8495 REPAIR TO TOILET INCLUDING SUNKEN FLOORS,WASTE WATER PIPES, SANITERY FITTINGS, PLINT PROTECTION ,BROKEN RCC CHAJJAS AND MICS WORK AT NSTL VISAKHAPATNAM AND DRDL KALINGA.

Amount

Repairs to existing sunken floor to be done as given following courses :-

Demolition out and removing sunken floor filling and depositing the same at a distance n exc 250m away from the outer edge of bldg complete all as directed by Engineer-in-Chage

M&L for applying two coats of epoxy resin coating polymer modified coating to a thickness of 1 mm incl preparation throuly without any traces of dirt or luitance as in sunken floors complete all as specified and as directed by Engineer-in-Charge. (Using NITOBOND Chemical First coat 1:2:3 (Nitobond 1 Ltrs : water 2 Ltrs : Cement 3 Kg) NITOBOND Chemical second coat 1:3 (Nitobond 1 Ltrs : Cement 3 Kg)

M&L 15 mm thick protective plastering in CM 1:4 (using and complete all as sp mixed WPC 150 ml per cement bag) specified and as directed by Engineer-in-Charge.

M&L PCC with 40 mm graded stone aggregate D2 1:4:8 as in sunken floors complete all as specified and as directed by Engr-in-Charge. (Liquid water proofing compound will be measured in separate item)

M&L Non skid coloured ceramic tiles 7 to 8mm thick area of each tile exc 0.06sqm but n exc 0.11sqm in floors etc set and jointed in neat cement slurry and pointed in white cement to match, over and including 15mm thick screed bed in CM (1:4) laid over and including 25mm thick PCC (1:2;4) type B-0 using 12.5mm graded crushed stone aggregate,complete all as specified and directed

Supply only liquid water proofing compound

S&F in repairs vitreous China squatting pan, Orissa pattern, size 580x440mm, white with integral foot rests, 'P' or 'S' trap including provision of lime concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match complete all as directed.

S&F PVC (SWR) pipe 110mm bore, single socketed in any length with rubber ring joints fixed to walls complete all as directed.

S&F PVC (SWR) pipe 75mm bore, single socketed in any length with rubber ring joints fixed to walls complete all as directed.

S&F PVC (SWR) reducers 110/75mm bore complete all as directed.

S&F 110mm bore PVC (SWR) junction, single (Single T) equal or un equal

S&F PVC (SWR) bends 110mm bore, any radius complete all as directed.

S&F PVC (SWR) bends 75mm bore, any radius complete all as directed.

M & L for 50mm bore pipe of High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc incl ends, elbows, unions, tees, reducing tees, adoptors, sockets, plugs, hose clips etc.complete all as specified and directed.

S&F PVC (SWR) vent cowl 75mm dia.

S&F PVC (SWR) vent cowl 110mm dia.

S&F in repairs PVC (SWR) floor trap plain with grating including jointing with solvent cement 75mm dia outlet.

M&L Jointing only cast iron pipes and fittings or AC pipes and fittings with PVC pipes, in repairs, with cement joints etc all as specified and directed by Engineer-in-charge

S&F in repairs PVC valve less, syphonic action type, flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle, brackets complete including PVC connection and outlet pipe all as directed. [Make: 'Slim line' of M/s Parry ware/ 'Champion' of M/s Hindustan Sanitary ware/ 'Sleek+' of M/s Hindware]

S&F in repair vitreous china white flat back wash hand basin 550 x 440mm size including 15mm dia PVC connection 600mm long, brass CP waste coupling, 32mm dia PVC waste pipe, CI/MS brackets including cutting for and pinning in brackets or fixed with brass screws all as directed.

S&F in repairs vitreous china ware wash down water closet pan (pedestal pattern) white including PVC seat cover with mild steel chromium plated or aluminized hinging device, fixing bolts jointing to flushing cistern and flush pipe anti syphonage pipe etc complete all as specified and directed

S&F in repairs vitreous china urinals half stall type complete including urinal spreader pipe, providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in white cement all as specified.

S&F in repairs to walls/chases/celling or laying in floors polythylene aluminium polythylene (PE-AL-PE) composite pressure pipes including all crimp type internal sealing plastic material composite fitting (such as elbow, tee, reducers, coulers, short pieces, connectors etc) and hooks (in case of concealed pipes) clamps (in case of exposed pipes) complete 16 mm dia (outer) all as specified and directed.

S&F 15mm Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed in repairs all as specified. (Minimum weight 90gms)

S&F 15mm Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed in repairs all as specified. (Minimum weight 110gms)

S&F 15mm angle valve any colour high pressure screwed for iron pipe and fixed in repairs all as specified. (Minimum weight 110gms)

S&F 15mm Stop valve of PTMT with long shank and cup (concealed type) any colour high pressure screwed for iron pipe and fixed in repairs all as specified. (Minimum weight 110gms)

S&F in repairs brass chromium plated Towel rail 'D' type, 600mm long complete with wall brackets all as specified and directed.

S&F in repairs stainless steel cockroach trap grating 125 mm dia with /without hole for drain pipe complete all as directed.

S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm all as specified. (Make: NIRALI/ANUMOL).

S&F in repairs 15mm dia Pillar taps, cast copper alloy, with long neck, chromium plated fancy type with aerator, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. [Cat No. CON-021KN of make: Jaquar or equivalent in Marc/ Plumber]

S&F in repairs 15mm dia angle valve cast copper alloy fancy type chromium plated with crutch handle and wall flange complete all as specified and as directed. [Cat No. CON-059KN of make: Jaquar or equivalent in Marc/ Plumber]

S&F in repairs 15mm dia stop valve concealed type cast copper alloy fancy type chromium plated with crutch handle and adjustable wall flange including dismantling portion in the wall as required including making good to match with existing complete all as specified and as directed. [Cat No. CON-083KN of make: Jaquar or equivalent in Marc/ Plumber]

S&F in repairs Bib taps, 15mm bore, cast copper alloy, chromium plated with crutch handle, short body with wall flange, screwed down, screwed for iron pipe or for brass ferrule all as specified and as directed. [Cat No. CON-047KN of make: Jaquar or equivalent in Marc/ Plumber]

S&F in repairs Bib taps, 15mm bore, cast copper alloy, chromium plated with crutch handle, long body with wall flange, screwed down, screwed for iron pipe or for brass ferrule all as specified and as directed. [Cat No. CON-107KN of make: Jaquar or equivalent in Marc/ Plumber]

S&F in repairs cast copper alloy, chromium plated 2 way bib cock 15mm dia with crutch handle with wall flange complete all as directed. [Cat No. CON-041KN of make: Jaquar or equivalent in Marc/ Plumber]

S&F in repairs hand shower (Health Faucet) (ABS Body) with 1 meter long easy flex tube in chrome finish & wall hook complete all as directed. [Cat No. ALD-CHR-585 of make: Jaquar or equivalent in Marc/ Plumber]

S&F in repair brass chromium plated Soap dish complete all as directed. [Cat No. AQN-7731 of make: Jaquar or equivalent in Marc/ Plumber]

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as directed.

M&L for glazed ceramic digitally printed tiles of size 300x450mm, 7mm thick in vertical surfaces of wall, set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 10mm thick backing coat in CM 1:3 complete all as specified.

M&L for vitrified tiles, double charged, first quality of size 600x600mm, 9 to 10mm thick as in Floors, set and jointed in cement slurry, finished with flush pointing in coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed. [Note: The colour / shade / design of tiles shall be as approved by AGE (I)]

M&L for vitrified tiles, double charged, first quality for skirting cut from tiles of size 600x600mm, 9 to 10mm thick, to suit the size of floor tile, set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles over and including backing coat of 10mm thick in cement mortar 1:3 complete all as specified and as directed. [Note: The colour / shade / design of tiles shall be as approved by AGE (I)]

M&L for preparation of old decorated surfaces of walls and cornices by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying one coat of white wash complete all as specified and as directed.

M&L for preparation of old decorated surfaces of ceilings by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying one coat of white wash complete all as specified and as directed.

M&L for preparation of old distempered surfaces of walls and cornices by washing, rubbing down and stopping of surfaces and applying one coat of distemper oil emulsion complete all as specified and as directed.

Taking down Chowkats or frame not exc 1.5Sqm each with shutters (without taking off shutters from the frames), all as specified.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube complete all as specified inSSR Part-II section -8 and directed by Engineer -In-Charge.(Make-Sintex/Rajshree wood plastic limited/Nandi/National)

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, & S & F in the frame at site as per specification and as directed by Engineer-in-Charge. (Make-Sintex/Rajshree wood plastic limited/Nandi/National)

S&F MS butt hinge cold rolled medium weight 100mm size

S&F anodised aluminium barrel tower bolt 150mm long.

S&F 'D' type handle aluminium anodized 125mm in size.

S&F Aluminium Sliding Bolt of Size 200mm

M&L for uPVC factory made, white colour louvered ventilators made of extruded profiles with figured/ frosted glass louvers; profiles of frames and sash will be mitred cut and fusion welded at all corners including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2 ± 0.2mm thick galvanised steel profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners complete as directed by the Engineer-in-charge.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories)

Demolition of PCC of any description in any position

M&L PCC type B0 1:2:4 (12.5mm graded aggregate) Providing, cement concrete in roof kerbs of mud stops, rounded or chamfered on edges in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directing

S&F UPVC Soil, Waste pipes Type 'B' conforming to IS 13592-1992, 150mm internal dia single socketed in any length with rubber ring joints fixed to walls complete including taking down existing pipes all as directed.

Taking down cement or cement lime plaster on brick or stone walls etc incl raking out joints, hacking for key scrubbing down with water etc.

M&L rendering 5mm thick with WPC over 10 mm thick on concrete surfaces or fair face of brick work or PCC block masonry in CM 1:4 finishing the surfaces fair and even

M&L for preparation of new plastered surfaces of walls and applying two coats of weather proof exterior emulsion over a coat of exterior primer complete all as specified. [Make of Exterior emulsion: 'Weather Shield Powerflexx' of M/s ICI Dulux/ 'Apex Ultima' of M/s Asian Paints/ 'WeatherCoat Long Life' of M/s Berger Paints]

M&L for preparation of new surfaces of walls over alkali resitant primer & applying two coats of cement base paint.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth.

M&L for preparing new plastered surfaces of ceiling and applying three coats of white wash.

Taking up or down galvanized steel tubing 15mm bore with fittings.

Taking up or down galvanized steel tubing 20mm bore with fittings.

Taking up or down galvanized steel tubing 25mm bore with fittings.

Taking up or down galvanized steel tubing 40 or 50 mm bore with fittings.

S&F GI tubes 15mm bore dia medium grade galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F GI tubes 20mm bore dia medium grade galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F GI tubes 25mm bore dia medium grade galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F GI tubes 50mm bore dia medium grade galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laid in floors complete all as specified.

Refixing of steel tubing 15mm and connecting in new or old position wall ceiling floors etc.

Refixing of steel tubing 20mm and connecting in new or old position wall ceiling floors etc.

Refixing of steel tubing 25/32mm and connecting in new or old position wall ceiling floors etc.

Refixing of steel tubing 40/50 mm and connecting in new or old position wall ceiling floors etc.

Chipping of unsound/weak concrete material in patched n exc 10 Sqm for 15mm average thickness from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. complete with necessary scaffolding/ staging and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge

Cleaning of reinforcement in pathes n exc 15RM from rust from the reinforcing bars of dia upto 12mm to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.

M & L for mixing and applying SBR polymer modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) 15mm average thickness in three layers as per specifications and directions of Engineer-in-charge Note: Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument.

Cutting down the plants/ trees of girth n.exc. 15cm from roof tops/ sides of external walls of building, chajja, wall junctions & at junctions of rain water/ waste water pipes including taking out the roots entered in to wall/ slab surfaces; making good surfaces with PCC 1:2:4 type B0 or cement mortar (1:2) including repairing the GI/ CI/ PVC pipe joints which were affected due to cutting/ taking out process after applying suitable herbicide including making good the disturbed surfaces to match the adjoining surfaces complete with necessary scaffolding/ staging/ Jhula etc, with all necessary safety precautions up to 4 storey height complete all as directed and as specified.

Taking down cement plaster on brick work or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.

M&L for rendering 15mm thick in CM (1:4) in patches n.exc. 3sq.m. each patch on concrete/ brick masonry surfaces, including mixing water proofing compound, finished even and smooth without using extra cement complete all as specified and as directed. (NOTE: Supply only water proofing compound shall be measured and paid separately under relevant item.)

M&L for preparing the new plastered surfaces of walls, applying a coat of exterior primer, 2mm thick putty including sand papering the puttied surfaces to form an even and smooth surface and applying two or more coats of premium acrylic emulsion paint with alkali & fungal resistance, disrt resisstance complete all as specified.

M&L for demolition of existing RCC chajjas of approximate size 1.50m (L) x 0.60m (W), scrapping the existing reinforcement, renewal of rusted reinforcement bars as required and providing RCC 1:2:4 type B1 as in chajja including use & removal of form work to soffit and edges, plastering the soffits of chajja with 5mm thick in CM 1:3 and sides & top with 15mm thick in CM 1:4 complete including applying finishes to match with the existing finishes all as specified and as directed. [Note: Supply only steel reinforcement bars shall be measured & paid separately]

Supply only high strength deformed TMT steel bars of any dia all as specified and as directed.

M&L for applying anti corrosive primer @ 0.25 Ltrs/sq.m for the exposed old and new reinforcement bars of any dia to the full circumference and length of bars to form an unbroken 40 micron thick film (DFT) complete all as per manufacturer's instructions. [Make: 'Nitozinc Primer' of make: M/s Fosroc Chemicals India (P) Ltd. or equivalent in M/s Pidilite Industries Ltd./ M/s Sika India Pvt. Ltd./ M/s Structural Water Proofing Co. Pvt. Ltd./ M/s BASF India Ltd.]

Supply only integral water proofing compound conforming to IS: 2645-1975.

M&L for filling the existing cracks on plastered surfaces of walls by using Dr. Fixit Crack-X Shrinkfree compound incl preparation of surfaces before application by opening the cracks and cleaning off the dust, dirt etc. for ease of application of paste all as per manufacturer's instructions and making good surfaces all as directed.

PRADEEP ENTERPRISES

HARSHITHA INFRA

B SRINIVAS

Sri krishna constructions

M/S REAL POWER SYSTEMS

YEDLA SURESH NAIDU

K R VARMA

RAVI VARMA JAMPANA

ROHITH INFRA

SRIVALLI ENGINEERS

cevelworck