast, snap-on installers, suitable for 28 watt FTL (T5), complete with all accessories (including one No. T-5 Tube), connections, testing and commissioning etc. as required.

1 x28 watt-FTL(T5) (Category-A)

Providing and Fixing of LED 1 x 15 Watt of reputed make complete in all respect and to entire satisfaction of the Engineer-in-Charge.

Providing and Fixing of street light with LED of 60 Watts for pump house and Jack well complete in all respect and to entire satisfaction of the Engineer-in-Charge.

Providing and fixing two core service wire 6 sqm thick with in all leads and lifts and to entire satisfaction of the Engineer-in-Charge.

NAVEEN KUMAR

Vijay Kumar