Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹41.6 LAccepted-AOC HIMACHAL PRADESH | SHIMLA | HIMACHAL PRADESH | 171002 | L-1 | Accepted-AOC being lowest | |
| 2 | L-2₹46.8 L+₹5.2 L (12.6%)Rejected-AOC | L-2 | Rejected-AOC not found lowest | |
| 3 | Rejected-Technical 00 AGRA AGRA UTTAR PRADESH 282001 | AGRA | UTTAR PRADESH | 282001 | - | Rejected-Technical being non responsive |
Tender Value
₹29.9 L
EMD Value
₹52,500
Closing Date
17 Jun 2020, 6:00 pmClosed
Executive Engineer
Sunder Nagar Division HPPWD Sundernagar.
SH Providing and fixing anodized aluminum work for doors, windows etc.).
2020_PWD_37806_1
PW-SNR-CB-E-Tender/19-521-35 dt.13.5.20
Open Tender
Civil Works - Buildings
Item Rate
90 days
In Sundernagar Division
As per bid document
12 documents required · 12 mandatory
₹1,500
EE Sundernagar
₹52,500
25 Jul 2020
4 Jun 2020
18 Jun 2020
4 Jun 2020
17 Jun 2020
4 Jun 2020
Amount
Providing and fixing anodised aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, traight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/panelling C.P. brass/stainless steel screws. For doors windows and ventilatiors and glazed partitions frames. complete as per architectural drawings and technical specification including all leads , lifts of material and as per the directions of Engineer-In-Charge.
Providing and fixing anodised aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top,bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth,rustfree, straight, mitred and jointed mechanically where ever required including cleast angle,aluminium, snap beading for lazinge/panelling C.P. brass/stainless steel screws. Ventilators including providing and fixing hinges/pivots and making provisions for fixing of fittings where ever required including the cost of PVC/neoprene gaskets as required all accessaries complete as per architectural drawings and technical specification including all leads , lifts of material and as per the directions of Engineer-In-Charge.
Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etc with PVC/neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer-In-charge (cost of aluminium snap beading shall be paid in basic item.) Glazing with glass panes of 5.50mm( five poin fifty millimetre ) thickness ( the weightof aluminium door windows not less than 13.75 kg/ sqm.(thirteen point seventy five kilogram ) complete as per architectural drawings and technical specification including all leads , lifts of material and as per the directions of Engineer-In-Charge.
Providing and fixing Prelaminated board bwp phenol bonded exterior/interion grade both sides. 12mm ( twelve millimetre ) thick complete as per architectural drawings and technical specification including all leads , lifts of material and as per the directions of Engineer-In-Charge.
Jeet Ram
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .