PROVIDING & LAYING OF 600 MM DIA. SEWERAGE RISING MAIN FROM UMRA SPS TO GOTHAN STP IN NEWLY ADDED AREA OF NEW NORTH DRAINAGE ZONE, SMC

NAME OF WORK: PROVIDING & LAYING OF 600 MM DIA. SEWERAGE RISING MAIN

FROM UMRA SPS TO GOTHAN STP IN NEWLY ADDED AREA OF

NEW NORTH DRAINAGE ZONE, SMC

TENDER NOTICE (online) NO: DMC/ Drainage/06/2026-27, Work No. -

VOLUME-II: PRICE BID

Download of tender documents from : 03/10/2026 to 21/10/2026

website smc.nprocure.com

Last date of submission of online tender : Up to 21/10/2026 up to 18.00 hrs

Last date of submission of tender fees, EMD : From 22/10/2026 to 02/11/2026 To Chief

and other documents in hard copy Accountant, "Shri Tapi Bhawan – Surat Mahanagar

Seva Sadan" Gordhandas Chokhawala Marg, Shri

Tapipura, Surat, by R.P.A.D./Speed Post. up to

Date of Pre-bid conference : Bidders shall have to post their queries on email

address [email protected] on or

before Dt. 12/10/2026

Estimated Cost : Rs. 8,36,00,748.07/-

Earnest Money Deposit (EMD) : Rs. 8,37,000.00/-

EMD shall be paid 50% in the form of crossed

Demand Draft of Nationalized Bank payable at

Surat and remaining 50% shall be in the form of

Bank Guarantee of Nationalized Bank (encashable

at Surat) or 100% EMD amount shall be in form of

crossed Demand Draft of Nationalized Bank

payable at Surat.

Document Fees : Rs. 14,160.00 (Incl. CGST 9% and SGST 9%)

Opening of Tender (Online) : 22/10/2026 10:30 Hrs. onwards

Tender fees, EMD, Affidavit, Under taking& Addenda and Corrigendum (if any)

in hard copy to be submitted to:

To Chief Accountant,

"Shri Tapi Bhawan - Surat Mahanagar Seva Sadan"

Gordhandas Chokhawala Marg,

Shri Tapipura, Surat –

1. NAME OF WORK

PROVIDING & LAYING OF 600 MM DIA. SEWERAGE RISING MAIN FROM UMRA

SPS TO GOTHAN STP IN NEWLY ADDED AREA OF NEW NORTH DRAINAGE

1) ESTIMATED COST OF CAPITAL WORK: Rs. 8,36,00,748.07(Excluding

(Eight crore Thirty-Six lakh Seven Hundred Forty-Eight Rupees and Seven paisa

TENDERER’S BID FOR EXECUTION OF CAPITAL WORK:

PERCENTAGE HIGHER / BELOW OF Rs. 8,36,00,748.07(Excluding GST)

TENDER AMOUNT (IN FIGURES): Rs. __________________

TENDER AMOUNT (in WORDS): Rs. __________________

Rate Quoted by bidder shall be inclusive of all taxes but Excluding GST. GST shall

be paid extra as per prevailing rules.

SIGNATURE AND SEAL OF THE CONTRACTOR:

NAME AND ADDRESS:

SIGNATURE OF WITNESS:

NAME AND ADDRESS:

DESCRIPTION Quantity Rate Per Amount

PART-A Providing and Supplying

Providing and supplying D. I. K-9

grade pipes for following nominal

bore diameter with internal cement

mortar lining including all taxes,

1 insurance, transportation, freight

charges, octroi, inspection charges,

loading, unloading, conveyance to

departmental stores, stacking etc.

complete. (IS 8329-2000).

Providing and supplying of ISI mark

CI D/F Sluice Valves as per

IS:14846 (Latest Edition) of

following class and diameter

including all taxes, insurance,

transportation, freight charges,

octroi, inspection charges, loading,

2 unloading, conveyance to

departmental stores, stacking etc.

(1) 600 mm dia PN-1 With gear

operated (Alt-1 type Long body)

(2) 150 mm dia PN-1 With hand

wheel / cap operated (PD type 7.00 5,848.00 No

Providing and supplying of C. I. Air

valves of approved make & quality

of following class and diameter

including all taxes, insurance,

transportation, freight charges,

3 octroi, inspection charges, loading,

unloading, conveyance to

departmental stores, stacking etc.

Kinetic Air Valve (DK)

Providing and supplying of ISI mark

CI D/F Sluice Valves as per

IS:14846 (Latest Edition) of

following class and diameter

including all taxes, insurance,

transportation, freight charges,

octroi, inspection charges, loading,

unloading, conveyance to

departmental stores, stacking etc.

DESCRIPTION Quantity Rate Per Amount

PN-1 With hand wheel / cap

operated (PD type short body)

Manufacture, Supply & Delivery of

Ductile Iron Flange socket spigot

bends, tees, reducers or any other

specials as per BS-EN-545/1995

Class-A series K12 suitable for use

with D.I. Pipes manufactured as per

IS:8329/1994delivery of specials is

to be made to GWSSB store or site

5 of works any where in Gujarat 17745.00 151.00 Kg

including all taxes, loading,

unloading, carting, stacking,

insurance, inspection charges, octroi

etc. complete.With External bitumen

& Zinc coating & internal cement

Socket & Spigot Type

Manufacture, Supply & Delivery of

Ductile Iron Flange socket spigot

bends, tees, reducers or any other

specials as per BS-EN-545/1995

Class-A series K12 suitable for use

with D.I. Pipes manufactured as per

IS:8329/1994delivery of specials is

to be made to GWSSB store or site

of works any where in Gujarat

including all taxes,

loading,unloading, carting, stacking,

insurance, inspection charges, octroi

etc. complete.With External bitumen

& Zinc coating & internal cement

motar liningFlanged ended350&

PART-B Lowering, Laying and Fixing

Providing cutting of existing

bituminous surface up to suitable

depth in line and alignment using

Mechanically operated cutter

1 machine before excavating existing 10400.00 51.00 RM

surface for utility laying including

cost of all type of machinery, fuel,

labour etc. and as per direction of

engineer in charge.

Excavation for pipeline trenches for

water supply, sewerage line,

machinehole etc. all with shoring

and struting if required as per

DESCRIPTION Quantity Rate Per Amount

required gradient and line including

safety provision using site rails and

stacking excavated stuff including up

to all required lead cleaning the site

etc. complete for all lifts and strata

Excavation in bitumious road as per

required gradient and line including

safety provision using site rails and

stacking excavated stuff including up

to all required lead cleaning the site

etc. compelete for all lifts as

Excavation in bituminous road

Excavation for pipeline trenches for

water supply, sewerage line,

machinehole etc. all with shoring

and struting if required as per

required gradient and line including

4 safety provision using site rails and 344.00 427.80 CM

stacking excavated stuff including up

to all required lead cleaning the site

etc. complete for all lifts and strata

Excavation for pipe line trenches for

water supply, sewerage line,

machinehole etc. all with shoring

and struting if required as per

required gradient and line including

5 safety provisions using site rails and

stacking excavated stuff including up

to all required lead cleaning the site

etc. complete for all lifts and strata

In all sorts of soil and soft murrum

Providing mantaing upto the

required period safe guarding

6 lightening the excavated trenches 2600.00 12.05 CM

with proper barricading, fencing

with timer balles, bamboos, G.I.

DESCRIPTION Quantity Rate Per Amount

sheets, red fiag and red lights

alongwith the provision of the

chowkidars as directed by Engineer-

Lowering, laying and jointing D. I. S

& S Spun pipes suitable for Tyton

joints / Mortar lined D. I. Pipes of

various classes with CI / MS specials

7 of following diameters in

properposition, grade and alignment

as directed by Engineer-in-charge

including hydraulic testing etc.

Lowering, laying and jointing in

position following C. I. / D/F Reflux

valves, Butterfly valves, Sluice

valves and Air valves including cost

of all labour, jointing material,

including nut bolts and giving

8 satisfactory hydraulic testing, etc.

(1) 600 mm dia PN-1 With gear

operated (Alt-1 type Long body)

(2) 150 mm dia PN-1 With hand

wheel / cap operated (PD type short 7.00 672.75 No

Lowering, laying and jointing in

position following C. I. / D/F Reflux

valves, Butterfly

valves, Sluice valves and Air valves

including cost of all labour, jointing

9 material, including nut bolts and

giving satisfactory hydraulic testing,

Kinetic Air Valve (DK)

Lowering, laying and jointing in

position following C. I. / D/F Reflux

valves, Butterfly

valves, Sluice valves and Air valves

10 including cost of all labour, jointing

material, including nut bolts and

giving satisfactory hydraulic testing,

Providing and casting in situ mass

cement concrete in grade M-10

DESCRIPTION Quantity Rate Per Amount

(approx. corresp. to prop. 1:3:6)

using granite quartzite trap metal of

size 12 mm to 25 mm incl.

consolidation curing etc. complete.

Without Form Work

Providing and constructing brick

work using common burnt clay Fly

Ash building bricks having crushing

12 strength not less than 35Kg/Sq.cm. 102.00 4,511.97 CM

in foundation and plinth incl. racking

out joints, watering etc. as directed

in CM 1:6 (1 Cement:6 corse sand)

Providing & Applying 15 mm thick

plaster in single coat on

brick/concrete walls similar surfaces

for plastering & finished even &

13 smooth with a floating coat of 326.00 237.51 SM

cement slurry mixed with admixture

of lime or neeru in required

proportion etc. comp. in C.M. 1:3 (1

Cement: 3 sand)

Providing and casting in situ C.C. in

grade M-20 (proportions as per mix

design or as per table9 of IS456

2000 in masses by weigh batching )

using granite, quartzite trap metal of

size 6 mm to 20 mm for RCC work,

including scaffolding centering,

14 formwork, needle vibrated 21.00 5,520.00 CM

consolidation, curing complete up to

6 meter depth or height (excluding

cost of reinforcement and neat

finishing) with centering and

shuttering/deshuttering etc. (for

Sluice valve, Scour valve and Air

Valves) With Formwork

Providing & fixing IS Mark TMT

Bar FE 500D reinforcement for

15 R.C.C. work incl. bending, binding 1785.00 76.21 Kg

& placing in position etc. comp.

RCC precast M.H. Frame & Cover

Manufacture, supply & Delivery at

store or at site of work precast RCC

M.200 Frame & cover suitable to

drainage M.H. and as per type design

& Drawing including cost of

reinforcement M.S. Angles or Flat,

curing mold work etc. (a) Heavy

DESCRIPTION Quantity Rate Per Amount

Providing and fixing polyproplene

stepsconfirming to an ASTM D

of size 300 x 150 x 25 mm etc.

Cutting the C.I/D.I. Pipe in pieces as

necessary for fitting the special like

Tee, bend etc. complete.Pipe

thickness up to 10mm

Chamfering D.I. Pipes as necessary

19 for fitting the specials like Tee, Bend

Providing & fabricating the

clamping arrangement for caps,

plugs at the open end of the pipe

20 line inclg. necessary excavation 520.00 90.47 Kg

dewatering if any, welding,

fabrication, nuts, bolts etc comp. as

per engineer in charge.

Providing and casting in situ C.C. in

grade M-15 (approx. corresp. to

prop. 1:2:4) (proportions as per mix

design or as per Table 9 of IS456

2000 in masses by weigh batching )

using granite, quartzite trap metal of

size 6 mm to 20 mm for RCC work,

including scaffolding centering, form

work, needle vibrated consolidation,

curing comp. up to 6 meter depth or

height (excluding cost of

reinforcement and neat finishing)

with centering and

shuttering/deshuttering etc. comp.

for the thrust block inclg. cost of

DESCRIPTION Quantity Rate Per Amount

Making arrangement of flushing

work of laid line as directed by the

engineer in charge and as per the

specification and site condition.

Dewatering by pumping set of

required capacity including

temporary platform carting pumping

at site and fixing the same in

position including all accessories,

and fuel and labour etc. complete.

Refilling the pipeline trenches incl.

ramming, watering, consolidating

24 desposal of surplus stuff as directed 16644.00 25.30 CM

within a radius of 3 km. Refilling as

Demolition/Dismentalling RCC

work or masonary work or removing

of paver block flooring in any part

25 inculuding stacking of

serviceable/useful material and

disposal of unserviceable material

with all lead and lift.

(a) Brick masonary work/Paver

(b) RCC work 25.00 1,057.47 CM

(c) Unreinforce c.c. 25.00 609.26 CM

Warning tape WARMAT ® Brand

PE warning tape with Anti Rodent

Properties ( Con Toxic, Non

Hazardous Eco friendly ROHS

Compliance & 100% recyclable)

26 Moc : LDPE, Roll length : 250 Mtr, 5200.00 31.25 Rmt

Color : Green, Text : Black / White,

Length with non deletable high

(i) Size : 300 mm width x

Work of Temporary diversion of

sewage by plugging the

machineholes at upstream and

downstream of the sewer stretches

27 proposed to be replaced. The rubber

plug required for the plugging the

drainage line shall be procured by

the contractor and the same shall be

the property of contractor.

150mm-400mm sewer line 2.00 20,089.29 Nos.

450mm-600mm sewer line 0.00 20,982.14 Nos. -

700mm-1200mm sewer line 0.00 23,660.71 Nos. -

28 Preparation of as built drawing of 6.00 6,250.00 KM

DESCRIPTION Quantity Rate Per Amount

pipeline laid under this work by

showing location of each and every

pipe in two dimension-horizontal

and vertical with respect to the

existing near by property and / or

permanent structure along with

invert levels of the pipeline with

respect to the GTS benchmark in a

detailed drawing in a scale of 1:400.

The Contractor shall submit two sets

of as built drawings periodically,

without which the subsequent R.A.

Bill of the work will not be

processed payment purpose. On

completion of the entire work the

contractor shall submit as built

drawings for the whole work in six

(6) sets along with two (2) soft

copies as directed by the Engineer-

in-charge. The item includes all

required equipments, materials, man

power for execution of complete

Providing , supplying, Lowering and

Laying in standard length ISI mark

rigid unplasticised PVC pipes

suitable for potable water with ring

fit joint including cost of rings, as

per IS specification no. 4985/1988

including all local and central taxes,

transportation, freight charges,

octroi, inspection charges, loading,

unloading, conveyance to the

departmental stores and including

cost of jointing meterial etc.

Test Pressure 6 Kg/cm2.

DESCRIPTION Quantity Rate Per Amount

Providing & construction simple

chamber of 23 cm. th' B.B.

Masonary in C.M 1:5 with cement

plaster 15 mm th' in C.M. 1:3 inside

& outside to exposed faces, R.C.C.

top slab with 1:2:4 mix ( 1 cement:

Sand : 4 Grade stone aggregate

20mm size) ,Foundation concrete

1:5:10 & fixing precast RCC heavy

duty cover etc. comp. Inside

dimension,455 x 610 mm &450 mm

deep for single pipe

(Extra Rs. 242.39 for avery

additional depth of 0.1 mt. beyoung 2.00 2,681.76 No.

Providing & Installation of

barricades incl. supplying, painting,

with flurescent paint and fixing, CGI

sheets 24 SWG of 1.80 m height &

M.S. posts angle 40 x 40 x 5 mm at

2.0 m c/c and dismantling the same

after complition of work as directed

by Engineer - in - Charge.

Providing & Fixing PVC pipe (SCH-

80) of Prince/ Supreme/Jain/ Astral/

Tulsi/ finolex make for water supply

line at all levels incl. fixture like

bends, tees, shoe etc joined with

resin of approved brand &

manufacture etc. comp. pipe shall be

fixed on the wall the help of clamp at

every two meter C/C or shall be

concealed as directed including

necessary fittings etc. including

testing of pipe and joints and fixing

the same with adhesive solvent,

including cost of all materials

Carting and Recarting of excavted

earth from any site to required place

as per requirement and directed by

engineer in charge

DESCRIPTION Quantity Rate Per Amount

(K) Above 5.0 K.M. & Up To

Drilling of 1300 diameter Horizontal

borehole for water main pipeline

crossing under the

road/canal/highway including in all

strata with required length including

providing & fixing of 1200 mm

inner diameter 16 mm thickness

M.S. casing pipe with pushing etc.

complete for 600 mm diameter DI

Without Water main & with

Providing and fixing of MS Casing

Pipe of following diameter

mm Dia OD 16 mm thicknes

Drilling of 1300mm dia Horizontal

borehole for watermain pipeline

under the railway tracks incl all

strata with requried length incl

Providing and fixing of 1232 mm dia

OD M.S.casing pipe of minimum

mm thick Casing Pipe with welding

pushing etc complete & fixing

various size of pipe for 600 mm dia

watermain of DI pipe for railway

permises as per instruction &

regulations of Railway authority &

under supervision of Railway

authority incl Provinding, supplying

& fixing of spacer at specified

interval if required between Casing

pipe and water main,providing &

fixing of ISI make sluice valve of

required size at both side of railway

boundry with construction of

brickedge pavement incl C:C

encasing 1:3:6 in 10mtr length of

pipe at both side. Incl Provinding &

fixing of M.S/Iron Manhole frame

with cover for valve chamber with

loacking arregment etc. complete

with all material labour

fabrication,hydraulic testing of pipe

& valve etc complete.Without

Water main, With Providing and

DESCRIPTION Quantity Rate Per Amount

fixing of 1232 mm Dia OD 16 mm

For DFCC crossing 100.00 45,423.67 RMT

For Gothan Railway Crossing 100.00 45,423.67 RMT

Empty boring through all.sort of

strata for providing 0.5 MT dia.

R.C.C bored piles to required depth

36 including providing necessary 20.00 1,610.63 Rmt.

casting pipe with all plants and

equipments as required completed.

(for Truss Bridge)

Providing and Casting in situ mass

cement concrete in grade M10

proportion 1:3:6 (1 cement :3- coarse

sand : 6- graded stone aggregate of

40 mm nominal size)using granite

quartzite trap metal of size 12mm to

25mm including consolidation

curing etc. complete

Truss Bridge 10.00 3,662.00 CM

Providing and cast in situ C.C. in

grade M-30 proportions of

ingredients as per mix design by

weigh batching using granite,

quartzite trap metal of size 12 mm to

20 mm and or 6mm to 12 mm

38 including scaffolding centering

formwork, needle vibrated

consolidation, curing and hydraulic

testing etc. complete (excluding cost

of reinforcement) with centering and

shuttering/deshuttering etc. comp up

to 6 meter height/depth av G.L.

Pile for truss bridge 10.00 6,905.00 CM

Pilecap for truss bridge With

Pedestals for truss bridge 10.00 8,213.00 CM

DESCRIPTION Quantity Rate Per Amount

Providing & fixing IS Mark TMT

Bar FE 500D reinforcement for

39 R.C.C. work incl. bending, binding

& placing in position etc. comp.

Truss Bridge 10.00 76.21 Kg

Steel work welded in built up

section, framed work including

cutting, hoisting fixing in position

and and applying a primimg coat of

read lead paint (A)in beams and

40 joists, channels angles Tees, flats, 5.00 90,478.63 MT

with connecting plates or angle

cleats as in main and cross beams.

Hip and jack rafters, purlins

connected to common rafters and the

Executive Engineer,

Drainage Department,

Surat Municipal Corporation,

SIGNATURE OF THE CONTRACTOR :-