PROVISION OF TECHNICAL COMPLEX AT INS SARDAR PATEL UNDER GE (NAVY) PORBANDAR

Amount

SCHEDULE "A" Part - I (BUILDINGS & STRUCTURES WORKS) Total of Sch-'A' Part-I B/F

SCHEDULE "A" PART-II (SITE CLEARANCE, EXCAVATION & EARTHWORK) Total of Sch-'A' Part-II B/F

SCHEDULE "A" PART-III (INTERNAL WATER SUPPLY) Total of Sch-'A' Part-III B/F

SCHEDULE "A" PART-IV (INTERNAL ELECTRIFICATION & TELEPHONE CONDUITS & LAN SOCKETS) Total of Sch-'A' Part-IV B/F

SCHEDULE "A" PART-V (ROADS, HARDSTANDING & CULVERTS) Total of Sch-'A' Part-V B/F

SCHEDULE "A" PART-VI (AREA DRAINAGE) Total of Sch-'A' Part-VI B/F

SCHEDULE "A" PART-VII (SEWAGE DISPOSAL) Total of Sch-'A' Part-VII B/F

SCHEDULE "A" PART-VIII (EXTERNAL ELECTRIFICATION & DG SET) Total of Sch-'A' Part-VIII B/F

SCHEDULE "A" PART-IX (EXTERNAL WATER SUPPLY) Total of Sch-'A' Part-IX B/F

SCHEDULE "A" PART-X (FIRE FIGHTING) Total of Sch-'A' Part-X B/F

SCHEDULE "A" PART-XI (LIGHTNING PROTECTION) Total of Sch-'A' Part-XI B/F

SCHEDULE "A" PART-XII (REFRIGERATION, AIR CONDITIONING & AIR COMPRESSOR) Total of Sch-'A' Part-XII B/F

SCHEDULE "A" PART -XIII (MISCELLANEOUS ITEMS)

INTERNAL ELECTRIFICATION, TELEPHONE CONDUITS & LAN SOCKETS

S & F modular type 3 pin 25 A socket, conforming to IS 1293: 2005 complete all as specified in IS 732: 2019 and directed by the engineer-in-charge. Make: L & T Cat-Part No. OC31W35, Havells Cat-Part No. AHOKCXW251 or equivalent model of Anchor

S & F MCB for AC applications conforming to IS/IEC 60898-1-2002, having breaking capacity Icn = 10 kA, sliding bottom clamp, colour coded on/off indication on dolly, bi-connect IP 20 protected lower terminals and sliding shutters, etc. complete all as specified in IS 732: 2019 and directed by the engineer-in-charge. Make: Schneider, Legrand, L & T a) 6- 32 A, 230 V, 50 Hz, SP MCB ('C' curve)

b) 6- 32 A, 415 V, 50 Hz, TP MCB ('C' curve)

c) 6- 32 A, 415 V, 50 Hz, FP MCB ('C' curve)

e) 40- 63 A, 415 V, 50 Hz, FP MCB ('C curve)

S & F 20 W surface / wall mounted LED batten capable of delivering 2000 lumen, having PC diffuser, luminous efficiency of > 90 lumen/W, CRI > 80, PF > 0.9, CCT 6500K, independent isolated SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS 15885 (Part-2/Sec-13): 2012, polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing. white coloured ABS end caps, IP 20 protection, input voltage range 140- 270 V, input frequency 50- 60 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed by the engineer-in-charge. Make: Philips Cat-Part No. BN 021C LED20S PSU CDL/NW GR or equivalent model of Havells or Wipro

S & F 10 W surface / wall mounted LED batten capable of delivering 1150 lumen, having PC diffuser, luminous efficiency of > 110 lumen/W, CRI > 80, PF > 0.9, CCT 6500K, independent isolated SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS 15885 (Part-2/Sec-13): 2012, polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing. white coloured ABS end caps, IP 20 protection, input voltage range 140- 270 V, input frequency 50- 60 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed by the engineer-in-charge. Make: Philips Cat-Part No.BN 021 LED10S- 6500 PSU GR S1 or equivalent model of Havells or Wipro

S & F 80 W High bay light duranto mounted LED, LED capable of delivering 10000 lumen, extruded aluminium housing with PC diffuser and integrated electronic driver with high efficiency long life LED chips, CRI ≥ 80, power factor ≥ 0.95, system luminous efficiency > 100, having average life 50000 hrs, operating voltage 140- 270, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the LED fitting including hanging arrangements from ceiling with SS chain 2 meter height complete all as specified and directed. Make: Philips Cat-Part No.BY325P LED100S CW PSU GR FG NB XTFCL V1 or equivalent model of Bajaj Cat-Part No. 169958 BGHBM XE 80W LED or Wipro Cat-Part No. LH14-102-XXX-57-XX

S & F 25 W street light having high efficiency long life LED module with SMD LED package mounted on MCPCB with high LED efficacy of ≥ 2600 lumen/W, integral SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS: 15885 (Part-2/Sec-13): 2012, IP 66 protection, high effiency polycarbonate cover with integrated lens housed in pressure die-cast aluminium alloy heat sink for effective thermal management, sturdiness, excellent corrosion resistance, separate optical and control gear compartment & top opening for easy maintenance, suitable for side entry, pole mounting with bracket arm OD 35 mm to 42 mm including necessary electrical connection to the fixture with 3 core flexible Cu conductor cable of appropriate size and 1.5 m long bracket, having 40 mm diameter light grade GI pipe, including GI clamps, nuts, bolts & washers with two coats of synthetic enemal paint over a coat of red oxide primer complete in all respect as specified and directed by engineer-in-charge. Make: Philips BRP042 LED 26 CW MR S1 PSU GR or equivalent model of Havells Cat-Part No. ENDURAPEARLSL25W LED757 SASYTOPCMP or Wipro Cat-Part No. LR02-291-XXX-57-XX

S & F air circulator fan having blade sweep 600 mm, air delivery not less than 16000 m³/hr, speed 1400 RPM, operating voltage 220-240 V and frequency 50 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size complete all as specified and directed by engineer-in-charge. Make: Crompton Cat-Part No. AC600WALL-1 or equivalent model of Havells or BAJAJ

S & F 2.0 mm thick 50 mm X 100 mm perforated hot dipped galvanized iron cable tray having galvanization thickness not less than 50 microns and perforation not more than 17.5% including fittings viz. joints, bends, tees, etc. in convenient sections of length.

M & L for earthing complete with GI earth plate electrode of 60 cm x 60 cm x 6 mm size, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to GI wire of diameter 4.0 mm as earth lead, by means of bolts, buts, check nuts and washers of galvanised iron or steel, galvanized iron pipe of 15 mm diameter, connected to earthing test point, all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated including testing on completion and including excavation, earthwork, PCC earth pit of dimensions 550 mm X 550 mm (outer) and 300 mm X 300 mm (inner) and 250 mm deep, with a 10 mm thick CI cover, hinged to CI frame on ground level, GI watering pipe, funnel, etc. complete all as specified and directed by the engineer-in-charge. NOTE:- Earth continuity conducter beyond 7.5m shall be measured and paid separately under resepctive item of this Schedule.

M & L of structural steel for cable tray support structure with two coats synthetic enamel paint over one coat of zinc chromate primer.

M & L Telephone jack RJ 11 with shutter along with pressed steel sunken box with 3 mm thick PVC top cover complete all as specified and directed.

M & L LAN RJ45 Mounting with jakc(CAT6) socket along with pressed steel sunken box with 3 mm thick PVC top cover complete all as specified and directed.

S & F 10 pair telephone distribution box with suitable S.S. frame for mounting tag module, Krone module and incorporated in 16 SWG MS box with proper lockable cover. The box should be fixed on wall with suitable fasteners including painting & earthing. This also includes fixing the cable, distribution chart sufficient space for the cables, wires etc [Make: DELTA or equivalent]

EXTERNAL ELECTRIFICATION

Supply, Installation, Testing and commissioning factory made, CPRI type tested, indoor cubical compartmental type LT panlel of suitable size, conforming to IEC 61439-1 & 2 and IEC 61641, having both sides openable with hinged double doors and locking arrangement, IP 43 protection made out of 2.0 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of suitable size, including earthing stud, labelling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel vitreous enamelled (white) with letters, figures and conventional skull and bones in signal red colour suitable for 3- Phase, 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length and size, including fixing lugs, bolts, screws, etc. complete all as specified and directed. Make: L & T, Schneider, Siemens, ABB The LT panel shall comprise of the following::- [A] BUSBAR CHAMBER [i] 01 Set (3L + N) of copper busbar of rated capacity 320 A, covered with PVC insulated sleeves including insulator, nuts, bolts, etc. with complete connection

[B] INCOMING [i] 200 A, 415 V, Ics = 100% Icu = 36 kA, 50 Hz FP MCCB, conforming to IEC 60947-2, having microprocessor based trip unit, adjustable overload setting (0.7 - 1 X In), adjustable short-circuit setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (Ready, Overload and pre-alarm & Overload), etc.- 01 Nos. [ii] Cl 1.0 multi-function meter capable of measuring V, A, F, PF, W/VA, Wh/VAh, Runhrs. Onhrs & interupts- 01 Nos. [iii] LED phase indicators (Red, Yellow, Blue)- 01 Set [C] OUTGOING [i] 100 A, 415 V, Ics = 100% Icu = 36 kA, 50 Hz FP MCCB, conforming to IEC 60947-2, having microprocessor based trip unit, adjustable overload setting (0.7 - 1 X In), adjustable short-circuit setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (Ready, Overload and pre-alarm & Overload), etc.- 01 Nos. (for Industrial Sockets Panel) [ii] 63 A, 10 kA, 415 V, 50 Hz FP MCB (c -curve)- 02 Nos. (for Building DB & Spare) [iii] 32 A, 10 kA, 415 V, 50 Hz FP MCB (c -curve)- 06 Nos. (for Highbay DB, Electric door DB, Crane &Submersible Pump) [iv] Dol Starter – 2 Nos. [v] LED phase indicators (Red, Yellow, Blue)- 08 Set

[vi] Digital ammeter of suitable capacity with suitable CTs for each feeder- 01 Nos. NOTES: [i] The Panel shall be procured from the original equipment manufacturer (OEM) or OEM authorized franchises only. [ii] The busbars shall be of double deck arrangement for ratings ≥ 2000 A. [iii] The busbars shall supported on regular intervals using SMC or DMC insulators as per the tested design. [iv] The Panel / Switchboard shall be tested to withstand vibration caused by an earthquake in accordance with IEC 60068-3-3:2013 or IS 1893 Zone V. [v] All noble components (viz., hinges, support, frame- horizontal & vertical) of the Panel shall be given by the OEM.

Supply, installation, testing and commissioning of ATS Panel of suitable size, conforming to IEC 61439-1&2 and IEC 61641 having both sides openable with hinged double doors and locking arrangement, IP 54 protection and made out of 3.15 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of suitable size, including earthing stud, labelling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel vitreous enamelled (white) with letters, figures and conventional skull and bones in signal red colour suitable for 3- Phase, 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length and size, including fixing lugs, bolts, screws, etc. complete all as specified and directed. Make: ABB, L&T, Schneider, Siemens The ATS Panel shall comprise of the following: [i] 200 A, 415 V, Ics = 100% Icu = 36 kA, 50 Hz FP MCCB, conforming to IEC 60947-2, having microprocessor based trip unit, adjustable overload setting (0.7 - 1 X In), adjustable short-circuit setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (Ready, Overload and pre-alarm & Overload), etc.- 02 Nos. [for main & emergency incomers]

Supply, installation, testing and commissioning of factory made, CPRI type tested, indoor cubical compartmental type LT PANEL-2 (Industrial Sockets Panel) of suitable size, conforming to IEC 61439-1 & 2 and IEC 61641, having both sides openable with hinged double doors and locking arrangement, IP 43 protection made out of 2.0 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of suitable size, including earthing stud, labelling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel vitreous enamelled (white) with letters, figures and conventional skull and bones in signal red colour suitable for 3- Phase, 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length and size, including fixing lugs, bolts, screws, etc. complete all as specified and directed. Make: L & T, Schneider, Siemens, ABB The LT PANEL-2 shall comprise of the following: [A] BUSBAR CHAMBER [i] 01 Set (3L + N) of copper busbar of rated capacity 160 A, covered with PVC insulated sleeves including insulator, nuts, bolts, etc. with complete connection

[B] INCOMING [i] 100 A, 415 V, Ics = 100% Icu = 36 kA, 50 Hz FP MCCB, conforming to IEC 60947-2, having microprocessor based trip unit, adjustable overload setting (0.7 - 1 X In), adjustable short-circuit setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (Ready, Overload and pre-alarm & Overload), etc.- 01 Nos. [ii] Cl 1.0 multi-function meter capable of measuring V, A, F, PF, W/VA, Wh/VAh, Runhrs. Onhrs & interupts- 01 Nos. [iii] LED phase indicators (Red, Yellow, Blue)- 01 Set [C] OUTGOING [i] 32 A, 10 kA, 415 V, 50 Hz FP MCB (c -curve)- 05 Nos. (for Industrial Sockets & Spare) [ii] LED phase indicators (Red, Yellow, Blue)- 05 Set [iii] Digital ammeter of suitable capacity with suitable CTs for each feeder- 01 Nos.

NOTES: [i] The Panel shall be procured from the original equipment manufacturer (OEM) or OEM authorized franchises only. [ii] The busbars shall be of double deck arrangement for ratings ≥ 2000 A. [iii] The busbars shall supported on regular intervals using SMC or DMC insulators as per the tested design. [iv] The Panel / Switchboard shall be tested to withstand vibration caused by an earthquake in accordance with IEC 60068-3-3:2013 or IS 1893 Zone V. [v] All noble components (viz., hinges, support, frame- horizontal & vertical) of the Panel shall be given by the OEM.

Supply and fix LT cable route indicator including 1.5 feet GI strip and PCC base all as per standard specification

M & L for earthing with mild steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25m deep below normal ground level) connected to galvanised iron earth lead strip 32 x 6 mm by means of galvanised iron nuts, bolts and washer, earth lead connected to eqpt as directed, earth plate surrounded with adequate quantity of charcoal dust mixed with common salt to a packed thickness of 15 cm all around the plate including necessary earth work, PCC chamber and reinforced PCC cover made by PCC 1:3:6 type C-1 as in pit chamber and RCC pit cover 50 mm thick precast RCC 1:2:4 type B-1 duly reinforced with 6mm dia MS bar at 150mm c/c both ways with 10 mm dia MS round bar as handle, 20 mm bore GI pipe medium grade for watering and 40 mm dia GI pipe light grade for protection of earth lead up to 3 mtr with funnel, wire mesh etc with and including testing complete all as specified and as shown in electrical plate No 3 of MES sch Part I. EE - 06, LP - 06 & DG Set - 04 NOTE:- Earth continuity conducter beyond 7.5m shall be measured and paid separately under resepctive item of this Schedule.

EXTERNAL WATER SUPPLY

S & F of 2 HP single phase HORIZONTAL OPENWELL SUBMERSIBLE PUMP, pipe size 40 x 3 mm, Head Range- 9-28 metre, Discharge Range 310-60 LPM, Model- OWK22(1PH)G-28 along with sutaible size starter, including connection of discharge side outlet to discharge pipe using reducer, clamping, coupler etc., complete all as specified and directed. Make-Crompton / Kirloskar / Havells

S & F of 2.5 sq. mm Flat Three Core PVC Insulated & PVC Sheathed Industrial Cable for Submersible Pump Motors 1100 Volt, conforming to IS 694, complete all as specified and directed. Make- Havells

M & L porbandar stone masonary valve chamber of size 0.90 m x 0.90 m X 0.75 m (internal size) and cover including earth work complete all as specified and comprising of the following. (a) 150 mm thick PCC 1:4:8 type D2 using 40 mm graded stone aggregate for foundation (b) Porbandar stone masonry 230 mm thick built in CM 1:4 (c) 15 mm thick rendering in CM(1:4) internally and externally to exposed surface of thick work including 150 mm below ground level (d) 100 mm thick coping in PCC 1:2:4 type B1 using 20 mm graded stone aggregate (e) MS covers made out of 50 mm thick MS plate with double hinges, fixed MS angle iron frame made out of MS angle iron 40 x 40 x5 mm thick including 150 mm long hold fast made out of MS flat iron of size 25 x 4 mm embedded in PCC coping MS covers shall be provided with suitable hand grip and suitable locking arrangement, (f) All MS surface shall ,be painted with two coats of synthetic enamel paints over a coat of red oxide primer complete all as specified and directed..

M & L for tapping to CI pipe line of 150 mm dia and making connection through 50 mm GI pipe line including required tapping ring and clamps, fittings, rubber gaskets, tapping arragnge ment etc, complete all as specified and directed..

FIRE FIGHTING

Supply and fixing star-delta starter suitable for 10 HP to 12.5 HP motor type MK-1 complete with sheet-steel enclosure, complete all as directed by the Engineer-in-Charge Make : L & T or equivalent.

Supply, laying and testing ISI Marked 2 core x 1.5 Sqmm, Multistrand Copper, FRLS PVC insulated unsheathed unarmourmed cable of 1100V grade.

Supply and fix fire extingusher AFFF type 9 kg capacity Including all fixing accessories, complete all as specified and directed.

Supply and fix fire extingusher ABC TYPE 6 kg capacity, including all fixing accessories, complete all as specified and directed.

Supply and fix fire extingusher CO2 type, 4.5 kg capacity including all fixing accessories

Supply and fix branch pipe with nozzle of 20 mm dia for hose reel conforming to IS 8090

REFRIGERATION, AIR CONDITIONING & AIR COMPRESSOR

Supply, installation & commissioning of 25 Ltr / Hr with 30 Ltr. S.S. Pressure Tank 5 stage single reverse osmosis water purification system with M.S. powder coated frame, prefilter housing with 'O' ring presediment filter GAC filter, carbon filter suitable buster DC pump capacity 80 psi, mention with 40 psi inline type post carbon filter auto low & high pressure switches with following size of storage tank & LPH capacity & erected as directed with one year comprehensive maintenance guarantee complete all as specified and as directed. Make : Kent, Havells, Aqua Guard

Voltage stabiliser of capacity 5.0 KVA for automatic operation, single phase naturally air cooled indoor type and designed for input variation between 160V to 250 V with output voltage stabilised at 220V AC with efficiency of 98% complete all as specied and directed. Make: V-Guard

Supply, install, commisioning and testing of LP reciprocating air compressor with two stage heavy duty ,two cylinder ,,three phase 415 volts,50 Hz motor with max working pressure 175 Psi all as specified and directed by Engineer-in-charge with following undermentioned technical specifications. (i) Model - KC-742 (5 HP) Make- Karan or equivalent (ii) Type of compressor - Two stage Heavy duty (iii) No of cylinders-Two cylinders (iv) Piston displacement (CFM) -17.3 CFM (v) Max working pressure -175 Psi (vi) Motor -5 HP,1440 RPM,3 Phase (vii) Starter-Dual starter (viii) Air receiver capacity -200 Ltrs (ix) Tank size W x L 68"x60" (xi) FAD = 13.83 CFM NOTE:- The cost of mild steel stand made of angle iron and PCC base of size as directed shall deemed to be included in the quoted rate.

Supply & fixing of brass pressure gauge suitable for 15mm bore PVC hose pipe nylon braded complete all necessary items, complete all as specified and directed.

Supply & fixing of brass sneeze nozzle suitable for 15mm bore PVC hose pipe nylon braded complete all necessary items, complete all as specified and directed.

Supply & fixing of 15mm bore heavy duty 3 layered PVC hose pipe nylon braded complete all necessary items, complete all as specified and directed.

ROLLING SHUTTER ELECTRICAL MOTOR

Supply, Installation, testing and commissioning of Automatic heavy duty 3 phase motor suitable for Approx 7metre X 10 metre size Rolling shutter operation with maximum total weight 2000 kg, complete all as specified and directed, with undermentioned specifications:- Suitable size electric motor with gear mechanism for motorized shutter for shutter size Upto 23’.9”x24’.9” Electric Motor with capacity 2000 Kg – 3ph. Open close mechanism Overheat protection Manual operation option Body material stainless steel / cast iron with DOL starter of suibale capacity Motor make (Jielong, SAR,Maxwell) Note :- The cost of following items and labours are deemed to be included in the quoted rates of the item (i) All eletrical wiring of suitable size & required qty as per site conditions. (ii) All switching arrangements ie:ON/OFF arrangement, Limit switches. (iii) All fixing arrangements & fabrication for motor.

Supply, Installation, testing and commissioning of Automatic heavy duty 3 phase motor suitable for Approx 8X 8 mtr size Rolling shutter operation with maximum total weight 2000 kg, complete all as specified and directed, with undermentioned specifications: Suitable size electric motor with gear mechanism for motorized shutter for shutter size 27’.0”x 24’.9”. Electric Motor with capacity 2000 Kg – 3ph. Open close mechanism Overheat protection Manual operation option Body material stainless steel / cast iron with DOL starter of suibale capacity Motor make (Jielong,SAR,maxwell) Note :- The cost of following items and labours are deemed to be included in the quoted rates of the item (i) All eletrical wiring of suitable size & required qty as per site conditions. (ii) All switching arrangements ie:ON/OFF arrangement, Limit switches. (iii) All fixing arrangements & fabrication for motor.

CRANE

Design, supply, install, testing and commissioning of indoor type EOT (electrically operated travelling) double girder over head crane of 2 Ton capacity, class II, M5 Non flameproof as per IS:3177 of 2020 and IS : 807 of 2006 and other relevant Indian standards of latest versions having straight travel path, operating on 415 volts, 3 phase, 50Hz, AC and with control voltage not exceeding 110 volts, AC through low voltage transformer with independent movable pendent supported by chain/SS rope having lift of hook 7 metre above floor level, span not exceeding 10m and rails (long travel length as per drawings 35m), double girder type, floor operated movable pendent control by means of push buttons independent of crab trolly position with protective panel with down shop lead, trailing cable complete with all accessories/equipments duly epoxy painted complete all as per details given in Appendix 'A' and as per OEM specifications where details not specifically mentioned in Schedule 'A' / Annexure 'A', all as shown on drawings and as specified and directed. The span length, cross travel length & hook height mentioned is tentetive exact span length, cross travel length & hook height shall be measured at site before fabrication.

EOT crane shall be provided with the following specifications and capable for electrically controlled movements: (i) Capacity of Crane : 2 Ton double box girder (ii) Clear span : 10 m approx (iii) Bay length : 35m approx (iv) Hook height : 7 m approx

(v) Hoisting speed : 3.0 mpm and 1.0 mpm micro speed (vi) CT speed : 7.0 mpm and 2.0 mpm micro speed (vii) LT speed : 10.0 mpm with 2.0 mpm micro speed (viii) Control; Pendent control,

NOTE: 1 (a) Unit rate quoted shall be deemed to include provision of electrical wiring of suitable size in rigid metallic conduits fixed on surfaces from main switch upto electrical control panels and provision of ISMC channel welded along with ISMB (gantry girder) and longitudinal travelling rail welded alongwith ISMC.inclusive all supports ,MS insulators & other fittings & fixture as reqd. (b) Clear span and bay length specified and shown on drawing are only indicative. The tenderer shall visit the site and ascertain exact span and bay length before designing / execution. (c) Grantry girder will be provided by Building Contractor

(d) Dimensions,capacities/sizes of equipments/ accessories mentoned on drawing are minimum to be provided. Prior approval of accepting officer Engineer shall be obtained for the detailed construction drg and electrical wiring diagram of EOT crane and contractor shall incorporate only components wherever required and the rates quoted above shall deemed to inclusive of such provisions and its accessories before designing / execution. (e) Longitudinal / cross travel shall be limited to 1.0 m away from the wall on both ends.

(f) The contractor shall prepare Constructional drawing including specification as per the design of approved OEM ,In case the lowest bidder is not OEM himself then lowest bidder shall submit Constructional drawing including specification for Approval of Accepting Officer . (g) Any technical clarifications regarding size, capacity, rating and specification and drawings may please be clarified by the bidder from the E-4 section of this office before the Bid is submitted, he should also visit the site where the crane are being installed before submitting the Bid. NOTE: 2- BLANK

Note-3 The cranes shall be tested stage wise for 25%,50%, 75% 100% and 25% overload , The rates for all manpower and material and testing arrangement required will be deemed to be included in quoted rates and nothing extra will be admissible on this account. Note 4-Guards will be provided all along length with approch ladder on both sides of crane with hand rail on both sides of ladder at a suitable level and ladders should have landing paltforms at every 4 to 5 mtrs or less.

Earthing complete with galvanized steel earth plate electrode 600mm x600 mm x 6mm buried directly in ground vertically to a depth not less then 2.25 meter below normal ground level with top edge of the plate not less then 1.50 meter below normal ground level connected to galvanized earth strip 32x 6mm by means of bolts ,nuts ,check nuts and washers complete up to and including test point made out of 40 x 6mm alum flat including earthing pit , charcoal common salt ,earth strip 32x 6mm up to 7.5m, 20mm dia medium grade GI watering pipe, G.I. protection pipe 40 mm dia up to 7.5m long,,PPC pit in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate ,PCC pit cover including earth work complete all as shown in electrical plate No-5 of SSR-2009 (part-I) NOTE:- Earth continuity conducter beyond 7.5m shall be measured and paid separately under resepctive item of this Schedule.

DG SET

Supply, installation, testing and commissioning of silent DG Set, conforming to IS: 10002- 1981, complete with Diesel Engine of suitable BHP & AC Brushless SPDP alternator, conforming to IS: 13364- 1992, mounted on a common base frame & coupled through a flexible coupling or close coupled complete with platform, control panel having meters, sound-proof canopy, etc. of capacity 100 kVA complete all as specified and directed. Make: Kirloskar, Crompton Greves, Cummins [a] Engine: multy cylinder, in-line, 4 stroke, radiator cooled engine, well designed air handling system with dry type, heavy duty, replaceable paper element air cleaner with restriction indicator, air to air aftercooling, optimised turbocharger for increased altitude,Inline fuel pump with A1 class mechanical governing, spin on fuel filter, standard integral set-mounted radiator system, designed and tested for 50°C ambient temperature, full flow spin on lube oil filter, electrical starter motor with soft start engagement feature, ƒƒbattery charging alternator with 1 x 12 V 88 AH DC battery or as per DG OEM recommendation.

[b] Alternator: ƒƒBrushless type, screen protected, revolving field, self-excited alternator, conforming to IS/IEC 60034-1 3-phase reconnectable winding with 12 terminals brought out for connection, dedicated winding specially designed for single operation, impregnation on all wound components for better mechanical strength [c] Control Panel: Manufactured with 14/16 gauge CRCA sheet and powder coated for weather-proof and long lasting finish. The control panel consists of the following parts: [i] Controller: Aluminum bus bars with suitable capacity with incoming/outgoing terminals [ii] Indicating lamps for ‘Load ON’ and ‘Set Running’ [iii] Instrument fuses duly wired and ferruled [iv] MCCB of suitable rating with overload and short circuit protections [d] Microprocessor based generator set monitoring and control system including an intuitive operator interface that allows for complete generator set control as well as system metering, fault annunciation, configuration and diagnostics, LED backlit LCD display with tactile feel soft-switches & generator set status LED lamps, remote START-STOP [e] Engine Metering: Oil pressure, engine temperature, starting battery voltage, engine running hours

[f] AC Alternator Metering: L-L voltage and L-N voltage, current (phase and total), kVA (phase and total) and frequency [g] ƒEngine Protection: Low lube oil pressure, high/low coolant temperature, battery over/under/weak volts, fail to crank/start, sensor failure, cranking lockout, low fuel level [h] AC Alternator Protection: Over/under voltage, over/under frequency, loss of AC sensing. [i] Data Logging: Engine hours, control hours and upto 5 recent fault codes [j] Configurable glow plug control [k] ƒƒ12 V DC operation [l] Silencer: ƒƒCritical grade silencer suitably optimized to meet stringent noise emission standards laid down by MoEF / CPCB [m] Mounting Arrangement: ƒƒEngine and alternator are mounted on a common MS fabricated base frame with AVM pads. [n] ƒƒBase frame with integral fuel tank is provided with drain plug, air vent, inlet and outlet connection, level indicator and provision for cleaning

SHREE GURUKRUPA CONSTRUCTION CO.

AUM STRUCT BUILD PVT LTD

Vraj and Vaj Construction

Agarwal Jagdish Construction Company Pvt. Ltd.