Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.2 LAccepted-AOC HARSH INFRASTRUCTURE NEAR DWARKADISH PETROLEUM NANDANA DEVBHOOMI DWARKA JAMNAGAR GUJARAT 361315 | DEVBHUMI DWARKA | GUJARAT | 361315 | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹42.9 L+₹4.3 L (11.3%)Rejected-Finance 4 A RUKSHMANI PARK SOCIETY OPP SAMA WATER TANK NEW SAMA ROAD VADODARA 390 008 | VADODARA | VADODARA | GUJARAT | 390008 | L2 | Rejected-Finance BEING L2 | |
| 3 | L3₹44.5 L+₹5.9 L (15.3%)Rejected-Finance | L3 | Rejected-Finance BEING L3 |
Tender Value
₹48.2 L
EMD Value
₹96,500
Closing Date
9 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF BARODA
GE AF BARODA PO DARJIPURA BARODA 390022
IMPROVEMENT OF SINGLE OFFRS ACCN BLDG NO P-56 AT MAKARPURA
2024_MES_641792_1
8881/E8
Open Tender
Civil Works
Item Rate
180 days
GE AF BARODA
AS PER TENDER DOCUMENTS AND NIT
4 documents required · 4 mandatory
₹500
GE AF BARODA
₹96,500
Yes
30 Mar 2024
12 Feb 2024
16 Mar 2024
12 Feb 2024
9 Mar 2024
26 Feb 2024
13 Feb 2024 - 19 Feb 2024
Amount
M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and dircted.
M&L for Anodised aluminium frame (Powder Coated, Min thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including fittings, joining cleat and suitable rubber beading for fixing etc. complete all as specified and directed.
S & F Anodised aluminium sliding windows, all as given here-in-after complete all as specified and directed. Frame:- Three track section shall be of weight not less than 1.060 kg/m. Shutter:- Consists of 03 Nos Shutters i.e 02 Nos of Glazed shutters and 01 No of Gauzed shutter. Sections of shutter (stiles and rails) sections shall be of weight not less than 0.562 kg/m. Builders hardware:- Standard locking device for glazed shutters.
Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing the rubbish outside MD land complete all as specified and as directed
M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15 mm thick in CM 1:6 complete all as specified and directed.
M&L for Glazed ceramic coloured tiles of size 450 x 300 mm 7-8 mm thick white on vertical surfaces such as dado / skirting etc set and jointed in neat cement slurry and pointed in white cement to match incl 10mm thick rendering in cm 1 :4 as backing coat finished, even and fair to receive tiles etc complete all as specified and dircted.
M&L for light shade coloured Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade incl screed bed 15mm thick in CM (1:6) complete all as specified and dircted.
M&L for light shade coloured Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including backing coat 10 mm in CM 1:4 complete all as specified and directed.
Demolition of Stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar in floors, aprons etc complete all as specified and directed.
M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.
Description all as per item No 10.00 here-in-before but on vertical surfaces such as dado / skirting or on pillar etc complete all as specified and dircted.
M&L for mirror polishing on old or new surface of kota stone wherever required to give high gloss finish complete all as specified and directed.
Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and dircted.
M&L for 40mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in sub base for laying of floor finishes complete all as specified and directed.
M&L for Cement concrete type C-2 1:3:6 (using 40mm graded crushed stone aggregates) as in 75 mm thick plinth protection , finished surfaces even and smooth without using extra cement, complete all as specified and as directed
Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing etc., and making good, cutting not exc 10 cm girth complete all as specified and dircted
S & F 15mm bore Unplasticised PVC pipes including all fittings of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc.,complete including taking down existing pipeline complete all as specified and as directed.
S & F 25mm bore Unplasticised PVC pipes including all fittings of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc including taking down existing pipeline complete all as specified and as directed.
S&F in repair Vitreous China wash basin, white flat back, size 580x450 mm including cutting for and pinning in ends of brackets or erecting stand with CP waste fittings and waste pipe complete all as specified and dircted
S&F in repairs pillar taps, fancy type (Swan Neck), with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shank and fly-nut, screws for iron pipe and fixed for 15mm dia of pipe complete all as specified and dircted
S&F in repair bib cock with wall flange,cast copper alloy, fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15mm dia of pipe complete all as specified and dircted
S&F in repairs Angular stop cock with adjustable wall flange, cast coper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions, and fixed for bore bore of pipe complete all as specified and dircted
S&F Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and dircted.
S&F in repair PVC connection 15mm dia with PTMT nut of length 450mm long complete all as specified and directed
S & F in repair shower arm 15mm size 195 mm long with bend of 45 degree with flange of PTMT any colour(Min weight 40 gms) complete all as specified and dircted
S&F in repair brass chromium plated shower rose 125mm size any colour for fixing with 15mm pipe in repairs complete all as specified and dircted
S&F in repair Vitreous china water closet pan ( pedestal pattern), white including fixing bolts etc including plastic water closet seat, black/white closed pattern with flat bottom and cover and mild steel chromium plated hinging device in repair complete all as specified and dircted.
S & F in repairs PVC valve less flushing cistern syphonic action type, low level, white, with inlet, ball valve, float & handle 10 litre capacity including brackets, flush pipe and all accessories complete all as specified and dircted
S&F in repair health faucet of approved quality complete all as specified and directed.
S&F jet spray ss complete set for EWC complete all as specified and directed.
S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed
S&F in repair Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and dircted
S&F in repair 20mm dia stainless steel tubular curtain rod complete all as spd alongwith brackets for curtain rod ornamental fancy type suitable for fixing matching with curtain rod complete with fixing screws complete all as specified and directed.
Taking down chowkats or frames wooden/steel (without taking of shutter from the frame) not exc. 1.5 Sqm each complete all as specified and directed
Taking down chowkats or frames wooden/steel(without taking of shutter from the frame) exc. 1.5 Sqm each and not exc 4 Sqm each complete all as specified and directed
Taking down shutters of any description exc 1 Sqm & nexc 2 Sqm each complete all as specified and directed
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specifications & drawings complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.
M&L 2nd class hard wood plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supply & fixed complete all as specified and directed
S&F 35 mm thick flush doors, solid core with prelaminated exterior grade with both side decorative choice lamination with lipping/frame to match incl. all necessary fittings etc complete all as specified and directed
S&F 2nd class hard wood 35mm glazed and skeleton shutter, open rebated and prepared to receive glass, gauze etc (with vertical sash bars), edges of framing plain, chamfered or rounded,fitted with cut and retired beads for securing glass etc size of membrane of shutter as specified in SSR part I, Section 8, clause 8.20 (a) and fitted to chowkats complete all as specified and dircted.
S&F 18/19mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, including teak wood lipping 6mm thick fixed with screws to timber frame work complete all as specified and directed
S&F 100mm size butt hinges medium weight cold rolled mild steel and fixed (ISI Marked) complete all as specified and dircted
S&F continuous piano hinges mild steel bright finish or electrogalvanised width of flap 30mm complete all as specified and directed
S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor over all length 150mm complete all as specified and as directed
S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed
S&F 200 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and dircted
S&F 150mm long aluminium handles, cast type, anodised complete all as specified and dircted
S&F standard quality door eye viewer with 200 degree lens and easy to install 30mm to 55 mm thick door complete all as specified and directed
S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with wooden beadings complete all as specified and dircted
S&F 4.8 mm thick frosted on one side sheet glass fixed with and including necessary rubber gasket and aluminium beading complete all as specified and directed
S&F 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and dircted.
M&L for 10mm thick rendering on fair faces brick work or concrete surfaces in cement mortar 1:6 finished surfaces even and smooth (without using extra cement) Complete all as specified and as directed
M&L for rendering in two layers (i.e) in CM 1:6, 10mm thick as first layer in and CM 1:4, 5mm thick as 2nd layer mixed with and including water proofing compund on stone masonry surfaces or surfaces other than fair face of brick or on concrete surfaces finished even and smooth without using extra cement complete all as specified and dircted.
M&L for 5 mm thick rendering on ceiling surfaces of concrete in cement mortar 1:4 finished even and smooth (without using extra cement) including taking down existing cement plaster complete all as specified and as directed
M&L for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper (shade as approved by GE) over and including two coats of Birla white putty 3 mm thick including necessary priming coat complete all as specified and directed
M&L for preparation of newly plastered wall surfaces and applying two coats of exterior ACRYLIC emulsion paint (Colour as approved by GE) including necessary priming coat as per manufacturer instructions complete incl cleaning window glasses, joinery, electric fittings, wiring etc of drops and sphalshes and cleaning premises clean and tidy complete all as specified and as directed
M&L for preparation of newly plastered ceiling surfaces and applying two coats of oil bound distemper (shade as approved by GE) over and including two coats of Birla white putty 3 mm thick including necessary priming coat complete all as specified and directed
M&L for complete removal of existing treatment from wall surfaces by scraping down and washing with water to the satisfaction of Engineer-in-Charge and applying two coats of Oil Bound Emulshion distemper over and including applying 3mm thick wall care white putty (as approved by GE) including cleaning window glasses, joinery, electric fittings, wiring etc of drops and splashes and cleaning premises clean and tidy complete all as specified and as directed
M&L for complete removal of existing treatment on ceiling surfaces by scraping down and washing with water to the satisfaction of Engineer-in-Charge and applying two coats of Oil Bound Emulshion distemper over and including applying 3mm thick wall care white putty (as approved by GE) including cleaning window glasses, joinery, electric fittings, wiring etc of drops and splashes and cleaning premises clean and tidy complete all as specified and as directed
M&L for complete removal of existing treatment by scraping down completely on brick/stone walls/concrete surfaces thoroughly, rubbing down washing with water to the entire satisfaction of Engineer-in-Charge and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) as per manufacturers instruction complete including cleaning window glasses, joinery, electric fittings, wiring etc of drops and splashes and cleaning premise clean and tidy complete all as specified and directed
M&L for Preparation of new surfaces of wood and wooden based material of any description, not otherwise described over 10 CM width or girth and applying two coats of synthetic enamel paint over and including one coat of pink primer including cleaning window glasses, joinery, electric fittings, wiring etc of drops and splashes and cleaning premises clean and tidy complete all as specified and directed
Preparation of old painted surfaces of wood and wood based material of any description, not otherwise described over 10 CM width or girth and applying one coat of synthetic enamel paint including cleaning window glasses, joinery, electric fittings, wiring etc of drops and splashes and cleaning premises clean and tidy complete all as specified and directed
M&L for preparation new or previously untreated steel surfaces of any description not otherwise described exceeding 10 cm width or girth and applying two coats of synthetic enameled paint over and including a coat of red oxide primer, cleaning glass,joinery etc. of drop & splashes complete all as specified and directed
M&L for forming jambs to openings in CM 1:4 including cutting, toothings and properly bonding into old work including facing and pointing to match existing work, complete all as specified and directed.
M & L for Chipping, chiselling surface mechanically with chipping machine and applying necessary treatment as under :- (1) Providing zinc rich primer for exposed reinforcement (2) Providing 50x50x3mm weld mesh and fixing the same with sheer connectors of 8 mm dia with epoxy resin. (3) Rendering the area with CM 1:3 with two layers of 15mm thickness each in small areas/patches complete all as specified and as directed.
M & L for crack repair work in walls as described here-in-after :- (1) Clean surface around crack, joint should be free from loose particles and dust, cutting 'V' shaped groove along the crack line by machine or manually, then clean the groove by wire brush to remove loose particles and then washed by water jet, and fixing nozzle and reparing cracks using Fosroc Rendroc CS chemical complete all as specified and directed. .
M & L for repair work in concrete column, beam and slab as described here-in-after :- (1) Cleaning the surface and removing all loose particles, dust,oil, paint and greace etc. (2) Removing all scale and corrosion deposits from the corroded steel surfaces. (3) Applying one coat of Zinc Primer over the cleaned re-bars. (3) Saturate the substrate with water to prevent absorption of water from the mix. (4) Pouring /pumping Microconcrete mix as required complete all as specified and dircted.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for(reinforcement cut as reqd to facilitate demolition) complete all as specified and directed.
Material and Labour for RCC 1:2:4 type B1 using 20mm graded stone aggregate for chajjas and similar works complete all as specified and directed. Note : Reinforcement and form work shall be measured and paid separately
M&L Form work to sides and soffits of chajjas and similar works for fair finished surfaces of concrete complete all as specified and directed.
M & L for mild steel TMT bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Taking down rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning for refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories) complete all as specified and dircted.
S&F PVC (SWR) soil waste , vent pipes in any length with or without ears, with rubber ring joints 75mm dia fixed to walls complete all as specified and dircted.
S&F PVC (SWR) soil waste , vent pipes in any length with or without ears, with rubber ring joints 110mm dia fixed to walls complete all as specified and dircted.
S&F PVC (SWR) bends any radius 75mm bore complete all as specified and dircted.
S&F PVC (SWR) bends any radius 110mm bore complete all as specified and dircted.
S&F single mirror bathroom cabinet moulded body and frame (made of strong and fine quality ABS) with hanged door (Size 16"x12") white in colour make as approved by GE fixed to wall with appropriate rawl plugs complete all as specified and dircted.
S&F Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed
Taking down carefully copper / Aluminium point wiring of light, fan, socket or power points complete including fixture and fittings, such as switches, ceiling roses, pendant holders, Batten holders, shades conical, fan regulators, light or power sockets etc and removing materials from site and making good disturbed surfaces of walls roofs etc complete all as specified and directed.
M&L for point wiring with using 1.5 Sqmm (nominal area) stranded copper conductor single core PVC insulated & unsheathed cable 1100 volts grade in and incl concealed medium grade PVC conduit and fittings with using new sunken type pressed steel box/terminal boxes for mounting fittings/junction boxes not less than 1.6 mm thick duly painted with two coats of black bituminous paint over a coat of red oxide primer with and incl all accessories and using 1.5 Sq mm (nominal area) stranded copper conductor single core conductor PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed for the following:-
Note for item No 84.00 : (i) The quoted rates shall be deemed to be inclusive for any cutting chases in brick walls/pillars etc for fixing of suncken boxes and flush it & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with existing surfaces and provision of covering modular sucken box and modular cover plate of any shape . (ii) Fittings like switches sockets regulators, lamp holders light fittings shall be measured and paid for separately under respective items of BOQ. (iii) The size of conduits shall be determined on permissible No of runs of wires as specified in SSR part I (2010) However minimum size of conduits shall be 20 mm dia (medium grade).
One light /Fan / Exhaust fan point controlled by one, one way switch.
One 3 pin 5 Amps socket outlet on same board with other switch.
One 3 pin 5 Amps socket outlet on independent board with cable of 1.5 sqmm size
One bell point controlled by one bell push
Description all as per item No. 84.00 here-in-before but wiring with 2.5 sqmm multistranded copper conductor unsheathed and 2.5 sqmm copper conductor unsheathed cable as earth continuity conductor for one 3 pin 15 Amps socket outlet point on independent board complete all as specified and directed
Supplying & fixing modular switch, single pole one way 6 Amps, 230 volts AC circuit complete all as specified and directed
Supplying & fixing modular switch, single pole one way 16 Amps, 230 volts AC circuit complete all as specified and directed
Supplying & fixing modular socket outlet, 6Amps, 5 pin, 230 volts AC circuit complete all as specified and directed
Supplying & fixing modular socket outlet, 6-16Amps, 3 pin, 230 volts AC circuit complete all as specified and directed
Supplying & fixing Bell push switch Modular type single pole one way 10 Amp 240 Volts. complete all as specified and directed
S&F door bell ding dong, multi tune, Chime and Buzzer. complete all as specified and directed
S/F in repair Fan Regulator 5 step Modular type 240 Volt complete all as specified and directed.
Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified and directed
Supply and fixing indoor decorative channel housing fitting slim LED batten 20 Watt with polycarbonate housing and diffuser AC 220-240 volts, 50 Hz and connecting with copper conductor flexible cable from ceiling rose to connector of the light, fixing the same with two Nos PVC square box complete including taking down old unserviceable complete all as specified and directed
Supply and fixing indoor decorative aesthetically designed Mirror light provided with high output PMMA diffuser for glare free light including LED lamp ( 10 watt) with provision of 2/3 core PVC copper conductor cable from ceilling rose to connector block , fixing the same with two Nos PVC square box complete ncluding taking down old unserviceable complete all as specified and directed
Supply and fixing LED security light luminaire 50 watt freedom , pressure die cast aluminum housing, heat resistant glass, IP66 protection, better optics for uniform distribtion complete with all fitting accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light including taking down old unserviceable light complete all as specified and directed
Supply and fixing bracket for security light made up of 25mm dia,1.60m long GI pipe, light grade, bent to required length, fixed to wall with two clamps made of 20 x 3 mm mild steel flat minimum 15cm long, 4 nos 8mm dia bolts with nuts complete ncluding taking down old unserviceable complete all as specified and directed
S&F Decorative wall mounting antique brass finish fixture with opal glass diffuser suitable for 9 watt LED filament Lamp B-22 base including lamp complete all as specified and directed.
Supply and fixing sheet metal enclosure SP with two pin and socket with one single pole MCB 25 Amps ,'B Curve 240 Volts complete all as specified and directed
S & F MCB DB 8 way sheet metal enclosure SPN 240 volts, 50 Hz, with IP-42 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete ncluding taking down old unserviceable complete all as specified and directed
Supply and fix MCB, single pole and neutral link (double pole) 240 volts 40 to 63 Amps capacity B series fixed in DB's complete all as specified and directed
Supply and fix MCB, single pole 240 volts 6 to 32 Amps capacity B series fixed in DB's complete all as specified and directed
Supply and fix MCB, single pole 240 volts 40 to 63 Amps capacity B series fixed in DB's complete all as specified and directed
M & L for sub main wiring using two single core 6 Sqmm fire retardant PVC insulated and unsheathed cable with copper conductor 1100 volts grade ISI marked drawn through and including PVC Casing Caping/PVC Conduit or in existing concealed conduit (as required & directed by Engr-in-Charge) with accessories like bends, tee, etc fixed on wall and ceiling including 6 Sqmm earth wire, FR PVC insulated & unsheathed and connecting to earth dolly including taking down existing wiring complete all as specified and directed. Note: (i) Two runs of 6 sqmm and one run of 6 sqmm earth wire and one run of PVC conduit / casing caping shall be measured as one RM. (ii) Necessary plastering to the disturbed surface of wall and distempering /white washing to match the existing colour shall be included in the quoted rate.
M & L for sub main wiring using two single core 4 Sqmm fire retardant PVC insulated and unsheathed cable with copper conductor 1100 volts grade ISI marked drawn through and including PVC Casing Caping / PVC Conduit or in existing concealed conduit (as required & directed by Engr-in-Charge) with accessories like bends, tee, etc fixed on wall and ceiling including 4 Sqmm earth wire, FR PVC insulated & unsheathed and connecting to earth dolly including taking down existing wiring complete all as specified and directed. Note: (i) Two runs of 4 sqmm and one run of 4 sqmm earth wire and one run of PVC conduit / casing caping shall be measured as one RM. (ii) Necessary plastering to the disturbed surface of wall and distempering /white washing to match the existing colour shall be included in the unit rate quoted .
Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc all as specified and directed
Supply and installation of Single Phase Static Energy meter of Accuracy Class 1.0, 240V, 50Hz, with Backlit LCD, Optical port & RS 232 port Display of rating 10-60A with DLMS Compliance as per IS 15959 (Measures kWh, kVAh, V,I, PF, frequency, kW, kVA, six months history of Energy & MD in kW & kVA and anti tamper features and load profile) with transparent hinge type box complete all as specified and directed
Supply and fix IP 43 VTPN DB With MCCB Incomer Distribution Board Loadline DBs are fitted with Bus Bars, Neutral Links, Blanking Plates 04 way, 415 volts, 50 Hz, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting with one MCCB as incommer UPTO 160 Amps complete all as specified and directed Note : MCCB SP/TP shall be measured and paid separately under respective item of BOQ
Supply and fix MCCB four pole 100 amps FP 415 Volts breaking capacity 20 KA as per IEC 60947-2 complete all as specified and directed
Supply and fix MCCB four pole 63 amps FP 415 Volts breaking capacity 20 KA as per IEC 60947-2 complete all as specified and directed
Gayatri Associates
JAI HANUMAN CONTRACTOR
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .