REPAIRS AND RE-CANNING OF CHAIRS AND OTHER STEEL FURNITURE INCLUDING PAINTING AT OTM AND MD ACCN IN OUTRAM LINE,LANCER LINE AND HARNI AREA UNDER GE (A) VADODARA.

Amount

Almirah Large Steel (FD-67(M), FD-1031, FD-1033 M & L for Dismantling / Removing the following existing UNSV parts / components as specified and S&F new components, using 1mm thick MS Sheet duly enamel grey painted to match with existing with size & shape all as per drg and stacking of furniture inside the godown after repairs etc. complete as under:-

Shelves

Locking device three way made out of 10mm MS bar round and 3mm MS plate.

Handle with bush

Cleats made out of 2mm thick sheet bent to shape

Two coat of synthetic enamal paint enamel Gray to internal / external surface & shelves completely through spray gun machine after preparation of old painted surface by filling with putty, cleaning with sand paper and applying primer where required to Almirah Large Steel.

Almirah Med Steel FD-1032 : M & L for Dismantling / Removing the following existing UNSV parts / components as specified and S&F new components, using 1mm thick MS Sheet duly painted to match with existing with size & shape all as per drg and stacking of furniture inside the godown after repairs etc. complete as under:-

Shelves

Locking device three way made out of 10mm MS bar round and 3mm MS plate.

Handle with bush

Two coat of synthetic paint enamel T Gray to internal / external surface & shelves completely through spray gun machine after preparation of old painted surface by filling with putty, cleaning with sand paper and applying primer where required to Almirah Med Steel

Bed Hard steel with Ply Wood Top (FD/ E6/MAP/8®) M & L for Dismantling / Removing the following existing UNSV parts / components of Bed Hard Steel with Ply wood Top as specified and S&F new components of duly painted to match with existing with size & shape all as per drg and stacking of furniture inside the godown after repairs etc. complete as under:-

Head rest

Foot rest

Long Rails

Stiifner

Ply wood of size 1980 x 900 mm 12 mm thick of BWR grade all as specified in drg and directed.

One coat of synthetic enamal paint black after preparation of old painted surfaces by cleaning with sand paper and applying primer where ever required all as specified & directed.

Chair CBA Spl with Hand Board (FD-260 & FD/E6/MAP/05) M & L for Dismantling / Removing the following existing UNSV parts / components of Chair CBA Spl with Hand Board as specified and S&F new components of duly painted to match with existing with size & shape all as per drg and stacking of furniture inside the godown after repairs etc. complete as under:-

One piece Seat and back PVC

Hand board made out of 18mm thick prelaminated particle board teak face with hot pressed PVC beading all around

One coat of synthetic enamal paint black after preparation of old painted surfaces after welding work as required, filling with putty, cleaning with sand paper and applying primer where ever required and all as specified and directed.

Chair CBA Steel with Arms (FD-75(M)) : M & L for Dismantling / Removing the following existing UNSV parts / components of Chair CBA Steel with Arms as specified and S&F new components of duly painted to match with existing with size & shape all as per drg and stacking of furniture inside the godown after repairs etc. complete as under:-

Flat iron 20 x 45 x 3mm of required length welded with seat of chair CBA steel with arms complete.

Factory made Seat made out of 2nd class hard wood teak (Well seasoned) duly black stove polished includng cane work 2mm plastic cane half rounded and 3.5/4mm for perimeter work godrej pattren.

Factory made Back rest made out of 2nd class hard wood teak (Well seasoned) duly black stove polished includng cane work 2mm plastic cane half rounded and 3.5/4mm for perimeter work godrej pattren.

Arm rest made out of 1st class hard wood teak (Well seasoned) duly black stove polished.

One coat of synthetic enamal paint OG after preparation of old painted surfaces by welding work as required, filling with putty, cleaning with sand paper and applying primer where ever required and all as specified and directed.

Chair CB Steel Without Arms {FD-75 (M)} M & L for Dismantling / Removing the following existing UNSV parts / components of Chair CB Steel without Arms as specified and S&F new components of duly painted to match with existing with size & shape all as per drg and stacking of furniture inside the godown after repairs etc. complete as under:-

Flat iron 20 x 45 x 3mm of required length welded with seat of chair CBA steel with arms complete.

Factory made Seat made out of 2nd class hard wood teak (Well seasoned) duly black stove polished includng cane work 2mm plastic cane half rounded and 3.5/4mm for perimeter work godrej pattren.

Factory made Back rest made out of 2nd class hard wood teak (Well seasoned) duly black stove polished includng cane work 2mm plastic cane half rounded and 3.5/4mm for perimeter work godrej pattren.

One coat of synthetic enamal paint OG after preparation of old painted surfaces by welding work as required, filling with putty, cleaning with sand paper and applying primer where ever required and all as specified and directed.

Chair Computer (FD/E6/MAP/01) M & L for Dismantling / Removing the following existing UNSV parts / components of Chair Computer as specified and S&F new components of duly one coat of synthetic enamal paint black painted to match with existing with size & shape all as per drg and stacking of furniture inside the godown after repairs etc. complete as under:-

Side arms (PU Material) fixed to chair Computer.

Factory made Cushion seat made of 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all round.

Factory made Cushion Back made with 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all around.

Base assembly to chair computer.

Hydraulic assembly to chair Computer.

Caster wheel.

Chair Verandah FD 256 : M & L for Dismantling / Removing the following existing UNSV parts / components of Chair Verandah as specified and S&F new components of duly painted to match with existing with size & shape all as per drg and stacking of furniture inside the godown after repairs etc. complete as under:-

Leg frame of size 20mm dia 16 gauge of MS conduit pipe fixed with run welding & duly enamel white paint all the conduct pipe

Plastic cane weaving 2mm wide border 3.5/4mm wide round side border cane of approval qty after applying one coat of synthetic enamel white paint complete. make of cane: Ajay / MPI / Shah / Garware

Hard rubber shoe.

Chair Writing (FD/E6/MAP/12) : M & L for Dismantling / Removing the following existing UNSV parts / components of Chair Writing as specified and S&F new components of duly painted to match with existing with size & shape all as per drg and stacking of furniture inside the godown after repairs etc. complete as under:-

Side Arms (PU Material) fixed to chair writing.

Factory made Cushion seat made with 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all round.

Factory made Cushion Back with 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all around.

Charpoy GI Pipe ply top (FD-220) : M & L for Dismantling / Removing the following existing UNSV parts / components of Charpoy GI Pipe Ply Top as specified and S&F new components of same size & shape all as per drg applying one coat of aluminum paint all the GI components and stacking of furniture inside the godown after repairs etc. complete as under:-

Tightening / refitting of frame by removing plywood top from charpoy GI with all fittings complete.

Plytop of 12mm fit to size including 6mm dia 65mm long bolt round headed, with nut and washer maximum 10 Nos per charpoy.

Stiffener of size 25mm square conduit pipe of 1.6mm thick welded at equal distance of GI charpoy frame and applying two coats of synthetic enamel black paint over a coat of red oxide primer to conduit pipe.

GI elbow (32mm dia) ISI marked three way medium grade.

GI checknut 32mm dia medium grade.

32mm dia medium grade long rail including cutting, threading for GI Charpoy (Note: Long Rails are screwed fully in the angle elbow)

Short rails for GI Charpoys 32mm dia made out of from broken long rails obtained from srl item No. 10.06 above including cutting & threading rails and fixing. (Note: Short Rails are screwed fully in the angle elbow)

Legs for GI Charpoys 32mm dia made out from broken short rails obtained from Srl item No. 10.07 above including cutting, threading and fixing.(Note: Legs are screwed fully in the angle elbow)

Locker bed side steel (FD-1029) : M & L for Dismantling / Removing the following existing UNSV parts / components of Locker bed side steel as specified and S&F new components of same size & shape all as per drg and stacking of furniture inside the godown after repairs etc. complete as under:-

Socket for hanging CP rod 20mm dia

Hasp & staple of 75mm x 40mm x 3mm

Shutter duly painted.

Shelves duly painted.

Legs duly painted.

CP pipe 20mm dia CP steel conduit pipe of 1.6mm thickness as per required reach

One coat of synthetic enamal paint T Grey to all steel surface after preparation of old painted surfaces by welding wk as reqd, filling with putty, cleaning with sand paper and applying primer where ever required to Locker Bed Side Steel all as specified in Drg & directed.

Table Bed Side MAP(FD-E6/MAP/15® : M & L for Dismantling / Removing the following existing UNSV parts / components of Table Bed Side MAP as specified and S&F new components of same size & shape all as per drg and stacking of furniture inside the godown after repairs etc. complete as under:-

Side of table with Particle Board Prelaminated both side 18mm thick exterior grade (ISI Marked) with hot pressed PVC beading.

Top of table made out of particle Board Prelaminated both side 18mm thick exterior grade (ISI Marked) with hot pressed PVC beading.

Upper drawer of Table made out of Particle Board Prelaminated both side 18mm thick exterior grade (ISI) Marked duly fixed with hot pressed PVC beading.

Lower Drawer of Table made out of Particle Board Prelaminated both side 18mm thick duly fixed with hot pressed PVC beadin.

Back side of Table made out of 12mm thick Ply Wood BWR Grade (ISI Marker).

MS Tube frame of Table made out of 18 x 18 mm, 18 Gauge MS Square Pipe duly painted.

Stainless Steel handle for Table Bed Side MAP.

Table Office Officer Steel (FD54(M) & FD-1003) : M & L for Dismantling / Removing the following existing UNSV parts / components of Table Office Officer Steel as specified and S&F new components of same size & shape all as per drg and stacking of furniture inside the godown after repairs etc. complete as under:-

Top made out of particle Board Prelaminated both side 18mm Thick (ISI Marked) with hot pressed PVC beading all around of same colour.

Drawer made out of 1mm thick MS Sheet bent to shape & cut to as per drowing size with one lock with key

Shutter of side unit made out 1 mm thick MS Sheet bend to shape & cut to size.

Lock for existing table office officer steel.

One coat of synthetic enamal paint T Grey to all steel surface after preparation of old painted surfaces by welding wk as reqd, filling with putty, cleaning with sand paper and applying primer where ever required to Table Office Officer Steel all as specified in Drg & directed.

Table office Clerk Steel (FD-84(M) & FD-1004) : M & L for Dismantling / Removing the following existing UNSV parts / components of Table office Clerk Steel as specified and S&F new components of same size & shape all as per drg and stacking of furniture inside the godown after repairs etc. complete as under:-

Top made out of Particle Board Prelaminated 18mm thick (ISI Marked) with hot pressed PVC beading all around the top of same colour.

Drawers made out 1mm thick MS Sheet bend to shape & cut to shape duly painted.

Lock to Table

One coat of synthetic enamal paint T Grey to all steel surface after preparation of old painted surfaces by welding wk as reqd, filling with putty, cleaning with sand paper and applying primer where ever required to Table Office Clerk Steel all as specified in Drg & directed.

Table Dining ORs {FD-165(M)} M & L for Dismantling / Removing the following existing UNSV parts / components of Table Dining ORs as specified and S&F new components of same size & shape all as per drg and stacking of furniture inside the godown after repairs etc. complete as under:-

Top made out of Particle Board Prelaminated 18mm thick (ISI Marked) with hot pressed PVC beading all around the top of same colour.

One coat of synthetic enamal paint black to all steel surface after preparation of old painted surfaces by welding wk as reqd, filling with putty, cleaning with sand paper and applying primer where ever required to Table Dining ORs all as specified in Drg & directed.

Table Computer (FD/E6/MAP/03) : Dismantling/removing the following UNSV components and S&F new components/parts as specified complete.

Top made out of 18mm thick prelaminated particle board exterior grade (ISI marked) one side teak face & other side white with hot pressed PVC beading

Key board tray (450 x 480 mm) fitted with telescopic channel

Pull out drawer fitted with telescopic channel

Side Purline

Bottom/middle shelf

Chair Executive Revolving High Back (TP) M & L for Dismantling / Removing the following existing UNSV parts / components of Chair Executive revolving high back as specified and S&F new components of duly one coat of synthetic enamal paint black painted to match with existing with size & shape all as per drg and stacking of furniture inside the godown after repairs etc. complete as under:-

Back Souport spring with locking device

Spilting tilting mechanism

Seat base with welding MS Flat

Seat and back mold high back 5'' thick with cloth orange/red colour

Back mold 3'' thick with 10 mm nut and bolt

Handle with cup holder

Shifting of misc furniture items from Shed No 01,02,03 and open sheds to shed No 04,05,10,11,12 & 13 of furniture yard BSO Makarpura. The work shall be carried out strictly as directed by Engr -in charge by deploying sufficient labour and machinery / vehicles required .The furnitures shall be handled carefully and shall not make any damages during handling. Damages if any during handling as observed by Engr - in charge shall be made good at contractors cost.The work shall be carried out continuously on all working days since it started till completion without break or absence on working days. The contractor shall provide all safety equipments and tools such as hand gloves, gum boot, helmates etc at his own cost. No extra claim shall be entertained on this account, In addition, the contractor shall provide insurance cover to the labour employed by him and department will not be responsible for any damage/loss to the employed person. Stores shed shall be made neat and clean properly after completion of the above work to the entire satisfaction of Engr-in-Charge. Items to be shifted are as under :- (i)Charpoy 32 mm GI Pipe Ply Top =550 Nos (ii)Almirah Large Steel with Shelves =140 Nos (iii)Almirah Med Steel with Shelves =110 Nos,(iv)Bed Hard Wood Ply Top =120 Nos (v)Bed Hard Steel MAP =110 Nos,(vi)Table Dining 6 Pers =45 Nos (vii)Table Dining 4 Pers =55 Nos,(viii)Chair Varandah =850 Nos (ix)Chair Dining CB =350 Nos,(x)Table Bed Side MAP =130 Nos (xi)Side Board =35 Nos,(xii)Book Case Steel Glazed =20 Nos (xiii)Book Case Small =40 Nos,(xiv)Table Computer=50 Nos (xv)Chair Computer =150 Nos,(xvi)Chair CB Steel with Arms =350 Nos (xvii)Chair CB Steel w/o Arms =450 Nos,(xviii)Table 3’ x 2’ w/o Drawer =80 Nos (xix)Locker Bed Side Steel =110 Nos,(xx)Chair Easy =250 Nos (xxi)Chair Dining Officers =120 Nos,(xxii)Bin Soil Multipurpose=40 Nos (xxiii)Table Office Officer Steel =45 Nos ,(xxiv)Table Office Clerk Steel =60 Nos

M/S Badri Electicals

shreekalyanwoodworks